digest changes and updates - 2011 - schneider...

17
1 © 2010 Schneider Electric All Rights Reserved Digest Changes and Updates - 2011 Digest 175 Sections Revised through October 2011 Click here for links to Digest 175 product line sections revised or updated since printing in March, 2009. Included are changes related to new products, revised pricing, technical corrections, and more. These sections contain the most accurate, up-to-date information available. They may also reflect new features, expanded product lines, and globalization efforts. The following sections have been updated: Digest 175 Section 1: Load Centers Section 2: Metering Section 3: Safety Switches Section 4: Power Monitoring & Control Section 5: Lighting Control and Integrated Home Systems Section 6: Surge Protective Devices Section 7: Circuit Breakers Section 8: Operator Mechanisms and Disconnect Switches Section 9: Panelboards Section 10: Integrated Power and Control Solutions (IPaCS) Equipment Section 11: Switchboards and Switchgear Section 12: Busway Section 14: Transformers Section 16: NEMA Definite Purpose Type Contactors and Starters Section 17: Motor Control Centers Section 18: IEC Contactors and Starters Section 19: Push Buttons & Operator Interface Section 20: Electronic Sensors and Machine Cabling Section 21: Limit Switches Section 22: Pressure, Vacuum, Temperature and Float Switches Section 23: Relays & Timers Section 26: AC Drives & Soft Starts Supplemental and Obsolescense Digest

Upload: others

Post on 22-Mar-2020

24 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

1© 2010 Schneider ElectricAll Rights Reserved

Digest Changes and Updates - 2011

Digest 175 Sections Revised through October 2011

Click here for links to Digest 175 product line sections revised or updated since printing in March, 2009. Included are changes related to new products, revised pricing, technical corrections, and more. These sections contain the most accurate, up-to-date information available. They may also reflect new features, expanded product lines, and globalization efforts.The following sections have been updated:

Digest 175Section 1: Load CentersSection 2: MeteringSection 3: Safety SwitchesSection 4: Power Monitoring & ControlSection 5: Lighting Control and Integrated Home SystemsSection 6: Surge Protective DevicesSection 7: Circuit BreakersSection 8: Operator Mechanisms and Disconnect SwitchesSection 9: PanelboardsSection 10: Integrated Power and Control Solutions (IPaCS) EquipmentSection 11: Switchboards and SwitchgearSection 12: BuswaySection 14: TransformersSection 16: NEMA Definite Purpose Type Contactors and StartersSection 17: Motor Control CentersSection 18: IEC Contactors and StartersSection 19: Push Buttons & Operator InterfaceSection 20: Electronic Sensors and Machine CablingSection 21: Limit SwitchesSection 22: Pressure, Vacuum, Temperature and Float SwitchesSection 23: Relays & TimersSection 26: AC Drives & Soft Starts

Supplemental and Obsolescense Digest

Page 2: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

2 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

Digest 175 Section Revision Log

Revised through March 2010

Section 1: Load Centers

Section 2: Metering

Section 3: Safety Switches

Section 4: Power Monitoring & Control

Section Number Page Number Reason for Change Specific Changes Made Change Date

1 1-3 Correction

Table 1.7: Added 2 Columns "3P Common Trip", Changed QO-EPD Verbiage to: QO-EPD/EPE QO-EPD/EPE circuit breakers provide overload and short circuit protection combined with Class B ground fault protection. They are designed to provide ground fault protection of equipment at a 30 milliamp level (EPD) or 100 milliamp level (EPE). They are not designed to protect people from electrical shock. Table 1.8: Added 4 Columns "3P Common Trip". Added footnote: See note in Instruction Bulletin when using in an enclosure with a QO403 or QON prefixOn Solid Star Footnote: added "two-wire" before "loads". In the first sentence of the footnote.

Jan-10

1 1-19 Revision Added 6 rows to Table 1.52 Aug-101 1-20 Revision Added 2 rows to Table 1.53 Aug-10

1 1-21 CorrectionRevised footnote from “Device does not meet EUSERC Specifications” to “Device configuration is not included in EUSERC standards. Consult applicable utility for acceptance”.

Jul-09

Section Number Page Number Reason for Change Specific Changes Made Change Date

2 2-9 Correction

Table 2.12: under EZ Meter-Pak–Main Circuit Breaker Applications Changed 10 kA/65 kA description to read: 400-2000A EZM Main Device with Type LH (400A Max.), MH (1000A Max.), PA (1200A Max.), RG, RJ (1600A Max.) or RJ (2000A Max.) circuit breaker. ALSO 100 kA description to read: 1600 – 2000A EZM Main Device with Type RJ (1600 – 2000A) circuit breaker.

Nov-10

2 2-10 CorrectionIn table 2.14, part no. EZM1600CBU - changed width dimension from 20.46’” to 26.19”. In table 2.14, part no. EZM1800CBU - changed width dimension from 20.46’” to 26.19”.

Mar-10

2 2-10 Correction

in header added "120/240 Vac" after 3W. Table 2.13 & 2.14: Revised entire tables. Deleted open triangle footnote.Table 2.13: changed EZM11600CB to EZM11600GCBC. Table 2.14: chagned EZM11600CBU to EZM11600GCBU

Nov-10

2 2-12 CorrectionIn table 2.19, part no. EZM3600CBU - changed width dimension from 20.46’” to 26.19”. In table 2.19, part no. EZM3800CBU - changed width dimension from 20.46’” to 26.19”.

Mar-10

2 2-12 CorrectionIn header added "208Y/120Vac or 240/120Vac Delta" before EZ. Table 2.18 & 2.19: Revised entire tables. Deleted open triangle footnote.Table 2.18: changed EZM31600GCB to EZM31600GCBC

Nov-10

2 2-16 Correction

Table 2.27: Revised dimensions, deleted: EZM11600CB 61.19 x 30.19 x 18.33 EZM31600CB 61.19 x 30.19 x 18.33 EZM11600CBU 69.69 x 27.69 x 18.45 EZM31600CBU 69.69 x 27.69 x 18.45 , then added: EZM11600G/JCBC 68.70 x 30.19 x 18.33EZM31600G/JCBC 68.70 x 30.19 x 18.33EZM11600G/JCBU 68.70 x 30.19 x 18.33EZM31600G/JCBU 68.70 x 30.19 x 18.33

Nov-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

3 3-1 Correction Under Heavy Duty; Standards, 2nd line: changed E154282 to E154828 Jan-103 3-1 Addition Added section for 1000Vdc Photovoltaic Heavy Duty Disconnect Switches Mar-113 3-1 Revision Added section for Photovoltaic Switces Feb-11

3 3-7 product additionIn table 3.13, under Fusible products, added part numbers and values for H365SS and H366SS; Under Non-fusible, added part numbers and values for HU365SS and HU366SS.

Jun-09

3 3-7 Correction Table 3.16: Removed open square symbol next to Cat. No & added solid diamond symbol next to Enclosed Molded Case Switch. Jan-10

3 3-7 Obsolete Table 3.16: removed last row from table & deleted open square footnote. Nov-103 3-7 Correction Table 3.16: deleted last row of table & last footnote. Feb-11

3 3-7 CorrectionTable 3.16: deleted last row of table & last footnote. 2nd Version: added 2 rows to Table 3.16 and corresponding footnote. Removed black diamond & star footnotes as well.

Mar-11

3 3-11 Correction Table 3.23: revised pricing. Nov-103 3-12 addition to table, pricing Expanded Price adder Table to include 800A and 1200A prices. Jun-09

3 3-12 Correction

Deleted 2nd sentence under Special Paint header. Added: To order safety colored switches add suffixes as noted in Table x.xx to the standard switch commercial reference number. Also added corresponding table. Under Minimum quantity, changed to read: Not available for NEMA Type 7/9 or stainless steel products.

Feb-11

3 3-13 change In paragraph under title Lock-On Provisions, changed first word from “Lock-on” to “Lock-off”. Jun-09

3 3-14 revisions Revised Series and Dimension columns “W” and “D” multiple places. Jun-093 3-23 New Page Photovoltaic Switches Feb-11

3 3-23 Corrections

a 1st paragraph: deleted "and UL98 listed Photovoltaic Enclosed Switch" from the end of the last sentence. Table 3.49: deleted Terminal Blocks Columns. Added Terminal Block drawing to 3 Pole Grounded System. Deleted Diamond footnote & added footnote reading: "Terminal blocks standard with 3 pole switches; accommodates (2) 1/0 max Al/Cu or (2) 6 max Al/Cu wiring. Removed windows from drawings at bottom of page. Changed Class No. from 3140 to 3110. Changed text in footnote 4 to read: Required when adding surge arrestors. Accommodates (2) 6-300 Cu/Al wiring; One lug for the line connection and one for the surge arrestor connection. Order AL20DTF for field installable kit $159.00. Added Discount Schedule DE1 to bottom of page.

Mar-11

Section Number Page Number Reason for

Change Specific Changes Made Change Date

4 4-28 correction Revised values in Tables 4.41 and 4.42. Revised 2nd footnote under table 4.42. Jul-09

Page 3: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

3

www.schneider-electric.us

Section 5: Lighting Control and Integrated Home Systems

4 4-30 correction Revised values in Tables 4.43, 4.44 and 4.45. Replaced drawing at bottom of page. Revised 2nd footnote under table 4.44. Jul-09

4 4-30 correction

Changed Ambient Temp from 46 to 40, Changed Average Temp Limit from 45 to 40 & 35 to 30. Changed Withstand test level: to Dielectric withstand test level: 2nd REVISIONS: Changed photo & caption, added (AV5000 shown here) to the end of the photo cutline. Under Application Assistance: Changed "Quality Correction Group provides" to Quality Correction Experts provide. 3rd from the last bullet: deleted and NEMA 3R outdoor. Enclosure rating: Deleted N3R available.

Aug-10

4 4-31 correction

Changed Ambient Temp from 46 to 40, Changed Average Temp Limit from 45 to 40 & 35 to 30. Changed Withstand test level: to Dielectric withstand test level: 2nd REVISIONS: Changed photo. Under Application Assistance: Changed "Quality Correction Group provides" to Quality Correction Experts provide. Enclosure rating: Deleted N3R available.

Aug-10

4 4-32 correction Changed Ambient Temp from 46 to 40, Changed Average Temp Limit from 45 to 40 & 35 to 30. Changed Withstand test level: to Dielectric withstand test level: Aug-10

4 4-35 Revision/PricingIn paragraph “Accusine PCS Sizing”, changed contact information. In table 4.47, Completely revised table including part no. changes and pricing. Dimensions were also revised.

Mar-10

4 4-35 Correction

Replaced photos. Table 4.47 Removed the following Catalog Nos.: PCS050D5N15S, PCS050D5N16S, PCS050D5N125SC, PCS050D5N126SD, PCS100D5N15S, PCS100D5N16S, PCS100D5N125SC, PCS100D5N126SD, PCS300D5N15S, PCS300D5N16S, PCS300D5N125SC, PCS300D5N126SD. Changed: Frequency from 50 to 50/60 for ALL catalog Nos. Change Cat No: PCS050D5CE305SC to PCS050D5CE30D, PCS050D5CE545SC to PCS050D5CE54D, PCS050D5IP305SC to PCS050D5IP30D, PCS050D5IP545SC to PCS050D5IP54D, PCS300D5CE305SC to PCS300D5CE30D, PCS300D5CE545SC to PCS300D5CE54D, PCS300D5IP305SC to PCS300D5IP30D, PCS300D5IP545SC to PCS300D5IP54D.Under Power Factor Correction header: Removed the 2nd sentence : In addition, AccuSine PCS……….

Jan-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

5 5-1 correction

Changed SqD Logo/web at top of page to Schneider Electric. Removed All NEW! Product indicators. Changed Clipsal to C-Bus. Added Decorator Keypads after DLT Keypads. Added C-Bus RF Wireless Controls after Software. Removed Square D from Structured Wiring System Header. Removed Square D logo. Changed Structured Wiring System to: Square D® Structured Wiring System. Moved C-Bus Decorator Keypads & C-Bus Wireless Controls to bottom of page.

Oct-09

5-1 Revision Rearranged Table of contents Aug-10

5 5-2 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Square D to Schneider Electric. Changed Clipsal to C-Bus. Oct-09

5 5-2 Revision Changed Matrix Switcher Photo to black one. Aug-10

5 5-3 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Square D Occupancy Sensors to Schneider Electric Occupancy Sensors. Oct-09

55 5-3 Revision Added Wiser Photo

5 5-4 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. 1st pgrph: deleted Clipsal to just read Neo Keypads. Oct-09

5-4 Revision

Changed 2nd Bullet to read: Scene control includes up to forty group addresses per keypad. Larger scenes are possible by sharing memory among multiple keypads. Added to the end of the 7th bullet: ..or help the installer find the correct keypad when commissioning

Aug-10

5 5-5 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. 1st pgrph: deleted Clipsal to just read Saturn Keypads. Oct-09

5 5-5 Correction Changed 2nd Bullet to read: Scene control includes up to forty group addresses per keypad. Larger scenes are possible by sharing memory among multiple keypads. Aug-10

5 5-6 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. 1st pgrph: deleted Clipsal to just read Saturn Dynamic… Oct-09

5 5-6 Revision Changed 3rd Bullet to read: Scene control includes up to forty group addresses per keypad. Larger scenes are possible by sharing memory among multiple keypads Aug-10

5 5-7 correctionChanged SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. 1st pgrph: changed Clipsal Touch screens to C-Bus Touch screens. Deleted New! Icon on Mark II touch screen.

Oct-09

5 5-7 Revision

Changed Mark II to Mark II Monochrome on photo captions & headers. In 3rd bullet added to the end ...through the built in Logic Engine. Added bullet at the end of Mark II Monochrome touch screen that says: Stores up to 250 scenes with 100 group addresses each. Scenes can be triggered directly from the touch screen or any other device on C-Bus

Aug-10

5 5-8 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 6 instances. Oct-09

5 5-8 Correction Last paragraph: changed seven to six. Changed Matrix Switcher photo to black one. Aug-10

5 5-9 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 10 instances. Oct-09

5 5-9 Correction

Changed Matrix Switcher photo to black one. Completely replaced Matrix Switcher text. Clipsal Table: Changed the Matrix Switcher row from 1 entry to 2. 2nd REVISIONS: (now page 5-11) added TBD in price column on Table 5.13, first 2 entries.

