detailed - eth zürich · 09.2006 – 07.2012 senior researcher, measurement engineer, adr keynote...
TRANSCRIPT
Detailed
Curriculum vitæ
Dr. Ing. V. K. Dertimanis
Chair of Structural Mechanics
ETH Zürich
January 2019
2
Contents 1. Curriculum vitæ (resume) ........................................................................................................... 3
1.1. Personal information ......................................................................................................................... 3
1.2. Current Position ................................................................................................................................ 3
1.3. Professional experience ..................................................................................................................... 4
1.4. Education and training ...................................................................................................................... 5
1.5. Training and further education .......................................................................................................... 6
1.6. Languages ......................................................................................................................................... 6
1.7. Computer Skills ................................................................................................................................. 6
2. Academic and research activities ................................................................................................ 8
2.1. ETH Zürich ......................................................................................................................................... 8
2.2. National Technical University of Athens ........................................................................................... 10
2.3. Technical Reviewer .......................................................................................................................... 11
2.4. Journal Editorial Activities ............................................................................................................... 12
2.5. Peer – review of research proposals ................................................................................................ 12
2.6. Research projects ............................................................................................................................ 12
2.7. Academic Events Organization ......................................................................................................... 13
2.8. Invited Presentations & Talks .......................................................................................................... 14
3. Professional activities ............................................................................................................... 15
3.1. Structural vibration analyst ............................................................................................................. 15
3.2. Measurement engineer ................................................................................................................... 15
3.3. ADR Inspector ................................................................................................................................. 16
3.4. Speaker in seminars ........................................................................................................................ 16
3.5. Design, analysis and construction of metallic tanks and fixed-tank vehicles ...................................... 17
4. List of publications .................................................................................................................... 18
4.1. Books .............................................................................................................................................. 18
4.2. Book chapters ................................................................................................................................. 18
4.3. Journals .......................................................................................................................................... 18
4.4. International Conferences ............................................................................................................... 20
4.5. Conferences (poster/presentation only) .......................................................................................... 27
APPENDIX: CATALOG OF ACADEMIC & RESEARCH PROJECTS (2002 - 2013) .................................... 28
3
1. Curriculum vitæ (resume)
1.1. Personal information
Surname Ntertimanis
Name Vasileios
Father name Konstantinos
Mother name Dimitra
Date/Place of Birth 02.09.1976, Athens, Greece
Military Service Hellenic Air Force Academy, Cessna T–41 Engineer
Family Status Married, father of two children
Home Address Isengrundstrasse 12
8134 Adliswil
+41 78 649 44 99
Work Address ETH Zürich
Institute of Structural Engineering (IBK)
Stefano-Franscini-Platz 5
8093 Zürich
+41 44 633 79 45
1.2. Current Position
05.2017 – Oberassistent und Dozent, ETH Zürich, Institute of Structural Engineering (IBK),
Chair of Structural Mechanics
4
1.3. Professional experience
01.2014 – 04.2017 Research Associate, ETH Zürich, Institute of Structural Engineering (IBK), Chair
of Structural Mechanics
11.2012 – 11.2013 Marie Curie Experienced Researcher, SmartEN ITN Programme, Cyprus
University of Technology
Research in signal processing, event classification, structural health
monitoring, life-cycle assessment of structures and infrastructures, urban
climate monitoring and structural degradation.
05.2010 – 10.2012 Senior Researcher & Vibration Analyst, Laboratory for Earthquake Engineering,
National Technical University of Athens
Research in structural vibration analysis, experimental earthquake
engineering, structural identification, structural health monitoring, hybrid
testing.
Vibration analysis in shaking table tests.
Tutor in postgraduate courses.
01.2012 – 10.2012 Senior Researcher, Laboratory for Machine Elements, National Technical
University of Athens.
Research in accelerated fatigue tests on PZT patches attached to steel beams
for determining the gradual degradation of the actuator: establishment of
relationship between fatigue and dissipated power; specification of a
suitable performance index that combines the electrical with the mechanical
response of the system. Design of vehicle bumpers from mineral matrix
composites. Model–based identification and useful life estimation of rolling
bearings.
09.2006 – 07.2012 Senior Researcher, Measurement Engineer, ADR Keynote Speaker and
Inspector, Vehicles Laboratory, National Technical University of Athens.
Research in vibration analysis of heavy vehicles, structural optimization,
structural identification, structural health monitoring.
Tutor in graduate and postgraduate courses and co-supervisor of diploma
and postgraduate Theses.
Structural testing in accordance to EN ISO/IEC 17025:2005.
Training of Inspectors, Safety Advisors and Drives in accordance to ADR
Regulations.
5
Inspection, testing and type approval of fixed-tank vehicles in accordance to
EN 12972 και of vehicles carrying explosive articles and substances in
accordance to ADR.
12.2000 – 05.2007 Freelancer Engineer
Design, analysis and construction supervision of fixed-tank vehicles for the
carriage of flammable liquids and of vehicles carrying explosive articles and
substances.
1.4. Education and training
1.4.1. PhD
Dates 02.2001 – 09.2006
Institute National Technical University of Athens
School Mechanical Engineering
Section Mechanical Design & Automatic Control
Laboratory Vehicles
Title Modelling and Identification of Faults in Mechanical Systems
Committee Prof. C. Spentzas (supervisor)
Prof. I. Antoniadis
Prof. C. Provatidis
Prof. E. Papadopoulos
Prof. N. Krikelis
Prof. Μ. Sfantzikopoulos
Ass. Prof. S. Diplaris
1.4.2. Diploma
Dates 09.1995 – 09.2000
Title Mechanical Engineer
Grade «Very Good» (7.09)
Institute University of Patras
School Mechanical Engineering
Section Constructions (CAD/CAM)
Diploma Thesis
Title Identification of a servomotor system
Supervisor Prof. S.D. Fassois
6
Grade Excellent (10)
Student Project Thesis
Title Solving Differential Equations with Laplace & Fourier
Transforms
Supervisor Ass. Prof. E. Manatakis
Grade Excellent (10)
1.4.3. Primary / Secondary Education
1981 – 1987 9th Ilion Primary School
1987 – 1990 5th Ilion Gymnasium
1990 – 1993 5th Ilion Lyceum
1.5. Training and further education
10.2005 ADR Inspector, Greek Ministry of Greek Ministry of Transport
and Communication
10.2003 Dangerous Goods Safety Advisor, National Technical
University of Athens
1.6. Languages
Greek
Mother tongue
Listening Reading Speaking Writing
English C1 C1 C1 C1
German A2 B1 A2 B1
1.7. Computer Skills
Operating Systems Windows, Ubuntu
Desktop Applications Open Office , MS Office
Typesetting Systems LaTeX
Networks Administrator (basic skills)
Web Design HTML/CSS/JavaScript (basic skills)
Programming Python/Java (basic skills)
Computational Environments MATLAB / Simulink(1), Octave, ANSYS Design Space(2), MSC
7
Adams(3), CSI SAP2000
2D/3D Design Autodesk AutoCAD, Autodesk Inventor
Vehicle Dynamics CarSim / TruckSim(4)
Measurement Software(5) NI LabView, HBM Catman, GARTNER
(1) Design and implementation of a TOOLBOX, fully compatible with the latest releases of Mathworks,
which includes among others:
Over one hundred new commands for:
o Creation and analysis of linear systems
o Creation and analysis of distributed systems
o Optimization
o Non – parametric and parametric identification
o Statistical and spectral processing of multivariate time – series
Complete documentation, in the framework of other MATLAB Toolboxes. The
documentation includes analytical theory for the aforementioned fields, examples and
references.
Excellent cooperation to other MATLAB Toolboxes.
Automated install / uninstall.
