diesel engine air intake shutoff valves - amot engine air intake shutoff valves model rds3 swing...
TRANSCRIPT
Diesel Engine Air Intake Shutoff Valves
Model RDS3 Swing Gate Valve
Overview
If flammable gas or vapor is present in the atmosphere surrounding a diesel engine, it can be ingested into the engine and become an ungoverned fuel supply. This ungoverned fuel can result in runaway engine overspeed potentially leading to dangerous mechanical failure or explosion.
The Roda Deaco RDS3 Swing Gate Valve is a positive spring actuated air intake shutoff valve that provides emergency overspeed shutdown of a diesel engine. The RDS3 Swing Gate Valve can be triggered to close which starves the engine of air and shuts down the engine.
Key Features and Benefits
lEasy to install and maintain
lLightweight, compact design
l Corrosion resistant aluminum, stainless steel and brass construction
lUsed in manual and automatic actuation systems:
- Electric
- Pneumatic
- Electric/pneumatic
- Mechanical
lWide variety of installation kits for most installations
lOption for high temperature applications
www.rodadeaco.comDS-RO-RDS3-0809-Rev3
RODADEACO by AMOT
Typical Applications
l Drilling rigs (onshore & offshore)
lDrilling support equipment
lWell servicing equipment
lRefinery support equipment
lBulk haulers and tankers
l Generator sets
l Mining equipment
lConstruction equipment
lEmergency response vehicles and equipment
lAircraft support equipment
lWork boats
l Barges
l Agriculture equipment
l Locomotives
l Rail support equipment
RDS3 - Pneumatic Actuated Valve
page 2
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
SpecificationsStandard materials: Valve body Aluminum
Gate arm Plated steel
Sealing element Floating phenolic disc
Seals Viton® standard
Pneumatic cylinder Aluminum, stainless steel and brass
Solenoid housing Plated steel
Net weights Manual actuated 7.5 lbs 3.4 kg
(incl actuator): Pneumatic actuated 7.5 lbs 3.4 kg
Standard solenoid actuated 9 lbs 4.1 kg
High temp. solenoid actuated 17.0 lbs 7.7 kg
Intake air Standard valve -40°F to 221°F -40°C to 105°C
temperature range: High temperature valve -40°F to 400°F -40°C to 204°C
XH temperature valve -2°F to 550°F -19°C to 288°C
Ambient air Standard valve -40°F to 257°F -40°C to 125°C
temperature range: High temperature valve -40°F to 350°F -40°C to 177°C
XH temperature valve -40°F to 350°F -40°C to 177°C
Electric solenoid Standard solenoid
actuation: Nominal 12 VDC power requirement 70.5 amp pull in 0.9 amp hold
Nominal 24 VDC power requirement 36.4 amp pull in 0.5 amp hold
Cycle rate 6 activations per minute
High and XH temperature solenoid
Nominal 24 VDC power requirement 42 amp @ 28.8 VDC
Cycle rate 2 activations per minute
Pneumatic cylinder Recommended pressure 90 psi - 130 psi 6.2 bar - 9.0 bar
actuation: Minimum pressure 80 psi 5.5 bar
Maximum pressure 150 psi 10.3 bar
Manual actuation: Mechanical pull to release 38 lbs 169 Newton
Operation
The Model RDS3 is a compact swing gate design air intake shutoff valve available with electric, pneumatic, or mechanical actuation. Actuation of the Model RDS3 closes the valve’s sealing element which shuts off intake air flow into the engine. The RDS3 can be used in fully automatic or manual shutdown systems.
Refer to the Roda Deaco System Selection Guide to determine the appropriate system and actuation for your application.
page 3
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
Valve Selection
The RDS3 Swing Gate Valve can be used in applications where the air intake line is 3 to 4 1/2 inches (76 - 114 mm) in diameter. The RDS3 Swing Gate Valve can be mounted in vertical or horizontal orientations and airflow through the valve can be in either direction.
When specifying the valve note the clearance requirements for the valve with the geometry of the engine and intake line for your application. Note that the valve reset handle is used only on the mechanical and pneumatic actuated valves. The reset handle is not required on the solenoid actuated valve.
To accommodate the installation requirements for the wide variety of diesel engine applications, the size and attachment types on the valve body and the valve cover are specified separately. The valve attachments are available in several styles including: hose, O-ring, V-clamp, flange, and engine specific adapters.
Valve Size
The RDS3 Swing Gate Valve is available in several standard sizes for intake air lines ranging from 3 to 4 inches (76 - 102mm) in diameter. Standard sizes for hose, V-clamp, and O-ring attachments are listed to the left. Additional sizes are available to meet specific application requirements.