Aug-10

5 5-10 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 3 instances. Oct-09

5 5-11 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 2 instances. Oct-09

5 5-11 RevisionAdded Title to Table 5.12: Single and 4 Zone Network Thermostats. Added row to bottom of table: SLC5031RDTSL Remote Temperature Sensor 2nd REVISIONS: (now page 5-13) added price $298.00 to Cat No SLC5031RDTSL

Aug-10

5 5-12 correctionChanged SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 7 instances. Table 5.13: changed 150fc, Indoor to 150 Foot-candles, Indoor& changed 150fc, Outdoor to 150 Foot-candles, Outdoor

Oct-09

5 5-12 Correction Under Light Level Sensor Header: changed ...ambient lighting levels to ...ambient lighting targets. Aug-10

5 5-13 correctionChanged SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 1 instance. Changed Various to various in General Input Unit paragraph.

Oct-09

Section Number Page Number Reason for

Change Specific Changes Made Change Date

Page 4: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

4 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

5 5-14 correction

Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 4 instances. Added photo, caption, info & table about the 8-Channel Low Voltage Relay.. Changed 8-Channel text to the following: The C-Bus 8-Channel Low Voltage Relay is a C-Bus output device that controls up to eight low voltage relay channels. The unit is powered from C-Bus and requires no other power source. The 8-Channel Low Voltage Relay can be used in many low voltage applications including controlling irrigation solenoids and low voltage damper solenoids for HVAC control. The unit can also be used in integrating 3rd party equipment through pulse signal controls.

• 8 channels of 2A switched loads @ 30Vac/dc• 8 channels are all isolated change over relays• Control of 3rd party products

Oct-09

5 5-15 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 4 instances. Oct-09

5 5-15 Revision Table 5.20: changed header from C-Bus Four Channel and Pro Dimmers TO: C-Bus Dimmers Aug-10

5 5-16 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 9 instances. Oct-09

5 5-17 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 11 instances. Oct-09

5 5-18 correction

Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 20 instances. Under 12M Enclosure last bullet: Changed 4M Clipsal to 4M C-bus. Under 36M and 36MS Enclosure 1st sentence, changed Various to various

Oct-09

5 5-19 correction Changed SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 4 instances. Oct-09

5 5-20 correctionChanged SqD Logo/web at top of page to Schneider Electric. Changed Clipsal header to C-Bus. Clipsal to C-Bus in 1 instance. Under HomeGate paragraph removed Clipsal in 1st sentence.

Oct-09

5 5-20 Revision

Under C-Bus Toolkit Software header, changed website in note to: http://www.schneider-electric.us/solutions/lighting-and-whole-home-control/ Under Schedule Plus Software V.4 Header, changed website note to An evaluation version of Schedule Plus is available for download by going to http://www.schneider-electric.us/solutions/lighting-and-whole-home-control/ and clicking Software Downloads in the far-left column. Under HomeGate Software V.4 header, changed website note to An evaluation version of Schedule Plus is available for download by going to http://www.schneider-electric.us/solutions/lighting-and-whole-home-control/ and clicking Software Downloads in the far-left column.

Aug-10

5 5-21 correction

Changed SqD Logo/web at top of page to Schneider Electric. Removed Square D® from Basic Wall Switch Occupancy Sensors heading, Commercial Grade Wall Switch Occupancy Sensors heading, & Residential Wall Switch Vacancy Sensors heading. Under Adaptive Technology: Changed Square D adaptive sensors TO: Adaptive Sensors from Schneider Electric, Under Residentail Wall Switch Vacancy Sensors, Changed Square D Residential Vacancy Sensors TO: The Residential Vacancy Sensors. Changed: The Square D Vacancy Sensor operates....TO: Vacancy Sensors from Schneider Electric operate

Oct-09

5 5-21 Revision Removed "New" icon from the Commercial Grade Wall Switch photo. Aug-10

5 5-22 correction

Changed SqD Logo/web at top of page to Schneider Electric. Removed Square D from Wall Mount Occupancy Sensors heading. Changed Square D Wall Mount Occupancy Sensors... TO: Wall Mount Occupancy Sensors from Schneider Electric….. Removed Square D from Ceiling Mount Occupancy Sensors heading.

Oct-09

5 5-22 Revision

Table 5.27 Wall Mount and Celing Mount Sensors….Split in to two Tables: Wall Mount Occupancy Sensors & Ceiling Mount Occupancy Sensors. ALSO added two rows to the new Celing Mount Table NEED PRICES. Tables will be renumbered from this point on. 2nd REVISIONS: (now page 5-25) added prices 129.54 & 141.76 to SLSCUS800 & SLSCDS800 respectively.

Aug-10

5 5-23 correction

Changed SqD Logo/web at top of page to Schneider Electric. Removed NEW! Icon from Indoor Occupancy Sensor photo. Removed Square D Fixture Mounted Sensors and Controls header. Changed Square D extends… TO Schneider Electric extends…

Oct-09

5 5-24 correction Changed SqD Logo/web at top of page to Schneider Electric. Removed NEW! Icon from BACnet Capability heading. Oct-09

5 5-24 Revision 4th paragraph, 2nd sentence. Changed PCS to Powerlink. Aug-105 5-25 correction Changed SqD Logo/web at top of page to Schneider Electric. Oct-09

5 5-25 CorrectionTable 5.32: Change Two-Pole header from: 240Vac – 65,000AIR to: 120/240Vac – 65,000 AIR240Vac -14,000AIR Ground B Phase. Table 5:40 added 2 rows & footnote.

Aug-10

5 5-26 correction

Changed SqD Logo/web at top of page to Schneider Electric. Under Device Power Supply heading: Added TM symbol to first appearance of C-Bus. Changed ….passive Clipsal devices TO: …passive C-Bus devices. Removed Clipsal twice in last sentence. Under Device Router heading: changed Clipsal to C-Bus in 5 instances. Under Device Router changed: C-BuslPower Supply TO: C-Bus Power Supply

Oct-09

5 5-27 correction Changed SqD Logo/web at top of page to Schneider Electric. Oct-095 5-28 correction Page Renumbered because of added pages. Oct-09

5 5-29 New Page Added

Under Neo™ Decorator Keypads changed Clipsal to C-Bus. Table 5.52: Changed SLC5050GA(XX) to SLC5850BP(XX). Replaced Neo Decorator Style Cover Plate photo. Removed ™ symbol from Neo in 2 places & Saturn in 2 places. Changed last photo caption on the page to read: 2 Gang Saturn Decorator Style Cover Plate.

Oct-09

5 5-30 New Page Added

Changed New RF Wireless Keypad photo. Changed 3rd bullet to read: Use as a stand-alone system, or connect to C-Bus wired systems for controlling third party sub-systems, security access controls, sprinklers and more. Under Switches & 600W adn 1000W RF Dimmers & Scene Controllers, 2nd to last bullet points, changed remote to: RF remote. Under Plug Adaptors: changed 2A to 8A in 2 places & added plug adaptor photo. Added Gateway photo,Changed Discount Schedule to DE-8.

Oct-09

5 5-31 New Page Added

Added Remote Control Photo. Under RF Remote Control, 5th bullet point: Changed w/button indicator TO: w/indicator. Table 5.56, Added footnote: Wallplates sold seperately. Was asked to fix indent in last 3 categories in table, but the correct style sheet PCN is centered text. The others look flush left because they are the same length, but they are centered as well. Changed Cat. No. SLC5812R10F1UD to SLC5812R8FUM. Cat. No. SLC5800WCGD: added Description: Wireless Gateway. Cat. No. SLC5888TXBD: added Description: RF Remote. Changed Discount Schedule to DE-8.

Oct-09

5 5-31 Revision Table 5.56: Asked to ad (ORDER COVER PLAGE SEPARATELY) NOTE…..then decided not to because there was a footnote already in place. Aug-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

Page 5: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

5

www.schneider-electric.usSection 6: Surge Protective DevicesSection Number Page Number Reason for Change Specific Changes Made Change Date

6 6-1 Correction

Changed Non-Modular to Brick Assembly. Deleted High Resistance Ground (HRG) External SPD). Deleted DIN Rail Mounted Multi 9 header & row. Under Nipple Mounted Device headings: Row 1: changed Non-Modular, Nipple Mounted Device to: Surge Protective Devices. Deleted XW Series row. XR Series row: changed Surge Protective Device to: Devices. Deleted LC Series row. Changed Secondary Surge Arrestors to: SDSA1175 Series Nipple Mounted Devices. Added row for: SDSA3650 Series Nipple Mounted Devices. Changed Mounting Brackets to Mounting Brackets and Flush Mount Kits. Under Residential Surge Protective Devices Header: Row 1: Deleted Surgebreaker. Deleted Row 2. Row 3: Changed Surgebreaker to Whole House. Row 4: Changed Panelboard to Loadcenter & Arresters to Suppressors. Changed Photos & captions for Surgebreaker Plus, QO/HOM Surge Arresters, SDSA Hard Wired, LC Surge Suppressor, XR Surge Suppressor.Deleted Surgelogic from Surgelogic OEM/Assembler Kit. Deleged Plus from Whole House Plus Accessories. Changed Surge Suppressors to SPDs in last entry on page.Last entry: Deleted Surge.

Nov-10

6 6-2 Correction

Under Heading "Externally Mounted Surge Protective Devices" Changed….provide protection against surges from…. TO ….provide surge suppression for… 2nd paragraph, same header….deleted Second Edition rev. 2/9/2007 & effective 9/29/2009. Changed 2nd & 3r bullets: Standard product production modes changed to: Modes of protection:. Changed SSCR to SCCR. Under Modular External SPD header, changed Modularity protection to Modularity surge suppression. Duplicated Option Table under Table 6.1. Changed Non-Modular External SPD header to: Brick Assembly External SPD. Deleted Non-modular in 1st paragraph under corresponding header. Deleted High Resistance Ground (HRG) Modular External SPD header, paragraph & Table 6.4. Moved Option Descriptions header & paragraph under its corresponding table.1st Paragraph: changed offer the world's finest array of TO: offers high performance. 2nd Paragraph: changed for service TO: from service, deleted "down" & changed point of use TO: point-of-use. Changed the UL listed paragraph to say: US and Canadian UL Listed® to UL 1449 3rd Edition and UL 1283 5th Edition. Complies with requirements of NEC® Article 285 and CSA 22.2 No. 8-M1986 as appropriate. BULLET POINTS: CHanged 2nd one to: Suppression modes: L-N, L-G, L-L, and N-G. 3rd one: deleted Standard internal 200 kA AIC surge rated fusing, ADDED bullet: EMI/RFI filtering. Table 6.1: Changed NEMA 1/3R/12 to: NEMA 1/3R. Options table under table 6.1: changed price 492.00 to 738.00. Brick Assembly Paragraph: changed "brick" to brick, AND great protection to: superior surge suppression. Table 6.2: changed NEMA 1/3R/12 to: NEMA 1/3R. Options table under table 6.2: changed price 492.00 to 738.00. Under 10 Mode header: Changed 10-Mode to 10 Mode. BULLETS: Deleted Standard internal 200 kA IC fault rated fusing,. Table 6.3: Changed NEMA 1/3R/12 TO: NEMA 1/3R, changed 1st price: 6927.00 to: 10010. Deleted last 4 rows of the table. Options table under table 6.3: changed price 800.00 to 750.00. 1st sentence: Changed offers TO: offer. Added Bullet: EMI/RFI filtering. Under Brick Assembly Header: Changed protection TO: suppression.

Nov-10

6 6-3 Correction

Removed: Table 6.9 & corresponding photo.Under Header Replacement Modules: Added: All modules and brick assemblies are US and Canadian UL Recognized® to UL 1449 3rd Edition and UL 1283 5th Edition. Complies with requirements of NEC® Article 285 and CSA C22.2 No. 8-M1986 as appropriate. Table 6.5: Changed ALL prices. Table 6.7: removed last 4 rows.

Nov-10

6 6-4 Correction

1st paragraph: changed "protection against damaging surges" to "surge suppression". Changed "No SPDs in the industry that can" to "External SPDS cannot compete". Under Header "Internally Mounted-New Construction" changed protection to suppression. changed TVSS to Surgelogic. Table 6.10 in Surge Current Rating Column: Changed Cat no prefix FC to HL in entire column.1st paragraph: added: US and Canadian UL Recognized® to UL 1449 3rd Edition and UL 1283 5th Edition. Complies with requirements of NEC® Article 285 and CSA C22.2 No. 8-M1986 as appropriate. CHANGED "Surge protective devices...." to "Internally mounted surge protective devices are installed integrally to systems...." Changed SPDS to SPDs. 2nd paragraph: added ® to Surgelogic. Under Internally Mounted header: changed surge protection to surge suppression. BULLETS: deleted 1st one, changed 3rd & 4th to read: 200 kA SCCR & Indicator LEDs respectively. Table 6.8: changed ALL prices & changed Cat no in Busway Units column. Added ® to photo captions at bottom of page & swapped out b/w photos for color ones.Switched 1st 2 paragraphs.

Nov-10

6 6-4 Price Change Table 6.8: Changed several prices. Feb-11

6 6-5 Correction

1st paragraph: changed protection to suppression. Deleted DIN Rail Mounted info, chart & photo. Moved HWA Series onto this page.Main page header: Changed DIN Rail Mounted Multi 9 TO: Surgelogic. Replaced OME Kit photo. Deleted Surgelogic in 1st paragraph header. Changed UL 1449 Recognized TO: US and Canadian UL Recognized® to UL 1449 3rd Edition and UL 1283 5th Edition. Complies with requirements of NEC® Article 285 and CSA 22.2 No. 8-M1986 as appropriate. Under HWA Series Header: deleted non-modular, changed protective devices TO: suppressors, AND changed NEMA 4 to: NEMA 4X. cULus paragraph changed to: US and Canadian UL Listed® to UL 1449 3rd Edition and UL 1283 5th Edition. Complies with requirements of NEC® Article 285 and CSA C22.2 No. 8-M1986 as appropriate. ADDED 3 Bullet Points: * EMI/RFI filtering * LEDs indicate operational status * 200 kA SCCR. Added space between Table 6.9 and Nipple Mounted Header. Changed photo caption "Type HWA" TO: HWA Series.