Versioning scheme. (2,3,4) Attendance of related seminars (certifications are available). (5) Data acquisition with corresponding equipment, including:
DAQ cards: PCMCIA-6036, PCI-6023E, PCI-7344
DAQ units: SPIDER, MGCplus, GARTNER
Connectors and amplifiers: BNC 2090, CB - 68LP, UMI – 7744, KISTLER, PCB (single and
multichannel)
Sensors:
o Uniaxial and triaxial KISTLER και PCB acceleration sensors
o Wireless acceleration sensor networks
o Uniaxial HBM acceleration sensors
o Triaxial MEMS acceleration and inclination sensors
o Strain - gauges: single, crosses, rosettes, Wheatstone bridges
o Torque sensors
o Load cells
Structural Excitation:
o MTS shaking table, shakers and impulse hammers.
8
2. Academic and research activities
2.1. ETH Zürich
2.1.1. Courses
Lecturer for the following Master courses:
Identification Methods for Structural Systems (2014–), under the Master Program in Civil
Engineering (50%).
Structural Dynamics and Vibration Problems (2017–), under the Master Program in Civil
Engineering (25%).
Lecturer for the following short courses:
Uncertainty Quantification & Data Analysis in Applied Sciences, 6-17 March 2017, ETH
Zurich.
Uncertainty Quantification & Data Analysis in Applied Sciences, 19-29 March 2018, ETH
Zurich.
Structural Health Monitoring and Dynamic Identification of Structures, 23-26 September
2014, University of Bergamo, Italy.
2.1.2. Theses
PhD Thesis Committee:
[1] Espinosa, M.G., Risk estimation of rocking components subjected to ground motions,
University of Oxford, 2018.
Instructor of PhD students:
[1] Zaccherini, R., Metastructures for Seismic Vibration Attenuation, ongoing.
[2] Tatsis, Κ., Physical-based Reduced Order Models for Wind Turbine condition Monitoring,
ongoing.
[3] Martin-Sanz, Η., Getting more out of Structures through monitoring and simulation, ongoing.
[4] Ou, Υ., Vibration-Based System Identification and Damage Detection for Structural
Components of Wind Turbines, ongoing.
[5] Leyder, C., Structural global response of an innovative post-tensioned timber building,
successful defend on 20.01.2018.
[6] Miah, M, Semi-active control for Magnetorheological (MR) dampers via coupling of System
Identification (SI) methods, successful defend on 22.06.2015.
9
Instructor of Master Theses:
[1] Hoelzl, C., Assessment of the railway substructure, 2018.
[2] Ciliberti, A., Condition assessment of bridges using monitoring data, Alma Mater Studiorum,
University of Bologna, 2018.
[3] Aguzzi, G., Investigation of Layered Metafoundations for Seismic Waves Attenuation, Alma
Mater Studiorum, University of Bologna, 2017.
[4] Gabbianelli E., Layered Periodic Metafoundations for Seismic Isolation, Alma Mater
Studiorum, University of Bologna, 2017.
[5] Schindler, J. Fatigue Assessment of a steel truss girder bridge: structural identification and
monitoring setup, 2016.
[6] Werner, S., Fatigue Assessment of a Steel Truss Girder Bridge: Finite Element Modelling and
Moving Mass Analysis, 2016.
[7] Wagner, P.-R., Robust to uncertainties optimization of metastructures for seismic hazard
mitigation, 2016.
Supervision of Master Projects:
[1] Baumann, M., Beeler, L. and Bühler, M., Zerstörungsfreie Prüfmethoden zur frühzeitigen
Erkennung von Schäden in der Wasserabdichtung von Brückenbauwerken, 2018.
[2] Henschel, M., Damage Detection for Wind Turbine Blades under varying environmental
conditions, 2017.
[3] Zhu, N., Damage Detection for Wind Turbine Blades under varying environmental conditions,
2017.
[4] Bernhard, P. and Galkovski, T., Fatigue Assessment of Orthogonally Reinforced Concrete
Slabs, 2016.
[5] Konradi, D. and Hiegermoser, D., Identification of Time-Varying Structural Systems /
Identification of moving forces, 2016.
[6] Diethelm, J., Ottinger, D., Romer, F., Construction of a Drop-Weight Device for Bridge
Testing, 2015.
[7] Wagner, P.-R., Design of a metamaterial for seismic hazard mitigation, 2015.
[8] Lee, M. and Lampach, L., Vibration-based damage detection for structures, 2015.
[9] Psychari, A., Vibration Mitigation of a 5-story Shear Frame using a Magnetorheological
Damper solution, 2014.
10
Supervision of Bachelor Projects:
[1] Evers, J and Fehr, M., Extension of the Online Platform of the House of Natural Resources,
2018.
[2] Rämi, B. and Schiavi, R., Designing an online platform for a SBB bridge in Sempach, 2018.
[3] Steffen, C. and Mesaric, R., Design of an Online Platform for the monitoring of the House of
Natural Resources, 2017.
[4] Marketsmüller, M., Milojevic, N. and Rüegg, J., Continuous Modal Tracking of the House of
Natural Resources, 2017.
[5] Beeler, L. and Bissig, D., Vehicle-Bridge Interaction Apparatus, 2016.
[6] Hefti, F. and Stutz, D., Vibration testing of scaled frame structures with different stiffness
and damping properties, 2015.
2.2. National Technical University of Athens
2.2.1. Courses
Teaching assistant for the following Bachelor courses:
Design for Manufacturing (2001 – 2002)
Computational Methods in Structures (2003 – 2004)
Mechanisms and Introduction to Machine Design (2002 – 2006)
Vehicle Computational Project (2006 – 2007)
Vehicles Design II (2005 - 2009)
Co-Instructor for the following Master courses:
Systems Optimization (2004 – 2009), under the Automation Systems postgraduate program.
Experimental Earthquake Engineering (2010 - 2012), under the Design and Analysis of
Structures postgraduate program. For the course, I have co–authored the following
supplementary course notes:
H.P. Mouzakis and V.K. Dertimanis, Experimental Earthquake Engineering, National Technical
University of Athens, Greece, 2012.
MATLAB Semester Course (2011 – 2012), under the Protection of Monuments, Sites and
Complexes postgraduate program.
2.2.2. Theses
Supervision of Master Theses:
[1] Makris, G., Tank–Vehicle's Dynamic Behaviour Modelling and Optimization, 2009.
[2] Drosos, H., Articulated Tank–Vehicle's Suspension Optimization, 2008.
11
[3] Salteris, A., Modelling and Optimization of Structural Characteristics in Heavy Vehicles, 2008.
[4] Giakakoglou, S. and Bougesis, G., Measurements of Vehicles' Dynamic Performance
Elements, 2005.
[5] Tsantilas, P., Design of Fiber Reinforced Tanks for the Carriage of Dangerous Goods, 2003.
Supervision of Bachelor Theses:
[1] Blassopoulos, K., Optimization of Dynamic Characteristics in Triaxial Semi–Trailer Tank–
Vehicle, 2008.
[2] Fragkiadoulakis, N., Modelling of an Articulated Tank–Vehicle, 2007.
[3] Daoutis, G., Tank Design for the Carriage of Bitumen According to Standards, 2006.
[4] Dourambeis, N., Experimental Stress Analysis using Strain Gauges, 2006.
[5] Giantsis, P., Testing Apparatus Installation for the Determination of Stress State in Tank
Intended for the Carriage of Flammable Liquids, 2004.
[6] Salteris, A., Experimental Determination of Stress State in Tank Intended for the Carriage of
Flammable Liquids, 2004.
[7] Petropoulos, N., Section Calculation of a Tank Intended for the Carriage of Flammable
Liquids, 2004.