Standard Attachment Sizes
3” 76 mm
3 1/4” 83 mm
3 3/8” 86 mm
3 1/2” 89 mm
3 5/8” 92 mm
3 3/4” 95 mm
4” 102mm
Front view of valve
Profile view of valve
page 4
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
Valve Selection Continued
Valve Attachment Mechanism
The hose attachment is the standard attachment mechanism. However, additional attachments are available including O-Ring, V-Clamp, Flange, and engine specific adapters. Examples are
shown below. To accommodate the installation requirements for the wide variety of diesel engine applications, the size and connection types on the valve body and the valve cover are specified separately.
Hose Attachment
Uses sections of flexible hose and band clamps to attach the valve to intake line.
V-Clamp AttachmentHeavy duty V-style ring clamp used to clamp valve to metal intake lines. Several types of V-clamp connections are available.
O-Ring AttachmentSpace saving single or dual O-Ring attachments are available. O-Rings are used to seal rigid air intake line connections.
Flange AttachmentFlange attachments on the valve are available to secure the valve to the engine.
Special AttachmentsAdditional attachments are available on request.
Standard Hose x
Standard Hose
Exterior Single O-Ring x
Exterior Single O-Ring
Dual O-Ring x
O-Ring Receiver Cup
Male V Clamp x
Female V Clamp
Interior Dual O-Ring
x Interior Dual O-Ring
Extended Depth Hose x Extended
Depth Hose
Flat Face V Clamp x
Standard Hose
Flange x Flange Interior Dual O-Ring x Flange
Female V Clamp x
Male Notched V Clamp
page 5
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
Valve Features Selection
Valve Actuation Type
Pneumatic Actuation
Electric Actuation
Mechanical Actuation
The RDS3 Diesel Engine Air Intake Shutoff Valve valve has three actuation methods: pneumatic, electric and mechanical. Please refer to the Roda Deaco System Selection Guide for complete descriptions of the systems to help determine the proper actuation required for your application.
Electric Actuation
The electrically actuated RDS3 is an energize-to-close valve. It operates using either 12 VDC or 24 VDC power. The valve will automatically reset after the engine stops and power is removed. The electrically actuated RDS3 valve is designed for use in the systems indicated below:
l Automatic Electric Overspeed RPM Detection with Manual Override
l Manual Electric System
Pneumatic Actuation
The pneumatically actuated RDS3 is designed for mechanical latching in the open position (engine run) and air pressure actuated closure. The pneumatically actuated RDS3 is reset manually.The valve is designed for use in the systems indicated below:
l Automatic Electric Overspeed RPM Detection with Pneumatic Actuation
l Manual Electric/Pneumatic System
l Manual Pneumatic System
Mechanical Actuation
The mechanically actuated RDS3 can be operated by using either a remote cable pull system or by direct operator action on the valve. The mechanically actuated RDS3 is reset manually. The valve is designed for use in the systems indicated below:
l Remote Cable Actuated System
l Direct Actuated Valve
page 6
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
Valve Features Selection Continued
The RDS3 Swing Gate Valve has three air intake temperature range options to accomodate various installation locations:
lStandard - natural aspirated or downstream of turbocharger intercooler or aftercooler where air intake line temperatures may reach up to 221°F (105°C) at the valve
lHigh - downstream of turbocharger where air intake line temperatures may reach up to 400°F (204°C) at the valve
lXHigh - downstream of turbocharger where temperatures may reach up to 550°F (288°C) at the valve
Valve Intake Air Temperature Ratings
Temperature range
Standard range -40°F to 221°F -40°C to 105°C
High temperature -40°F to 400°F -40°C to 204°C
XHigh Temperature -2°F to 550°F -19°C to 288°C
The RDS3 Swing Gate Valve has two options that can be added individually or in combination to meet the additional requirements for applications.
Pneumatic Reset
A pneumatic cylinder can be added to the valve to provide remote reset capability for pneumatically and mechanically actuated valves.
Proximity Switch
A proximity switch can be added to provide indication of the position of the swing gate disk. This is very useful in multiple valve applications such as twin intakes to provide status indication of both valves in the system to prevent operation on a single bank of cylinders in an engine.
Valve Features Options
Pneumatic Reset
Proximity Switch
proximity switchThe purchaser and end user are solely responsible for analyzing all design aspects of their application, and the selection, use, and maintenance of the switch system. This includes provisions to mitigate potential fault and failure conditions in wiring and switch. A switch system that is improperly wired, tested, or maintained can cause progressive engine damage.
page 7
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
Actuation Kits
Actuation kits are provided with each system sold. The actuation kit contains hardware required to properly install and integrate the specified shutdown system into the diesel engine application. The kits, specific for each type of system and application, can include items such as:
l Voltage control module
l Relays
l Circuit breaker
l Toggle switch
l Cable with T-handle
Installation kits are also provided with each system sold. The installation kit contains the hardware required to facilitate the installation of the Air Intake Shutoff Valve into a diesel engine air intake line. Roda Deaco has hundreds of different installation kits designed to meet specific engine model and application requirements. The kits can range from hose with clamps to custom intake pipes, elbows, flanges, brackets, etc.