Nov-10

Page 6: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

6 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

Section 7: Circuit Breakers

6 6-6 Correction

Moved HWA Series infon to Page 6-5 with the following changes: Added Main Head Nipple Mounted Surge Protective Devices. Deleted Non-Modular from head. Altered 1st paragraph. In 2nd paragraph Deleted Second Edition rev. 2/9/2007 & effective 9/29/2009. Added a bullet point: Optional flush mount kit TVSHWAFMK. In table 6.13: deleted Non-Modular in table title. All new info for Table 6.13. Deleted XW Series Information. in XR Series header: Deleted Nipple-Mounted, added Type 1. Paragraph 1: changed protection to suppression. Changed 2nd paragraph to read: Listed to UL 1449 (Third Edition), CSA 22.2 No. 8-M1986. Bullets: deleted 1st one, changed 3rd to: Optional flush mount kit TVSXRFMK. 4th bullet: deleted back or & locations available. Replaced Table 6.15 completely. Replaced Type XR PhotoMain page header: changed Secondary Surge Arresters TO: Nipple Mounted, Type 1 SPDS. 1st paragraph: after primarily added "used", changed of irritation TO: for irrigation. Under SDSA1175 header: changed paragraph: Secondary Surge Arrester TO: SPD, protection of TO: suppression for, Secondary Surge Arrestors TO: surge protection devices, protection on TO: suppression for. Changed UL Listed sentence TO: US and Canadian UL Listed® to UL 1449 3rd Edition. Complies with requirements of NEC® Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate. Table 6.11: header changed TO: SDSA1175 Series Surge Protective Devices. & price from 61.00 to 92.00. added ® to QO in footnote. BULLETS: moved above table, added 3: * Suitable for indoor and outdoor applications (NEMA 4X housing) * Convenient back nipple mounting * Short circuit current rating 22 kA. Changed Type XR photo caption TO: XR Series. Under XR Series header: "unitalicized" the last few words of the paragraph. UL Listed sentence changed TO: US and Canadian UL Listed® to UL 1449 3rd Edition. Complies with requirements of NEC® Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate. BULLETS: changed 25 to 22, 2nd bullet changed to: Suitable for indoor and outdoor applications (NEMA 4X housing). ADDED bullet: LEDs indicate operational status. Table 6.12: changed last 2 cat nos TO: TVS120XR100S & TVS120XR120S. Under SDSA3650 header: changed Secondary Surge Arrester TO: SPD, protection of TO: suppression for, and TO: The SDSA3650 series is... AND protection TO: suppression. UL Listed sentence changed TO: US and Canadian UL Listed® to UL 1449 3rd Edition. Complies with requirements of NEC® Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate. BULLETS: 2nd one, changed LED indicates TO: LEDs indicate & added 2 bullets: * Convenient back nipple mounting * Short circuit current rating 22 kA. Table 6.13: header changed TO: SDSA3650 Series Surge Protective Devices & changed table contents. Added ® to QO in footnote. Mounting Brackets for Nipple-Mounted Devices TO: Mounting Brackets and Flush Mount Kits. In paragraph changed: SPD protection TO: surge suppression, (below) is TO: and flush-mount kits are, & deleted inside enclosures. Table 6.14: changed 1st row TO: Mounts to QO® and Homeline® load centers and other enclosures & price from 7.60 TO: 11.40. ADDED 2 rows to the table. Last Bullet Under SDSA3650: changed 22 to 200. Table 6.13: added Peak Surge Column, added square footnote symbol to end of Cat No SDSA3650D, moved diamond footnote symbol to end of first row, first column.

Nov-10

6 6-7 Correction

ALL INFO MOVED FORWARD TO PAGE 6-6. Deleted LC Series Info. Changed Secondary Surge Arrestors header to: Nipple Mounted, Type 1 Surge Protective Devices. Changed 1st paragraph. Changed Hard-Wired Secondary Surge Arrestors header TO: SDSA1175 Series Type 1 Surge Protective Devices. Added the sub-header of "SDSA3650 Series Type 1 Surge Protective Devices" before the next paragraph. Changed 3rd paragraph to read: Listed to UL (Third Edition). Deleted last 2 bullets. Added XR Series info between SDSA1175 & SDSA3650 info. Duplicated UL info & bullets from SDSA1175 under SDSA3650 info. Replaced SDSA1175 & SDSA3650 photos.Main page header: Changed TO: Residential SPDs. 1st paragraph: your changed TO: the (2 places). UL sentence changed TO: US and Canadian UL Listed® to UL 1449 3rd Edition. Complies with requirements of NEC® Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate. Telephone and coaxial video modules US and Canadian UL Recognized® to UL 497A 4th Edition and UL 497B 4th Edition. BULLETS: 1) 80 kA per phase AC line suppression for single-phase, three-wire 120/240 Vac applications. 2) Two-line telephone module with tool-less... 3) Two-line coaxial modules 4) LED status indicators for AC surge suppression AND deleted last 2 bullets. ADDED New! icon back on to photo of SDSB1175R. Table 6.15: header changed TO: Whole House Surge Protective Devices. Row 1 changed TO: Whole House NEMA 1 Surge Protective Device & price from 420.00 TO: 630.00. ROW 2: Whole House NEMA 3R Surge Protective Device & price from 491.00 TO: 737.00. Paragraph under Whole House Accessories: ADDED: US and Canadian UL Recognized® to UL 497A 4th Edition and UL 497B 4th Edition. Changed protection TO: surge suppression, AND added a space between House & products. Table 6.16: change ROW 1 to read: 4-Line telephone surge suppressor with tool-less IDC terminations & price from 67.00 TO: 101.00. ROW 2: price changed from 60.00 TO: 90.00. Changed QO, NQ header TO: QO®, NW, and Homeline®, Load Center Surge Protective Devices. 1st sentence: added ® to Square D, changed loadcenter TO: load center, changed surge suppressors TO: devices. Added ® to QO & Homeline. UL Listed sentence changed TO: US and Canadian UL Listed® to UL 1449 3rd Edition. Complies with requirements of NEC® Article 285, CSA 233.1-87, and CSA C22.2 No. 8-M1986 as appropriate. BULLETS: 1) changed and TO: , added and in front of NQ. 5th) deleted AC protection. Table 6.17 header: Added ® to QO & Homeline. ROW 1: added ® to QO & deleted next 2 lines & changed price from 106.00 TO: 159.00. ROW 2: added ® to Homeline & deleted next 2 lines & changed price from 106.00 TO: 159.00. BULLETS: 2nd one: changed Two-line to Four-line. Replaced photo for SDSA2V. Under Whole House Accessories header: swapped 1st 2 sentences.

Nov-10

6 6-8 Correction

ALL INFO MOVED FORWARD TO PAGE 6-7. PAGE 6-8 is NOW BLANK. Added main header at the top of page: Residential Surge Protective Devices. In subhead: delted Surgebreaker Plus & added s on end to make it Devices. Altered 1st paragraph. 2nd paragraph: deleted Second Edition rev. 2/9/2007 & effective 9/29/2009. Bullets: 2nd one, changed protection standard to module, 3rd: changed protection for CATV standard to modules. 4th: added AC surge suppression after LED. 5th: changed protector to surge suppressor module. 6th: changed protector (CATV or Satellite) to: surge suppression module. Table 6.19: changed Table header to: Devices. Changed descriptions to Whole House. Replaced SDSB1175C & SDSB1175R photos. Deleted Surgebreaker Plus Low-Voltage Only Surge Protective Device info/photos/table. Deleted SDSA1AC photo. Changed Surgebreaker Plus Accessories header to: Whole House Accessories. 1st paragraph under header: changed "any of the three Surgebreaker Plus" to Whole House. Table 6.21: Row 1, changed Protector to Surge Suppressor. Row 2 changed to "Coaxial video surge suppressor". Deleted 3rd row. Main Header QO, NQ, and Homeline.....changed Panelboard to Loadcenter & Device to Devices. Changed 1st & 2nd paragraphs. Replaced photos for QO2175SB & HOM2175SB.

Nov-10

Section Number Page Number Reason for

Change Specific Changes Made Change Date

7 7-2 Correction

Changed Last column headers to read: QO-EPD QO-EPE and QOB-EPD QOB-EPE. Added column for 3 Poles under QO-GFI and QO-EPD QO-EPE. Under Interrupting Ratings added a row for 208Y/120. Added 10 for the interrupting Rating for QO-GFI and QO-EPD QO-EPE columns. Duplicated accessory info from 2 pole columns to 3 pole columns for QO-GFI and QO-EPD QO-EPE.

Jan-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

Page 7: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

7

www.schneider-electric.us

7 7-4 Correction HACR ROW: Added X's to 4 columns. Feb-11

7 7-11 Correction

Table 7.7: Added 2 Columns "3P Common Trip", Changed QO-EPD Verbiage to: QO-EPD/EPE QO-EPD/EPE circuit breakers provide overload and short circuit protection combined with Class B ground fault protection. They are designed to provide ground fault protection of equipment at a 30 milliamp level (EPD) or 100 milliamp level (EPE). They are not designed to protect people from electrical shock. Table 7.8: Added 4 Columns "3P Common Trip". Added footnote: See note in Instruction Bulletin when using in an enclosure with a QO403 or QON prefix. Added 3 Pole Photo & cutline: #P QO-GFISolid Star footnote: Added two-wire in front of loads.

Jan-10

7 7-12 Correction

Table 7/14: Changed GFI2PA verbiage to read:For padlocking 2P and 3P QO-GFI, QO-EPD, and QO-EPE in either ON or OFF position, fixed attachment. Changed QOGFI2PAF verbiage to read:For padlocking 2P and 3P QO-GFI, QO-EPD, and QO-EPE circuit breakers in OFF position only, fixed attachment.

Jan-10

7 7-16 New Table 7.27: Deleted Box Lug/Ring Tongue section from table. Nov-10

7 7-22 New

Added: "2P HJ, HL in 3P module" to the end of the first photo caption. Table 7.37: Changed Table Caption to: H-Frame 150 A and J-Frame 250 A Thermal-Magnetic UL Current-Limiting* Circuit Breakers (600 etc…..) and added corresponding footnote at bottom: 100% rated J frame breakers have copper lugs and can only be used with copper wire.TABLE 7.37: Changed footnote marker after the word Limiting. Then added the same footnote marker after the column headings for "J" and "L" in the top part of the table and the bottom part of the table. Then add footnote: "J and L interrupts are UL certified as current limiting." below in footnotes.

Nov-10

7 7-23 CorrectionTable 7.40, 7.41 & 7.42: added UL before Current, then corresponding footnote symbol after Limiting AND in J Interrupting & L interrupting in all 3 tables. Added corresponding footnote: "J and L interrupts are UL Certified as current limiting." at bottom of Table 7.42.

Nov-10

7 7-24 Correction Removed Tables 7.46 and 7.47 along with the GJL photo. Feb-11

7 7-25 Correction Table 7.51 & 7.52: Updated pricing. Table 7.55: under L Interrupting Rating: Changed 150 kA to 125 kA Nov-10

7 7-27 Correction Revised 1600A part no.R( )36080(C)U43A to R( )36160(C)U43A. Aug-10

7 7-33 Correction Table 7.72: corrected catalog numbers. Table 7.73: Deleted "D" from the Table Caption. Added D-Frame Withstand Ratings Table. Removed Table 7.74 & 2 corresponding photos. Nov-10

7 7-34 CorrectionON DC CAUTION LABEL: Removed short vertical line below horizontal line going to box and added + sign above vertical line. Table 7.75: Removed the 6 KHL-DC breakers.In DC caution label: added vertical line.

Nov-10

7 7-35 Correction Table 7.77: Changed Cat. No. AL250LA to AL250LAMC & its wire range from (1) 4 AWG-350 kcmil Al to (1) 250-350 kcmil Al. Added D Frame Mission Critical info. Nov-10

7 7-35 Correction

Below PowerPact D-frame Mission Critical Circuit Breakers Table: Added table for Termination Options. Used the D Frame portion of Table 7.54 on page 7-25. Also added the statement below the table "For factory-installed termination...." But only included the D frame example.

Feb-11

7 7-36 Correction Table 7.78: Changed S29450 to S29452. Nov-10

7 7-38 CorrectionTable 7.82: 3rd row under Factory Installed Cat. No. Suffix: Chagned YP to YQ. In Provision and 1 lock, vertical mount row: Deleted JG & Price & JH & price. Changed triangle footnote to: Not available in M frame or HD and HG 2P modules.

Nov-10

7 7-38 Correction

Inserted a new line to Table 7.82 below the 1st Provision only as follows: "Provisions only, vertical mounting one key interlock including padlock provision, open position only".Kirk or Federal Pioneer Under M and P and R frame Factory installed Cat No Suffix: JE $445.00

Feb-11

7 7-39 Correction

Table 7.88: Under Optional column, 4th line: deleted MG, MJ. ON PG,PJ,PL row: deleted Rating, changed 800 Ampere Rating to 1200 A. Added a footnote marker to Catalog # CU250P1K Then added that same footnote marker below the table with this footnote: This lug can only be used on low amp PJ frame breakers where the Instantaneous setting must not be turned OFF. The cables must be laced with rope per lug instructions.Table 7.88: deleted MG, MJ

Nov-10

7 7-40 CorrectionTable 7.89: on last footnote, added to the end "unless wire bending space is adequate." Table 7.90: Dimension A column, last 2 entries changed from 1.65 to 1.28 & 1.31 respectively. Reversed part numbers on the lug pictures.

