digital chlorine meter operation and troubleshooting · digital chlorine meter operation and...
TRANSCRIPT
![Page 1: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/1.jpg)
Digital Chlorine Meter Operation and Troubleshooting
Clean and Safe Drinking Water Workshop 2010 Gander, NLIan Thompson, Atlantic Purification Systems Ltd.
![Page 2: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/2.jpg)
OUTLINE
Chlorine Chemistry
Various Testing Devices
Colorimetry and Reagents Explained
Pocket Colorimeter I and II Overview
Low Range Free Chlorine Test
![Page 3: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/3.jpg)
OUTLINE
Low Range Total Chlorine and High Range Testing Differences
Result and Unit Verification
Error Messages and Troubleshooting
![Page 4: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/4.jpg)
Chlorine Chemistry
![Page 5: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/5.jpg)
Chlorine Chemistry
Chlorine is added to water as chlorine gas or as sodium or calcium hypochlorite.
-OH HOCl Na O2H NaOCl
-Cl H HOCl O2H 2Cl
Chlorine Gas:
Sodium Hypochlorite:
![Page 6: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/6.jpg)
Chlorine Chemistry
The two chemical species formed by chlorine in water are hypochlorous acid and hypochlorite ion
-OCl H HOCl Hypochlorous Acid Hypochlorite Ion
![Page 7: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/7.jpg)
Chlorine Chemistry
Hypochlorous acid is the stronger disinfectant
Below pH 7.5 free chlorine exists predominantly in the HOCl form
Above pH 7.5 free chlorine exists predominantly in the OCl- form
pH 7.5HOClHOCl OClOCl--
![Page 8: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/8.jpg)
Chlorine Chemistry & Disinfection Efficiency:Chlorine Chemistry & Disinfection Efficiency:
Free Chlorination:Free Chlorination:ClCl22 + H+ H22 O O HOClHOCl + + OClOCl-- (strongest)(strongest)
ChloraminationChloramination::NHClNHCl22 + + HOClHOCl HH22 O + NClO + NCl33
NHNH22 Cl + Cl + HOClHOCl HH22 0 + NHCl0 + NHCl22
NHNH33 + + HOClHOCl HH22 0 + NH0 + NH22 ClCl
Organic Amines:Organic Amines:Org N + Org N + HOClHOCl OrgNOrgN--ClCl (~none)(~none)
decreasing decreasing disinfection disinfection efficiencyefficiency
![Page 9: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/9.jpg)
Various Options for Manually Measuring Chlorine in Water
![Page 10: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/10.jpg)
Measuring Devices
Test Strips
Easiest to Use
Not very accurate
DPD pillow instead
![Page 11: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/11.jpg)
Measuring Devices
Colour Comparison Kit
Accurate to 0.1mg/L
Affected by light
Operators see different readings
![Page 12: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/12.jpg)
Measuring Devices
Titrations (Digital Amperometic Analysis)
Very Accurate, (ppb)
Relatively Expensive
Effluent Discharge to sensitive areas
![Page 13: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/13.jpg)
Measuring Devices
Digital Colorimetry
Accurate to 0.01mg/L
Easy to use
Waterproof
Low cost per unit test
![Page 14: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/14.jpg)
How do Colorimeters Read a Sample?
![Page 15: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/15.jpg)
Lamp Monochromator or Filter
Lens Sample Detector
Basic ColorimeterBasic Colorimeter
![Page 16: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/16.jpg)
Colorimetry Explained
(ZERO) Measure the amount of light passing through the untreated sample.
(READ) Measure the amount of light passing through the reacted sample.
Convert the difference in transmitted light into a concentration, using the built-in calibration curve.
![Page 17: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/17.jpg)
Light Source
Detector% Transmittance Absorbance
100
10
0.00
1.00
“ZERO”
60 0.22“READ”
40 0.40“READ”
“READ”
(Abs = -log T)
![Page 18: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/18.jpg)
Absorbance
Concentration (m
g/L) 0.88
1.60
4.00
0.22 0.40 1.00
Slope or gain of
calibration
![Page 19: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/19.jpg)
Reagents
Convenient reagent packaging
Permachem foil pouches
Originally “Powder Pillows”
AccuVac vials
SwifTest(TM) Dispenser
![Page 20: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/20.jpg)
What do the Reagents Do?
