development-growing low speed, increased accident rates
TRANSCRIPT
Traffic congestion-insufficient road development-growing
number of vehicles.
Low speed, increased accident rates, increased fuel
consumption, and increased pollution.
Impossible to build enough new roads or to meet the
demand.
The goal of ITS is to improve the transportation system to
make it more efficient and safer by use of information,
communications and control technologies.
ITS is comprised of a number of technologies,
including information processing, communications,
& control electronics.
Joining these technologies to our transportation
system will save lives, save time, and save money
Bus
Station
PIS, POS Terminal, Station Server, Local Network, Flap Gates, etc.
On-board
Bus
PIS, Camera, Multiplexing, Box PC, Driver Display/Console
Central
Server
Station
Database Server, Communication Infrastructure, Tracking Terminals, Video Walls, etc.
Core
Application
Automated Fare Collection (AFCS), Automated Vehicle Location (AVLS), PIS, Scheduling and Dispatch System, etc.
CAN Switch Module
Transmission ECU
Vehicle Box PC with 10.1”Touch Screen Driver Console Processor: Intel 3rd Generation Core i5/i7 System Memory: 2 x SODIMM, Max 32GB DDR3 Interfaces: WLAN, 2 x Ethernet, 6 x USB, 1 x CAN 2.0B, 2 x RS232, 1 x RS485/422/232, 1 x VGA, 2 x PS/2 , 1 x Line in/Line out/Mic in, 1 x Composite Connector for 4 CCTV camera inputs.
Ticketing Machine
Smart Card Reader
Destination Displays
Driver Info Display, Route Guidance/ Navigation – Connected to Box PV via VGA: 10.1" LED LCD with Cap. Touch Resolution: 1024 x 600
Passenger Info Displays within BUS Slave Display
RS485
USB
DVR – Video Recorder
WLAN
USB
Public Announcement System
I/O – MUX Front
I/O – Mux Rear
RS-485 Proprietary
Engine ECU
CAN 2.0B (SAE J 1939)
ABS ECU
RS485
CAT 5 Cable
Typical Architecture of Intelligent Bus
System Server
Financial Institutes
VDR / CAN Gateway
GPS – GPRS/3G/ CDMA
WLAN
GPRS
VGA Power
Box PC
Driver display
Bus
Camera
RFID Payment
GPS Receiver
Smart Card Reader
Passenger Information System
H.264/HD/VGA
Comm Port
RS485/232
USB USB
On-Board Vehicle ITS Components
ITS Compatible Bus Box PC with 10.1” Driver Console
CONTROLLER BOX PC
System Specifications:
Processor: Intel 3rd Generation Core i7/i5 processor
System Memory: 2 x SODIMM, Max 32GB DDR3 1333/1600
Input / Output Connectors:
1 x CAN 2.0B (J1939)
2 x RJ-45(10/100/1000 Μpbs)
2 x RS-232 Conn
1 x RS-232/422/485 Conn
1 x RS-232 (Optional)
1 x VGA Conn
4 x USB 3.0
2 x PS/2
1 x Line in/Line out/Mic in
2 x USB 2.0
1 x CAT-5 Conn for Slave Display (Digital Signage/PIS)
1 Composite Conn - 4 CCTV Camera Inputs
1 x Power/HDD LED
1 x Reset / Power on Button
Communication Ports:
3G SIM card slot; GPS; Wi-Fi
Driver Display/Console Specifications:
Viewable Size Image: 10.1"(16:9)
Display Resolution (pixel): 1024(H)x600(V)
Contrast Ratio: 500:1 (typ.)
Brightness: 200 cd/m2 (typ.)
Power Consumption: 10 W typical, normal operation
Touch Screen: Projective Capacitive Touch(USB)
Merits of ITS
Improved safety
Better traffic flow
Lower travel cost
Better environmental quality
Increased business activity
Greater user acceptance
Better travel information
Better planning information
Best possible medium to reach your target customers on the
bus.
Passengers on – board bus can sometimes feel bored and
want to catch some information.
Advertising or even location based information can be shown
by bus signage can develop an interest for passengers easily.
Effective signages where media content can be readily
updated interests not only the passengers but also can attract
potential revenue generation model for fleet operators.
GPS Trigger Content – Location based information update
Content Update – 3G/Wi-Fi(802.11b/g)/USB Flash Drive
Sunlight Readable – Trans-reflective/Panel Enhancement
Anti Vandal – Protection Glass
Anti Vibration & Shock
Voltage Input Protection with CPM Box
Controlling your fleet’s content centrally at any time through
Powerful management software “MSO Gold”
Wide voltage input (9-36VDC) design protects your digital
signage equipment
Flexibility with regard to content up gradation by either
3G/Wi-Fi/USB or GPS based triggering.
Built – in Network Player (HD – image processor)
Pole mounting options makes it easy for installation
Provides huge potential for new business opportunities for
advertisers to attract passenger’s attention
CPM Box
Features:
Protect Battery from deep discharge
Protect LCD and Player from over/under
Temperature
Protect wiring with Fuse for short circuits
Wake-Up function for over night conditions.
Minimized standby current
Master Display – 21.5”
Network Player – built in & Combo
Antenna (3G/GPS/Wi-Fi)
Features:
Active Display Area - 476.64mm(H) x 268.11mm(V)
Number of Pixels - 1920 x 1080
Contrast Ratio - 3000:1(typ.)
Display Color - 16.7M(8bit/color)
Brightness(cd/m2) – 300
Storage – 4GB CF Card – Expandable Option
Content Update – 3G/Ethernet/Wi-Fi/USB
Video Format Support – MPEG1,2,4, Divx, WMV,
AVI
Graphic Format Support – JPEG,BMP,PNG
Text Banner – Variable scrolling speed & position,
Static HTML, RSS Feed, GPS Trigger Content
Slave Display – 21.5”
Features:
Active Display Area - 476.64mm(H) x
268.11mm(V)
Number of Pixels - 1920 x 1080
Contrast Ratio - 3000:1(typ.)
Display Color - 16.7M(8bit/color)
Brightness(cd/m2) – 300
Optional VGA/Audio Input – Cat5 Receiver
Optional Video Input – S-Video, Composite
Network Media player with Video Input facility.
Network media player supports GPS location based content playing
( Image/Video/Audio).
Supports RSS feed with local player cache.
Supports Streaming over 3G network.
DVI-I/VGA/S-Video/CVBS video outputs
Supports standard media formats (JPG, WMV,MPEG, MOV, RSS.)
Overlapping text, scroll for emergency alert..
Automatic Weather information, currency & market updates.
Flexible screen layout with multiple zones for video, image, TV,
ticker…
Centralized content management and distribution.
THANK YOU!