[8] Petrou, E., A Testing Apparatus for the Guidance and Modelling of a Flexible Robotic Arm,
2003.
[9] Blassopoulos, G., Analysis Methodologies in Mechanical Systems, 2002.
2.3. Technical Reviewer
Board of reviewers for:
Advances in Mechanical Engineering (SAGE)
Applied Sciences (MDPI)
Bulletin of Earthquake Engineering (Springer)
Frontiers in Built Environment (Frontiers)
International Journal of Automotive and Mechanical Engineering (IJAME)
International Journal of Systems Science (Taylor & Francis)
International Journal of Sustainable Materials and Structural Systems (Inderscience)
Journal of Engineering Mechanics (ASCE)
Journal of Structural Engineering (ASCE)
Journal of Sound and Vibration (Elsevier)
Journal of Vibration and Control (SAGE)
12
Mechanical Systems and Signal Processing (Elsevier)
Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile
Engineering (SAGE)
Sensors (MDPI)
Soil Dynamics and Earthquake Engineering (Elsevier)
Structural Control and Health Monitoring (Wiley)
Tunnelling and Underground Space Technology (Elsevier)
Wind Energy (Wiley)
2.4. Journal Editorial Activities
Editorial Board member, Helyion, Elsevier.
2.5. Peer – review of research proposals
Reviewer of contributions submitted to Greek National Research Actions under the title
Development - support of new innovative businesses, particularly knowledge-intensive (Spin-off &
Spin-out).
2.6. Research projects1
OMISM, ETH Mobility Initiative Grant, On board Monitoring for Integrated Systems
Understanding & Management Improvement in Railways, in collaboration with Prof. Corman and
the Swiss Federal railways (SBB), ongoing.
FORESEE, H2020-MG-2016-2017 Grant, Future proofing strategies FOr RESilient transport
networks against Extreme Events, MG-7-1-2017 RIA, ongoing.
R’Equip, SNSF Grant, Smart Monitoring System for Inspection and Life-Cycle Assessment of
Critical Infrastructure, Project # 2-77242-17, ongoing.
INSPIRE, ITN Training Network, H2020-MSCA-ITN-2018, Innovative Ground Interface Concepts
for Structure Protection, ongoing.
DyVirt, ITN Training Network, MSCA-ITN-2017, Dynamic Virtualisation: modelling performance
of engineering structures, ongoing.
WINDMIL RT-DT, ERC Proof of Concept (PoC) Grant, ERC-2018-PoC, An autonomous Real-Time
Decision Tree framework for monitoring and diagnostics on wind turbines, ongoing.
1 An analytical catalog of all associated research and work contracts (2002-2013) is given in the Appendix.
13
WINDMIL – Smart Monitoring Inspection and Life-Cycle Assessment of Wind Turbines (Prof.
Chatzi’s ERC Starting Grant ERC-2015-StG #679843), ongoing.
Concrete Solutions, National research Programme NRP70 “Energy Turnaround”, Project
#407040_154060, Getting more out of Structures through monitoring and simulation, ongoing.
ETH HONR - House of Natural Resources: innovative Structure for Sustainable Buildings (ETH
Research Grant, Forschungsgesuch ETH-26 12-2).
Structural health monitoring of a wind tower facility in Lübbenau Germany, in collaboration
with Repower Wind Lübbenau GmbH.
Structural Identification for Condition Assessment of Swiss Bridges, Research Grant funded by
Bundesamt für Strassen - ASTRA (Federal Roads Office - FEDRO), Project # AGB 2012/015,
effective 30/11/2012-31/08/2014.
SERIES – Seismic Engineering Research Infrastructures for European Synergies (FP7-
INFRASTRUCTURES, #227887).
SAFECAST – Performance of Innovative Mechanical Connections in Precast Building Structures
under Seismic Conditions (FP7-SME, #218417).
2.7. Academic Events Organization
06.2019: WESC 2019 Conference: Minisymposium on Structural Health Monitoring: Applications
and Potential in Wind Energy.
06.2019: UNCECOMP 2019 Conference: Minisymposium on Uncertainty Quantification in
Vibration based Monitoring and Structural Dynamics Simulations.
06.2019: EMI 2019 Conference: Special Session on Mechanical metamaterials for waves
mitigation and control.
01.2019: IMAC 2019 Conference: Special Session on Recursive Bayesian Estimation for Real-Time
Monitoring and Maintenance.
05.2018: EMI 2018 Conference: Special Session on Metamaterials for vibration mitigation.
09.1027: 7AESE: 7th International Conference on Advances in Experimental Structural
Engineering: Special Session on Field Testing and Structural Health Monitoring.
09.2017: SMAR 2017 Conference: Special Session on Vibration-based Structural Health
Monitoring.
14
11.2016: Academia Industry Modeling (AIM) Week2: organization of the event and the following
thematic areas:
a. HILTI – Acoustic emission of a discoid excited by varying frictional contact (team
supervision)
b. HILTI - Setting adhesive anchors
c. IBM - Finding holes in materials
d. Meteomatics GmbH - Verzasca flash flood prediction
e. SIEMENS - Automatic Conversion of BIM/IFC Data for Thermal Energy Simulation (team
supervision)
f. General Electric - Troubleshooting for thermodynamic network calculations
g. JPMorgan Chase & Co - Low Latency solutions for High Frequency data in Automated
Trading Systems
11.2015: Academia Industry Modeling (AIM) Week: Team supervision for the following thematic
area:
a. Seitz Valves - An Energy Dissipation Model for Viscoelastic Material and a Fatigue
Simulation tool. A case study for POM-C.
2.8. Invited Presentations & Talks
[1] Dertimanis, V.K., Strukturidentifikation für die Zustandsbeurteilung von Brücken in der Schweiz,
ASTRA Unternehmertagung, Bern, Schweiz, 2018.
[2] Dertimanis, V.K., Open Research Topics in System Identification and Structural Health
Monitoring, Bergamo, Italy, 2018.
[3] Dertimanis, V.K. and Chatzi, E.N., On the engineering implications of seismic metamaterials:
technical requirements and practical challenges, 3rd Workshop on Seismic Metamaterials,
Bologna, Italy, 2017.
2 Computational Science Zürich, a joint ETH Zürich and University of Zürich PhD Program, organizes every year the Industry Academia Modelling Week, the responsibility for the organization of which is undertaken by a Chair.
15
3. Professional activities
3.1. Structural vibration analyst
Theoretical and experimental structural analysis and earthquake engineering in the Laboratory for
Earthquake Engineering, National Technical University of Athens.
Related actions / responsibilities:
Shaking table software and controller updating.
Design and analysis of multi-story prefabricated timber buildings.
Earthquake response of structures.
Structural vibration analysis (e.g. petroleum reactors, various types of specimens, etc.)
Implementation of modern structural identification methods.
3.2. Measurement engineer
Measurement engineer for the Vehicles Laboratory, National Technical University of Athens, for the
following quantities, according to ISO 17025:
Acceleration
Elongation
Strain
Stress
Torsional Torque
Related actions / responsibilities:
Design and realization of measurement chains (sensors, conditioners, DAQ units, cabling and
PC) for the measurement of each quantity, in mechanical (not only) structures.
Design and realization of measurement procedures (methods), in view of the requirements
for repeatability and reproducibility in the implemented experiments.
Assessment of all measurement uncertainties rising from corresponding equipment
certificates (Type B).
Development of an internal method for the calculation of the total measurement
uncertainty (Type A, Type B, combined uncertainty, total uncertainty).
Realization of testing apparatus for the periodic inspection of the equipment.
16
Compilation of measurement manuals.
Compilation of measurement reports according to ISO 8002.
Research on relevant Metrology legislations and scientific publications.