Nov-10

7 7-42 Correction Table 7.97: Changed end of table caption from (3P only) to (3P or 2P in a 3P module). Nov-107 7-44 Correction Table 7.109: Last row, replaced S48825 with S33984. Nov-10

7 7-45 Correction

Added New Table 7.113: Masterpact NW Circuit Breaker Remote Racking. AND added corresponding photo with caption of: NWMPRRT. NOTE: All tables will be renumbered after this point!Added to table 7.113: S47103 with a price of 290.00 to the last line of the table.

Nov-10

7 7-48 Correction

Table 7.120 (old 7.119) added footnote symbol & corresponding note: For Factory Installation of ELM Module:For termination designation (3rd letter of catalog #) use ONLY "M". Add factory installed 48 Vdc shunt trip (suffix SP) to breaker plus suffix VL or VM.SP - $717 AdderUse VL for H frame - $4736 adderUse VM for J frame - $4886 adderPlus the List Price of the H or J breaker.

Nov-10

7 7-56 CorrectionAdded 3 footnotes to the bottom of table 7.147 with corresponding tags in the table. Changed footnote "Maximum short circuit rating is 18kAIR, 480 Vac." TO: "Maximum short circuit rating is 18kAIR, 480 Vac and 240 Vac."

Oct-09

7 7-56 Correction Table 7.148 (old 7.147) 7th row now reads: LAL, LHL, Q4L. 6th row from bottom, now reads KIL, KCL. Table 7.150 (old 7.149) deleted KAL…WB from 1st row. Nov-10

7 7-56 CorrectionTable 7.148 rows HDL & JDL….removed half vertically filled diamond footnote symbol. New verbiage in footnotes as well. 2nd Version: Table 7.148: removed KAL, & KHL from 7th & 14th rows. Table 7.150: removed KAL & KHL.

Feb-11

7 7-57 Correction Added footnote to Table 7.151: Not UL Listed. Oct-09

7 7-57 Correction Table 7.151 (old 7.50) Deleted 5th row & last 6 rows. Table 7.152 (old 7.151) deleted last 3 rows of table. Nov-10

7 7-57 Correction Table 7.150: removed KAL, MAL & MHL rows. Table 7.151: remvoed KAL, FIL & KCL rows. Feb-11

7 7-58 Correction

From 4th section, Deleted KAL…WB. Deleted KAL…WB row. Deleted MAL, MHL, MXL, MAL, MHL, MXL, MEL from 3rd to last section. Table 7.154 (old 7.154) Deleted KAL, KHL & KAL...WB from 1st row. Deleted MAL, MHL, MXL, MEL from last row. Table 7.155 (old 7.154) deleted the following rows: KA225A, AWK; KA225DS; KA225F; KA225RB; KA225S

Nov-10

7 7-58 CorrectionTable 7.152: removed: KAL, KHL, MAL, MHL, MXL Info. Table 7.153: Removed KAL, KHL, MAL, MHL, MXL & MEL info. Table 7.154: removed KA225A, AWK, KA225DS, KA255F, KA225RB & KA225S rows.

Feb-11

Section Number Page Number Reason for

Change Specific Changes Made Change Date

Page 8: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

8 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

Section 8: Operator Mechanisms and Disconnect Switches

Section 9: Panelboards

Section Number Page Number Reason for Change Specific Changes Made Change Date

8 8-13 AdditionsIn Table 8-47 Under right hand column, added part no. LJ3, Price $230.00, mounting depth 5-1/2-21-3/8.In Tables 8-47, -48, -49, added line for PowerPact D products

Aug-10

8 8-13 Correction Table 8.47 added Row for LJC, 230.00, 5-1/2-21 3/8. Added PowerPact D info to tables 8.47, 8.48 & 8.49. Nov-10

8 8-16 Deletion In Table 8-54, removed lines for Catalog Numbers 30528-358-50S and 30528-369-50S. These catalog numbers are obsolete. Aug-10

8 8-16 Correction Total rework of the page Nov-108 8-16 Correction Table 8.53, changed table reference number for handle selection from 8.52 to 8.55. Feb-118 8-17 Correction Total rework of the page. NOTE: All tables will be renumbered after this point! Nov-10

8 8-20 Correction

Table 8.68: added 600 Vdc column, Changed header straddling last to columns to: Switch and Operating Mechanism Only — Does Not Include Handle Mechanism. Added triangle footnote: For ordering use the suffix 9422, I.e. BTCN30 order using catalog number 9422BTCN30. Deleted 4 rows from the Dimension Table (new table 8

Nov-10

8 8-21 Revision

In table 8.73, changed cable lenght of 36 in. to 48 in. Added footnote symbol to PowerPact M and P and added footnote to table reading “Must use 9422AP1 or 9422AP2 Handle with this operating mechanism.” In table 8.75, under Disconnect Switches, first row, inserted BTDN between BTCN and BTDF.

Aug-10

8 8-21 Correction

Table 8.73 PowerPact M and P: 1) Changed cable length of 36 in. to 48 in. 2) Placed footnote symbol next to PowerPact M and P and added foot note "Must use 9422AP1 or 9422AP2 Handle with this operating mechanism.

Table 8.75 Under Disconnect Switches between BTCN and BTDF inserted BTDN.

Nov-10

8 8-23 Correction Table 8.78 Powerpact M and P-Frame. Changed the 9.00 -18.38 inches to 10.50 - 18.38 inches. Nov-10

Section Number Page Number Reason for

Change Specific Changes Made Change Date

9 9-1 correction Added NQ Merchandised Panelboards to the Table of Contents Oct-099 9-2 Correction Table 9.1: Added rows to the table and corresponding footnote. Nov-10

9 9-3 Correction Table 9.2: Relaced Table with table from NF Instruction Bulletion (80043-741-01) on page 26 Jan-10

9 9-3 Correction Table 9.2 & 9.3: added rows to the tables. Nov-10

9 9-7 correction

In table 9-10, 20 in. Wide cabinet Single Phase section, 30 Pole Spaces row, changed catalog no. NC62() to NC62V() and NC62()HR to NC62V()HR. In 42 Pole Spaces row, changed catalog no. NC62() to NC62V() and NC62()HR to NC62V()HR. In 20 in. Wide cabinet Three Phase section, 30-42 Pole Spaces rows, changed catalog no. NC62() to NC62V() and NC62()HR to NC62V()HR.

Jun-09

9 9-7 correction Added Footnote to Table 9.10: For single phase applications, order a 3-pole breaker. Example: HDL36100. Oct-09

9 9-7 RevisionTable 9.10: Circuit Breaker Frame Size Column: Added footnote to LA/LH (6 places) and corresponding footnote under table: For 400A applications order short handle circuit breaker (LAL36400MB).

Aug-10

9 9-8 correction In table 9.12, 400A Mains rating row, changed Catalog no. NC80()HR toNC80V()HR Jun-099 9-9 correction In table 9.13, Changed “Factory Assembled Only” to “Not Available”. Jun-099 9-9 correction Added DE2E to Discount Schedule at bottom of page. Nov-10

9 9-10 correction Under table 9-18, changed footnote beginning “QOB2150VH uses 4 ...” . “20Amaximum circuit...” was changed to 40A maximum circuit...”. Jun-09

9 9-10 Change

Table 9.18: changed table main head to read: QOB-GFI, QOB-EPD, and QOB-EPE Circuit Breakers. Added 3 Pole Common Trip Columns to table. Changed QOB-EPD-QOB Equipment protection circuit breakers with UL Listed 30 mA equipment protection. To read: QOB-EPD-QOB Equipment protection circuit breakers with UL Listed 30 mA (EPD) or 100 mA (EPE) equipment protection. Added footnote: See note in Instruction Bulletin when using in an enclosure with a QO403 or QON prefix.

Oct-09

9 9-11 Change

Table 9.24: Altered/Added the following: 10,000 AIR Qwik-Gard Class A QO-GFI, QOB-GFI Provided with a 5 mA setting on ground fault sensor 15-30 272 488 - 92040-50 - 488 - 92060 - 488 - -10,000 AIR Qwik-Gard Class A QO-EPD, QOB-EPD Provided with a 30 mA setting on ground fault sensor 15-30 457 738 - 121040-50 - 738 - 121060 - 738 - -10,000 AIR Qwik-Gard Class A QO-EPE, QOB-EPE Provided with a 100 mA setting on ground fault sensor 15-30 - - - 121040-50 - - - 1210 and on Table 9.26 in the footnote Changed QL to QJTable 9.24: added a column "3-pole 208Y/120 Vac". Changed 40-60 to 40-50 in 3 places & added prices of 920 for 15-30 & 40-50 in QO-GFI, GOB-GFI.

Jan-10

9 9-11 PricingTable 9.24: Under subhead: 10,000AIR-Qwik-Gard-Class A-QO-EPD, QOB-EPD. Changed prices: $457 to $462, $738 to $828 (3 places). Table 9.25: Deleted last two rows.

Aug-10

9 9-11 correction Table 9.27: changed Main Lug for 42 Max. under 400A & 600 A columns TO: 80. Nov-10

9 9-12 addition Added new table 9-37 to page. Title is “NQ Main Neutral Conductors-Required Size and Quantity. Jun-09

9 9-12 Pricing Table 9.43: Changed Prices July-09

9 9-13 correctionIn table 9.45, changed max no. of one-pole EDB circuit Breakers column for 125 A mains rating. Added “Maximum breaker rating opposite is 20A.” to 8th footnote below table 9.45.

Jun-09

9 9-14 CorrectionTable 9.51: Under Sub-feed Circuit Breaker, 30 Circuit: Changed MH68 to MH74.Table 9.51: Under Sub-feed Circuit Breaker, 42 circuit/600 Amp: Changed MH74 to MH80

Jan-10

9 9-14 Pricing Table 9.50 changed 600 Mains Ampacity to FACTORY ASSEMBLED ONLY. Table 9.53 changed prices: $663 to $1122, 779 to 1206, 636 to 987, 1139 to 2236 Aug-10

9 9-14 Correction Table 9.51: changed Cat No MH74 under Sub-Feed Circiut Breaker/42 column TO: MH80. Nov-10

9 9-15 Correction

Added to Table 9.59: EXB Handle TiesED,EG,EJ 2-1 EGB2HT 16.80ED,EG,EJ 3-1 EGB3HT 17.85. Deleted optional lugs at bottom of page.Table 9.59: last 2 entries in column 2: changed TO: Ties 2 – 1P and Ties 3 – 1P respectively. removed 17.85 from Cat No EGB3HT. Changed 7-53 to 7-55 in Dimensions reference pages block.

Nov-10

9 9-18 Correction Table 9.75: Under Main Lugs: 400 A & 600 A Columns: changed 74 TO: 80. Nov-10

Page 9: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

9

www.schneider-electric.us

Section 10: Integrated Power and Control Solutions (IPaCS) Equipment

Section 11: Switchboards and Switchgear

Section 12: Busway

9 9-19 CorrectionIn table 9.75, 800A row, changed (3) 3/0-500 kcmil Al or Cu” to “(6) 3/0-500 kcmil Al or Cu”. Added new table 9-84. Table title is “NF Main Neutral Conductors-Required Size and Quantity”.

Jun-09

9 9-19 Correction Table 9.77: Under 600 A, 30 Circuit Panel, changed height from 68 to 74Table 9.77: Under Column 600 A: Changed last two numbers from 74 & 80 to 80 & 86 Jan-10

9 9-19 Pricing Table 9.91: Changed Prices July-11

9 9-21 Correction Under TYPE HCP-SU heading: added DG, DJ, DL. In Box Size drawing: changed LA, LH to DG, DJ, DL, LA, LH Nov-10

9 9-21 Correction Table 9.96: Under Subhead: HCN Main Circuit Breaker: removed 1st 2 rows. Feb-119 9-22 Correction Changed Box Size: 2 in. Wide to …..Box Size: 42 in. Wide. Oct-09

9 9-22 Correction

Under TYPE HCP header: added DG, DJ, DL & removed Q4. In corresponding drawing: changed Q4, LA, LH to DG, DJ, DL, LA, LH. In triangle footnote: changed KA to JDA. Under TYPE HCR-U heading: added DG, DJ, DL & deleted Q4. In corresponding drawing: changed Q4, LA, LH to DG, DJ, DL, LA, LH. In triangle footnote: changed KA to JDA. Table 9.98: row FA, FH: Type of Circuit Breaker Column: deleted Q4. Row FA, FH, FI, SL-100, same column: changed LC, LI, LX, LXI, LE to DG,DJ, DL / LC, LI, LX.LXI, LE & changed mounting requirement in same rom from 7.5 in. to 6.0 in. / 7.5 in. Table 9.99: Changed KA36225 to JDA36225.

Nov-10

9 9-23 Correction Table 9.105: Added 800 Rating Row. Nov-109 9-24 Correction Bottom of page under Accessories: changed page references to: 7-49 & 7-54. Nov-10

9 9-25 Correction

Table 9.114: Triangle footnote: replaced "For accessories, see page 7-37" with "No accessories are available for PowerPact Q Frame breakers." Changed page references at bottom to: 7-49, 7-54 & 7-54.References Pages block at bottom of page: Removed Q Frame Accessories.

