did you know? · duralite aluminum body sanders nsn desc size orbit shroud pad vac 4130-01-517-1028...
TRANSCRIPT
DuraLite Aluminum Body SandersNSN Desc Size Orbit Shroud Pad Vac
4130-01-517-1028 DA Sander 6” 12K 3/16” Composite Velcro Central Vac4130-01-460-2508 Jitter Sander 2-3/4x8” 10K 1/8” Composite Velcro Central Vac
Two Hand Composite Body SandersNSN Desc Size Orbit Shroud Pad Vac
4130-01-482-1542 DA Sander 5" 12K 3/8" Composite Velcro Central Vac4130-01-482-1570 DA Sander 8" 12K 3/16" Composite Velcro Central Vac
Longboard SandersNSN Desc Size Orbit Shroud Pad Vac
4130-01-508-6533 Air File 2-3/4 x 16” 3000 SPM Metal Velcro Central Vac4130-01-517-0991 Air File 2-3/4 x 8” 2400 SPM Plastic Velcro Central Vac
SGV Sanders & Filter BagsNSN Desc
5130-01-645-3399 5in SGV Sander4130-01-460-8507 5in SGV Sander / Bag 50 pk4130-01-460-8508 6in SGV Sander / Bag 50 pk4130-01-460-8514 SGV Bag 100 pk
Hand SandersNSN Desc
4130-01-509-0261 Hand Sander 2.75in x 5in4130-01-509-0276 Hand Sander Kit 5in, 8in, 16in
Radius Sander Kit
2
Air File
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
AeroLite Composite Body Pneumatic Vacuum Sanders• Sander Kits include abrasives and additional accessories.
DuraLite Aluminum Body Pneumatic Vacuum Sanders
ErgoLite Composite Body Pneumatic Vacuum Sanders
Self Generated Sanders use the tool exhaust to create a vacuum, drawing sanding dust into a filter bag on the back of the sander.Available as bags alone or as a kit with either a 5” or 6” DA Sander.
ErgoLite Composite Body SandersNSN Desc Size Orbit Shroud Pad Vac
4130-01-504-3970 DA Sander 5” 12K 3/16” Composite Velcro Central Vac4130-01-458-8794 DA Sander 5” 12K 3/16” Composite Vinyl Central Vac4130-01-517-1019 DA Sander 6” 12K 3/16” Composite Velcro Central Vac4130-01-475-7627 DA Sander 6” 12K 3/16” Composite Vinyl Central Vac4130-01-460-4055 DA Sander 5” 12K 5/16” Composite Velcro Central Vac4130-01-460-4052 DA Sander 6” 12K 5/16” Composite Velcro Central Vac
Our Vacuum Hand Sanding Blocks come in 3 sizes and use hook and loop abrasives. The vacuum port can be hooked up to any vacuum for dust extraction. Use 2-3/4 x 16” abrasive which can be cut down to accommodate 2-3/4 x 8in or 2-3/4 x 5” sanders.
2-3/4 x 52-3/4 x 5 2-3/4 x 8 2-3/4 x 16
AeroLite Composite Body Sanders NSN Desc Size Orbit Shroud Pad Vac
4130-01-482-1549 DA Sander 3" 12K 3/16" Composite Velcro Central Vac4130-01-460-4031 DA Sander 3-1/2" 12K 3/16" Aluminum Vinyl Central Vac4130-01-494-7794 DA Sander 3-1/2" 12K 3/16" Composite Vinyl Central Vac4130-01-472-2181 DA Sander 3-1/2" 12K 3/16" Composite Velcro Central Vac4130-01-504-3971 DA Sander 5" 12K 3/16" Aluminum Velcro Central Vac4130-01-494-7792 DA Sander 6" 12K 3/16" Composite Velcro Central Vac4130-01-460-2510 Jitter Sander 3-2/3x7" 10K 1/8" Composite Velcro Central Vac4130-01-482-3125 Radius Sander Kit 3x4" 10K 1/8" Composite Velcro Central Vac4130-01-460-3201 DA Sander Kit 3-1/2" 12K 3/16" Composite Velcro Central Vac
These bags are for nuisance dust only. They are not HEPA rated.
3” Screen Hook & Loop 250 pkNSN Grit
5345-01-521-5652 805345-01-528-9897 1205345-01-521-4927 1805345-01-521-4926 2405345-01-521-6602 320
3x4” Screen Hook & Loop 250 pkNSN Grit
5345-01-521-5653 805345-01-521-4186 1205345-01-521-4536 1805345-01-521-4537 240
3-2/3 x 7” Screen Hook & Loop 250 pkNSN Grit
5345-01-521-4933 1205345-01-521-4540 1805345-01-533-0175 2405345-01-521-4929 320
2-3/4 x 16” Screen Hook & Loop 250 pkNSN Grit
4130-01-508-6536 804130-01-508-6538 1204130-01-508-6540 1804130-01-508-6542 2404130-01-508-6547 320
3.5” Screen Hook & Loop 100 pkNSN Grit
4130-01-501-7354 804130-01-501-7353 1204130-01-501-7351 1804130-01-501-7350 2404130-01-501-7352 320
5” Screen Hook & Loop 100 pkNSN Grit
4130-01-487-0776 804130-01-487-0798 1004130-01-487-0779 1204130-01-487-0804 1504130-01-487-0781 1804130-01-487-0782 2404130-01-487-0787 3204130-01-487-0788 400
6” Screen Hook & Loop 100 pkNSN Grit
4130-01-487-0790 804130-01-487-0793 1204130-01-487-0805 1804130-01-487-0806 2404130-01-487-0808 320
8" Screen Hook & Loop 50 pkNSN Grit
4130-01-482-1553 1204130-01-482-1554 1804130-01-482-1556 2404130-01-501-7348 320
2-3/4 x 8” Screen Hook & Loop 100pkNSN Grit
4130-01-517-1008 804130-01-517-1011 1204130-01-517-1015 180
3.5” Gold PSA 100 pkNSN Grit
4130-01-460-3184 804130-01-460-3185 1004130-01-460-3186 1204130-01-460-3187 1504130-01-460-3189 1804130-01-460-3191 2204130-01-460-3192 2404130-01-460-3194 3204130-01-460-3197 400
5” Gold PSA 100 pkNSN Grit
4130-01-459-9180 804130-01-459-9183 1004130-01-459-9184 1204130-01-459-9186 1504130-01-459-9188 1804130-01-459-9189 2204130-01-459-9190 2404130-01-459-9195 3204130-01-459-9196 400
5" Gold PSA Linkroll 100 pkNSN Grit
4130-01-459-9165 804130-01-459-9167 1004130-01-459-9168 1204130-01-459-9170 1504130-01-459-9175 1804130-01-459-9176 2204130-01-459-9178 240
6” Gold PSA 100 pkNSN Grit
4130-01-459-9601 804130-01-459-9604 1004130-01-459-9606 1204130-01-459-9607 1504130-01-459-9609 1804130-01-459-9610 2204130-01-459-9613 2404130-01-459-9617 3204130-01-459-9619 400
5” Clean Sanding Hook & Loop 100 pkNSN Grit
4130-01-459-5228 804130-01-459-5231 1004130-01-459-5236 1204130-01-459-5238 1504130-01-459-5251 1804130-01-459-5256 220
6” Clean Sanding Hook & Loop 100 pkNSN Grit
4130-01-459-5270 804130-01-459-5271 1004130-01-459-5272 1204130-01-459-5273 1504130-01-459-5274 1804130-01-459-5689 220
Gold PSA
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019 3
Gold Vacu-Discs feature a multipurpose aluminum oxide grain for coatings removal and finishing work. Gold abrasives have a pressure sensitive adhesive backing and holes for vacuum extraction.