Attendance of relative seminar, organized by the Hellenic Institute of Metrology.
3.3. ADR Inspector
ADR Inspector for the type approval of fixed – tank vehicles carrying flammable liquids and vehicles
for the carriage of blasting explosives.
Related actions / responsibilities:
Inspection of vehicle documentation.
Inspection of compliance to the prescribed design type.
Inspection and measurement of tank shell thickness (where applicable).
Inspection of the equipment.
Hydraulic pressure tests (where applicable).
3.4. Speaker in seminars 3
3.4.1. ADR Inspectors
Speaker in training seminar of ADR inspectors organized by the Greek Ministry of Transport
and Communication.
3.4.2. Dangerous Goods Safety Advisors
Originator in up to 23 training seminars of Dangerous Goods Safety Advisors, organized by
the Vehicles Laboratory and the Dynamics & Constructions Laboratory, National Technical
University of Athens.
Originator in training seminar of Dangerous Goods Safety Advisors, organized by the
Vehicles Laboratory, National Technical University of Athens, for the Greek Railways.
Originator in up to 3 training seminars of Dangerous Goods Safety Advisors, organized by the
Chemical Process Engineering Laboratory, University of Thessaloniki.
Originator in training seminar of Dangerous Goods Safety Advisors, organized by the Cyprus
Certification Company (in Cyprus).
3 The total duration of teaching in all the aforementioned seminars exceeds 2000 hours.
17
3.4.3. ADR Drivers
Originator (exclusive) in up to 10 training seminars of ADR drivers, organized by the Cyprus
Certification Company (in Cyprus).
3.5. Design, analysis and construction of metallic tanks and fixed-tank vehicles
3.5.1. Type approval of metallic tanks
Signatory engineer of up to 50 corresponding tank design Type Approvals, issued by the domestic
Ministry of Transport and Communication, according to ADR related standards (as for example EN
13094:2008).
Related actions / responsibilities:
Selection of appropriate tank materials (steel, aluminum alloys) and traceability of their
mechanical properties.
Tank design for the carriage of flammable liquids: geometry selection, optimum positioning of
tank supports with respect to several vehicle frames, optimum design of partitions.
Stress analysis under prescribed loading conditions.
Monitoring and inspection of construction.
3.5.2. Type approvals of fixed-tank vehicles
Design, construction supervision and assembly of fixed – tank vehicles for the carriage of flammable
liquids, for several domestic industries. Over 800 assemblies of fixed – tanks into vehicles of
categories N and O (two/three axle trucks, two axle trailers and three axle semi – trailers).
Related actions / responsibilities:
Design of appropriate supporting systems for the installation of tanks into various vehicle types.
Calculation of bolts and welds.
Monitoring and inspection of the construction and assembly process.
Ready fixed – tank vehicle testing performance prior to registration.
18
4. List of publications
4.1. Books
[1] Dertimanis, V.K. and Chatzi, E.N., Structural System Identification and Health Monitoring: a
Primer, CRC Press, in preparation.
4.2. Book chapters
[1] Dertimanis, V.K., Mouzakis, H.P. and Psycharis, I.N., On the control of shaking tables in
acceleration mode: An adaptive signal processing framework, in F. Taucer, R. Apostolska
(Eds.), Experimental Research in Earthquake Engineering, Ch. 12, 159-172, Geotechnical
Geological and Earthquake Engineering series Vol. 35, Springer International Publishing,
Heidelberg, 2015.
[2] Dertimanis, V.K. and Koulocheris, D.V., VAR based state-space structures: realization,
statistics and spectral analysis, in C. Andrade, J. Filipe and J.-L. Ferrier (Eds.), Lecture Notes in
Electrical Engineering, 85, 301-315, Springer, Berlin, 2011.
[3] Koulocheris, D.V. and Dertimanis, V.K., Evolutionary parametric identification of dynamic
systems, in Hithoshi Iba (Ed.), Frontiers in Evolutionary Robotics, Ch. 15, 275-290, I-Tech
Education and Publishing, Vienna, 2008.
4.3. Journals
[1] Martin-Sanz, H., Tatsis, K., Dertimanis, V.K., Avendaño Valencia, L.D., Bruehwiler, E., and
Chatzi, E., Environmental and operational variability influence on monitoring UHPFRC
strengthened viaduct, submitted to Structure and Infrastructure Engineering.
[2] Zaccherini, R., Palermo, A., Krödel, S., Dertimanis, V.K., Marzani, A., Daraio, C., and Chatzi,
E.N., Attenuation of Guided Surface Acoustic Modes in Granular Media via Resonant
Metasurfaces, submitted to the New Journal of Physics.
[3] Dertimanis, V.K., Chatzi, E.N., Eftekhar Azam, S. and Papadimitriou, C., Input–state–parameter
estimation of structural systems from limited output information, submitted to Mechanical
Systems and Signal Processing.
[4] Giagopoulos, D., Arailopoulos, A., Dertimanis, V.K., Papadimitriou, C., Chatzi, E. and
Grompanopoulos, K., Structural health monitoring and fatigue damage estimation using
vibration measurements and finite element model updating, Structural Health Monitoring, #
1475921718790188, 2018.
19
[5] Palermo, A., Krödel, S., Matlack, K.H., Zaccherini, R., Dertimanis, V.K., Chatzi, E.N., Marzani, A.,
and Daraio, C., Hybridization of Guided Surface Acoustic Modes in unconsolidated granular
media by a resonant metasurface, Physical Review Applied, 9(5), # 054026, 2018.
[6] Wagner, P.-R., Dertimanis, V.K., Chatzi, E.N. and Beck, J.L., Robust-to-Uncertainties Optimal
Reliability Design of Seismic Metastructures, Journal of Engineering Mechanics, 144(3), #
04017181,2018.
[7] Leyder, C., Dertimanis, V.K., Frangi, A., Chatzi, E. and Lombaert, G., Optimal sensor placement
methods and metrics - Comparison and implementation on a timber frame structure,
Structure and Infrastructure Engineering, 14(7), 997 – 1010, 2018.
[8] Shokrani, Y., Dertimanis, V.K., Chatzi, E.N. and Savoia, M., On the use of Mode Shape
Curvatures for Damage Localization under Varying Environmental Conditions, Structural
Control and Health Monitoring, 25(4), e2132, 2018.
[9] Dertimanis, V.K., Spriridonakos, M.D. and Chatzi, E.N., Data-driven uncertainty quantification
of structural systems via B-spline expansion, Computers and Structures, 207, 245-257, 2018.
[10] Ou, Y., Chatzi, E.N., Dertimanis, V.K. and Spiridonakos, M.D., Vibration-based experimental
damage detection of a small-scale wind turbine blade, Structural Health Monitoring, 16(1), 79-
96, 2017.
[11] Miah, M.S., Chatzi, E.N., Dertimanis, V.K. and Weber, F., Real-time experimental Validation of
a novel Semi-active Control Scheme for Vibration Mitigation, Structural Control and Health
Monitoring, 24(3), e1878, 2017.
[12] Wagner P.R., Dertimanis, V.K., Antoniadis, I.A., and Chatzi, E.N., On the feasibility of structural
metamaterials for seismic-induced vibration mitigation, International Journal of Earthquake
and Impact Engineering, 1(1/2), 20-56, 2016.
[13] Dertimanis, V.K., Antoniadis, I.A., and Chatzi, E.N., Feasibility analysis on the attenuation of
strong ground motions using finite periodic lattices of mass-in-mass barriers, Journal of
Engineering Mechanics, 142(9), 04016060, 2016.