Nov-10

9 9-26 Correction Changed page references at bottom of page to 7-36 & 7-39. Nov-10

9 9-27 Correction Changed page references at bottom of page to 7-50 & 7-54.Under table 9.124: Changed "See page 7-9" to "See Table 9-123" Nov-10

9 9-28 Correction

Table 9.127: Added square footnote mark next to (600 Vac) in table.Then added square footnote below table 9.127:* Type LC and LI circuit breakers are NOT recommended for use on single-motor branch circuits. Changed page references to 7-51 & 7-54. Added discount schedule box at bottome of page: DE2

Nov-10

9 9-29 Correction

Under Interrupt Ratings (kA): removed LX, LE, LXI part of table. Added triagle footnote with marker on "L" in column heading. Corresponding footnote reads: L interrupting rating is not available in M-frame.Add a square footnote behind the 600 V. This footnote should reads ^600 V interrupt ratings not available for D-frame. under L column, 600 V: changed from — to 25. Table 9.130: in table caption: Added after M-frame: with ET1.0 Factory - sealed trip unit (not field adjustable). Completely replaced Table 9.129: with D-Frame Info. Changed page references as follows: 7-53 to 7-54, 7-50 to 7-51, 7-35 to 7-36, 7-54 to 7-55 & 7-38 to 7-39.Table 9.129: Changed trip unit from "SR53UP-F" to "STR53UP-F", Under J Interrupting column: Changed the 4 references of "DKA" to "DJA"

Nov-10

9 9-29 Correction/Pricing

Added LA Mission Critical Circuit Breakers and PowerPact D frame Mission Critical Circuit Breakers from 7-35. In the tables changed LAL to LA and LHL to LH (LAL to LA) dropping the second L. D frame changed the M to A in the catalog number (DJM to DJA). For pricing used the following: LA - 5287, 5287, 5680, 6930; LH - 8488, 8488, 8883, 10143; D - 10867, 10867, 10867, 17148.

Feb-11

9 9-30 Correction

Replace page reference numbers as follows: 54 with 5542 with 4338 with 3943 with 4435 with 36

Nov-10

9 9-31 CorrectionTable 9.133: replaced all Maximum Branch Circuit column info & deleted square footnote. Table 9.134: replaced all Maximum Branch Circuit column info. Moved Some columns to Supplemental & added some columns. Replaced Table 9.136.

Nov-10

9 9-32 Correction

Table 9.139 Under thermal-magnetic Circuit Breakers Subhead: changed 2nd to last entry PJ to PJ/PK. Under Micrologic Circuit Breakers (% Rated) subhead: Moved LX, LXI & LE info to supplemental Digest added DG/DJ/DL info. And updated the corresponding footnote. Under same subhead changed PJ to PJ/PK & PJC to PJC/PKC.

Nov-10

9 9-41 New Page Added Oct-09

Section Number Page Number Reason for Change Specific Changes Made Change Date

10 10-1 product change Changed “Generator Quick Connect Tap Box” to “Standby Power Quick Connect Tap Box” Jun-09

10 10-2 product changeChanged title and text for paragraph “Generator Quick Connect Tap Box” to “Standb Power Quc Connect Tap Box” title and text.

Jun-09

10 10-4 product change

Removed title and text for “Generator Qucik Connec Tap Box” and replaced it with title and text for “Standby Power Qucik Connect Tap Box”. Replaced Generator Tap Box image with Standby Power Tap Box image at top of page.

Jun-09

Section Number Page Number Reason for Change Specific Changes Made Change Date

11 11-6 corrections Added Digest Page reference after “...Type H trip units” in second paragraph under Micrologic Trip Units.

11 11-9 corrections

In table 11.17, revised Fuse Range values. In table 11.20, removed Catalog Numbers HVLCCMBA14B14, HVLCCMBA14B20, HVLCCMBA20B14, HVLCCMBA20B20, HVLCCMBB14A14, HVLCCMBB14A20, HVLCCMBB20A14 and HVLCCMBB20A20.

Jun-09

11 11-10 corrections In table 11.25, removed Catalog Numbers 55DE540, 55DE600, 155DE225, 155DE270, 155DE315 and 155DE360. Jun-09

11 11-11 revision In table 11.29, changed part no. HVL315 DEW to HVL305DEW. Jun-09

11 11-13 revision In table 11.38, changed HVLC line side connector kit description. “(top only)” changed to “(Bottom Entry only.)”. Jun-09

11 11-14 revision In table 11.39, changed part no 175DE175 to 155DE175 and 175DE200 to 155DE200. v

Section Number Page Number Reason for Change Specific Changes Made Change Date

12 12-1 Revision Changed Table of Contents to reflect New & Moved Information for each proof. Nov-1112 12-4 addition to table In table 12.18, added Seismic column and applicable price column Jun-09

Section Number Page Number Reason for

Change Specific Changes Made Change Date

Page 10: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

10 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

Section 14: Transformers

Section 16: NEMA Definite Purpose Type Contactors and Starters

12 12-5 addition to table In table 12.23, added Seismic column and applicable price column Jun-0912 12-5 Revision Table 12.23: removed 3200 row Nov-1112 12-6 Correction Replaced Indoor Drip Resistant Busway info. Nov-1012 12-6 Revision Table 12.24: removed 3200 row Nov-11

12 12-8 Revision Table 12.27: removed 3200 row. Added Note below table: "6 cycle and 30 cycle ratings available. Please reference the Busway Catalog." Nov-11

12 12-9 Revision

Changed Table 12.28 heading to "Fusible Plug-in Units". Added footnote "For the PQ and PS units, add "M54" suffix for IP54 splash resistant construction. IP54 price adder is 15%." Changed Table 12.30 heading to: Circuit Breaker Plug-In Units. Table 12.31: changed header to: Circuit Breaker Plug-In Units. THEN, removed MA & PA frames and combined info from tables 12.31 & .32 in order: FH, LA, LH. Deleted last 2 footnotes under table 12.31.

Nov-11

12 12-10 Revision

Table 12.32: Changed header: Circuit Breaker Plug-In Units. Deleted MH breakers and footnotes from the table. Table 12.33: changed header to: Circuit Breaker Plug-In Units—Current Limiting. Table 12.34: changed header to: Circuit Breaker Plug-In Units—Current Limiting, removed MA & footnotes. Table 12.35: changed header to:LC-Frame Plug-In Units, deleted W from table head.Table 12.36: changed header to: LX-Frame Plug-In Units—Solid State Trip & Deleted MX & PX and last footnote. 2nd set of changes: Added footnote symbol to header "Surge Protection Device Plug-In Units". Changed the IP54 note to a footnote.3rd set of changes: Table 12.40: Changed last two prices to 788.00 and 1304.00

Nov-11

12 12-11 Revision

Table 12.42 changed header to: PowerPact Circuit Breakers Interrupting Ratings. Added Note"For IP54 splash resistant construction, add "M54" suffix. IP54 price adder is 15%". Below table 12.41. Added new tables for new H & J- Frame Plug-in Units with Micrologic Trip. Also added new tables for new M & P-Frame Plug-in Units. 2nd set of changes: Added PowerPact® to page header. Changed the IP54 note to a footnote. Moved Table 12.45 to bottom of page. Put table 12.46 & 47 on same page, changed pricing and deleted duplicate notes. 3rd set of changes: Changed page header to read: PowerPact H- and J-Frame Plug-in Units. Moved Note to be under Table 12.44 to be under Table 12.42.

Nov-11

12 12-12 Correction Table 12.44: Cat N0: PTRJ36130GN()U33A: deleted 100% Rated price 51340.00 and put in a —. Nov-10

12 12-12 Revision

Deleted table 12.45 and Added Note "For IP54 splash resistant construction, add "M54" suffix. IP54 price adder is 15%". 2nd set of changes: Added PowerPact® to page header. Changed the IP54 note to a footnote. 3rd set of changes: Changed page header to read: PowerPact M- and P-Frame Plug-in Units. Made footnotes span across entire width of page.

Nov-11

12 12-13 CorrectionChanged TVSS header to Surge Protection Device Plug-in Units. Changed Busway TVSS Plug-In Units to Buwsay SPD Plug-In Units.changed the "Refer to Catalog" at the top of the page to 5600CT9101

Nov-10

12 12-13 Revision

Moved these tables to page 12-10. Added Note"For IP54 splash resistant construction, add "M54" suffix. IP54 price adder is 15%". Below table 12.49. 2nd set of changes: Added PowerPact® to page header. Changed the IP54 note to a footnote. 3rd set of changes: Changed page header to read: PowerPact R-Frame Plug-in Units.

Nov-11

12 12-16 revision Revised table 12.56, changed pricing. Jun-09

Section Number Page Number Reason for Change Specific Changes Made Change Date

14 14-9 Correction

Table 14.19: Changed Enclosures on the following 2.4 kV subhead: row 2000, from 41F to 42F. Under 15 kV header: rows 112.5, from 30D to 38D, 150: 30D to 38D, 225: 31D to 38D, 300: 31D to 45D, 500: 32F to 44F, 750: 33F to 39F, 1000: 33F to 40 F, 1500: 33F to 40F, 2000: 34F to 41F, 2500: 34F to 42F, 3000: 35F to 42F.

Aug-10

14 14-10 Revision Table 14.23: added row at bottom. Aug-10

Section Number Page Number Reason for

Change Specific Changes Made Change Date

16 16-9 Correction

Table 16.25: changed Price in left hand column from $77.00 to $116.00 and from $105.00 to $158.00.Table 16.27: Changed NEMA 4/4X Stainless to Ser A & B. Added row underneath: NEMA 4/4X (Stainless) Ser. C) Type MWB, MCW….31085-381-50…57.00.

Nov-10

16 16-11 correction added at the end of the first section (introduction): 'To get details informationabout TeSys U, visit our web at www.us.schneider-electric.com/TeSysU' Oct-09

16 11 Correction

Table 16.31: Changed Table Header to: Step 1. Select Power Base & removed the LUS32NR row. Table 16.32: Removed references to LUS32 and LUS32NR from the footnote. Last table on the page replaced 'Accessories for both LUS32/LUS32NR and LUB32/LUB32NR' with'Accessories for LUB32/LUB32NR'Removed the line "TeSys U Starter" row from the table at the bottom of the page.

Jan-10

16 16-23 correction Figure 1 Drawing & Caption was missing. NOTE: it was in the file, just behind Figure 2 Drawing, so moved it out from under. Oct-09

16 16-32 Correction Table 16.84 Corrected List Price in NEMA 1 General Purpose Enclosure Column. SBG33 in both the 460V and 575V changed from 11,394.00 to 1,394.00 Nov-10

16 16-34 Correction

Table: 16.90: Numerous HP & Cat No changes.Table 16.90: Deleted several rows & changed 1 rowChanged the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-34 - 16-38. . Removed Mag-Gard in page title and replaced with MCP.

Nov-10

16 16-34 Revisions Changes made to multiple rows & columns. 2nd PROOF: Changed JJL to JLL in 2 places in Tabel 16.90 Mar-11

16 16-35 Correction

Table 16.92: Numerous HP & Cat No changes.Table 16.92: Deleted several rows & changed 1 row.Changed the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-34 - 16-38. Removed Mag-Gard in page title and replaced with MCP

Nov-10

16 16-35 Revisions Changes made to multiple rows & columns. 2nd PROOF: Table 19.62: changed JJL to JLL & changed SHA554 to SHA55. Mar-11

16 16-36 Correction

Table 16.94: Numerous HP & Cat No changes.Table 16.94: Deleted several rows & changed 1 row.Changed the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-34 - 16-38. Removed Mag-Gard in page title and replaced with MCP.

Nov-10

16 16-37 Correction

Table 16.96: Changed Circuit Breaker Types.Table 16.96: Deleted several rows & altered some Type numbers.Changed the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-34 - 16-38

Nov-10

16 16-37 Revisions Changes made to multiple rows & columns. 2nd PROOF: Table 16.96: changed JJL to JLL in 2 places. Mar-11

Section Number Page Number Reason for Change Specific Changes Made Change Date

Page 11: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

11

www.schneider-electric.us

16 16-38 Correction

Table 16.98 & 99: Changed Circuit Breaker Types.Table 16.98: Deleted several rows & altered some Type numbers. Table 16.99: Deleted 1st 3 rowsChanged the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-34 - 16-38. Table 16.98: Row "5" of 575 (600) section….changed all 5's to 1's.

Nov-10

16 16-38 Revisions Changes made to multiple rows & columns. Mar-1116 16-39 Correction REPLACED Tables 16.100, 101 & 102. Nov-10

16 16-41 CorrectionDimensions tables 16.110, 16.112 and 16.113 changed by adding a separate dimension line for the Class 8539 Class numbers on the Size 9 & 1.Table 16.141: Deleted several rows & changed 1 row.

Nov-10

16 16-43 CorrectionTable 16.120 Size 3 contactor.NEMA 7 & 9 enclosure. Removed the SET43 and SER3 along with $10,439 and $13,059 pricingTable 16.143: Deleted several rows & changed 1 row.

Nov-10

16 16-45 CorrectionTable 16.124. Size 3 starter, NEMA 7 & 9 enclosure. Removed the SET43 and SER3 along with $10673. and $13,343 pricing.Table 16.145: Deleted several rows & altered some Type numbers.

Nov-10

16 16-48 CorrectionTable 16.130. Deleted the entire table and footnote. NOTE: ALL TABLES WILL RENUMBER AFTER THIS POINT.Table 16.146: Deleted several rows & changed several rows.

Nov-10

16 16-52 Correction

Table 16.142: Changed Circuit Breaker Types.Changed the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-52 - 16-55. Removed Mag-Gard in page title and replaced with MCP.

Nov-10

16 16-52 Revisions Changes made to multiple rows & columns. 2nd PROOF: Table 16.141: changed JJL to JLL in 2 places. Mar-11

16 16-53 Correction

Table 16.144: Changed Circuit Breaker Types.Changed the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-52 - 16-55. Removed Mag-Gard in page title and replaced with MCP.

Nov-10

16 16-52 Revisions Changes made to multiple rows & columns. Mar-11

16 16-54 Correction

Table 16.146: Changed Circuit Breaker Types.Changed the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-52 - 16-55Changed the statement "See Digest 175 Page 16-44 - Page 16-46 forcatalog number contact CIC for pricing" TO: 16-52 - 16-55. Replaced Table 16.149.