Installation Kits
Double Elbow Kit Complex 3 Elbow Kit
Single Elbow Kit with Multiple Hose
Simple Hose Kits
Electric Pneumatic Actuation Kit
Manual Pneumatic Actuation Kit Manual Pull Cable Actuation Kit
Electric Actuation Kit
page 8
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
Dimensions
Electrically Actuated Valve
Pneumatically and Mechanically Actuated Valves
Clearance Dimensions
A B C D E
3.000 (76)
4.625 (117)
0.750 (19)
4.000 (102)
2.125 (54)
3.250 (83)
4.500 (114)
0.625 (16)
3.875 (98)
2.000 (51)
3.500 (89)
4.375 (111)
0.500 (13)
3.750 (95)
1.875 (48)
3.750 (95)
4.250 (108)
0.375 (10)
3.625 (92)
1.750 (44)
4.000 (102)
4.125 (105)
0.250 (6)
3.500 (89)
1.625 (41)
Clearance Dimensions
A* B C D E F
3.000 (76)
6.500 (165)
0.750 (19)
4.000 (102)
1.375 (35)
5.500 (140)
3.250 (83)
6.375 (162)
0.625 (16)
3.875 (98)
1.250 (32)
5.375 (137)
3.500 (89)
6.250 (159)
0.500 (13)
3.750 (95)
1.125 (29)
5.250 (133)
3.750 (95)
6.125 (156)
0.375 (60)
3.625 (92)
1.000 (25)
5.125 (130)
4.000 (102)
6.000 (152)
0.250 (57)
3.500 (89)
0.875 (22)
5.000 (127)
2.25 (57)
B
A
C
1.00 (25)
3.75 (95)
9.125 (232)
D
8.375 (213)
E
9.75 (248)
F
8.375 (213)
D E1.00 (25)
3.75 (95)
C
A
B
10.250 (260)
* Hose Attachment Size Inches (mm)
* Hose Attachment Size Inches (mm)
page 9
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
How to Order
Note that many engines are available in different configurations in different equipment. Some examples include: turbocharged, turbocharged with air to air intercooler, turbocharged with a liquid aftercooler on the engine, twin turbocharger arrangements and naturally aspirated engines.
Roda Deaco has a broad array of fully automatic and manual shutoff systems. The systems have sensors, switches, valves, actuation kits and hundreds of different installation kits available to facilitate installation of systems.
When ordering, please complete the Roda Deaco Ordering Information form shown on the left. The form is available electronically on the Roda Deaco web site, www.rodadeaco.com, by contacting your local representative or contacting Roda Deaco Customer Service. See the back of this datasheet for contact information.
Roda Deaco Valve ▪ 3230-97 Street ▪ Edmonton, Alberta ▪ Canada ▪ T6N 1K4
OORRDDEERRIINNGG IINNFFOORRMMAATTIIOONN SSHHEEEETT
Application Contact Billing Contact Customer Name Customer Name Customer Title Customer Title Contact Number Contact Number Fax Number Fax Number Email Email Company Name Company Name Shipping Address Billing Address
Application Information
Stationary Mobil Marine Equipment Application Quantity for this application Equipment Name Equipment Model
Engine Information
Make Model Year Serial/VIN No.
Turbocharger and Intake Air Cooling Information
Intercooler (Air to Air cooler mounted with engine radiator) No air cooling after turbocharger Aftercooler (liquid cooler in the engine) No turbocharger – the engine is natural aspirated
Air Intake Line Information:
The air intake shutoff valve is usually installed at the inlet to the engine. Please provide the air inlet line information requested below.
Number of Inlet lines Turbocharger Boost pressure Intake line air temperature (if known)
Inlet Line Material: Metal Pipe: outside diameter Rubber Hose: inside Diameter Inlet Line or Elbow Part Number:
Attachment mechanism of Air Intake Line to the inlet to the engine:
Hose Standard Extended V-Clamp Flat face Female Male NotchedO-Ring Internal External Receiver Cup Single O-ring Dual O-Ring Flange Round Square Trapezoid Other Number of Bolts Other (Please specify and include photos) Refer to the Roda Deaco System Selection Guide for information about the system listed below.
