DFX 100 Tx

DFX 100 Rx

FIBER OPTICS

DFX 100

The Extron DFX 100 fiber optic extender is a transmitter and receiver set

for long distance transmission of DVI signals over one fiber optic cable.

The DFX  100 can be used for simple point-to-point applications or in

combination with DMS Series Modular Matrix Switchers for larger systems

that require distribution and extension of high resolution digital video signals.

DVI FIBER OPTIC EXTENDER A Transmits single link DVI-D signals over one multimode fiber optic cable

A Supports DVI data rates to 4.95 Gbps - 1.65 Gbps per color

A Sends 1920x1200 and HDTV 1080p/60 signals up to 300 meters (984 feet)

A Supports DDC transmission

A Compatible with DMS Fiber Matrix Boards

A Integrated ultra-flexible DVI cable

A Compatible with 2LC OM4 MM P pre-terminated multimode fiber optic cables available from Extron

A Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment

FEATURESDESCRIPTION

A Transmits single link DVI-D signals over one multimode fiber optic cable

A Supports DVI data rates to 4.95 Gbps - 1.65 Gbps per color

A Sends 1920x1200 and HDTV 1080p/60 signals up to 300 meters (984 feet) – Extends digital signal transmission, maintaining superior image quality at the highest resolutions.

A All digital technology provides pixel-for-pixel performance with signals up to 1920x1200, including HDTV 1080p/60

A Supports DDC transmission – DDC channels are actively buffered, allowing continuous communication between source and display.

A Compatible with DMS Fiber Matrix Boards

A Industry standard LC connectors provide reliable physical connectivity and precise fiber core alignment

A Integrated ultra-flexible DVI cable – To simplify integration, ultra-flexible DVI cables attached to the transmitter and the receiver allow for direct connection to source and display devices.

A 1U high, one-eighth rack width metal enclosures – Rack-mountable transmitter and receiver are housed in compact metal enclosures for discreet installation.

A Compatible with 2LC OM4 MM P pre-terminated multimode fiber optic cables available from Extron – Cable assemblies are available in a variety of lengths from one meter (3.3 feet) to 60 meters (197 feet).

A Energy-efficient external universal power supply included, replacement part # 70-775-01 – Provides global compatibility, low power consumption, and reduced operating costs.

The Extron DFX 100 DVI Fiber Optic Extender is a compact transmitter and receiver set that provides extension of single link DVI-D signals long distances over one fiber optic cable. Engineered for reliability and exceptional high resolution image performance, it uses all-digital technology to deliver perfect pixel-for-pixel transmission of images up to 1920x1200, including HDTV 1080p/60. The DFX 100 extends DVI-D signals over a multimode fiber optic cable at lengths up to 300 meters (984 feet).

Both the transmitter and receiver are housed in 1U high, one-eighth rack width metal enclosures for convenient, discreet installation. To simplify integration, attached ultra-flexible DVI cables allow for direct connection to source and destination devices.

The DFX 100 can be used for simple point-to-point applications or in combination with DMS Series Modular Matrix Switchers for larger systems, offering an efficient fiber optic option for installations that require routing and long distance extension of DVI-D signals.

For connecting the DFX 100 transmitter and receiver, pre-terminated multimode fiber optic cable assemblies from Extron are available in a variety of lengths from one meter (3.3 feet) to 60 meters (197 feet). The extender features industry standard LC-type connectivity between transmitter and receiver.

The DFX 100 is ideal for a wide range of applications requiring long distance transmission of high resolution video content with the highest quality. Because transmission of content is inherently secure and immune to outside interference, fiber applications are favored in government, military, and medical environments.

DMS 2000

• Custom configurations provide both fiber optic and DVI I/O boards to support local and remote devices

• DMS Series Frames are available in a variety of sizes for I/O combinations from 4x4 to 36x36

• DMS Fiber Matrix Boards are compatible with DFX Series extenders and support distances up to 300 meters (984 feet)

• DMS DVI Matrix Boards feature automatic cable equalization for all inputs and output reclocking for each DVI output

DMS Series Modular DVI Matrix Switchers represent a new level of matrix switching for DVI. They combine the simplicity and reliability of a fixed I/O matrix switcher with the convenience and flexibility of a modular matrix switcher.

SPECIFICATIONS

NOTE: The DFX 100 TX/RX consists of a transmitter (DFX 100 TX) and a receiver (DFX 100 RX) with fiber optic cables linking the two units.NOTE: These devices are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21 CFR 1040.10, and FDA 21 CFR 1040.11

OPTICAL FIBER INTERCONNECTION BETWEEN TRANSMITTER AND RECEIVER

Number/type 1 fiber optic, multimode (OM3 or OM4 fiber recommended)

Connectors 1 LC connectorOperating distance 300 mNOTE: Operating distance is approximate. This is a typical maximum distance that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.Nominal peak wavelength 850 nm (multimode)Data rate 6.25 GbpsTransmission powerMultimode -5 dBm, typicalMaximum receiver sensitivityMultimode -12 dBm, typicalOptical loss budgetMultimode 8 dB, maximum