Nov-10

16 16-54 Revisions Changes made to multiple rows & columns. Mar-11

16 16-55 Correction Table 16.147: Changed Circuit Breaker Types. Deleted Cat Nos: SET6, SET3, SET1, SFT5, SFT3, SFT4, SET4, SET6, SET3, SFT6, SFT5, SFT1. Nov-10

16 16-55 Revisions Changes made to multiple rows & columns. 2nd PROOF: Table 16.146: Changed SGA41 to SGA4. Table 16.149: Changed several rows. Mar-11

16 16-59 Correction Table 16.162: Deleted Cat Nos: SER1, SER2, SER3, SER4. Table 16.163: Deleted Cat Nos: CER1, CER2, CER3, CER4. Nov-10

16 16-60 Correction Table 16.164: removed diamond footnote. Nov-1016 16-65 Correction Table 16.182 Footnote. Changed page 16-115 to 16-114. Nov-1016 16-69 Correction Table 16.198. Deleted Form G53. Nov-10

16 16-71 Correction Table 16.200 very bottom line. Changed catalog number 8501X011 to 8501XO11 in all six instances. Nov-10

16 16-75 Correction Table 16.211. Ampere Rating Column. Changed the second 200 to 300 for the type SXG6 and SXG81 Nov-10

16 16-76 Correction

Table 16.214: Deleted Horsepower Ratings Columns, Changed Locked Rotor Amps: Under 277 V: 100 to 120, 125 to 150, Under 460 V: 150 to 125, Under 575 V: 120 to 100. Table 16.215: Deleted Horsepower Ratings Columns, Changed Locked Rotor Amps: Under 277 V: 100 to 120, 125 to 150, Under 460 V: 150 to 125, Under 575 V: 120 to 100. Table 16.216: deleted "Diamond" footnote symbol & actual footnote. Row 1: changed Resistive Load Amps from 25 to 30 & the firts 3 Horsepower ratings: 1 to 1.5, 2 to 3, 5 to 7-1/2. 2nd row: changed Horsepowerratings: 3 to 5, 7-1/2 to 10 10 to 15/20. Row 3: changed HP ratings: 15 to 15/20. Row 4: Changed HP ratings 20 to 20/25. Deleted last 4 rows of the table.

Nov-10

16 16-77 Correction

Table 16.219: Under Class 9999 Type Heading: Divided into 2 columns 20-40 A & 50-90 A. Deleted last 3 rows of the table. Table 16.220: Deleted last 2 rows & 120 from the DPA amperes column. Table 16.222: deleted 1st 2 rows. In the footnotes underthe table: Star: changed DPA33V02 to DPA53V02 & DA1V02 to DA2V02. Deleted note under the footnotes. Table: 16.223: deleted last 4 rows. Table 16.225: deleted Cu/Al box lugs rows. Deleted Auxiliary Contact Installation illustration.Table 16.218: Added Subheads under Class 9999 Type Header: 20–40 A & 50–90 A.

Nov-10

16 16-78 Correction Replaced 1st 4 drawings, moved last 2 drawings to page 16-79. Nov-1016 16-79 Correction Deleted all drawings on the page. Moved last 2 drawings from page 16-78 onto the page. Nov-10

16 16-80 CorrectionTable 16.227: Removed 1st 3 rows & last 3 rows of the table. Changed price in triangle footnote to $21.50. Table 16.230: deleted 1st & last rows. Table 16.232: Changed Class Types to DD10, DD01, DD11, DD20 respectively.

Nov-10

16 16-80 Corrections

Table 16.226: removed Locked Rotor Amperes Column. Chagned Horsepower ratings in several rows. Table 16.231: Removed Open Star Symbol & corresponding footnote. Added New column for 50A & note under table. 2nd PROOF: Table 16.226: changed 1.5 to 1 1/2 in 2 places. Table 16.231: changed D20 to D10.

Mar-11

16 16-82 Revisions Table 16.238 & 16.239: multiple changes in each column. Table 16.240: changed Available Amperes numbers. 2nd PROOF: Table 16.240: Changed several rows. Mar-11

16 16-83 Revisions Table 16.238: multiple changes in circuit breaker type columns. Mar-11

16 16-84 Correction Table 16.242 For SSG and XSG. Inches in Column A. Changed from 74.50 to 75.50 and Inches in Column F change from .50 to 74.50. Nov-10

16 16-85 Revisions Table 16.243: multiple changes in circuit breaker columns. 2nd PROOF: Table 16.243: changed 70 to 90 in 1 instance. Mar-11

16 16-89 CorrectionTable 16.262 3- Pole Poly-Phase-Deleted the DPR53 and DPR63 with all associated data in their lines.Table 16.262: Added "D" in front of all 4 Class 9999 Type numbers.

Nov-10

16 16-90 Correction Table 16.268. Deleted entire sentence starting with: Modify Type U Relay... and Form Y21 Nov-10

16 16-91 Correction

Table 16.273: Changed footnotes to read:Must use 150:5 external current transformer which is purchased separately.Must use 300:5 external current transformer which is purchased separately.Must use 600:5 external current transformer which is purchased separately.

Nov-10

16 16-92 correction

added at the end of the first section (introduction): 'To get details informationabout TeSys T, visit our web at www.us.schneider-electric.com/TeSysT'. In Tables 16-275 and 16.276, replaced 'Supply Voltage' with 'Control Voltage'. In Table 16.279, replaced 'Powersuite 2.5 or greater' by 'Powersuite 2.6 or greater'. Table 16.279 Changed reference from Page 16-96 to 16-95 on PowerLogic SMS 4.0. changed LTMR08MBD picture to LMRR27EBD. Changed LTMEV40BD to LTMEV40FM.

Oct-09

16 16-93 correctionin section 'Possible Configurations': replaced 'Powersuite 2.5 commissioningtools' with 'Powersuite 2.6 commissioning tool'. In Section Motor Control modes, replaced 'Powersuite 2.5' with 'Powersuite 2.6'

Oct-09

Section Number Page Number Reason for

Change Specific Changes Made Change Date

Page 12: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

12 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

Section 17: Motor Control Centers

Section 18: IEC Contactors and Starters

Section 19: Push Buttons & Operator Interface

16 16-94 correction Changed LTMR08MBD picture to LMRR27EBD. Changed LTMEV40BD to LTMEV40FM. Oct-09

116 16-95 correction In section 'configuration with powersuite', replaced 'version 2.5' with 'version2.6' Oct-09

16 16-96 correction moved Section 'TeSys T and SMS Powerlogic' + the picture to the bottom of page 16-95 Oct-09

16 16-102 CorrectionAsked for change in Table 16.293 BUT it has been renumbered to 16.296: Removed the open triangle footnote from the NEMA 12/3R Dusttight and Driptight header and added it to all part numbers except for MA1 as it does not apply to that part number.

Jan-10

16 16-102 Correction Table 16.296: Under the NEMA 12/3R Dustight and Driptight heading - Number of Closing Plates. Changed 2 to 3 in all occurrences under this column. Nov-10

16 16-104 CorrectionChanged bottom photo caption to read:Type SCA11 NEMA 12 Enclosure

Nov-10

16 16-110 Correction Table 16.314: under control circuit transformers: removed prices on last 2 rows under columns 6 & 7. Nov-10

16 16-111 CorrectionUnder: Solid State Overload table in the notes: Changed "The first form number is for the low speed winding ad the second is for the high speed winding." TO: The catalog number will be alphanumeric. Changed Catalog Number to Order: 8810SF01V02H20H202S.

Nov-10

16 16-113 Correction Table 16.324: In Auxiliary Contacts row: 1st entry, after Each, added: will be X_ _ (2 digits) I.e. X01. In Enclosures row: Deleted last 6 lines of table. Nov-10

16 16-114 Correction Fixed alignment of Coil Prefix 31041-400 row. Aug-10

16 16-117 Correction Under Contact Units for Melting Alloy header: changed sizes 00-4 to 00-6 and deleted the rest of the sentence after that. Nov-10

16 16-128 Correction Changed bottom row of numbers in graph to: 0.2, 0.4, 0.6, 0.8, 1.0, 1.2, 1.4 Nov-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

17 17-4 Revision Table 17.1: changed NEMA Size 4 Space (IN) from 21 to 30 in 2 places. Table 17.2: changed NEMA Size 4 Space (IN) From 33 to 39 in 2 places. Feb-11

Section Number Page Number Reason for Change Specific Changes Made Change Date

18 18-1 Correction in the table of content, it says TeSys T is on page 16-91, changed to page 16-92 Oct-0918 18-4 Correction In table 18.2, changed current setting for LRD340 from “20-40” to “30-40”. Jul-09

18 18-21 Correction

Table 18.69: Under 200V changed last entry from 25 to 30, Under 460V changed 50 to 40. Table 18.70: Under 200V changed 25 to 30, Under 460V changed 50 to 40. Added 7 rows of new overload codes. Changed overload codes: 22, 53, 55, 57, 59 chagned "For Use On Contactors" Column D40-D80 to D80

Aug-10

18 18-21 Correction Table 18.69: in 200V column: changed 7.5 to 5, 10 to 7.5, 15 to 12 & 25 to 30. Table 18.70: 1st column: chagned 7.5 to 5, 10 to 7.5, 15 to 12 & 25 to 30. Nov-10

18 18-22 CorrectionTable 18.72: changed 7.5 to 5 & 10 to 7.5. Table 18.73: changed 7.5 to 5 & 10 to 7.5. Table 18.74: changed 7.5 to 5 & 10 to 7.5. Table 18.75: changed 7.5 to 5 & 10 to 7.5. Table 18.76: changed 7.5 to 5 & 10 to 7.5. Table 18.77: changed 7.5 to 5 & 10 to 7.5.

Nov-10

18 18-23 Correction In the table 18.79, line 3: changed part number LA9TFD25 to LA9TFD15 Feb-11

18 18-28 Correction added at the end of the first section (introduction): 'To get details informationabout TeSys U, visit our web at www.us.schneider-electric.com/TeSysU' Oct-09

18 18-28 Correction

Table 18.109: Removed reference to LUS32 from the footnote.Table 18.111: Overload Trip (Remote/Auto Reset) COLUMN: Removed O's & I's from the Auxiliary Contact Function Modules cells. Accessory table ( the table with no number)removed the line TeSys U Starter | Use TeSys U as a starter only | 18-32.

Jan-10

18 18-30 Correction

Table 18.115: Removed reference to LUS32 from the footnote.Table 18.114: removed Single Phase columns. Added footnote Voltage code required & added corresponding symbols to LU2B12 & LU2B32. Fixed all other footnote symbols.

Jan-10

18 18-32 Correction Table 18.121: Removed entire table, all tables from this point forward are renumbered. Table 18.125: Removed reference to LUS12 and LUS32 Jan-10

18 18-33 Correction Table 18.126: Changed all 1200 A to 450 A. July-11

Section Number Page Number Reason for

Change Specific Changes Made Change Date

19 19-1 Change Added Control and Signaling to the Content page Jan-10

19 19-2 Correction For Type O, changed the UL file number from E42259 to E179183. For Type J, changed the UL file number from E42259 to E78403. Mar-10

19 19-7 Addition Added wire lengths to “Connection Type row” at bottom of table. Jun-09

19 19-24 Correction In table 19-57, changed part no. XB4BS8444 to XB4BS84441; changed N.O. Contact from none to 1; changed (ZB4BZ104 + ZB4BS844) to (ZB4BZ141 + ZB4BS844) Jun-09

19 19-63 Correction Changed 2-1/4” Dia. Mushroom Button, color “Red” row to show solid diamond footnote symbol. Jun-09

19 19-64 Correction In table 19-74, Part no. KR9R94H13 - changed dimensions to 1-5/8” (40mm). Jun-09

19 19-68 Correction Table 19.188 changed following suffixes: 1 to 01, 2 to 02, 4 to 04, 5 to 05, 6 to 06, 7 to 07, 8 to 08 & 9 to 09. Oct-09

19 19-70 CorrectionChanged triangle footnote to read: Add the voltage assembly code as chose from Table 19.228 or Table 18.229 on page 19-82. EXAMPLE: KT(triangle)R31 with 208 Vac red LED = KT37LRR31

Oct-09

19 19-72 CorrectionIn table 19-198, in the Momentary Interlocked Dual Function row, changed KR6GRH7 TO KR67GRH7, KR6GRH37 to KR67GRH37. In Maintained Interlocked Dual Functon row, changed KR6GRH7 to KR7GRH7, KR6GRH37 to KR7GRH37.

Jun-09

19 19-77 Correction Deleted key operated rows from Non-illuminated section of table 19-215 Jun-09

19 19-78 CorrectionTable 19.219 changed following suffixes: 1 to 01, 2 to 02, 4 to 04, 5 to 05, 6 to 06, 7 to 07, 8 to 08 & 9 to 09. Table 19.218: changed the type SK operators part numbers to the following: SK20, SK21, SK22 and SK23

Oct-09

19 19-70 CorrectionChanged triangle footnote to read: Add the voltage assembly code as chose from Table 19.228 or Table 18.229 on page 19-82. EXAMPLE: SKT(half filled diamond)R31 with 208 Vac red LED = SKT37LRR31

Oct-09

19 19-84 Correction

Moved: "Hole Punch: Use Greenlee Tool #60242 to punch mounting hole and notch" to appear underneath the Mounting Hole line drawing. Added dimensions A-F to centerline spacing drawing. Added note under centerline spacing drawing: "See Table 19.243 for dimensions A-F minimum centerline spacing. Added table from Diges 174 page 19-82

Oct-09

19 19-102 Correction Table 19.299: Changed Type from KYK218 to KYK21 Oct-0919 19-102 Corrrection Changed operator part number from SR11U to SKR11U.

Section Number Page Number Reason for

Change Specific Changes Made Change Date

Page 13: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

13

www.schneider-electric.us

Section 20: Electronic Sensors and Machine Cabling

Section 21: Limit Switches

Section 22: Pressure, Vacuum, Temperature and Float Switches

Section 23: Relays & Timers

19 19-103 Correction

In table 19.301, in the height column, moved the 300 value in the XVCZ23 row up one line to the XVCZ13 row. Table 19.301: Mount tube and base row: changed Diameter to: 106, 120 and 130. Chanded the Height to 300. L-shape mounting bracket row: changed Diameter to: 84, 106 and 120. Changed Height to –.