[14] Miah, M.S., Chatzi, E.N., Dertimanis, V.K. and Weber, F., Nonlinear Modeling of a Rotational
MR Damper via an Enhanced Bouc-Wen Model, Smart Materials and Structures, 24(10),
105020, 2015.
[15] Dertimanis, V.K., Mouzakis, H.P. and Psycharis, I.N., On the acceleration–based adaptive
inverse control of shaking tables, Earthquake Engineering & Structural Dynamics, 44(9), 1329-
1350, 2015.
20
[16] Dertimanis, V.K., Chatzi, E.N., and Spiridonakos, M.D., Hybrid evolutionary identification of
output-error state-space models, Structural Monitoring and Maintenance, 1(4), 427-449,
2014.
[17] Dertimanis, V.K., Output-error state-space identification of vibrating structures using
evolution strategies: a benchmark study, Smart Materials and Systems, 14(1), 17-37, 2014.
[18] Dertimanis, V.K., On the use of dispersion analysis for model assessment in structural
identification, Journal of Vibration and Control, 19 (15), 2270-2284, 2013.
[19] Koulocheris, D.V., Dertimanis, V.K. and Spentzas, C.N., Parametric identification of vehicle
structural characteristics, Forschung im Ingenieurwesen, 72 (1), 39-51, 2008.
[20] Koulocheris, D.V., Dertimanis, V.K. and Spentzas, C.N., Analysis and optimization of a fixed-
tank vehicle, Forschung im Ingenieurwesen, 70 (3), 171-178, 2006.
[21] Koulocheris, D.V. and Dertimanis, V.K., A hybrid algorithm for the PEM estimation of ARMAX
structures, Foundations of Computing and Decision Sciences, 30 (4), 309-330, 2005.
[22] Koulocheris, D.V., Vrazopoulos, H. and Dertimanis, V.K., Parametric time domain identification
of a flexible robotic arm using evolutionary algorithms, WSEAS Trans. On Systems, 3 (1), 84-89,
2004.
[23] Koulocheris, D.V., Dertimanis, V.K. and Vrazopoulos, H., A Hybrid Evolution Strategy for
vehicle suspension optimization, WSEAS Trans. On Systems, 3 (1), 90-95, 2004.
[24] Koulocheris, D.V., Dertimanis, V.K. and Vrazopoulos, H., Evolutionary parametric identification
of dynamic systems, Forschung im Ingenieurwesen, 68 (4), 173-181, 2004.
[25] Koulocheris, D.V., Vrazopoulos, H. and Dertimanis, V.K., Design of an I-Beam using a
deterministic Multiobjective optimization algorithm, WSEAS Trans. On Circuits and Systems, 2
(4), 794-799, 2003.
[26] Koulocheris, D.V., Vrazopoulos, H. and Dertimanis, V.K., ARMAX parameter estimation using
hybrid optimization techniques, WSEAS Trans. On Circuits and Systems, 2 (4), 788-793, 2003.
4.4. International Conferences
[1] Zaccherini, R., Palermo, A., Krödel, S., Dertimanis, V.K., Marzani, A., Daraio, C., and Chatzi,
E.N., Resonant metabarriers as seismic attenuators in granular media, in Proceedings of the
28th ISMA conference on Noise and Vibration Engineering (ISMA 2018), Leuven, Belgium,
September 17-19, 2018. (Talk by R. Zaccherini).
21
[2] Tatsis, K., Dertimanis, V., and Chatzi, E., On damage localization in wind turbine blades: a
critical comparison and assessment of modal-based criteria, in Proceedings of the 7th World
Conference on Structural Control and Monitoring, 7WCSCM, Qingdao, China, July 22-25, 2018
(Talk by E. Chatzi).
[3] Tatsis, K., Dertimanis, V., and Chatzi, E., Modal-based damage localization on wind turbine
blades under environmental variability, 9th European Workshop On Structural Health
Monitoring (EWSHM 2018), Manchester, UK, July 10-13, 2018 (Talk by E. Chatzi).
[4] Dertimanis, V., and Chatzi, E., LQR-UKF Active Comfort Control of Passenger Vehicles with
Uncertain Dynamics, in Proceedings of the 18th IFAC Symposium on System Identification,
Stockholm, Sweden, July 9-11, 2018.
[5] Martín-Sanz, H., Dertimanis, V., Avendaño-Valencia, L.D., Chatzi, E., and Brühwiler, E.,
Monitoring of the Chillon viaduct after strengthening with UHPFRC, 9th International
Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), Melbourne,
Australia, 9-13 July 2018 (Talk by H. Martin-Sanz).
[6] Abdallah, I., Dertimanis, V., Mylonas, Ch., Tatsis, K., Chatzi, E., Dervilis, N., Worden, K. and
Maguire, E., Fault diagnosis of wind turbine structures using decision tree learning algorithms
with big data, ESREL 2018, Trondheim, Norway, 2018 (Talk by I. Abdallah).
[7] Abdallah, I., Dertimanis, V. and Chatzi, E., An autonomous real-time decision tree framework
for monitoring & diagnostics on wind turbines, WINERCOST 18, Catanzaro, Italy, 21–23 March
2018 (Talk by I. Abdallah).
[8] Papadimitriou, C., Chatzi, E.N., Eftekhar Azam, S. and Dertimanis, V.K., Fatigue Monitoring and
Remaining Lifetime Prognosis Using Operational Vibration Measurements, IMAC-XXXVI,
Orlando, Florida, 12–15 February, 2018 (Talk by C. Papadimitriou).
[9] Chatzi, E.N. and Dertimanis, V.K., On the Monitoring-Driven Assessment of Engineered
Systems, IMAC-XXXVI, Orlando, Florida, 12–15 February, 2018 (Talk by E. Chatzi).
[10] Gkoktsi, K., Giaralis, A., Klis, R. Dertimanis, V., and Chatzi, E., Vibration-based structural
performance assessment via output only sub-Nyquist/ compressive wireless sensor data, 4th
International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil
Structures, SMAR 2017, September 13-15 2017, Zurich, Switzerland.
[11] Giagopoulos, D., Arailopoulos, A., Dertimanis, V., Papadimitriou, C., Chatzi, E. and
Grompanopoulos, K., Computational Framework for Online Estimation of Fatigue Damage
using Vibration Measurements from a Limited Number of Sensors, X International Conference
on Structural Dynamics, EURODYN 2017, September 10-13 2017, Rome, Italy. (Talk by D.
Giagopoulos)
22
[12] Tatsis, K., Dertimanis, V., Abdallah, I. and Chatzi, E., A substructure approach for fatigue
assessment on wind turbine support structures using output-only measurements, X
International Conference on Structural Dynamics, EURODYN 2017, September 10-13 2017,
Rome, Italy. (Talk by E. Chatzi)
[13] Ou, Y. Harmanci, Y.E., Chen, Q. De Soto, B.G., Dertimanis, V. and Chatzi, E., A finite element
analysis approach to improve interoperability for thermal energy simulations, 9th International
Structural Engineering and Construction Conference, ISEC-9, July 24-29 2017, Valencia, Spain.
[14] Ou, Y., Dertimanis, V.K. and Chatzi, E., Operational damage localization of wind turbine
blades, EVACES 2017, July 12-14 2017, San Diego, USA.
[15] Abdallah, I., Dertimanis, V. and Chatzi, E., Data-driven identification, classification and update
of decision tress for monitoring and diagnostics of wind turbines, 2nd ECCOMAS Thematic
Conference on Uncertainty Quantification in Computational Sciences and Engineering,
UNCECOMP 2017, Rhodes Island, Greece, 15–17 June 2017.
