digital color dome cameradl.owneriq.net/a/a3fa100e-de8d-4e67-8ec4-83f06106931c.pdf · do not...
TRANSCRIPT
EN
G
DIGITAL COLOR DOME CAMERAuser manual
SCC-B5396SCC-B5398
imagine the possibilitiesThank you for purchasing this Samsung product.To receive more complete service,please register your product at
www.samsungsecurity.com
EN
GFR
EG
ERS
PA
ITA
2 – DIGITAL COLOR DOME CAMERA
CAUTION
RISK OF ELECTRIC SHOCK.DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates that dangerous voltage consisting a risk of electric shock is
present within this unit.
This exclamation point symbol is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the
appliance.
WARNINGTo prevent damage which may result in fi re or electric shock hazard, do not expose this appliance to rain
or moisture.
WARNING
Be sure to use only the standard adapter that is specifi ed in the specifi cation sheet. Using any other adapter
could cause fi re, electrical shock, or damage to the product
Incorrectly connecting the power supply or replacing battery may cause explosion, fi re, electric shock, or
damage to the product.
Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause abnormal heat
generation or fi re.
Securely plug the power cord into the power receptacle. Insecure connection may cause fi re.
When installing the camera, fasten it securely and fi rmly. A falling camera may cause personal injury.
Do not place conductive objects (e.g. screwdrivers, coins, metal things, etc.) or containers fi lled with water
on top of the camera. Doing so may cause personal injury due to fi re, electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fi re or electric shock.
•
1.
2.
3.
4.
5.
6.
7.
Safety information
CA
8.
9.
10
1.
2.
3.
4.
5.
6.
7.
8.
9.
English – 3
EN
G
S
nt
er
Safety informationIf any unusual smells or smoke come from the unit, stop using the product. In such case, immediately
disconnect the power source and contact the service center. Continued use in such a condition may cause
fi re or electric shock.
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify
this product in any way. (SAMSUNG is not liable for problems caused by unauthorized modifi cations or
attempted repair.)
When cleaning, do not spray water directly onto parts of the product. Doing so may cause fi re or electric shock.
CAUTION
Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to
excessive vibrationor magnetic interference.
Do not install in a location subject to high temperature (over 50°C), low temperature (below -10°C), or high
humidity. Doing so may cause fi re or electric shock.
If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall
it.
Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fi re or
damage to the product.
Keep out of direct sunlight and heat radiation sources. It may cause fi re.
Install it in a place with good ventilation.
Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the
CCD image sensor.
Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases,
shall be placed on the apparatus.
The Mains plug is used as a disconnect device and shall stay readily operable at any time.
8.
9.
10.
1.
2.
3.
4.
5.
6.
7.
8.
9.
4 – DIGITAL COLOR DOME CAMERA
Important Safety InstructionsWARNING
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, or other apparatus (including
amplifi ers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide
blade or the third prong is provided for your safety. If the provided plug does not fi t into your outlet, consult
an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
Only use attachments/accessories specifi ed by the manufacturer.
Use only with cart, stand, tripod, bracket, or table specifi ed by the manufacturer, or
sold with the apparatus.
Unplug this apparatus when a card is used. Use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been
damaged in any way, such as powersupply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
s
English – 5
EN
G
s
e
nd
ve
or
Contents Introduction
Features 6
Product & Accessories 7
Part Names and Functions 8
Installation
s Installation procedure 11
Adjusting the camera direction 12
How to use OSD Menu
Using Icons in the Menu 14
Main Menu 14
Profi le 15
Camera Setup 17
Intelligence 24
Privacy Zone Setup 27
Other Set 28
System Information 29
Language 29
Specifi cations
Specifi cations 30
6 – DIGITAL COLOR DOME CAMERA
IntroductionFEATURES
High Resolution
This camera has realized high resolution of 600 lines using the top-notch full digital image processing and special algorithm technologies.