Reagents + Sample
Colored Complex
![Page 21: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/21.jpg)
How to Make Menu Changes on Pocket Colorimeters
![Page 22: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/22.jpg)
Pocket Colorimeter I
Two Ranges LO = 0-2.00, HI = 0-4.5 mg/L
Switching Ranges
Retrieving Factory Default Calibration
![Page 23: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/23.jpg)
Pocket Colorimeter I
Switching Ranges
Hold ZERO and READ key, after 1 sec release ZERO key
HI or LO will show range instrument is in
Repeat above steps to switch ranges
![Page 24: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/24.jpg)
Pocket Colorimeter I
Retrieving Factory Default Calibration
Hold ZERO and READ for 3 secs
CAL then flashing 0 is displayed
Press READ and hold for 2 secs until dFL is displayed
![Page 25: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/25.jpg)
Pocket Colorimeter II
Two Ranges LO = 0- 2.00, HI = 0-8.0 mg/L
Switching Ranges
Retrieving Factory Default Calibration
![Page 26: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/26.jpg)
Pocket Colorimeter II
Switching Ranges
Press MENU key
Display will show SEL
Use READ key to toggle between LR and HR
Press MENU key to accept
![Page 27: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/27.jpg)
Pocket Colorimeter II
Retrieving Factory Default Calibration
Hold MENU key until USER then CAL appears
Press ZERO to find dFL
Press READ to restore factory calibration
![Page 28: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/28.jpg)
How To Run a Proper Test For Low Range Free Chlorine
![Page 29: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/29.jpg)
Good laboratory Practice
Measuring Hints
Analyze immediately after collection
Avoid Plastic containers
Dedicate different sample cells for Free and for Total Chlorine testing.
If chlorine concentration is less than 2 mg/L use the Low Range setting and procedure.
![Page 30: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/30.jpg)
Good laboratory Practice
Measuring Hints
Pretreat glassware by soaking in a dilute bleach solution (1 mL commercial bleach to 1 Liter of D.I. Water for at least one hour.)
Thorough rinsing after each use allows for only occasional pre- treatment.
Air dry the sample cells and sampling containers.
![Page 31: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/31.jpg)
Good laboratory Practice
Measuring Hints
If sample turns yellow or shows a flash of pink then goes colorless, dilute the sample and repeat the test.
Multiply the result by the dilution factor.
![Page 32: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/32.jpg)
Sample Collection, Storage and Preservation
Collect sample by allowing water to flow for at least 3 - 5 minutes
If collecting bulk sample, allow container to overflow with the sample several times
Cap the sample container so there is no headspace
If transport is absolutely necessary (which is not recommended), chill the sample to 4 degrees C and analyze as quickly as possible.
![Page 33: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/33.jpg)
Sampling and Sample Preservation
The sample is usually the greatest limiting factor in obtaining a true or representative result.
![Page 34: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/34.jpg)
Running the Test
Following the proper sampling techniques, fill the GLASS cell to the 10mL mark and cap it
Dry outside of cell with a wipe
Place cell in holder (diamond forward), cover with the instrument cap and hit ZERO
0.00 will be displayed, remove cell
![Page 35: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/35.jpg)
Running the Test
Add a 10mL DPD Free reagent to the sample, as indicated in the procedure, cap and gently invert for 20 secs
![Page 36: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/36.jpg)
Reaction Chemistry Free Chlorine
Free chlorine oxidizes DPD indicator at a pH of 6.3-6.6 to form a magenta-colored compound.
Free Cl2 + DPD magenta colored compound.
Reaction time of < 1:00 minute --- No Longer
![Page 37: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/37.jpg)
Running the Test
Place cell in holder, cover with instrument cap and hit READ
The free chlorine result will be displayed in mg/L chlorine
![Page 38: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/38.jpg)
Low Range Total Chlorine and High Range Tests
![Page 39: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/39.jpg)
Reaction Chemistry Total Chlorine
Free Chlorine reaction + Potassium Iodide is added to the reagents.
Chloramines oxidize iodide to iodine which, along with free chlorine, oxidizes DPD to form pink color.Free Chlorine + Chloramines + KI + DPD magenta-
colored compound.
