differeciation list old new. 1 、 pcba pcba model no.pz186 (old)pcba model no.pz186 (new)
TRANSCRIPT
Differeciation List
Old New
1 、 PCBA
Pcba model No.PZ186 (OLD) Pcba model No.PZ186 (NEW)
2 、 ASSEMBLY
OLD :No need soldering the BT antenna New : need soldering the BT antenna
旧主板此处无蓝牙天线焊盘
新主板此处有蓝牙天线焊盘
1
New
with BT antenna connector
Old
Without BT antenna connector
2
New
With 3 component
old
Without
3 、 IMEI LABEL
Old New
SW Version 1.0.6 SW Version 2.02
4 、 carton label
Old New
旧主板软件版本为 1.06
新主板软件版本为 2.02
10/2012 11/2012
5 、 GB label
Old New
91112320-04
91112320-05
6 、 sw version in handset
Old HW
New HW
PZ286FM_KMOEB_karbonn_A1_FOREIGN_V2.0.2
PZ186FN_KMO_FOREIGN_v1.0.6
PZ186FM_KMOEB_karbonn_A1_FOREIGN_V2.0.3
Note:please make sure that the sw is correct before flash ,otherwise the TP would not working if used the incorrect sw
7 、 HW info
8 、 SW tool (important)
Dnot use this Tool (orange ),please delete it from your PC
Use this Tool (Green) only, it is along with the released SW
9,How to solve CFT issue
1,open the tool of “Factory download [FixNV(pz186 pz286)]”2,connected the mobile with SW data cable (data cable switch on);3;press the “start”;4;input the battery ;5,Done ,take out the battery ;6,Rewrite the IMEI ;6,please flash the correct sw (PZ186 or PZ286)according to the Item 6.
Note :1,the tool of “Factory download [FixNV(pz186 pz286)]” is only allowed to be used for the handset with “CFT” issue.2, the tool of “Factory download [FixNV(pz186 pz286)]” is not allowed to be used for other handsets; 3,please delete the tool of “Factory download [FixNV(pz186 pz286)]”once the issue of “CFT” solved.