[16] Tsotalou, M., Giagopoulos, D., Dertimanis, V. and Chatzi, E., Model updating of a nonlinear
experimental vehicle using substructuring and unscented Kalman filtering, 2nd ECCOMAS
Thematic Conference on Uncertainty Quantification in Computational Sciences and
Engineering, UNCECOMP 2017, Rhodes Island, Greece, 15–17 June 2017 (Talk by D.
Giagopoulos).
[17] Abbiati, G., Whyte, C.A., Dertimanis, V.K. and Stojadinovic, B., Hybrid simulation of large-scale
structures at ETH Zürich: the new 8-actuator multi-axial subassemblage testing (MAST) setup,
in Proceedings of the 16th World Conference on Earthquake Engineering, Santiago, Chile, 2017
(Talk by G. Abbiati).
[18] Dertimanis, V.K., Eftekhar Azam, S., Chatzi, E. and Papadimitriou, C., Output-only fatigue
prediction of uncertain steel structures, 8th European Workshop On Structural Health
Monitoring (EWSHM 2016), Bilbao, Spain, 2016.
[19] Ou, Y., Dertimanis, V.K. and Chatzi, E., Wind Turbine Blade Damage Detection and Localization
via Spatiotemporal Kalman Filtering, in Proceedings of the 5th International Symposium on
Life-Cycle Civil Engineering (IALCCE 2016), Delft, The Netherlands, 2016. (Talk by Y. Ou)
[20] Klis, R., Chatzi, E. and Dertimanis, V., Experimental Validation of Spectro-Temporal
Compressive Sensing for Vibration Monitoring using Wireless Sensor Networks, in Proceedings
of the 5th International Symposium on Life-Cycle Civil Engineering (IALCCE 2016), Delft, The
Netherlands, 2016. (Talk by R. Klis)
23
[21] Ou, Y., Dertimanis, V.K. and Chatzi, E., Experimental damage detection of a wind turbine
blade under varying operational conditions, in Proceedings of the 5th International Conference
on Uncertainty in Structural Dynamics (USD2016), Leuven, Belgium, 2016. (Talk by Y. Ou)
[22] Dertimanis, V., Chatzi, E. and Weber, F., LQR-UKF semi-active control of (partially) uncertain
structures, 6th EACS European Conference, Sheffield, UK, 2016.
[23] Dertimanis, V., Giagopoulos, D. and Chatzi, E., Finite Element Metamodeling of Uncertain
Structures, European Congress on Computational Methods in Applied Sciences and
Engineering, Crete, Greece, 2016.
[24] Shokrani, Y., Dertimanis, V.K., Chatzi, E.N., and Savoia, M., Structural Damage Localization
Under Varying Environmental Conditions, in Proceedings of 11th HSTAM International
Congress on Mechanics, Athens, Greece, 2016.
[25] Dertimanis, V.K., Chatzi, E.N., Eftekhar Azam, S. and Papadimitriou, C., Fatigue assessment in
steel railway bridges using output only vibration measurements and partial structural
information, 3rd International Conference on Railway Technology: Research, Development and
Maintenance, Cagliari, Italy, 2016.
[26] Giagopoulos, D., Dertimanis, V., Chatzi, E. and Spiridonakos, M., Online state and parameter
estimation of a nonlinear gear transmission system, IMAC-XXXIV, Orlando, United States,
2016. (Talk by D. Giagopoulos)
[27] Wagner, P.R., Dertimanis, V., Chatzi, E. and Antoniadis, I., Design of metamaterials for seismic
isolation, IMAC-XXXIV, Orlando, United States, 2016. (Talk by G. P.R. Wagner)
[28] Ou, Y., Grauvogl, B., Spiridonakos, M., Dertimanis, V., Chatzi, E. and Vidal, J., Vibration-based
Damage Detection on a Blade of a Small Scale Wind Turbine, International Workshop on
Structural Health Monitoring, Stanford, USA, 2015. (Talk by M. Spiridonakos)
[29] Spiridonakos, M.D., Dertimanis, V.K. and Chatzi, E.N., Estimation of Data-Driven Polynomial
Chaos using hybrid Evolution Strategies, 4th International Conference on Soft Computing
Technology in Civil, Structural and Environmental Engineering, Prague, Czech Republic, 2015.
[30] Leyder, C., Dertimanis, V., Chatzi, E, and Frangi, A., Optimal Sensor Placement for the Modal
Identification of an Innovative Timber Structure, in Proceedings of UNCECOMP, Crete, Greece,
2015. (Talk by C. Leyder)
[31] Eftekhar-Azam, S., Dertimanis, V., Chatzi, E., and Papadimitriou, C., Output only schemes for
input-state-parameter estimation of linear systems, in Proceedings of UNCECOMP, Crete,
Greece, 2015. (Talk by E. Chatzi)
24
[32] Dertimanis, V.K., Spiridonakos, M.D. and Chatzi, E.N., Dispersion-corrected, Operationally
Normalized Stabilization Diagrams for Robust Structural Identification, IMAC-XXXIII, Orlando,
USA, 2015.
[33] Lalas, A., Dertimanis, V.K., Antoniadis, I.A. and Chatzi, E.N., Considerations towards the
application of low-frequency locally resonant metamaterials for earthquake hazard mitigation,
in Proceedings of Engineering Mechanics Institute (ASCE) International Conference, Hong
Kong, 2015.
[34] Dertimanis, V.K. and Chatzi, E.N., Dispersion Corrected Stabilization Diagrams for model order
assessment in Structural Identification, in Proceedings of the 7th Workshop on Structural
Health Monitoring, Nantes, France, 2159-2166, 2014.
[35] Dertimanis, V.K. and Chatzi, E.N., A hybrid evolution strategy approach to the structural
identification problem via state-space models, in Proceedings of the 6th World Conference on
Structural Control and Monitoring, Barcelona, Spain, 2468-2477, 2014.
[36] Dertimanis, V.K., Mouzakis, H.P. and Psycharis, I.N., Real-Time Shaking Table Adaptive
Modeling under Acceleration Control: Effects of Training Signals and Specimen Dynamics, in
Proceedings of the 6th World Conference on Structural Control and Monitoring, Barcelona,
Spain, 996-1008, 2014.
[37] Koulocheris, D.V. and Dertimanis, V.K., Calculation of a Fixed–Tank Vehicle Optimum Dynamic
Performance, in Proceedings of Transport Research Arena 2012, Procedia - Social and
Behavioral Sciences, 48 (1), 2230-2240, 2012.
[38] Dertimanis, V., Koulocheris, D., Spitas, V. and Spitas, Ch., State-Space Realizations of
Multivariate Time-Series with Application to the Subspace Estimation of Vehicle Dynamics, 5th
IC–SCCE, Athens, Greece, 2012.
[39] Koulocheris, D., Dertimanis, V., Spitas, V. and Spitas, Ch., Heavy Vehicle Roll-Plane Modeling
and Optimization of Transmissibility Ratios, 5th IC–SCCE, Athens, Greece, 2012.
[40] Koulocheris, D., Stathis, A., Costopoulos, Th. and Dertimanis, V., Residual Useful Life
Estimation for Rolling Element Bearings based on Vibration Signal Analysis, 5th IC–SCCE,
Athens, Greece, 2012.
[41] Spitas V., Spitas, Ch., Koulocheris, D. and Dertimanis, V., Improving the Crashworthiness of
Vehicle Bumpers by Using Low-Cost Mineral Matrix Glass-Fibre Composites, 5th IC–SCCE,
Athens, Greece, 2012.
[42] Spitas V., Spitas, Ch., Koulocheris, D. and Dertimanis, V., Accelerated Testing of PZT Patches
for Active Vibration Attenuation in Vehicle Oil Pans, 5th IC–SCCE, Athens, Greece, 2012.