Screen Abrasives provide the best possible dust extraction, with no holes to line up. These aluminum oxide abrasives feature a hook and loop backing, with no adhesives to dry out or fail.
2-3/4 x 16” abrasive can be cut down to accommodate 2-3/4 x 8” or 2-3/4 x 5” sanders.
These ceramic abrasives are designed to cut 2x as fast and last 4x as long as conventional abrasives. Spiral hole pattern improves dust collection over 5 or 6-hole abrasives.
High quality American Made backup pads are designed to fit most industrial sanders from Clayton, DCM, 3M, Dynabrade, and more. Vinyl faced pads feature a 5- or 6-hole pattern and are used with Gold PSA abrasives. Grooved pads are also for PSA abrasives, but feature dust channels so they work great even if the holes aren’t lined up. Multi-hole J-Hook pads provide the best possible dust collection, and have hooks that attach to Screen Abrasives or Clean Sanding discs.
Don’t forget Air Tool Oil
Vinyl Multi Hole J-Hook
Grooved
NSN 4130-01-502-0850
5” Backup PadsNSN Desc
4130-01-501-7031 Vinyl 5 Hole4130-01-458-8701 Grooved Vinyl 5 Hole4130-01-531-6799 JHook 5 Hole4130-01-531-6807 J-Hook Multi Hole
6” Backup PadsNSN Style
4130-01-531-6801 Vinyl 6 Hole4130-01-458-8704 Grooved Vinyl 6 Hole4130-01-531-6803 J-Hook Multi Hole
Pad ProtectorsNSN Desc
4130-01-482-1558 Pad Protector 5in JHook 50 pk4130-01-459-5701 Pad Protector 6in JHook 50 pk4130-01-459-5268 Pad Protector 3-1/2in JHook 50 pk3.5” Backup Pads
NSN Desc4130-01-460-3205 6 Hole Vinyl4130-01-526-0051 6 Hole JHook
3” Backup PadsNSN Desc
4130-01-459-5206 6 Hole Jhook
Did you know?
Link Roll
TP Style
TP Style
TP Style
2” TP Resin Bond Discs 100 pkNSN Grit
4130-01-459-2306 244130-01-459-2307 364130-01-459-2311 604130-01-459-2317 804130-01-459-2319 1004130-01-459-2321 1204130-01-459-2324 1504130-01-459-2327 1804130-01-459-2330 2404130-01-459-2332 320
3” TP Resin Bond Discs 100 pkNSN Grit
4130-01-459-2335 244130-01-459-2336 364130-01-459-2345 604130-01-459-2363 804130-01-459-2369 1004130-01-459-2374 1204130-01-459-2379 1504130-01-459-2382 1804130-01-459-2412 2404130-01-459-2414 320
2” TP Surface Prep Discs 100 pkNSN Grit
4130-01-459-6201 Coarse4130-01-459-6203 Medium4130-01-459-6209 X-Fine
2” TP Buffing Discs 100 pkNSN Grit
4130-01-459-5899 Medium4130-01-459-5900 Fine4130-01-459-5908 X-Fine
3” TP Surface Prep Discs 100 pkNSN Grit
4130-01-459-6211 Coarse4130-01-459-6214 Medium4130-01-459-6217 X-Fine
3” TP Buffing Discs 100 pkNSN Grit
4130-01-459-5917 Medium4130-01-459-5918 Fine4130-01-459-5922 X-Fine
Quick Change Disc HoldersNSN Style
4130-01-459-5177 2in TP Style Disc Holder, No Mandrel4130-01-459-5212 3in TP Style Disc Holder, No Mandrel4130-01-458-8341 2in Postiv-Lok Vacu-Disc Holder4130-01-458-8343 3in Postiv-Lok Vacu-Disc Holder
TP Style TR Style
TR Style
TR Style
4 For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
Right Angle Shrouds are designed to collect dust and debris when sanding or grinding with 2” or 3” abrasive discs. They fit any grinder with a 1/4” collet, and have a multi-hole pad to improve efficiency. The Clear Revolution shrouds are molded from clear Lexan. The Aluminum Revolution shrouds are machined from aircraft grade aluminum and anodized.
Postiv-Lok quick change discs provide great dust extraction when used with a shrouded grinder. The tough aluminum oxide abrasive grain makes short work of coatings and corrosion. All Postiv-Lok discs use the 6-point TP attachment method. Available in resin bond, surface-prep, and buffing discs.
Replacement Postiv-Lok quick change disc holders or backup pads work with our TP style Postiv-Lok quick change discs and dust collection shrouds. Choose your pad based on your shroud below.
TP Disc Holder No Mandrel
TP Postiv-Lok Vacu-Disc Holder
Right Angle Grinder Shrouds (no grinder)NSN Desc
4130-01-459-8270 2in Aluminum Revolution Shroud TP Style4130-01-459-8274 3in Aluminum Revolution Shroud TP Style4130-01-459-8280 2in Clear Revolution Shroud TP Style4130-01-459-8287 3in Clear Revolution Shroud TP Style4130-01-460-4048 2in Clear Revolution Shroud TR Style
Right Angle Shrouded Grinders (TP Style)NSN Desc
4130-01-483-3946 2in Aluminum Rev Shrouded Dotco 12LF280-364130-01-483-3942 3in Aluminum Rev Shrouded Dotco 12LF280-36
TR Style Shroud Kits provide everything you need to be up and running for dustless sanding or grinding, just add a vacuum! Kits include shroud (or shrouded grinder), abrasives, tools, and a section of vacuum hose. These kits use the TR attachment method.
Shroud KitsNSN Desc
4130-01-458-8326 2in TR Clear Shroud Kit with Abrasives4130-01-458-8324 2in TP Clear Shroud Kit with Abrasives4130-01-459-1793 3in TR Clear Shroud Kit with Abrasives4130-01-458-8329 3in TP Clear Shroud Kit with Abrasives
2” TR Surface Prep 250 pkNSN Grit
5345-01-620-6573 Coarse5345-01-620-6415 Medium5345-01-620-7664 Fine
Shrouded Grinder KitsNSN Desc
4130-01-458-8661 2in TR Clear Shrouded Grinder Kit with Abrasives4130-01-458-8663 3in TR Clear Shrouded Grinder Kit with Abrasives
Clear Revolution Seat Track ShroudsNSN Desc
1680-01-641-7585 Clear Revolution Seat Track Shroud Cotton Fiber5130-01-641-7594 Seat Track CF Abrasive 54G 50 pk
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019 5
The 12,000 RPM belt sander is a must-have for your tool arsenal. This 12” x ½” tool can be used with or without the dust collection shroud. The powerful 0.4 hp motor powers through coatings and helps to shape and trim composites and metal. The belt arm can be rotated around the motor to accommodate different angles.
