dessoft hookups bom, how to
TRANSCRIPT
© 2010 DesSoft
Hookups and Bill Of Materials
Version: 1.0.0
All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, ormechanical, including photocopying, recording, taping, or information storage and retrieval systems - without thewritten permission of the publisher.
Products that are referred to in this document may be either trademarks and/or registered trademarks of therespective owners. The publisher and the author make no claim to these trademarks.
While every precaution has been taken in the preparation of this document, the publisher and the author assume noresponsibility for errors or omissions, or for damages resulting from the use of information contained in this documentor from the use of programs and source code that may accompany it. In no event shall the publisher and the author beliable for any loss of profit or any other commercial damage caused or alleged to have been caused directly orindirectly by this document.
Printed: January 2010 in Eldoraigne, South Africa
Hookups and Bill Of Materials
© 2010 DesSoft
Publisher Special thanks to:
All the people who contributed to this document.DesSoft
3Contents
© 2010 DesSoft
Table of Contents
Foreword 0
Section I Hookup Template 6
Section II Hookups 10
................................................................................................................................... 101 User Interface
................................................................................................................................... 122 Exercise
Section III Hookup Standards 16
................................................................................................................................... 161 Exercise
Section IV Hands-On 20
Index 0
Hookups and Bill Of Materials
DesSoft - Engineering Design Documentation Software
Section
I
6 Hookups and Bill Of Materials
© 2010 DesSoft
1 Hookup Template
We will not be designing the entire hookup template from scratch.
1. Click on the Go Button > Templates.2. In the Templates List, click the Hookups tab.3. In the Templates List, open the Flow Transmitter.dgm template.4. Draw the hookup below in the space provided on the template, using the functions in the
Draw Shapes ribbon bar.
7Hookup Template
© 2010 DesSoft
Hookups and Bill Of Materials
DesSoft - Engineering Design Documentation Software
Section
II
10 Hookups and Bill Of Materials
© 2010 DesSoft
2 Hookups
2.1 User Interface
Hookup Details Tab
· Hookup Document Details - All information regarding the document is entered/selectedhere.
· Hookup Items List - Lists all the items that are associated with the current hookup.· Hookup Standards List - Lists the Hookup Standards in the project.
Associate Tag Numbers Tab
11Hookups
© 2010 DesSoft
· Associated Tag Numbers - Lists the tag numbers that are already associated with thehookup.
· Available Tag Numbers - Lists the tag numbers that have not been associated to anyhookup.
12 Hookups and Bill Of Materials
© 2010 DesSoft
2.2 Exercise
Create a hookup and populate it with data.
1. Click on the Go Button > Hookups.2. In the Hookups ribbon bar, click on New.3. Under Tag Number, enter Hookup-01.4. Click Ok.5. Under Hookups Templates, select Flow Transmitter.dgm.6. Under Drawing Name, enter Hookups Training.7. From the Hookup Standards List, select the following hookup items and add them by
clicking the left arrow.
HookupSTD Quantity
2 Way Pratley Box 1Flow Element 1Flanges 2Gland20-2 2Cable Tie 4Angle25 2Stand Instrument 1Flow TX 1
8. Click on the Associate Tag Numbers tab.9. Under Available Tag Numbers, double click on 20-FT-01 to associate it with the hookup.10. In the Hookup Actions ribbon bar, click Save.11. In the Hookup Actions ribbon bar, click Preview to create the hookup and view it.
13Hookups
© 2010 DesSoft
Hookups and Bill Of Materials
DesSoft - Engineering Design Documentation Software
Section
III
16 Hookups and Bill Of Materials
© 2010 DesSoft
3 Hookup Standards
3.1 Exercise
1. In the menu bar, click View.2. In the Standards Editors ribbon bar, click Hookup Standards.
You can add/delete/modify/copy hookup standards here.
1. Click Add.2. In the HookupSTD field, enter Enclosure.3. In the Description field, enter Epoxy coated housing.4. In the HType field, enter HOUSING.5. Click OK.6. Open Hookup-01 from the Hookups module.7. In the Hookup Standards List, filter the HookupSTD field for "enclosure".
17Hookup Standards
© 2010 DesSoft
Hookups and Bill Of Materials
DesSoft - Engineering Design Documentation Software
Section
IV
20 Hookups and Bill Of Materials
© 2010 DesSoft
4 Hands-On
1. Create a hookup document for 100-TT-05 to 100-TT-14.2. Add the hookup standards shown below in the order they are given. Create any Hookup
Standards that do not exist.
Description Quantity
RTD/Temp TX Assemblies Complete 1
Temperature Transmitter 1
Thermowell 1
Nipple-Union-Nipple Extention 1
Instrument Signal Cable 1
Tie Wire SS 1
Engraved SS Tag 30 mm DIA 1
DN15 BSPT Nipple 1
DN 20 FixedW.P Conduit (Galvanised) 2