25
[43] Dertimanis, V. and Koulocheris, D., On the state–space realization of vector autoregressive
structures: an assessment, 6th ICINCO Conference, Milan, Italy, 2009.
[44] Koulocheris, D. and Dertimanis, V., Design of a novel hybrid optimization algorithm, 6th ICINCO
Conference, Milan, Italy, 2009.
[45] Dertimanis, V. and Koulocheris, D., Identification of vehicle suspensions’ faults from
multichannel excitation and vibration response measurements, 3rd IC–SCCE, Athens, Greece,
2008.
[46] Koulocheris, D. and Dertimanis, V., Design methodology and calculation of tank supports in a
heavy vehicle, 3rd IC–SCCE, Athens, Greece, 2008.
[47] Koulocheris, D., Dertimanis, V. and Spentzas, C., On the estimation of optimum structural
parameters for a triaxial fixed–tank vehicle, 2007 JUMV International Automotive Conference,
Belgrade, Serbia, 2007.
[48] Koulocheris, D., Dertimanis, V. and Spentzas, C., Estimation of vehicle’s structural parameters
from multi–channel vibration measurements, 2007 JUMV International Automotive
Conference, Belgrade, Serbia, 2007.
[49] Dertimanis, V. and Koulocheris, D., Vehicle’s suspension fault identification via modal
parameters update, 2007 JUMV International Automotive Conference, Belgrade, Serbia, 2007.
[50] Koulocheris, D., Dertimanis, V. and Spentzas, C., On the estimation of vehicle’s dynamics from
vibration response data, 2006 International Congress Motor Vehicles and Motors, Kragujevac,
Serbia, 2006.
[51] Koulocheris, D., Dertimanis, V., Spentzas, C. and Dourambeis, N., Optimisation of fixed-tank
vehicle’s dynamics, 2006 International Congress Motor Vehicles and Motors, Kragujevac,
Serbia, 2006.
[52] Koulocheris, D. and Dertimanis, V., A two-model approach for the improvement of a fixed
tank vehicle’s vertical and lateral dynamics, in Proceedings of the 8th Biennial ASME
Engineering Systems Design And Analysis, Torino, Italy, 2006.
[53] Koulocheris, D. and Dertimanis, V., Parametric identification of vehicle’s vertical dynamics
using vector autoregressive moving average models, in Proceedings of the 8th Biennial ASME
Engineering Systems Design And Analysis, Torino, Italy, 2006.
[54] Dertimanis, V., Koulocheris, D. and Spentzas, C., Assessment of a robust algorithm for the
detection and diagnosis of additive faults, in Proceedings of the 8th Biennial ASME Engineering
Systems Design And Analysis, Torino, Italy, 2006.
26
[55] Koulocheris, D., Dertimanis, V. and Spentzas, C., Structural optimization of a fixed-tank vehicle
using Complex method, 5th GRACM International Congress on Computational Mechanics,
Limassol, Cyprus, 2005.
[56] Dertimanis, V., Koulocheris, D. and Spentzas, C., Design of a hybrid algorithm for ARMA
parameter estimation, 5th GRACM International Congress on Computational Mechanics,
Limassol, Cyprus, 2005.
[57] Koulocheris, D., Dertimanis, V. and Spentzas, C., Design and optimization of a fixed tank
vehicle, 2005 EAEC European Automotive Congress, Beograd, Serbia and Montenegro, 2005.
[58] Koulocheris, D., Dertimanis, V. and Spentzas, C., Vehicle System Identification Using MIMO-
ARMAX Models, 2005 EAEC European Automotive Congress, Beograd, Serbia and
Montenegro, 2005.
[59] Koulocheris, D., Dertimanis, V. and Spentzas, C., Optimum positioning of tank mountings in a
fixed tank vehicle, 7th Biennial ASME Engineering Systems Design And Analysis, Manchester,
United Kingdom, 2004.
[60] Koulocheris, D., Dertimanis, V. and Spentzas, C., A novel optimization algorithm for the
estimation of ARMAX models, 7th Biennial ASME Engineering Systems Design And Analysis,
Manchester, United Kingdom, 2004.
[61] Koulocheris, D., Vrazopoulos, H. and Dertimanis, V., Hybrid Evolution Strategy for the design
of welded beams, in Proceedings of EUROGEN 2003, Barcelona, Spain, 2003. (Talk by H.
Vrazopoulos)
[62] Koulocheris, D., Vrazopoulos, H. and Dertimanis, V., Vehicle Suspension system identification
using Evolutionary Algorithms, in Proceedings of EUROGEN 2003, Barcelona, Spain, 2003.
[63] Dertimanis, V., Koulocheris, D., Vrazopoulos, H. and Kanarachos, A., Time–series parametric
modelling using Evolution Strategy with deterministic mutation operators, IFAC International
Conference on Intelligent Control Systems and Signal Processing, ICONS, Faro, Portugal, 2003.
[64] Koulocheris, D., Vrazopoulos, H. and Dertimanis, V., Optimization Algorithms for tuning
suspension systems used in ground vehicles, in Proceedings of ATT2002, Paris, France, 2002.
(Talk by H. Vrazopoulos)
[65] Kanarachos, A., Koulocheris, D., Dertimanis, V. and Vrazopoulos, H., Identification of a robotic
arm using optimization methods for model estimation, in Proceedings of IBEC2002, Paris,
France, 2002.
[66] Koulocheris, D., Vrazopoulos, H. and Dertimanis, V., Optimization Methodology for tuning
Fuzzy Logic Controllers, IFAC 2002, Barcelona, Spain, 2002. (Talk by H. Vrazopoulos).
27
4.5. Conferences (poster/presentation only)
[1] Zimmermann, M., Dertimanis, V., Chatzi, E., and Corman, F., Estimating track condition based on
axle box accelerations of revenue trains, 4th International Conference on Railway Technology:
Research, Development and Maintenance (RAILWAYS 2018), Barcelona, Spain, 2018.
[2] Palermo, A., Krödel, S., Matlack, K., Zaccherini, R., Dertimanis, V., Chatzi, E., Marzani, A., and
Daraio, C., Large scale metasurfaces for seismic waves control, The Journal of the Acoustical
Society of America, 143(3), p. 1713, 175th Meeting of the Acoustical Society of America,
Minneapolis, MN, USA, 2018.
[3] Wagner, P., Dertimanis, V., Chatzi, E., and Beck, J., Optimal design of seismic lattices in the
presence of uncertainties, EMI 2018 - Engineering Mechanics Institute Conference, Cambridge,
MA, USA, 2018.
[4] Zaccherini, R., Palermo, A., Dertimanis, V., Marzani, A., Daraio, C., and Chatzi, E., Surface Wave
Attenuation via Resonant Metabarriers in Granular Substrates, EMI 2018 - Engineering
Mechanics Institute Conference, Cambridge, MA, USA, 2018.
[5] Mylonas, C., Abdallah, I., Dertimanis, V., and Chatzi, E., Strain-based Damage Localization
Through Statistical Feature Extraction, EMI 2018 - Engineering Mechanics Institute Conference,
Cambridge, MA, USA, 2018.
[6] Zaccherini, R., Palermo, A., Dertimanis, V., Marzani, A., Daraio, C., and Chatzi, E., Attenuation of
Rayleigh-like waves in Granular Media via Resonant Metabarriers, European Geosciences Union
General Assembly 2018, EGU18, Vienna, Austria, 2018.
[7] Chatzi, E.N. and Dertimanis, V.K., Seismic Metamaterials: Technical Requirements and Practical
Challenges, 24eme Congrès Général de la Société Française de Physique, Paris, France, 2017.
[8] Papadimitriou, C., Chatzi, E., Eftekhar Azam, S. and Dertimanis, V., Fatigue monitoring and
remaining lifetime prognosis in steel structures using output-only vibration measurements, EMI
2017 - Engineering Mechanics Institute Conference, San Diego, CA, USA, 2017.