Aircraft seat tracks are notoriously difficult to clean and typically consume large numbers of small abrasive discs. The Clear Revolution shroud for seat track cleaning and corrosion removal allows users to quickly change abrasives without wrenches or other tools and the vacuum extraction collects both the corrosion and abrasive debris.
Oscillating Multi ToolsThese tools offer tremendous flexibility for cutting, scraping, sawing, and sanding in tough to reach areas. Tool Kits include an assortment of saw blades and sanding pads with abrasives. Detail Vacuum Sander includes backup pad and vacuum shroud attachment.
MultiMaster Oscillating Pneumatic Tool Kit
Shrouded Pneumatic Triangle Vacuum Sander
MultiMaster Supercut Oscillating Cordless Tool Kit
Multi ToolsNSN Desc
4130-01-459-4396 MultiMaster Oscillating Pneumatic Tool Kit4130-01-460-8510 MultiMaster SuperCut Oscillating Cordless Tool Kit4130-01-496-3762 Shrouded Pneumatic Triangle Sander4130-01-459-4393 Shroud for Triangle Detail Sander4130-01-459-4400 Detail Sander Backup Pad, Hook, 2-pk
Triangle AbrasivesNSN Grit
4130-01-459-4406 364130-01-459-4422 604130-01-459-4431 804130-01-459-4444 1204130-01-459-4457 1804130-01-459-4460 240
Angle Orbital SanderNSN Desc
4130-01-460-8515 Angle Orbital Sander 1.25in 8k Shrouded Kit
The 1-1/4” Angle Orbital Sander is great for denibbing and material removal. Kit includes sander, dust collection shroud, backup pad, and aluminum oxide abrasives and buffing discs organized in a convenient case.
Belt SanderNSN Desc
4130-01-460-8182 Belt Sander 1/2in x 12in with Shroud
Abrasive BeltsNSN Desc
4130-01-460-2529 Abr Belt, 1/2in x 12, 120 Grt, 100 pk4130-01-460-2533 Abr Belt, 1/2in x 12, 80 Grt, 100 pk
Pneumatic Right Angle Drum Sander with vacuum extraction. Includes 2’ of 1” vacuum hose and 1” swivel cuff. Use with drum or remove shroud to use as a standard right angle grinder.
Drum SanderNSN Desc
4130-01-460-5366 Right Angle Drum Sander 1in 12K RPM
Drum Sander AbrasivesNSN Desc
4130-01-494-2040 1in x 1in x 36G4130-01-494-2044 1in x 1in x 60G4130-01-494-2047 1in x 1in x 80G4130-01-494-2059 1in x 1in x 120G4130-01-494-2053 1in x 1in x 240G
Don’t forget Air Tool Oil
NSN 4130-01-502-0850
Pneumatic GrindersNSN Grinder RPM HP Mount
4130-01-458-8676 Grinder 4.5in 12K 1.7 5/8-11 spindle4130-01-458-8677 Grinder 7in 8.5K 1.7 5/8-11 spindle4130-01-460-4079 Grinder Straight 12K 0.9 1/4 collet4130-01-464-0047 Grinder Straight 23K 0.9 1/4 collet4130-01-458-8672 Grinder Rt Angle 12K 0.4 1/4 collet4130-01-485-6470 Grinder Rt Angle 20K 0.4 1/4 collet
Pneumatic RoutersNSN Desc Collet RPM HP Air Inlet
4130-01-508-8375 Base Mount Router 3/8” 18,000 1.7 1/2”4130-01-459-1485 Inline Router 1/4” 23,000 0.9 1/4”
6 For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
Pneumatic routers are awesome for woodwork, composites, panel trimming and more. The fixed base 1.7HP router has adjustable depth control and a vacuum connection. The straight router is very versatile. It can be used as a ¼” collet straight grinder, a fixture router with the included router guide, and the dust collection shroud can be added for FOD and dust control
Diamond Pattern router bits feature an aggressive cutting edge that makes short work of honeycomb, aluminum, and composites.
These saws provided all the power you need to cut though advanced composites, fiberglass, and more.
Diamond Cutoff Blades slice easily through composite panels. The diamond cutting edge has a long life and slots in the discs help keep the discs cool.
Diamond Router BitsNSN Desc
4130-01-501-7035 3/8” Router Bit4130-01-462-2106 1/4” Router Bit
Cutoff SawsNSN Desc Diameter Arbor
4130-01-494-2021 Cutoff Saw 4in Shrouded with Diamond Blade 1/16 kerf 4in 3/4in4130-01-460-4079 Cutoff Saw 3in Alum Shrouded 12K .9hp Straight 3in 1/4in4130-01-464-0047 Cutoff Saw 3in Shrouded 23K Straight 3in 3/8in4130-01-517-1033 Cutoff Saw 2in Shrouded 20K .3hp Rt Angle 2in 1/4in4130-01-460-4078 Cutoff Saw 2in Alum Shrouded 12K .4hp Rt Angle 2in 1/4in
Diamond Cutoff BladesNSN Desc Diameter Arbor
4130-01-532-0768 Cutoff Wheel Diamond 4in OD x 3/4in ID 4in 3/4in4130-01-501-8633 Cutoff Wheel Diamond 4in OD x 3/8in ID 4in 3/8in4130-01-462-2088 Cutoff Wheel Diamond 3in OD 1/4in ID 3in 1/4in4130-01-481-6292 Cutoff Wheel Diamond Slotted 3in OD x 1/4in ID 3in 1/4in4130-01-517-1038 Cutoff Wheel Diamond 2in OD x 1/4in ID 2in 1/4in
The most trusted grinders in the military. These tools are ergonomically designed and use the highest quality components to ensure a long service life. Straight grinders include dust collection shrouds for cutoff blades.Grinding wheels are tough and made for the most demanding metal work.