VIDEONOTE: *Appropriate HDMI to DVI-D cables or adapters are required for HDMI signal input/output.Resolution range Up to 1920x1200 or 1080p @ 60 Hz pixel for pixelFormats RGB, YCbCr, and xvYCC digital videoEDID Pass through from Rx unit to Tx unitStandards DVI 1.0, HDMI, CEA-861E

VIDEO INPUT — TRANSMITTERNumber/signal type 1 single link DVI-DConnectors 1 Male DVI-I, fixed cable 3.0'

VIDEO OUTPUT — RECEIVERNumber/signal type 1 single link DVI-DConnectors 1 Male DVI-I, fixed cable 3'

GENERALPower supply External

Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts

Power consumptionTransmitter 12 VDC, 220 mA, 2.5 WReceiver 12 VDC, 175 mA, 2.1 WTemperature/humidity Storage: -40 to +158 ˚F (-40 to +70 ˚C) /

10% to 90%, noncondensing Operating: +32 to +122 ˚F (0 to +50 ˚C) / 10% to 90%, noncondensing

Cooling Convection, no ventsThermal dissipationTransmitter 8.0 BTU/HrReceiver 6.8 BTU/HrMountingRack mount Yes, with optional 1U rack shelfFurniture mount Yes, with optional under-desk mounting kitPole mount Yes, with optional pole-mount kitEnclosure type MetalEnclosure dimensions 1.7" H x 2.2" W x 3.0" D (1 U high, one-eighth rack wide)

(4.2 cm H x 5.6 cm W x 7.6 cm D) (Depth excludes connectors.)

Product weight 0.5 lbs (0.3 kg)Shipping weight 3 lbs (2 kg)Vibration ISTA 1A in carton (International Safe Transit Association)Regulatory complianceSafety CE, c-UL, ULEMI/EMC CE, C-tick, FCC Class A, ICES, VCCIEnvironmental Complies with the appropriate requirements of RoHS,

WEEEWarranty 3 years parts and laborNOTE: All nominal levels are at ±10%.

Model Version Description Part numberDFX 100 Tx DVI Fiber Optic Transmitter 60-1254-12DFX 100 Rx DVI Fiber Optic Receiver 60-1254-13

For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.

Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City • Par is • London • Frank fur t

Amersfoor t • Moscow • Duba i • Johannesburg • New Delh i • Banga lore • S ingapore • Seou l • Shangha i • Be i j ing • Tok yo

UNITED STATES EUROPE ASIA MIDDLE EAST

Worldwide Sales Of�ces

+800.633.9876Inside USA/Canada

+1.714.491.1500

+800.3987.6673Inside Europe

+31.33.453.4040

+800.7339.8766Inside Asia

+65.6383.4400

+971.4.299.1800

© 2013 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.

APPLICATION DIAGRAM

PANEL DRAWINGS

DFX 100 Tx DFX 100 Rx

01-201368-2386-01 REV. ALetter - English - NP

1 -

45

- 8

9 -

1213

- 16

FAN ASSIMBLY

100-240V 50/60Hz

1.2A MAX.

100-240V 50/60Hz

1.2A MAX.

REDUNDANT

PRIMARY

DISCONNECT BOTH POWERCORDS BEFORE SERVICING

RE

SE

T

RS

232/

RS

422

RE

MO

TE

LAN A

CT

LIN

K

PRIMARY POWER SUPPLY REDUNDANT POWER SUPPLY

A BDVI-D INPUTS DVI-D OUTPUTS

DMS 44 DVI

DMS 44 DVI

DMS 44 DVI

DMS 44 DVI

C D A B C D

A BDVI-D INPUTS DVI-D OUTPUTS

C D A B C D

A BDVI-D INPUTS DVI-D OUTPUTS

C D A B C D

A BDVI-D INPUTS DVI-D OUTPUTS

C D A B C D

A B

TMDSFIBER

INPUTS

C D A B

TMDSFIBER

INPUTSDMS FIBER 44

C D

A B

TMDSFIBER

INPUTS

C D A B

TMDSFIBER

INPUTSDMS FIBER 44

C D

POWER12V- - A MAX

OUTPUT

INPUT

DFX 100 Tx

POWER12V- - A MAX

OUTPUT

INPUT

DFX 100 Tx

POWER12V- - A MAX

INPUT

OUTPUT

DFX 100 Rx

POWER12V- - A MAX

INPUT

OUTPUT

DFX 100 Rx

WiFi 1 2 3 4

WiFi 1 2 3 4

WiFi 1 2 3 4

ExtronDMS 1600Modular DVI Matrix Switcher

Projector

Flat Panel Display

Local PC

PC

PC

Local Monitor

Fiber Cable

DVI DVI

Fiber Cable

ExtronDFX 100 TxTransmitter

ExtronDFX 100 TxTransmitter

ExtronDFX 100 RxReceiver

ExtronDFX 100 RxReceiver

Up to 300m ( 984 ft ) on Multimode Fiber

Up to 300m ( 984 ft ) on Multimode Fiber

POWER12V- - A MAX

INPUT

OUTPUT

DFX 100 RxPOWER12V- - A MAX

INPUT

OUTPUT

DFX 100 RxPOWER12V- - A MAX

OUTPUT

INPUT

DFX 100 TxPOWER12V- - A MAX

OUTPUT

INPUT

DFX 100 Tx