• Reaction time > 3:00 minutes Not longer than 6 minutes
![Page 40: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/40.jpg)
High Range Tests
Put PCI or PCII into HR mode
Use PLASTIC cells and 2 X 10mL DPD reagents
PCI uses 10mL of sample
PCII uses 5mL of sample
Short pathway faces front to back
![Page 41: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/41.jpg)
Low Range Total and High Range Tests
Procedure is the same for all tests
Only changes are cells, sample volume (PCII), reagent addition (2 pillows), cell orientation
Free – Within 1 min
Total – Between 3 and 6 min
![Page 42: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/42.jpg)
How Do I Know if my Results are Correct?
![Page 43: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/43.jpg)
Use of Standards
What is a standard?
Primary Standard is a solution of D.I. water containing a known amount of a specific substance
Secondary Standards (SpecCheck)
![Page 44: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/44.jpg)
Use of Standards
Primary Chlorine Standard
Primary Standard used with PC comes as a higher concentration (typically from 25- 30mg/L)
Standards are manufactured highly concentrated as weaker chlorine solutions are not stable for long periods
Primary standards can be used for calibration verification, instrument performance, operator technique, interfering substances
![Page 45: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/45.jpg)
Use of Standards
Primary Standard Additions
Smaller volumes of highly concentrated solutions
Identifying interferences and percent recovery
Is my sample compatible with the test?
Use to prepare a known concentration for any purpose.
![Page 46: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/46.jpg)
Use of Standards
Secondary SpecCheck Standards
Gel standards that simulate specific chlorine values (Secondary Standards)
Used as a calibration check only
Cannot be used to calibrate an instrument
![Page 47: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/47.jpg)
Errors and Troubleshooting
![Page 48: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/48.jpg)
Common Errors and Interferences
E1, E2 and E3 Errors
Verify instrument cap is seated correctly and re-zero
Check to make sure LED lights up when READ is pressed
Change batteries
E2 on PCI often means interference filter should be replaced – no longer any available
![Page 49: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/49.jpg)
Common Errors and Interferences
All other “E” Errors
Factory default calibration curve has been changed
Follow procedure to retrieve factory calibration
If error persists, unit requires servicing
![Page 50: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/50.jpg)
Common Errors and Interferences
Flashing Values
Flashing 0.00 – Check cap/re-zero
Flashing number above stated range – Check for light blockage and/or dilute then retest
Flashing square on PCII – instrument has not been zeroed properly
![Page 51: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/51.jpg)
Common Errors and Interferences
Common Interferences - Manganese
Add 3 drops of Potassium Iodide, mix and wait one minute
Add 3 drops of Sodium Arsenite mix a run test as per procedure
Subtract this result from original analysis to obtain correct chlorine concentration
![Page 52: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/52.jpg)
Common Errors and Interferences
Common Interferences - Monochloramine
See a gradual drift towards higher readings.
Try to analyze sample as soon as possible after adding reagent
3.0 mg/L monochlor will increase chlorine result by 0.1mg/L after 1 min
![Page 53: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/53.jpg)
Common Errors and Interferences
Common Interferences – All other oxidants
Oxidants such as bromine, ozone and iodine will cause false positives for chlorine readings
![Page 54: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/54.jpg)
Common Errors and Interferences
Other Possible Interference Solutions
FreeChlor F Reagent Solution used to determine free chlorine in the presence of manganese, chloramines and other oxidants.
At moment, can only be used with Monochloramine test
![Page 55: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/55.jpg)
OUTLINE
Chlorine Chemistry
Various Testing Devices
Colorimetry and Reagents Explained
Pocket Colorimeter I and II Overview
Low Range Free Chlorine Test
![Page 56: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/56.jpg)
OUTLINE
Low Range Total Chlorine and High Range Testing Differences
Result and Unit Verification
Error Messages and Troubleshooting
![Page 57: Digital Chlorine Meter Operation and Troubleshooting · Digital Chlorine Meter Operation and Troubleshooting Clean and Safe Drinking Water Workshop 2010 Gander, NL Ian Thompson, Atlantic](https://reader031.vdocuments.net/reader031/viewer/2022013002/5cfc10d188c99363568e08b7/html5/thumbnails/57.jpg)
Digital Chlorine Meter Operation and Troubleshooting
QUESTIONS????????