Grinding WheelsNSN Desc
4130-01-459-5923 4.5in Grinding Wheel 100pk
Don’t forget Air Tool Oil
4130-01-460-40784130-01-460-4079
4130-01-517-10334130-01-494-2021
7” Grinder
4.5” Grinder
4130-01-464-0047
NSN 4130-01-502-0850
Pneumatic Needle Scaler kits with vacuum extraction, 19 x 3mm and 38 x 2mm needles. Available in Pistol Grip or Inline Straight.Needle Scaler
NSN Description4130-01-459-1441 Vacu-Needle Scaler Pistol Grip Kit 19x3mm4130-01-460-7705 Vacu-Needle Scaler Inline Kit 19x3mm4130-01-459-3591 Needle Scaler Needles 19x3mm4130-01-459-3594 Needle Scaler Needle Holder 19x3mm4130-01-459-3581 Needle Scaler Needles 38x2mm4130-01-459-3583 Needle Scaler Needle Holder 38x2mm4130-01-460-5299 Needle Scaler Shroud4130-01-487-5086 Vacu-Needle Scaler-Rebuild Kit Pistol Grip
Inline Straight
US-Made Cobalt Aircraft Drilling Kits.These two kits are what fabricators and maintainers have been waiting for – everything you need for sheet metal repairs. The Jobber Kit contains:• 3 x 100˚ Zero Flute Countersink Cutters (1 each 3/32”-1/4”, 1/8”-27/64”, 3/16”-35/64”)• 24 x Blind Hole Spotters (6 each 1/8”, 5/32”, 3/16”, 1/4”)• 5 x Drill Stops (1 each #10, #21, #30, #40, 1/4”)• 120 x Cobalt Drill Bits (24 each #10, #21, #30, #40, 1/4”) • 1 x Angle Drill Collet Chuck Kit• 1 x Compartment CaseThe Threaded Kit contains:• 150 x Threaded Cobalt Bits (30 each #10, #21, #30, #40, 1/4”) (short, stubby, and long lengths)• 1 x 2” threaded drill extension • 1 x 4” threaded drill extension• 1 x Compartment Case
Drill BushingsNSN Desc
4130-01-502-1329 Drill Bushing Slip Fixed #10 (.1935) 1/2in OD4130-01-502-1330 Drill Bushing Slip Fixed #21 (.1590) 1/2in OD4130-01-502-1331 Drill Bushing Slip Fixed #30 (.1285) 1/2in OD
Drill BushingsNSN Desc
4130-01-502-1333 Drill Bushing Slip Fixed #40 (.0980) 1/2in OD4130-01-502-1334 Drill Bushing Slip Fixed 1/4in (.2500) 1/2in OD4130-01-462-2097 21pc Drill Bushing Set Slip Fixed (1/16in - 3/8in)
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019 7
Our Universal Drill Shroud attaches between the drill body and chuck. It will work with any non-reversing drill that has a 3/8-24 chuck. Our Soft Drill Shroud will work with ANY drill. Right angle drill is designed for heavy use. It features a ¼-28 threaded head, runs 3300 RPM, and includes a 100 piece set of threaded cobalt aircraft bits and a dust collection shroud.
US-Made Cobalt 21-piece extension set in steel index, ranging from 1/16 – 3/8, in 1/64 increments.
US-Made Cobalt Jobber aircraft bit replenishment set. Contains 60 each #10, #21, #30, #40, and 1/4” bits.
US-Made Cobalt Threaded aircraft bit replenishment set. Contains 20 each #10, #21, #30, #40, and 1/4” short bits.
This set includes a 1” diameter and a 2” diameter clear polycarbonate drill guides. These guides hold your bit perpendicular to the work surface for a straight hole every time. The vacuum attachment removes all shavings, dust, and drilling FOD. Guides are compatible with industry standard slip-fixed drill bushings (sold separately below).
The Microstop Countersink Shroud Kit includes clip-on shrouds designed to fit microstops from 0.625” to 2.0” diameter. These clip-on shrouds snap directly to the microstop, providing vacuum collection for chips and dust, and allow you to use microstops already in your inventory. Kit includes 12 shrouds, adapter hoses, and carrying case.
Slip Fixed Drill Bushings drop into our drill guides and lock with a quarter turn.
Universal Drill Shroud with Drill
Threaded Right Angle Drill
Soft Drill Shroud
Drill BitsNSN Desc
4130-01-462-2100 29pc Drill Bit Extension Set (1/16in - 1/2in)
Jobber Bit Replenishment SetNSN Desc
4130-01-460-8194 Drill Kit Jobber Cobalt Replenishment 300PC
Drilling KitsNSN Desc
4130-01-460-8193 Drill Kit Threaded Shank (Long,Short,Stubby)4130-01-460-8192 Drill Kit Smooth Shank with Accessories
Drill GuidesNSN Desc
4130-01-502-1336 Clear Rev Slip Fixed Drill Guide Set (1in & 2in)
Microstop Shroud KitNSN Desc
4130-01-459-8316 Microstop Clip On Shroud Kit, 12 PC
Threaded Bit Replenishment SetNSN Desc
4130-01-460-7537 Drill Kit Threaded Cobalt Replenishment 100PC
MADE IN USA
Drills & ShroudsNSN Desc
4130-01-459-8385 Universal Drill Shroud (no drill)4130-01-459-1456 Drill Shroud & Atlas Copco 3300 rpm4130-01-460-4041 Soft Drill Shroud 1-3/8in ID4130-01-459-1460 Drill Kit, Right Angle Threaded with Bits 3300 rpm
Microstop Not Included
Shroud
Hammer Drill KitNSN Desc
4130-01-501-7032 Hammer Drill Kit with Soft Drill Shroud4130-01-502-1337 Masonry Drill Bit Set (3/16, 1/4, 3/8, 1/2, 5/8, 3/4)4130-01-502-1321 Masonry Bit 3/16in4130-01-502-1322 Masonry Bit 1/4in4130-01-502-1324 Masonry Bit 3/8in4130-01-502-1325 Masonry Bit 1/2in4130-01-502-1326 Masonry Bit 5/8in4130-01-502-1332 Masonry Bit 3/4in
Includes:
8 For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
Get Jiggy with it! – Cordless Jigsaw kit includes saw, 80 blades, charger, battery, and rugged US-made tool bag.
Cordless Saw KitNSN Desc
4130-01-532-0766 Cordless Saw Kit, Circular & Reciprocating
Construction Grade Tools These heavy duty construction grade tools will make short work of your next project. Each kit includes tools, a heavy duty backpack tool bag, and accessories.
The Cordless Saw Kit includes both reciprocating and circular saws, along with blades, accessories, and bag. These tools use the most powerful batteries available today.
The Cordless Grinder Kit uses a 4.5” grinding wheel to make short work of metals of all types, or add a flap disc or abrasive disc to sand wood and carve totem poles. Kit includes tool, bag, batteries, and 20 grinding wheels.
The Rotary Hammer is purpose built for drilling in masonry and concrete, or switch to hammer only mode for light chipping and demolition. Kit includes drill, tool bag, and a dust shroud to comply with new OSHA silica requirements.
The Drill Driver Kit includes two industry leading tools – the cordless driver accepts 1/4” hex shank bits, and the drill’s 3/8 chuck handles most tasks. Kit includes tools, batteries, tool bag, bit set, and 12 each cobalt aviation bits in 1/4”, #10, #21, #30, and #40 sizes.
The Demolition Hammer is a beast, making short work of concrete and stone. It includes a dust shroud to comply with new OSHA silica requirements.
Demolition Hammer KitNSN Desc
4130-01-517-1041 Demolition Hammer with Dust Shroud4130-01-517-1045 Chisel Set, Flat, Point, & Scaling Tips (3 chisels)
Drill Driver KitNSN Desc
4130-01-476-1493 Drill Driver Kit with Accessories4130-01-460-8194 Drill Kit Jobber Cobalt Replenishment 300PC
Rotary Hammer Drill KitNSN Desc
4130-01-460-9693 Rotary Hammer Kit with Dust Collection Shroud
JigsawNSN Desc
4130-01-459-1468 Jigsaw Cordless Starter Kit with Blades
Cordless Grinder KitNSN Desc
4130-01-460-5309 Cordless Grinder Kit, 4.5 in with 20 Discs4130-01-459-5923 4.5in Grinding Wheel 100pk
The Hammer Drill can be used for standard drilling in wood and metal, or switched to hammer mode for concrete and masonry. Kit includes drill, batteries, tool bag, and dust collection shroud.