Automatic RPM Overspeed Detection and Shutdown Systems with manual Override Electronic RPM Detection with Electric Actuated Valve and
Manual Override Electronic RPM Detection with Pneumatic Acutated Valve and
Manual OverrideSystem Voltage: 12 vdc 24 vdc System Voltage: 12 vdc 24 vdc
Manual Actuated Systems and Valves Electric Actuation System Electric Switch with Pneumatic Valve
System Voltage: 12 vdc 24 vdc System Voltage: 12 vdc 24 vdc
Pneumatic SystemCable System
10 20 30 Direct Manual ValveAdditional Valve Features
Proximity Switch Valve Position Indication (Available on RDS2, RDS3, and RDS5 models)
Pneumatic Reset (Available on pneumatic and mechanical actuated valves)
Please submit this form by email or fax: Email: [email protected] Fax: (780) 469-6275
CCuussttoommeerr IInnffoorrmmaattiioonn
AApppplliiccaattiioonn IInnffoorrmmaattiioonn Please fill out this form to the best of your ability. Photos welcome
EEnnggiinnee OOvveerrssppeeeedd SSaaffeettyy SSyysstteemm IInnffoorrmmaattiioonn
page 10
Diesel Engine Air Intake Shutoff Valves - RDS3
DS-RO-RDS3-0809-Rev3 www.rodadeaco.com
E1o
Example Code RDS3 - 3500 HA 3500 HA - PC H F Code Description
Valv
e B
od
y S
ele
ctio
n
Valve Family TypeRDS3 RDS3 Swing Gate Valve
Valve Body Side Attachment Size(additional sizes available)
Body Attachment Outer Diameter Size - inches3000 3.000 3 (76 mm)3250 3.250 3 1/4 (83 mm)3375 3.375 3 3/8 (86 mm)3500 3.500 3 1/2 (89 mm)3625 3.625 3 5/8 (92 mm)3750 3.750 3 3/4 (95 mm)4000 4.000 4 (102 mm)
Valve Body Side Attachment Mechanism(additional attachments available)
Body Attachment MechanismHA Standard hose connectionIA O-Ring internal singleUA O-Ring internal dualXA O-Ring external singleLA O-Ring external dualFA O-Ring receiver femVA V-clampEA V-clamp femaleMA V-clamp male
Valve Cover Side Attachment Size (additional sizes available)
Cover Attachment Outer Diameter Size - inches3000 3.000 3 (76 mm)3250 3.250 3 1/4 (83 mm)3375 3.375 3 3/8 (86 mm)3500 3.500 3 1/2 (89 mm)3625 3.625 3 5/8 (92 mm)3750 3.750 3 3/4 (95 mm)4000 4.000 4 (102 mm)
Valve Cover Side Attachment Mechanism(additional attachments available)
Cover Attachment MechanismHA Standard hose connectionIA O-Ring internal singleUA O-Ring internal dualXA O-Ring external singleLA O-Ring external dualFA O-Ring receiver femVA V-clampEA V-clamp femaleMA V-clamp male
on
Valv
e F
eatu
re S
ele
cti
Valve Actuation Type
Actuator TypeMech M0 MechanicalPneu PC Pneumatic Air Pressure to Close
Elec E1 12 lt l id12 volt solenoidE2 24 volt solenoid
Inlet Air Line Temperature
Inlet Air TemperatureL -40ºF - 221ºF (-40ºC - 105ºC)H -40ºF - 400ºF (-40ºC - 204ºC)X -2ºF - 550ºF (-19ºC - 288ºC)
Valve Options
OptionsA No OptionsB Pneumatic Reset (Pneumatic and Mechanical Actuator)D Proximity Switch - for Air Line Temperature options L & H only
FPneumatic Reset and Proximity Switch (Pneumatic & Mechanical) - for Air Line Temperature options L & H only
Valve Model Code
The contents of this publication are presented for informational purposes. While every effort has been made to ensure their accuracy, they are not to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. The purchaser and end user are responsible for analyzing all aspects of their application and using their own judgment in the final selection, use, and maintenance of the system and components. The purchaser and end user are also responsible for assuring that all performance, safety and warning requirements of the application are met. Roda Deaco, AMOT, Roper Industries, or any of their affiliated entities assume no responsibility for the selection, use, or maintenance of any product.
www.rodadeaco.com
RODADEACO by AMOT
Europe, Middle East and Africa
Western WayBury St EdmundsSuffolk, IP33 3SZUK
Tel +44 (0) 1284 762222Fax +44 (0) 1284 760256Email [email protected]
North and South America
3230 - 97 Street Edmonton Alberta T6N 1K4 Canada Tel +1 780 465 4429 Fax +1 780 469 6275 Email [email protected] 8824 Fallbrook DrHouston TX 77064USA
Tel +1 (281) 940 1800Fax +1 (713) 559 9419Email [email protected]
Asia Pacific
Rm A308 Building A8 Jiahua Business Center808 Hongqiao RoadShanghai 200030China
Tel +86 (0) 21 6447 9708Fax +86 (0) 21 6447 9718Email [email protected]
An ISO 9001 Registered Company