Oct-09

19 19-107 Correction Changed XBV081 to XVBC081 next to the drawing in 2 instances. Removed the ' in XBVC2'1 Oct-09

19 19-116 Correction Table 19.347: In Column 2 under "catalog number" changed 8th item down from ZB2BY23 to ZB2BY2371. Jan-10

19 19-122 Revision Changed Target Table to show 12 positions instead of 11. Jun-0919 19-123 New Page Added Added photo, made many grammatical changes Jan-1019 19-124 New Page Added Added photo, made many grammatical changes Jan-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

20 20-3 pricing Changed pricing for XUBLAKCNL2T to $330.00; Changed pricing for XGHB211345 to $52.50. Jun-09

20 20-7 Pricing

Table 20.11: Changed catalog numbers & prices: XSZB108 to 9006PA08 3.30XSZB112 to 9006PA12 4.80XSZB118 to 9006PA18 4.80XSZB130 to 9006PA30 6.30

Jan-10

20 20-9 revision Revised catalog numbers in table 20-16 to new part numbering scheme. Jun-09

20 20-9 Correction On table 20.16: XXV18 mm Ultrasonic Sensor.Changed the supply voltage to be 10 to 36 Vdc Jan-10

20 20-10 correction, pricing

Under output type, Proximity, changed “NPN Sinking” to “NPN Sourcing”. Changed pricing for SM600A21600 an SM600A21610 to $487.50. Changed pricing for SM650A21600 and SM650A21610 to $520.50. For all products with Environmental Protection ratings of NEMA 4X, added not “(indoor use only)”.

Jun-09

20 20-11 Correction Table 20.21: Under Virtu 30 mm DUAL LEVEL pump-in, pump out. All parts thatstarted with "XX6V3", were to changee to start with "XX2V3" Jan-10

20 20-12 pricing Changed pricing for RFID (Radio Frequency Identification) Products. Jun-09

Section Number Page Number Reason for

Change Specific Changes Made Change Date

21 21-33 Correction Table 21.3: changed pricing. Oct-09

Section Number Page Number Reason for

Change Specific Changes Made Change Date

22 22-4 revision

For table 22.3, revised 2nd footnote to read “For a bulk package (25 units), add TQ to the end of the catalog number.The minimum order quantity is 50 units (two bulk packs). When ordering, specify the individual number of units, NOT the number of bulk packs. The bulk price per unit is $150 each. Minimum order quantity for factory ordered individual items (non-stock) is 48 pieces.”

Jun-09

22 22-5 revisions Removed table 22.5. Removed all images in left hand column. Added text at top of page “For connectors and cables, see Table 22-09 on page 22-7.' Jun-09

22 22-6 revision In table 22.8, changed column value “01” to “02”. Removed “01” and “11” options from Output column. Jun-09

22 22-6 Correction

Table 22-7:Changed XMLF 100 D 2 01 5 (example and breakdown) To XMLF 100 D 2 02 5. Under Output column, added these options: 01: DC Analog 4 – 20 mA, shunt calibration 11: DC Analog 0 – 10V, shunt calibration

Replaced Table 22.7

Oct-09

22 22-7 remove catalog number In table 22.10 removed M12 Snap-C connector row. Jun-09

22 22-11 revision In table 22.21 In the Diaphragm Actuated Section, revised the Approximate Mid-Range Differential values. Jun-09

22 22-11 Correction Deleted 1st row in Table 22.21 Actuator prepared for oxygen service Oct-0922 22-16 pricing Changed price for Form E3 from $52.50 to $78.00. Jun-09

22 22-17 addition Added CSA log and file number to bottom of page. Added Form V1 to tables 22.40 and 22.42. Jun-09

22 22-17 CorrectionTable 22.41: Added Form V1 to Range Scale Window. TABLE 22.41 REMOVED, (standard with Forms K and K1) from Range scale window row AND changed the FORM column to just be V1

Oct-09

22 22-18 addition Added CSA log and file number to top of page. Jun-0922 22-20 Correction Changed CSA File Numbers to be CSA 25490 and 26817 Oct-0922 22-21 Correction Deleted roing in Table 22.21 Oct-0922 22-23 pricing In table 22.72 Changed Form L pricing from $19.50 to $29.30. Jun-09

22 22-24 revision At top of page, deleted “Ambient temperature ratings: Min. -30 °C (-22 °F); Max. +105 °C (+220 °F)” at top of page. Jun-09

22 22-25 revision At top of page, deleted “Ambient temperature ratings: Min. -30 °C (-22 °F); Max. +105 °C (+220 °F)” at top of page. Added table 22.80, Temperature Ratings for Class 9038. Jun-09

Section Number Page Number Reason for Change Specific Changes Made Change Date

23 23-1 CorrectionAdded Solid State Relays Heading & Panel Mount, DIN Mount & SSR Accessories Subheads Added. Changed photos to show new products: SSR, REG24, REG49, REG96, & moved RM17,RM35 to bottom of page

Oct-09

23 23-1 CorrectionAdded RSL to Zelio® Plug-in Relays listing.Moved New! Icon next to Zelio® Plug-in Relays. Changed RSL photo. Changed RSL page # reference

Jan-10

23 23-8 CorrectionBasically replaced all info/photos on the page.Started over with original page &made RSL information/photos a separate page (23-45).

Jan-10

23 23-43 New Page Added Changed Catalog reference at top to: 8501CT0601. Moved New Icon to left at top of page. Tables 23.206 & 23.207, changed pricing. Changed Discount Schedule to CP1 Oct-09

Section Number Page Number Reason for

Change Specific Changes Made Change Date

Page 14: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

14 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

Section 26: AC Drives & Soft Starts

Supplemental and Obsolescense Digest 175

Revised through January 2011

Supplemental and Obsolescense Digest

23 23-43 CorrectionTable 23.206: Changed $ Price to $ Price ea. Above DIN Rail Mounted Sub header: added MOSFET Output info. Table 23.207: change $ Price to $ Price ea. Changed last price in table 13.20 to 2.76

Nov-10

23 23-44 New Page Added

Changed Page Heading to: Control and Measurement Relays. Changed page subhead from Type TEMCO to Type REG. Deleted Class Temperature Controller/ at top of page. Changed Schneider Electric Temperature Controllers to: Zelio® Temperature Controllers & moved NEW! Icon to Left. Changed bullet points under Key features include: to the following:•Modbus communication for easy data exchange with other automation products•Simple parameter settings•IP66 certification enables dust resistance•Flash memory (saves configurations)•Compatible with a wide range of sensors•Advanced Functions (standard): PID, fuzzy logic, auto-tuning, soft startUNDER Optimized programming: deleted last point: Compatible with a wide range of sensors.Changed pricing on Tables 23.208 & 23.209. Changed all 3 photo captions.

Oct-09

23 23-44 Correction Table 23.208: Changed Part Number REG96PUN2RLHU to REG96PUN2LRHU Feb-1123 23-45 New Page Added Added complete new page Jan-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

26 26-4 corrections

In table 26.2, under IP54/UL Type 12 Enclosed columns, moved Catalog numbers ATV31C018M2 thru ATV31CU22M2 up to top of table in 208/230VAC section. Catalog numbers ATV31C037N4 thru ATV31CU22N4 were deleted from table and moved to Table 26.2 under 400/480 Vac section on page 26-5.

Jun-09

26 26-4 Correction Table 26.2: switched headers in 2nd & 3rd columns. NOW READS: kW then HP Oct-09

26 5 correctionCatalog numbers ATV31C037N4 thru ATV31CU22N4 were added from table 26.2 on page 26-4 under 400/480 Vac section.

Jun-09

26 26-9 revision In table 26.7, added rule in “For Use on Drives” column above part no. VW3A3312 and added text “Any ATV61”. Jun-09

Section Number Page Number Reason for Change Specific Changes Made Change Date

2 2-2 pricingChanged price for GDJK600 fom $440.00 to $293.00. Changed price for GD4060LK from $606.00 to 404.00

Jun-09

2 2-3 pricing Revised all prices in table 2.3 Electrical Interlock Kit Jun-092 2-4 pricing In table 2.6 Price Adder Per Lock, changed all prices. Jun-09

3 3-1 Correction Removed K- and from K- and Q4-frame reference. Removed items moving to section 11. Feb-11

3 3-4 Correction Table 3.12: remvoed all KAL, KHL & KCL info & deleted footnote. Feb-11

3 3-5 Correction Table 3.15: removed KA, KH & KC info & deleted footnote. Feb-11

3 3-9 CorrectionTable 3.28: Added the columns headed by "Standard Function Current Limiting" from Digest page 9-29, Table 9.129.

Nov-10

3 3-9 Correction

Table 3.28: Added a new footnote marking to table header and below table added the following footnote: Type LX, LXI and LE circuit breakers are NOT recommended for use on single motor branch circuits.

Feb-11

3 3-10 Correction

Tables 3.30 & 3.31: Removed Obsolescence overlay. Changed page references at bottom as follows: Accessories 11-24, Optional Lugs 11-25, & Dimensions 11-4. Moved entire page to SD 11-20

Feb-11

3 3-11 Correction

Removed overlay and moved entire page to Supplementary section 11-21 and changed pages numbering at bottom of page as follows: Accessories 11-24, Optional Lugs 11-25 & Dimensions 11-4

Feb-11

3 3-12 Correction

Removed overlays from both tables and moved entire page to Supplementary section 11-22 and correcte page numbers at bottom of page as follows: Accessories 11-24, Optional Lugs 11-25 & Dimensions 11-4

Feb-11

3 3-13 Correction Removed overlays and moved entire page to Supplementary section 11-23 Feb-11

3 3-14 Correction

Removed overlays and moved entire page to Supplementary section 11-7 and correcte page numbers at bottom of page as follows: Accessories 11-24, Optional Lugs 11-25 & Dimensions 11-4

Feb-11

3 3-15 Correction

Removed overlays and moved table 3.46 to Supplementary section 11-8 and correcte page numbers at bottom of page as follows: Accessories 11-24, Optional Lugs 11-25 & Dimensions 11-4

Feb-11

3 3-16 Correction

Removed overlay and moved table 3.48 to Supplementary section 11-8.Deleted footnote below table & removed footnote mark from table 3-48. 2nd REVISIONS: Table 3.41; on all 4 lines, changed the 150 to 100.

Feb-11

3 3-17 Correction

Numbered text 2) & 4): deleted KH & MH. Table 3.62: deleted rows: KH, KHL, MH, MHL, MC, MJ Electronic Trip & PH. Table 3.63: deleted rows: KH, KHL, MH, MHL & PH. 2nd REVISIONS: Table 3.57: moved several rows to SD 11-25.

Feb-11

Section Number Page Number Reason for Change Specific Changes Made Change Date

Page 15: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

15

www.schneider-electric.us

3 3-18 Correction

1st paragraph: remvoed: FC, KA, KH, KC. 2nd paragraph: Changed KA36150 To FA36100 and KAB36150 to FAB36100. Under Top-Feed I-Line: Changed KA36150 to FA36100 and KA36150MT to FA36100MT. Under CCBA I-Line Jaw: changed KA36150 to FA36100 and KA36150CBA to FA36100CBA. Under Control Wire Tap Lugs: deleted and KA, & and MA. ALSO: FC, KA, KH, KC, & MA, MH, MX, ME, MC, NA, NC, NX or NE. Table 3.50: deleted FC from 1st row & entire 2nd row.

Feb-11

3 3-19 CorrectionPage header: deleted: I-Line Drawout Connectors and. Table 3. 52: moved KAL, KHL & MAL, MHL rows to Section 11-14.

Feb-11

3 3-20 CorrectionTable 3.53: removed KA, KH row & MA, MH row & square footnote. Under Moisture and Fungus header, last paragraph: removed K, & and M.

Feb-11

3 3-21 Correction

Under Exchange Guarantee Prices Header: removed Example: & corresponding text & NOTE text underneath. Table 3.57: removed KA, KH, MA, MH rows.

Feb-11

3 3-22 Correction

Under Lug Deletion: MA, MH, MX, ME, NA, NC, NX and NE. Table 3.58: replaced the letter K with F on all 4 lines. Under Termination Insert Kits: deleted KA, KH, KC and KI (series 2 and higher). Table 3.59: deleted 1st row. Removed KI drawing & corresponding text. 2nd REVISIONS: Table 3.3.53, 4th row: removed KAL, KHL, KCL

Feb-11

3 3-23 Correction

Numbered text 2) & 4): deleted KH & MH. Table 3.62: deleted rows: KH, KHL, MH, MHL, MC, MJ Electronic Trip & PH. Table 3.63: deleted rows: KH, KHL, MH, MHL & PH. 2nd REVISIONS: Table 3.57: moved several rows to SD 11-25.

Feb-11

3 3-24 CorrectionRemoved overlays from both tables. Moved table 3.65 and a copy of the narrative above table 3.64 to Supplementary Section 11-7.

Feb-11

3 3-25 Correction Table 3.36: deleted rows: 7 thru 15. Feb-11

3 3-26 CorrectionTable 3.68: Auxiliary Switches row: deleted FC, KA, KH. Square footnote: deleted KC to now read "FI or KI".

Feb-11

3 3-27 Correction

Changed NA11212 to LA11212. Same change to paragraph between tables 3.69 and 3.70. Table 3.69: removed FC, KA, KH & KC from 2nd row. MOVED MA, MH & all rows after to Section 11-24. Removed triangle footnote. Table 3.70: moved MA, MH, ME/MX, NA, NC, NE, NX & PH, PH, PC, PE, PX text & drawings to Section 11-24. 2nd REVISIONS: Changed Figure 2 to Figure 21.

Feb-11

3 3-28 Correction

2nd Bullet Point: removed ME/MX, or NA/NC/NE/NX. Table 3.72: Row 1, Deleted FC, Row 2 deleted FCL, Row 3 deleted KA, KH, KC. Table 3.72: 2nd row deleted (2)KA, under Handle Extension: deleted LC from 1st row & entire 2nd row. Under Handle Padlock Attachment: deleted KA, KH & KC in 2nd row, MA, MH, ME & MX in 3rd row, and entire last 2 rows. Also deleted last 2 footnotes. Table 3.73: deleted 2nd & 4th rows. Table 3.74: deleted last row. 2nd REVISIONS: Table 3.69: deleted KCL & adjusted photo & label for FA100Y.