20 x Fine
20 x Coarse
20 x Tight Radius Cut
20 x Extreme Radius Cut
Lexan Shield
10mm to 36mm
3/8 to 1-1/2in
7/16in to 1in13mm to 24mm
Differential Pressure Gauges
5” Casters
Panel Filters(MERV 8 and
MERV 13 filtration)
Removable Large Debris Tray
25’ Power Cord
Large Open Face 31w x 13h
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019 9
Impact DriverNSN Desc
4130-01-507-7021 Impact Driver Kit with SAE & Metric Sockets
The Posi-Vac Impact Driver Starter Kit gives you everything you need to tackle the most demanding jobs. The powerful 1/2” Impact Wrench with 2 batteries is accompanied by SAE and metric deep impact sockets, SAE and metric shallow impact sockets, 1/2” ratchet, adapters, and a tough tool backpack.
The Corded Router Kit includes the most powerful 2.25 HP motor and three versatile bases for general woodworking, plunge routing, or the universal D-handle for the best in ergonomics. It also includes router bits, a tool bag and a portable pneumatic HEPA vacuum to control dust. Outfit your woodshop shop today and be the envy of your team.
Corded Router KitNSN Desc
4130-01-459-1483 Corded Router Kit with Vacuum and Bits
The Tent & Vent is a high flow air filtration unit designed to allow aircraft painting on the hangar floor without exposing workers to overspray and VOCs. This unit adheres to NESHAP Test Method 319 for Aerospace painting and de-painting operations and meets all standards for the safe evacuation and filtration of chromated primers and other coatings. The powerful air motor delivers over 1200 cfm of air flow to easily evacuate 12x10x10 painting tents. The air powered system consumes 60 CFM @ 90 PSI. NSN includes Tent & Vent, 18” inlet extension, 12” muffler, grounding cable, 30’ compressed air line, poly film, and a supply of primary and secondary filters to ensure that you’ll be operational upon receipt of the unit.
Testing performed by the US Military showed that the Tent & Vent maintained exposure levels below both the Action Level and the Occupational Environmental Exposure Limit for Hexavalent Chromium.
Consumable Replenishment Kit Contents• Extra Filters (1 case of each)• Intake Filter Media• Exhaust Poly Ducting• 4 Mil Tenting Film• Rosin Paper Floor Covering• Masking Tape• Tactical Shears• Cleaning Wipes
Tent & VentNSN Desc
4130-01-503-9364 Tent & Vent with Accessory Package4130-01-460-8189 Consumable Replenishment Kit
Grinding StationNSN Desc
4130-01-533-7425 Grinding Station 1350
Stand at this HEPA filtered grinding station to work on small parts without source capture vacuum tools. 1350 CFM and a face velocity of 450 ft/min entrain dust and a three stage filtration system captures it. Safe Filter Change allows users to change stage 1 & 2 panel filters without exposure to hazardous dust.
Features:• Three Stage Filtration • Stage 1 MERV 8 Primary Panel Filter• Stage 2 MERV 13 Secondary Panel Filter• Stage 3 HEPA Cartridges filter 99.97% of particles down to 0.3 μm
• Differential pressure gauges monitor filters• Large work area 31w x 12d x 13h• Overall 32w x 37d x 50h x 300 lbs• Requires 120V 20A circuit
30gal Garbage Bag HEPA Filter
Warthog series HEPA vacuums are available in either air powered or electric, 5 or 15 gallon, and steel or poly tanks. All vacuums are packaged with a 20’ hose and filters. (Cleanup tools are included with some kits). True HEPA filtration makes these vacuums suitable for lead, asbestos, hexavalent chromium, strontium, and other toxic and hazardous dust and debris. Made in the USA from industrial quality components, these vacuums are made to last for years.
FOD kits include an assortment of cleanup tools specifically chosen for aircraft FOD cleanup. They feature 5 gallon poly tanks powered by air or electric.
Wet / Dry kits are 15 gallon poly tanks engineered for wet or dry pickup. An assortment of cleaning tools handles any tough job.
Do you have one of these existing Blue DCM HEPA Vac and need filters?
Cleanup kit includes an assortment of cleanup tools for general use.
Prefilter
30gal Garbage Bags HEPA Filter 5 Gal Vac
FOD
15 Gal Vac
The Warthog HEPA Backpack Vacuum makes sanding and cleanup fun and easy. Well, maybe just easy. Lightweight poly tank and padded backpack harness are ergonomic, and the powerful industrial motor makes short work of FOD and dust. 2.5 gallon filter capacity minimizes bag changes. Final stage HEPA protects against heavy metal dust exposure. The Backpack Vacuum is an excellent choice for FOD cleanup and Vacuum Sanding.
Back Pack VacNSN Desc
4130-01-501-7033 Backpack HEPA Vac 2.5 Gal 120V FOD Kit
20’ Hose
10 For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
VacsNSN Desc
4130-01-458-8679 WartHog Aero HEPA Vac 5G 120V Poly & Hose4130-01-459-0556 WartHog Aero HEPA Vac 5G Air Poly & Hose4130-01-459-0584 WartHog Aero HEPA Vac 15G 120V Steel & Hose4130-01-459-0559 WartHog Aero HEPA Vac 15G Air Steel & Hose
Supplies for Yellow Clayton VacsNSN Desc
4130-01-459-1257 Filter Bag 5 Gal Poly 5 Pak7910-01-459-0352 Filter Bag, 15gal Warthog 5pk4310-01-520-6794 HEPA Filter for Warthog Vacuums8105-01-521-2119 Heavy Duty 30gal Garbage Bags, 25pk4130-01-459-1298 Heavy Duty 30gal Garbage Bags, 5pk
Vac FOD KitsNSN Desc
4130-01-459-0563 WartHog Aero HEPA Vac 5G 120V Poly & FOD Kit4130-01-503-9359 WartHog Aero HEPA Vac 5G Air Poly & FOD Kit
HEPA Cleanup Vacuum KitNSN Desc
4130-01-459-0656 Electric WartHog Vac & Cleanup Kit
Wet / Dry Vac KitsNSN Desc
4130-01-459-5894 WartHog Wet-Dry HEPA Vac 15G 120V w Cleanup Kit4130-01-459-5895 WartHog Wet-Dry HEPA Vac 15G Air Poly & Cleanup Kit
Supplies for Blue DCM VacsNSN Desc
4130-01-459-1257 Filter Bag 5 Gal Poly 5 Pak4130-01-459-1249 HEPA Filter Wrap for 5 gal Vac 2 pak4130-01-459-1246 DCM Infiltrator HEPA for 5 Gal7910-01-459-0352 Filter Bag, 15gal Warthog 5pk7910-01-458-9363 Prefilter 2 Pak for Infiltrator 15 Gal HEPA4130-01-459-1248 DCM Infiltrator HEPA for 15 Gal8105-01-521-2119 Heavy Duty 30gal Garbage Bags, 25pk4130-01-459-1298 Heavy Duty 30gal Garbage Bags, 5pk
Vacuum Cleanup KitNSN Desc
4130-01-492-6049 Cleanup Toolkit - FOD Collection
Clean Up Tools for Use on End of Hose - 1-1/2” CuffNSN Description Material
4130-01-492-6050 Rubber Nozzle - 1.5in x 9in Rubber4130-01-478-3108 FOD Wand 3/4in x 1in x 18in (15 element) Plastic4130-01-459-1321 3in Round Vacu-Dus Brush (1in FHT) Plastic4130-01-459-1427 Crevice Tool - Poly 1.5in x 11in Plastic4130-01-494-2015 Crevice Tool - Alum 1.5in x 24in Metal4130-01-494-2018 Bulk Pickup Tool - 1.5 x 18 Aluminum Metal4130-01-508-6528 Personnel Cleanup Brush Plastic
Double Bend Wand and Floor Tools - 1-1/2” COLLAR RINGNSN Description Material
4130-01-500-6102 Wand - Aluminum 2-Bend Telescoping (collar ring) Metal4130-01-459-1424 Wand - Aluminum 2 PC 2-Bend 1.5in x 56in (collar ring) Metal4130-01-503-9104 Floor Tool - Poly 1.5in x 20in Nylon Bristles (collar ring) Plastic4130-01-492-6045 Floor Tool - Alum 1.5in x 14in Nylon Bristles (collar ring) Metal
Cleanup Hoses are 1-1/2” crush proof conductive vacuum hose terminating in a 1-1/2” cuff and 1-1/2” metal sleeve. Combo Hoses add a compressed air line with fittings and terminate in 1” raw vacuum hose for connection to sanders and shrouded tools.