[9] Giagopoulos, D., Dertimanis, V., and Chatzi, E., Nonlinear Analysis of Gear Transmission Systems
using Substructuring and Joint State & Parameter Estimation, EMI 2016 - Engineering Mechanics
Institute Conference, Metz, France, 2016.
[10] Ou, Y., Dertimanis, V.K. and Chatzi, E., Vibration-Based Health Monitoring of Wind Turbine
Blades, EMI 2016 - Engineering Mechanics Institute Conference, Nashville, USA, 2016.
[11] Spiridonakos, M., Giagopoulos, D., Chatzi, E., and Dertimanis, V., Finite Element Metamodeling
for Nonlinear Systems with Uncertain Properties, EMI 2015 - Engineering Mechanics Institute
Conference, Stanford, USA, 2015.
28
APPENDIX: CATALOG OF ACADEMIC & RESEARCH PROJECTS (2002 - 2013)
Α/Α DURATION TITLE
01 01.01.2013 – 28.02.2013 EXPERIMENTAL EARTHQUAKE ENGINEERING OF STRUCTURES –
DATA ANALYSIS AND REPORT
02 02.01.2013 – 28.02.2013 SERIES PROGRAME – PARTICIPATION IN ANALYSIS FOR
DELIVERABLE D14-4
03 02.07.2012 – 20.11.2012 INTEGRATED SYSTEM FOR THE OPTIMUM MANAGEMENT AND
CONTROL OF GREEN ENERGY PRODUCTION FROM WASTES
04 21.06.2012 – 20.10.2012 THEORETICAL AND NUMERICAL INVESTIGATION OF TIMBER
PREFABRICATED TECHOLOGY EXTENSION TO MULTI-STORY
BUILDINGS
05 07.03.2012 – 25.05.2012 TRAINING OF ENGINEERS FOR THE CARRIAGE OF DANGEROUS
GOODS BY ROAD/RAIL
06 01.03.2012 – 31.07.2012 SHAKING TABLE SOFTWARE AND CONTROLLER UPDATING
07 19.02.2012 – 20.03.2012 SCIENTIFIC AND TECHNICAL SUPPORT FOR THE STRUCTURAL
TESTING OF ABB SPECIMENS
08 02.01.2012 – 30.06.2012 INTEGRATED SYSTEM FOR THE OPTIMUM MANAGEMENT AND
CONTROL OF GREEN ENERGY PRODUCITON FROM WASTES
09 01.01.2012 – 02.10.2012 TRAINING OF ENGINEERS FOR THE CARRIAGE OF DANGEROUS
GOODS BY ROAD/RAIL
10 01.12.2011 – 29.02.2012 SHAKING TABLE FAST HYBRID TESTING IN THE LABORATORY FOR
EARTHQUAKE ENGINEERING
11 11.07.2011 – 31.10.2011 TRAINING OF ENGINEERS FOR THE CARRIAGE OF DANGEROUS
GOODS BY ROAD/RAIL
12 07.09.2011 – 06.12.2011 PARTICIPATION IN “SYNERGY” ACTION (ΕΕ-04 & ΕΕ-05)
13 01.04.2011 – 30.04.2011 SEMINARS IN DYNAMIC ANALYSIS OF STRUCTURES
29
14 03.01.2011 – 29.04.2011 TRAINING OF ENGINEERS IN VEHICLES TECHNOLOGY
15 26.01.2011 – 25.09.2011 DESIGN AND DEVELOPMENT OF AN INTEGRATED MONITORING &
MEAINTENANCE SYSTEM IN A MECHANICAL RECYCLING WASTES
FACTORY
16 01.11.2010 – 31.12.2010 SERIES PROGRAME-PARTICIPATION IN WP12/JRA1
17 03.09.2010 – 15.12.2010 CALCULATION AND CAD OF A TANK FOR THE CARRIAGE OF LIQUID
BITUMEN
18 03.05.2010 – 30.11.2010 SAFECAST PROGRAME-PARTICIPATION IN WP12/JRA1 (VIBRATION
ANALYSIS)
19 01.05.2010 – 30.07.2010 TEACHING WORK
20 31.10.2009 – 30.04.2010 TEACHING WORK
21 02.04.2009 – 31.08.2009 TEACHING WORK
22 02.03.2009 – 31.07.2009 DEVELOPMENT OF COMPUTATIONAL CODE
23 12.01.2009 – 06.03.2009 TEACHING IN TRAINING SEMINAR FOR ENGINEERS
24 15.09.2008 – 15.03.2009 DEVELOPMENT OF COMPUTATIONAL CODE
25 10.09.2008 – 28.11.2008 TEACHING IN TRAINING SEMINAR FOR ENGINEERS
26 01.07.2008 – 10.09.2008 TEACHING WORK
27 01.04.2008 – 15.05.2008 TEACHING IN TRAINING SEMINAR FOR ENGINEERS
28 11.02.2008 – 11.04.2008 TEACHING WORK
29 28.11.2007 – 31.03.2008 HARMONIZATION OF DIRECTIVE 2006/90/EU (RID 2007)
30 15.10.2007 – 31.12.2007 TEACHING IN TRAINING SEMINAR FOR ENGINEERS
31 01.11.2006 – 31.12.2006 PROCESSING OF SHAKING TABLE DATA
32 01.09.2006 – 30.11.2006 PROCESSING AND SUPERVISION OF SPECIMENS
30
33 01.09.2006 – 31.12.2006 CALCULATION OF VEHICLES’ SUPERSTRUCTURES
34 01.09.2006 – 31.12.2006 TEACHING IN TRAINING SEMINAR FOR ENGINEERS
35 01.07.2006 – 31.10.2006 DEVELOPMENT OF COMPUTATIONAL CODE
36 01.04.2006 – 30.04.2006 INVESTIGATION OF THE MECHANICAL BEHAVIOUR OF MASONRY
WALL - MECHANICAL SUPPORT
37 10.01.2006 – 10.03.2006 TEACHING IN TRAINING SEMINAR FOR ENGINEERS
38 01.01.2006 – 30.04.2006 DEVELOPMENT OF COMPUTATIONAL CODE
39 02.12.2005 – 31.03.2006 PROGRAMMING OF ALGORITHMS
40 01.12.2005 – 31.03.2006 DEVELOPMENT OF COMPUTATIONAL CODE
41 04.05.2005 – 30.06.2005 DEVELOPMENT OF COMPUTATIONAL CODE FOR METALLIC TANKS
42 14.02.2005 – 27.05.2005 TEACHING ASSISTANCE IN “MECHANISMS AND INTRODUCTION TO
MACHINE DESIGN”
43 10.01.2005 – 30.06.2005 DEVELOPMENT OF COMPUTATIONAL CODE FOR THE SIMULATION
OF FIXED-TANK VEHICLES
44 01.01.2005 – 31.03.2005 TEACHING IN TRAINING SEMINAR FOR ENGINEERS
45 01.11.2004 – 31.12.2004 TECHNICAL REPORT
46 01.10.2004 – 05.11.2004 TEACHING WORK
47 15.09.2004 – 31.03.2005 DEVELOPMENT OF COMPUTATIONAL CODE FOR METALLIC TANKS
48 01.07.2004 – 31.08.2004 CAD DEVELOPMENT
49 01.04.2004 – 31.08.2004 CAD IN ACCORDANCE TO ADR
50 01.10.2004 – 30.06.2004
DESIGN AND ANALYSIS OF A METALLIC TANK FOR THE CARRIAGE
OF DANGEROUS GOODS IN ACCORDANCE TO ADR