Feb-11

3 3-29 Correction

Table 3.75: Deleted several items from rows. And moved several rows to Section 11-25. Moved bottom 4 lug photos in the left column (AL900MA, AL900MA7, AL1000MA and AL2500PA) as well. 2nd REVISIONS: Deleted KA…RWB (uses side hinge cover) from bottom left drawing.

Feb-11

3 3-30 Correction

Table 3.76: Deleted several items from rows. And moved several rows to Section 11-25. Moved bottom 4 lug photos in the left column (AL900MA, AL900MA7, AL1000MA and AL2500PA) as well. Under Power Distribution Connectors Header: Deleted KA, MA, MH, ME, MX and P. Table 3.77: Deleted several items from rows. And moved several rows to Section 11-25.

Feb-11

3 3-31 Correction Moved entire page to Section 11-26. Feb-11

3 3-32 Correction

Table 3.82: moved last 8 rows to Section 11-26. Table 3.83: row 1, deleted MXL, NXL. Row 2: removed MEL, NEL SE & MXL, NXL. Deleted rows 3 & 4.

Feb-11

3 3-33 Correction Moved the entire left column to Supplementary Section 11-27. Feb-11

3 3-34 Correction

Moved entire page to Supplementary Section 11-27 with several changes. Table 3.91: removed last 2 rows. Changed page reference in table footnote to 3-37.

Feb-11

3 3-35 Correction

Table 3.93: removed KAL, KHL from row & entire KCL row. Moved several rows to Section 11-4. Table 3.94: remvode FCL, KAL, KHL, KCL & LCL & moved several rows to Section 11-4. Copied Figures 21 and 22 for 11-4 and moved Figures 24, 25 and 26.

Feb-11

3 3-36 Obsolete Table 3.95: Deleted all KAL & KHL. Table 3.96: deleted KAL, KHL, MAL & MHL rows. Nov-10

3 3-36 Correction

Table 3.95: removed KAL, KHL from row 1. Remvoed KAL, KCL, KHL from row 2 and deleted entire last row. Also delted hollow star footnote. Table 3.96: removed the following rows: KAL, KHL, MAL, MAL, MAL, MHL, MHL, MHL.

Feb-11

3 3-37 Obsolete Table 3.97: delted KH, MH & NC info. Table 3.98: deleted KA225X & KA225Y rows. Nov-10

3 3-37 CorrectionTable 3.97: removed KH, MH, MH, MH & NC sections. Table 3.98: removed rows 5 thru 8. Removed KA, MA & IK references from drawings.

Feb-11

3 3-38 Obsolete

Table 3.99: Deleted KA & MA from the enclosure prefix column. Table 3.102: deleted KA & MA rows. Table 3.103: deleted KAL row. Table 3.104: deleted KAL & KHL info. Table 3.105: deleted KAL & KHL.

Nov-10

Section Number Page Number Reason for Change Specific Changes Made Change Date

Page 16: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

16 © 2010 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

3 3-38 Correction

Table 3.99: removed KA & MA. Table 3.101: removed KA from the column. And MA, M entire column. Table 3.102 removed rows 2 & 4. Under Enclosed Ground-Fault Modules header: removed "FCL, KAL and KHL" & KA requires G suffix (ground fault shunt trip) circuit brealer." Removed (ex: KAL36225G) from 1st bullet. Table 3.103: removed KAL row. Table 3.104: removed all KAL, KHL, KCL & WB info & table footnote. Table 3.105: remvoed FCL, KAL, KHL, KCL from table.

Feb-11

4 4-1 New Inserted I-Line Panelboards Factory Assembled Pricing 4-2 between Metric Conversion & Metering. Nov-10

4 4-2 New

Moved 3 tables from Digest Section 9 on to the page. Tables will be renumbered from this point on.Added Header: I-Line Panelboards Factory Assembled Pricing above Table 4.1. Table 4.1: changed Basic S in table caption TO: Basic $, same in triangle footnote. In Square footnote: changed based fed TO: back-fed. Table 4.2 Header: Changed LS TO: LX and pages 7-2 through 7-8 TO: pages 7-7. Added missing periods to prices in table. diamond footnote: changed Table 3.136 TO: 4.3

Nov-10

5 5-2 Correction/Price Table 5.2: changed CM732 to 8024878850 & added its price: 2434.00 Nov-10

11 11-1 Corrections/Revisions

Deleted all Compact info, added: M-frame Thermal-Magnetic Circuit Breakers 11-20M-frame Micrologic Electronic Trip Circuit Breakers 11-21N-frame Circuit Breakers 11-22P-frame Circuit Breakers 11-23Micrologic Trip Unit Test Sets 11-26Micrologic Add-on Ground Fault Module (GFM) and Ground Censor Type GA 600Vac 11-27Changed last 4 entries to: Masterpact Circuit Breakers, Control Units, Accessories & Spare Parts. 2nd VERSION: Changed 11-28 to 11-27 and the first 11-29 to 11-28.

Feb-11

11 11-2 Corrections/Revisions

Table 11.1: Added a line above FD,FG,FJ:FC; 100A; 480Vac; 2,3;15-100;FC;See page 11-5Then added a line above IF, IFL:KA,KH,KC;250A;480Vac;2,3;70-250;-;See pgs. 11-6--11-8. Added above FD,FG: EH, Added an "x" opposite the cross off See page 11-16Below the x added "KG". Added 2 lines above XO:CK;1200;480Vac;3;400-1200;xCM;2000;480Vac;3;1250-2000;x 2nd REVISIONS: Added: GJL / NENL , 100A, 480Vac, 3, 15-100, X

Feb-11

11 11-4 Corrections/Revisions

Added drawings & table info from Supplemental Section 3-35 as noted on 3-35. 2nd Version: In table 11.3: Fig. No. column changed the following:8a to 8; 21 to 9; 22 to 10; First 23 to 11; second 23 to 8; 24 to 8; 25 to 12; 26 to 13. Fixed Figure numbering on drawings.

Feb-11

11 11-7 Corrections/Revisions

Added: Not Available in price column for 2P in 1st table. Table 11.2 removed all info & added info from Table 3.65 from Section 3-24. Combined Tables 3.42, 3.43 and 3.44 into one table and moved page 3-14 to 11-7. 2nd VERSION: deleted Not Available from 3P column.

Feb-11

11 11-8 Corrections/RevisionsAdded table 3.46 from Supplemental Section 3-15. Added Table 3.48 from Supplemental Section 3-16 & split into 2 pages.

Feb-11

11 11-9 Corrections/Revisions

Replaced Caution Label Drawing with one used on Digest 175 page 7.34. 2nd VERSION: Table 11.18: Moved highlighted line and put below the last KAL line and before the first MAL line.

Feb-11

11 11-12 Corrections/Revisions For all items crossed off below insert "Not Available" Deleted Handle Accessories Table. Feb-11

11 11-13 Corrections/Revisions Delted 15 A, 50 A rows from 1st table. Feb-11

11 11-14 Corrections/Revisions Added new table and narrative from SD 3-19. 2nd Version: Table 11.30: removed 50 A row. Feb-11

11 11-15 Corrections/Revisions Interrupting Ratings Table: Deleted KGL Column Feb-11

11 11-16 Corrections/RevisionsDeleted entire page as it is now obsolete. 2nd Version: Table 11.39: 200 A Row: Changed 5760.00 to Not Available.

Feb-11

11 11-20 Corrections/Revisions replaced entire page with information from Supplemental Section 3-10. Feb-11

11 11-21 Corrections/Revisions replaced entire page with information from Supplemental Section 3-11. Feb-11

11 11-22 Corrections/Revisions replaced entire page with information from Supplemental Section 3-12. Feb-11

11 11-23 Corrections/Revisions replaced entire page with information from Supplemental Section 3-13. Feb-11

11 11-24 Corrections/Revisions replaced entire page with information from Supplemental Section 3-27. Feb-11

11 11-25 Corrections/Revisions replaced entire page with information from Supplemental Section 3-29 & 3-30. Feb-11

11 11-26 Corrections/Revisions replaced entire page with information from Supplemental Section 3-31 Feb-11

Section Number Page Number Reason for Change Specific Changes Made Change Date

Page 17: Digest Changes and Updates - 2011 - Schneider Electricstatic.schneider-electric.us/assets/digest/digest-175-updates.pdf · Digest Changes and Updates - 2011 Digest 175 Sections Revised

© 2010 Schneider ElectricAll Rights Reserved

17

www.schneider-electric.us

11 11-27 Corrections/Revisions

1. Circuit breaker frame changed to: Circuit breaker fixed or drawout. 2nd frame. Added text above 1st table: Fixed and Drawout breakers listed below are complete with STR58U Trip unit which includes Long time, short time, instantaneous and ground fault as well as options T (residual) and I (ammeter). Changed table head "Drawout with Cradle 3P" to Drawout without Cradle 3P. Changed table head "Drawout with Cradle 4P" to Cradle Only 3P. Column 1: changed MP08 to MP63 TO: MP16 to MP30. Replace the 9 catalog number not highlighted with the following starting with the 3 fixed: MP100135; MP100137; MP100139; Drawout: MP100136; MP100138; MP100140; Cradle only: MP100141; MP100133; MP100132. 2nd VERSION: Switched 11-27 & 11-28, also deleted several rows from Table, leaving only 9 items.

Feb-11

11 11-28 Corrections/RevisionsDeleted entire page & added left column info from SD 3-33 and all info from 3-34. 2nd VERSION: Switched with page 11-27.

Feb-11

11 11-29 Corrections/Revisions

1st table: Deleted STR 18M, STR 28D & STR 38S. For STR58U Deleted the 3 prices.Starting where the price of 7338.00 made one long box with the following: Includes Residual Type - T and Ammeter - I. Under STR58U: Deleted STR58UP and added several rows. 2nd Table: Deleted Several rows.

Feb-11

11 11-30 Corrections/Revisions

1st Table deleted the following rows: 250 A, 400 A, 600 A, 1000 A, 1600 A, 2500 A, 3000 A, 3200 A, 4000 A & 5000 A. Changed 685518 to 54422; 685524 to 54426;685525 to 54427. 2nd Table deleted Sealable Cover, Test Kit & Mini Test info. Under Power Supply Module: deleted 125 Vdc row, changed 120 Vac row to 10 Vac, Changed 685823 to 54440; 685824 to 54441; 685825 to 54442; 685826 to 54443; 685827 to 54444; 685831 to 54446. 2nd VERSION: Table 11.85: Changed 685831 to 54446 in last row.

Feb-11

11 11-31 Corrections/Revisions

1st Table: deleted the following rows: 100, 380/415, 440/480, 30, 60, 125, 350, 277, 30, 60, 125, 250, 100, 440/480, MNRI=MNR, 250/277, 100/125, 200/250 & Mechanical Operation Counter. Change 685654CC and ST to 54449; 685650CC and ST to 54495; 685652CC and ST to 54497; 685658CC and ST to 54503; 685659CC and ST to 54504; 685686 to 54481; 685675 to 54470; 685679 to 54474; 685683 to 54478; 685690 to 544486; 685692 to 54488; 685762 to 54512; 685763 to 54513; 685769 to 54518; 685761 to 54511. 2nd VERSION: Table 11.86: Changed 685654CC and ST to 54449; 685658CC and ST to 54503; 685659CC and ST to 54504; 544486 to 54486 & deleted 3 rows.

Feb-11

11 11-32 Corrections/RevisionsChanged 685725 to 54525; 685727 to 54528; 685732 to 54536; 685730 to 54533. Deleted several rows.

Feb-11

11 11-33 Corrections/Revisions

Changed 685977 to 54590; 685978 to 54591 & deleted several rows. 2nd VERSION: Moved 54107(2) and footnote over 1 column to the left. Then inserted in the price column 3489.00.

Feb-11

11 11-34 Corrections/Revisions Change 685980 to 54594, deleted several rows & discount schedule. Feb-11

11 11-35 Corrections/Revisions Changed 685875 to 54063, deleted several rows. Feb-1111 11-36 Corrections/Revisions Changed 685915 to 54107, deleted several rows. Feb-11

13 13-2 correctionsTable 13.1, deleted footnote and symbols; other revisions to table.. Table 13.2, deleted footnote and symbols; other revisions to table..

Jun-09

13 13-9 part number revision In NQOD Merchandised Example changed NQOD430L225 to NQOD430L225CU Jun-09

13 13-10 revision

Changed footnote 1 under table 13.20 from “CU suffix indicates copper bussing.” to “CU suffix indicates copper bussing. NQOD RTI interiors with aluminum bus are no longer available. Order the copper bussed equivalent with a “CU” suffix when ordering a replacement interior.”.

Jun-09

13 13-11 revision

Changed footnote 1 under table 13.22 from “CU suffix indicates copper bussing.” to “CU suffix indicates copper bussing. NQOD RTI interiors with aluminum bus are no longer available. Order the copper bussed equivalent with a “CU” suffix when ordering a replacement interior.”.

Jun-09

13 13-12 revision

Changed footnote 1 under tables 13.24 and 13.25 from “CU suffix indicates copper bussing.” to “CU suffix indicates copper bussing. NQOD RTI interiors with aluminum bus are no longer available. Order the copper bussed equivalent with a “CU” suffix when ordering a replacement interior.”.

Jun-09

13 13-13 revision

Changed footnote 1 under tables 13.27 and 13.28 from “CU suffix indicates copper bussing.” to “CU suffix indicates copper bussing. NQOD RTI interiors with aluminum bus are no longer available. Order the copper bussed equivalent with a “CU” suffix when ordering a replacement interior.”.

Jun-09

14 14-2 correction Updated all table numbers. Jul-09

Section Number Page Number Reason for Change Specific Changes Made Change Date