Quick-Lok Adapter allows the hoses above to be used with blue DCM vacuums.
Cleanup Hose
Quick-Lok Adapter
Combo Hose
Quick-Lok AdapterNSN Desc
4130-01-460-2498 1-1/2in Quick-Lok Swivel Connector Cuff Assy
Cleanup HosesNSN Desc
4130-01-460-6094 Vacuum Cleanup Hose, 1.5in X 10ft4130-01-460-1448 Vacuum Cleanup Hose, 1.5in X 20ft4130-01-460-6558 Vacuum Cleanup Hose, 1.5in X 30ft4130-01-460-6568 Vacuum Cleanup Hose, 1.5in X 40ft4130-01-460-6577 Vacuum Cleanup Hose, 1.5in X 50ft
Air / Vac Combo HoseNSN Desc
4720-01-652-0544 Air Vac Combo Hose 1.5in X 1in X 10ft4130-01-460-6088 Air Vac Combo Hose 1.5in X 1in X 15ft4130-01-460-1438 Air Vac Combo Hose 1.5in X 1in X 20ft4130-01-460-6091 Air Vac Combo Hose 1.5in X 1in X 30ft4720-01-519-7365 Air Vac Combo Hose 1.5in X 1in X 40ft4130-01-460-1442 Air Vac Combo Hose 1.5in X 1in X 50ft
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019 11
Floor Tool
Cleanup Tools have a 1-1/2” OD and are designed for connection to a 1-1/2” hose cuff or a 1” female hose thread for 1” vacuum hose.
FOD Floor Tool
Wand
20in 14in
Telescoping
2 Piece
24in Crevice
9in Cone
Bulk Pickup
Dust Brush
11in Crevice
Cleanup Brush1in thread
FlexLoc Wand1in thread
Turbine Brush
Wand, dust brush, crevice tool, gulper, and flex-loc FOD tool have a 1-1/2” OD and are designed for connection to a 1-1/2” hose cuff.
Collar Ring Attachment
Friction Fit AttachmentFloor tools are aluminum or high impact ABS. Simply press the wand in to form an airtight fit.
Collar Ring AttachmentOur heavy duty general floor tools, aluminum and high impact ABS, use a quick twist Collar Ring attachment method and have replaceable brushes.
Cleanup Tools - FRICTION FITNSN Desc
4130-01-503-9115 Clean Up Toolkit - FOD Floor Tool & Wand4130-01-459-1433 FOD Floor Tool, Aluminum 1.5in x 12 (friction fit)4130-01-483-1891 Wand - Aluminum 2 PC 1-Bend 1.5in x 54in (friction fit)4130-01-492-6048 Floor Tool - Poly 1.5in x 14in Nylon Bristles (friction fit)4130-01-478-3104 Turbine Brush - 11in Wand Style (friction fit)
Use adapter hoses to connect sander and shrouded tools to cleanup hoses.
Adapter HosesNSN Desc
4130-01-460-1339 Adapter Hose 5ft - 1in Cuff to 1.25in Cuff4130-01-460-6084 Adapter Hose 10ft - 1in Cuff to 1.25in Cuff
Made in America Since 1866
NSN 8965-01-578-1410Not made by Clayton
but it’s a good NSN to have
HEPA Vacuum Sanding SystemsNSN Desc
4130-01-532-9524 Pneumatic Vacuum - 4 Sander Kit5130-01-413-9122 Pneumatic Vacuum - 5 Sander Kit5130-01-551-2270 Electric Vacuum - 6 Sander Kit
Vacuum Bags & FiltersNSN Desc
7910-01-520-6435 Filter Bag Dustmaster 5pk4310-01-520-8595 Filter Bag Dustmaster Cyclone 10pk4310-01-519-5205 Pre-Filter Dustmaster 3pk4310-01-519-5796 ULPA Filter U15 DustMaster 1pk
12
The smallest pneumatic HEPA vac you’ve ever seen! The Scorpion is perfect for FOD collection in tight spaces, or vacuum sanding when portability is a must. The clear housing is made from the same clear material used in NASCAR windshields and astronaut helmets. This vacuum may be small, but it is tough, and it packs a punch!
• 4’ x 1” Vac hose• 4’ x 1/4” Comp air line• Assorted cleanup tools• Prefilter 5 pack• Extra HEPA filter
Dust BrushTool Compressed
Air Line
Crevice Tool
Gulper ToolFlexloc
FOD Wand
4 Sander Kit4130-01-532-9524
(1) HEPA Vac(2) 3-1/2in Sanders(2) 5in Sanders(2) 20ft Hoses
400 sheets of assorted abrasives, filters, and accessories
USAF & US ArmyRecommended
5 Sander Kit5130-01-413-9122
(1) HEPA Vac(2) 3in Sanders(2) 6in Sanders(1) 2in Grinder(2) 20ft Hoses(1) 30ft Hose
Over 1500 sheets of assorted abrasives, backup pads, filters, and accessories
NAVAIR 509 Authorized
6 sander Kit5130-01-551-2270
(1) HEPA Vac(2) 3in Sanders(2) 6in Sanders(1) 3x4in Sander(1) 3x7in Sander(2) 20ft Hoses(1) 30ft Hose
Over 4000 sheets of assorted abrasives, backup pads, filters, and accessories
NAVAIR 509 Authorized
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
Pneumatic Portable HEPA VacNSN Desc
4130-01-503-9363 Hornet Vacuum Sanding System with Accessories7910-01-390-5761 Hornet Vacuum Sanding System (NAVAIR)4460-01-519-5158 HEPA Filter for Hornet / Scorpion4460-01-519-5125 Filter Bag, Super Hornet, 10 pk
The Hornet vacuums are air powered HEPA vacuums that can be used for FOD cleanup, dustless sanding, or general cleaning. The vacuums are rated for use in combustible dust atmospheres, and the cartridge filter gives true HEPA performance. The kits are turnkey, and include sanders, accessories, the vacuum, and more. They are ready to be deployed immediately upon receipt. Two kits are available – the one starting with 4130 is for general use and is available to all services. The one starting with 7910 is included in the NAVAIR 509 manual for corrosion control. Choose either one.
