deutz corporation training center - deutz home page t/c/d4.1, 6.1, 7.8 tier4 i/f topics: overview,...
TRANSCRIPT
Introduction:
DEUTZ Corporation provides comprehensive technician service training on all current engine
and system related technology. All courses are conducted according to a predetermined
curriculum and schedule. Textbooks and manuals are provided to supplement lectures by job
experienced instructors. Lectures on theory and operation are conducted in the classroom for
easy reference and better retention. DEUTZ authorized service training courses use PowerPoint
presentations, cutaway parts, exploded drawings and films to explain clearly the theory of
operation and to provide every technician a firm working knowledge of DEUTZ engine working
principles.
Hands-on work experience is incorporated into all courses to provide the technician with
maximum in depth training. This includes relevant service procedures using the appropriate
service tools and technologies.
Typical CC3 course outline:
Hours & Requirements:
Classes begin each morning at 8:30 and end at approximately 4:00 each afternoon. Attendees
should arrive wearing work clothes and appropriate work shoes. A laptop PC with hardware
interface is recommended when attending Tier4 or EMR classes.
DEUTZ Corporation Training Center
CC3 Course descriptions:
Sub 4 liter
Models: 1011, 1011F, 2011
Topics: Overview, maintenance, overhaul, fuel system
4-8 liter
Models: 1012, 1013, 2012, 2013, 4.1, 6.1, 7.8
Topics: Overview, maintenance, overhaul, fuel system
Above 8 liter
Models: 1015, 2015, 12.0, 16.0
Topics: Overview, maintenance, overhaul, fuel system, exhaust aftertreatment
Electronic governing
Models: 1012, 1013, 1015, 2011, 2012, 2013, 2015
Topics: Overview EMR, EMR2, EMR3, diagnoses, circuit testing
Sub 4 liter Tier4 F
Models: T/C/D2.9, 3.6 Tier4 i/f
Topics: Overview, maintenance, fuel system, exhaust aftertreatment
4-8 liter Tier4 F
Models: T/C/D4.1, 6.1, 7.8 Tier4 i/f
Topics: Overview, maintenance, fuel system, exhaust aftertreatment
Travel and accommodations:
The DEUTZ Corporation training facility is located at the following address:
The nearest major airport is Hartsfield-Jackson (ATL). Flights should arrive the day prior to class
and departure should be no earlier than 7PM on the last day of class due to possible traffic and
security delays.
Hotel accommodations are offered by the following:
A discounted rate can be obtained by using our corporate/promotional code which is "DTZ". Transportation to and from the training facility will be provided by the hotel. Please advise
during check-in that hotel transportation is required. The group will meet in the hotel lobby at
8:00 am.
Shuttle service to and from the airport is offered by:
Date Level Course Models
January
5 TO 8 CC3 Sub 4 liter 1011, 1011F, 2011
February2 TO 5 CC3 4-8 liter 1012, 1013, 2012, 2013
16 TO 19 CC3 Above 8 liter 1015, 2015, 12.0, 16.0
March1 TO 4 CC3 Sub 4 liter Tier4 F 2.9 & 3.6
15 TO 18 CC3 4-8 liter Tier4 F 4.1, 6.1, 7.8
April
12 TO 15 CC3 4-8 liter Tier4 F 4.1, 6.1, 7.8
26 TO 29 CC3 Sub 4 liter Tier4 F 2.9 & 3.6
May
10 TO 13 CC3 Sub 4 liter Tier4 F 2.9 & 3.6
24 TO 27 CC3 Electronic governing EMR, EMR2, EMR3
June
7 TO 10 CC3 4-8 liter Tier4 F 4.1, 6.1, 7.8
21 TO 24 CC3 Above 8 liter 1015, 2015, 12.0, 16.0
DEUTZ Corporation Training Registration E-mail to: [email protected] | Fax to: 770-564-7116
DEUTZ Corporation 3883 Steve Reynolds Blvd Norcross, GA 30093 Phone (770) 564-7100 E-mail: [email protected] www.deutzamericas.com
Training Registration
A copy of the emailed or faxed registration form must be mailed by postal service to the address below. Confirmation with information about hotel, transportation, etc. will be sent to the attendee’s attention upon receipt of registration. Please Print Attendee’s Name ___________________________________________________________________________ Certification # (if available) ___________________________________________________________________________ Employer ___________________________________________________________________________ Employer Address ___________________________________________________________________________ ___________________________________________________________________________ Service Manager _____________________________________ Phone: ______________________________ Date of School _____________________________________ Fax: ________________________________ DEUTZ Distributor Name _____________________________________ Email: _______________________________ DEUTZ Distributor Location ___________________________________________________________________________ School Location ___________________________________________________________________________
School Dates Dates must coincide with school schedule. Prices are subject to change without notice.
Dates Type of Training (Per Schedule) Cost
$640.00
Method of Payment: DEUTZ Corporation can only accept Purchase Orders from customers i.e. Distributors, OEMs that have an Account with DEUTZ Corporation. All OTHERS registering must Mail the registration form and enclose a check payable to: DEUTZ CORPORATION, Attn: Service Training, 3883 Steve Reynolds Blvd, Norcross, GA 30093
Distributor/OEM P.O. #: _________________________________________ All OTHERS’ Check #: ________________________ Distributor Comments: _________________________________________________________________________________________ Authorized Signature: _______________________________________________________ Date: ___________________________