Kit ContentsHornet VacuumBackpack HarnessFlexLoc FOD Wand6in DA Sander 3/16 Orbit3in DA Sander 3/16 OrbitPad Protector 6in JHook 50 pk Pad Protector 3in JHook 50 pk Backup Pad 6in MultiholeBackup Pad 3in 6 holeCombination Air/Vac Hose 8ftFilter Bag 10 pkAbrasive Sheets 600 pcsAircraft Grounding CablePelican case with shadow boxed foam30ft Compressed Air Line
Scorpion HEPA VacNSN Desc
4130-01-507-7013 Scorpion Pneumatic HEPA Military Vac Kit4460-01-519-5158 HEPA Filter for Hornet/Scorpion
DustMaster™ Cyclonic HEPA Vacuum Sanding Kits were designed in cooperation with NAVAIR and USAF maintainers. They provide the power and features to support up to 3 simultaneous users. They offer complete tool control with a consolidated tool kit, shadow-boxed foam, and internal hose storage.
Inspection Flashlight
100X STRONGERTHAN DUCT TAPE
FIELD REPAIR KITNSN 4130-01-459-5700
WHEN FIXING IT IS THE ONLY OPTION
KIT CONTENTS:• 1" Repair Wrap Multipack (3 rolls) • 2" Repair Wrap Multipack (2 rolls) • 4" Repair Wrap (2 rolls) • 3"x3" Rigid Patch (4 patches)
• 2" Heat Wrap (2 rolls)• 1 Pair Tactical Shears• Surface Prep Abrasives• Nitrile Gloves
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019 13
Backpack Tool KitNSN Desc
4130-01-507-7017 Backpack Starter Kit Posi-Vac
BackPackNSN Desc
4130-01-460-8513 Tactical Flashlight, Multitool, Aviator Pens Kit
The Posi-Vac Backpack Tool Kit was designed as a starter kit to support corrosion control technicians. The kit includes a rugged black backpack, Leatherman multitool, white/UV inspection flashlight, safety glasses, large work gloves, and a microfiber towel, which can be used to wipe down aircraft, dry off a wet warfighter, or even as a quick blanket for those long hops on cargo aircraft. The US madebackpack is designed as a 3-day pack with soft pockets for sunglasses,and plenty of storage for tools, clothing, laptops, etc.
The Posi-Vac Essentials Tool Kit was designed as a starter kit to support corrosion control technicians. The kit includes a white/red/green inspection flashlight, Leatherman Multitool, and 2 Skilcraft B3 aviator multi-function black/red ball point pen, pencil, with non-reflective coating, and meets all FOD requirements.
BackpackMicrofiber Towel
Safety Glasses
Work Gloves
Leatherman Multitool
2 Skilcraft B3 Aviator(Black/Red Ball Point Pen, Pencil)
Nylon Sheath
An essential tool for aircraft and vehicle maintenance artisans. The Vacu-Pad Grypmat is a high-performance, flexible, non-magnetic, non-slip, chemical resistant, anti-static, rubber tool mat. The Grypmat will stay put on curved surfaces, steep angles, and rough work areas like engines. Eliminate FOD and maintain tool control while on the job. The kit includes the full size mat, the medium, and the small, all packaged in a ballistic nylon tool bag.
When fixing it is the only option! This kit contains an assortment of repair wraps for onsite fixes. Just dip the rolls of resin soaked fiber in water, then wrap around broken tools, tent poles, or anything in need of repair. Ten minutes later, it will dry hard as steel. Always be prepared!
Tool Mat Kit (Sm, Med, Lg)NSN Desc
4130-01-501-6291 Tool Mat & Tactical Bag Kit
FiberFixNSN Desc
4130-01-459-5700 FiberFix Repair Kit
Leatherman MultitoolBelt Sheath
10 Lumen
Green
70 Lumen
Red
300 Lumen
90 Lumen
300 Lumen
UV
800 Lumen
Inspection Flashlight
Hippo Reversible Liquid Drum PumpNSN Desc
4130-01-526-4627 Hippo Drum Vac Kit 55 Gal
14
Lubricator
Filter
(100) 8 x 12 wipes(4) 15 x 25
ScrubFoaming Hand WashFlashlight
Grounding Cable
PlugsCouplers Compressed Air LinesCoupler w/ Brass Union
Regulator
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
The Hippo 55 gallon drum vac kit comes complete with drum pump, hose, 55 gallon drum, and cleanup tools for liquid pickup.The heart of the system is our stainless steel air powered flow thru drum pump which can be paired with any 5, 30, 55, or 110 gallon closed head drum to create a high powered drum vac for picking up floor spills or transferring liquids. Our flow thru pump is reversible and has no moving parts. It can fill or empty a 55 gallon drum in less than 2 minutes. It’s great for recovery of hydraulic oils, coolants, and other non-combustible fluids
Vacuum gauge checks water lift to ensure that your vacuum is running at its optimal level. Pressure gauge measures PSI and is designed with a ¼” MNPT thread and a panel-mount bracket
Field Wipes Kit removes lead and heavy metals from the skin. Ideal after shooting, training, qualifying, or when cleaning weapons. Kit includes (100) 8 x 12 wipes, (4) 15 x 25 scrub, (4) bottles of no rinse foaming hand wash. Packed in a tough gear bag with flashlight.
If you’re working with toxic heavy metals like HexChrome, Nickel, Mercury, Lead Oxide, Cadmium or Zinc then you need Hexoff. The only product specifically designed to remove toxic heavy metals from the skin and other surfaces.
HexOff Decontamination SystemNSN Desc
4130-01-509-0270 Hexoff No Rinse Wipes 45 Count4130-01-459-4463 Hexoff No Rinse Wipes 500 Count4130-01-459-4448 Hexoff No Rinse Wipes 500 Count Refill4130-01-509-0265 Hexoff Decon Station (No Wipes)4130-01-509-0271 Hexoff Surface Cleaner Spray 1qt
Air lines terminate in a ½” Parker industrial interchange safety coupler and plug which is threaded on for easy removal if needed. Safety Coupler bleeds downstream air before unlocking from plug.
FittingsNSN Desc
4730-01-520-5799 Fitting Coupler 1/4in HiFlow x 1/4 MNPT4730-01-519-7442 Fitting Plug 1/4in HiFlow x 1/4in MNPT4130-01-460-2502 Coupler 1/2in FNPT Parker Safety4130-01-460-2504 Plug 1/2in FNPT4730-01-520-6072 Coupler 1/2in FNPT w/Brass Union4730-01-520-6815 Coupler 3/4in FNPT w/Brass Union4820-01-520-3609 Ball Valve 1in Brass
Diagnostic ToolsNSN Desc
4330-01-633-7988 Timer Card 12 Month Service Required9905-01-666-7153 Timer Card 6 Month Service Required6150-01-671-8172 Aircraft Grounding Wire & Plug 30ft6685-01-519-2776 Gauge Pressure 2in 0-160 PSI Panel Mount4130-01-485-6537 Extech Manometer, Digital
Field WipesNSN Desc
4130-01-458-8337 Field Wipes Decontamination Kit
1/2" Compressed Air HosesNSN Length
4130-01-460-1337 Compressed Air Hose 30ft x 1/2in Steel Fittings4720-01-663-1575 Compressed Air Hose 30ft x 1/2in SS Fittings4130-01-460-6082 Compressed Air Hose 50ft x 1/2in Steel Fittings4130-01-460-5390 Compressed Air Hose 50ft x 3/8in Steel Fittings
Compressed Air ConditioningNSN Length
4820-01-520-7106 Regulator 3/4in FNPT4130-01-459-1297 Filter Regulator 3/4in FNPT4130-01-459-1304 Filter Regulator Oiler Lubricator 3/4in FNPT
Wheeled Tote Mobile Storage Cart Hand Truck
Specifications:• Head Protection ANSI Z89.1 Type 1 Class G• Face/Eye Protection ANSI Z87.1+• Respiratory HEPA (HE) NIOSH 42CFR84• Flow Rate 8.1 CFM• Noise Level <70 dBA• Weight 4.9 lbs• Battery Duration 7 hours• Rating Class I, II, III, Div 2 Groups ABCDEFG
• Assigned Protection Factor APF 1000
30gal Garbage Bags 4 Pack Plungers
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019 15
HOW IT WORKSStep 1The bag cassette is sealed at one end with a cable tie. Once the bag” starts to fill up, you just pull it down and new material is drawn from the cassette to make the bag longer.
Longo PacNSN Grinder
4130-01-459-1300 Longopac Stand, Dispenser with One Cartridge4130-01-460-6602 Longopac Maxi Bag Refill, 5 Cartridge Pack
Longo Pac continuous bagging solutionDesigned for the safe containment of hazardous material and general refuse.
Step 2To make a new bag, pull the material down and seal it at the top with a cable tie.
Step 3Add another cable tie above the first one and cut the bag material off between the two cable ties. The entire process takes less then 30 seconds!
Storage solutions help manage tools, equipment, personal supplies and gear. This storage carts is made of rugged HDPE and designed for years of use.
StorageNSN Desc
4130-01-503-4039 Mobile Storage Cart (black)4130-01-482-5062 Mobile Tactical Tool Tote (wheeled)4130-01-460-6615 Portable Tactical Tool Tote (no wheels)3920-01-519-5811 Hand Truck
MaintenanceNSN Desc
4130-01-459-1262 Plunger 4pk8105-01-521-2119 Heavy Duty 30gal Garbage Bags, 25pk4130-01-459-1298 Heavy Duty 30gal Garbage Bags, 5pk
Respirator KitNSN Grinder
4130-01-508-5354 Respirator Hood Starter Kit4130-01-458-8330 Respirator HEPA Filters 8 PK
SAFECONVENIENTEFFICIENT
CLEAN
Features:• Filter monitor alerts when filter is saturated• Battery monitor alerts when power is low• Batteries provide 7 hours of constant use• Constant airflow prevents fogging of visor• Airflow has significant cooling effect for user• No need for fit checks• Facial hair friendly – Bring your favorite moustache• Wide field of vision• Adjustable headband• Electronic battery and filter monitor
Kit includes:• Respirator Hood Assembly• 8 Pack of Replacement Filters• 1 Storage Backpack• Visor Protector Films
• 2 Headband Assemblies• 2 Sets of Replacement Padding• 1 Set of Cleaning Wipes
The NIOSH Approved Clayton Respirator Hood by PureFlo is a game changer in PPE. This innovative system protects workers from injuries to the head, face, eyes, and respiratory system, and is ideal for work in areas where chromates, heavy metals, silica, and other hazardous dust is present. The unit is completely self-contained, with no need for belt mounted blowers or hoses to encumber the user. The battery powered filter system maintains positive pressure inside the hood, providing 8 CFM of airflow to ensure that dust and debris cannot enter the breathing zone. The constant airflow also creates a cooling effect and keeps the visor free of fog. It has a wide field of view and is perfectly balanced to reduce fatigue. Unlike conventional half and full face respirator systems, the Clayton Hood does not require respirator fit checks, and it can be used with all types of facial hair.
16
The Twin Tech Mobile WorkCenter is your complete mobile work station for industrial, automotive, marine, and aerospace sanding applications. Proudly made in the USA.
• WartHog 2-User Electric HEPA Vac• (2) 6” Pneumatic DA Sanders • (2) Air Vac Combo Hose 1” x 15’• 3” Round Vacuum Brush & 11” Crevice Tool • 7-Outlet Power Strip with Integrated Cord Wrap• Drawer Storage Bins• Pegboard Hook Sample Pack• Shadow-Boxed Tool Control Foam • Drawer Lock Bar• 6” 120G & 180G Abrasive Discs
TWIN TECH MOBILE WORKCENTER
FEATURES:Dimensions 48L x 21W x 54H
Doubled Sided Peg Board
Self Healing Work Surface
Sander & Hose Holders
Power Strip
Vacuum Base
Warthog HEPA Vacuum
Storage for Abrasives & Tools
Extended Work Surface
Lock Bar for Drawers
Twin Glide Bi-Directional Drawers
Powder Coated 14 Gauge Galvanized Steel Frame
Heavy Duty 4” Locking Casters
For Questions or Additional NSNs Call 732-363-2100 • Visit www.NSNCatalog.com for a complete list • 10/01/2019
Mobile WorkcenterNSN Desc
4130-01-531-6862 Twin Tech Mobile Work Center
Rhino Mobile Work CenterNSN Desc
4130-01-508-5341 Rhino Mobile Work Center Vac Sanding
Inside RhinoItem No Desc Qty500-400 Hornet HEPA Vac 2
671-AVHW1616-08 Air/Vac Combination Hose 8ft 2922-A08H30-EXP Compressed Air Supply Hose 2
670-12501J Clayton 5in Vacuum sander 2675-12301J Clayton 3in Vacuum sander 2
642-24V11001 Crevice Tool - Poly 1.5in x 11in 1642-24G05001 Gulper Tool - Poly 1.5in x 5in 1642-24R03001 Dust Brush - Poly 1.5in x 3in Horsehair 1
The Clayton Rhino Mobile Work Center is a full featured work center designed specifically around the needs of aerospace composite repair and LO professionals. In addition to the core tool offering included in the kit, the Rhino provides vast storage space for other tools needed on the job. Two-color foam is included to maintain compliance with tool control tech orders. The side doors swing 180˚ to support the hinged cover, revealing a spacious 10’ work surface covered in a self-healing cutting mat, surrounded by a border of cork to protect cutting tool blades.
A retractable 50’ electrical cord provides power to the Rhino internal and external electrical charging stations and allows for electrical distribution and overnight charging of battery operated tools. Charging can occur even when the kit is locked and secured.
The kit includes two portable Clayton Hornet HEPA vacuums for source capture dust collection and for FOD cleanup. It also includes vacuum sanders and accessories, and an assortment of cleanup tools.