Intelligent Motion Detection & Tracking
This is an intelligent function that automatically detects a motion of an object. You can set a virtual fence so it displays an alert if an object passes / enters /exits the virtual fence or virtual area.
XDR (eXtended Dynamic Range)
Actively controls the gamma compensation in the way it operates the ambient luminance contrast in a certain pixel unit to determine the optimal visibility.
High Sensitivity
It implements images of high sensitivity using the up-to-date SONY Super-HAD IT CCD..
Low Illumination
It uses the digital signal technologies such as low illumination and Day/Night functions that make your camera identify objects even in the worst environment.
Superior Backlight Adjustment
When an object has a bright illumination or sunlight behind it, this camera automatically improves the shaded object picture quality.
Digital Power Synchronization
The full digital Line Lock function directly adjusts the vertical camera synchronization to enhance the operationability and reliability of this camera.
Output Signal Setting
You can set the following Video output signals: Image reversion (Horizontal, Vertical, or both), Privacy, Horizontal/Vertical profi ling, and digital zooming.
OSD(On Screen Display) Menu
OSD menu is provided to display the status of camera and to confi gure the functions interactively.
❖
•
❖
•
❖
•
❖
•
❖
•
❖
•
❖
•
❖
•
❖
•
C
Coaxial Cable Communication
This is a remote control function that overlaps the coaxial cable (for a transfer of the video signal) with the
control signal. In installation or repair, this helps you control the communication controller (optional) without
additional cabling.
❖
•
English – 7
EN
G
IntroductionComponents Checking components in the package
Camera Test Monitor Cable User’s Guide
Image Part name Standard Quantity Usage
Plastic anchor HUD 5 4 (EA) Attach each piece to screw connection holes for strengthening connection
ASSY screw machine
BH M5 X L6. (White+o-ring) 8 Used for fi lling in the holes when installing
pipe and wall mount
ASSY screw tapping
TH M4xL30 (Black+o-ring) 4 Used when installing your camera on the
ceiling or wall。
L-Wrench TROX T-20 1 Used for assembling/disassembling the Dome cover
Template 1 Used for guiding the installation
Gasket-pipe hole T2.5 W56 1 Used to make a wiring hole when installing the camera on the ceiling or wall
NOTE
The test monitor cable is used to test the camera by connecting to a portable display. If you really want to connect the camera to a monitoring display, use the BNC cable.。
–
–
–
8 – DIGITAL COLOR DOME CAMERA
Introduction❖
•
1
2 4
Lens
9 10
11
3
8
12 Video connectorPower connector
5
6 6
7
7
1.Dome cover: Covers the inner cover, lens, and main body to protect them.
2.Cover screw: Use it to assemble or disassemble both dome cover and case. 3.Inner cover: Covers the main body to protect it.4.Wing locker: Push a long thin screwdriver into its narrow spot and press it outward when you want to remove the inner cover.5.Main body: Includes a lens, a switch board, a PCB board, screws, and such. 6.Screws for assembly and disassembly: Using these 2 screws, the Main body is closely connected to the Case.7.Hooker: By pulling the left/right levers in the arrow direction, the Main body can be detached from the Case.8.Case: Used as a ceiling or wall fi xture. It is fi xed using four screws provided in the package.9.Zoom lever: Using this lever, the lens zoom can be adjusted and fi xed. 10.Focus lever: Using this lever, the lens focus can be adjusted and fi xed.
11.Tilt fi xing screw: Using this screw, the slope of the lens can be adjusted and fi xed.
12.Cable: Connect the Video connector to BNC cable and Power connector to power adapter.
Components of your camera
Your camera has the following components:
English – 9
EN
G
IntroductionSetting switches❖
SETUP Switch
This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the
MAIN MENU appears.
(Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the
displayed value.
(Up/Down) : By pressing this switch up or down, you can move up or down on the menu.
: When you press this switch in the menu, the selected function is confi rmed. To enter a submenu, press
this button..
•
10 – DIGITAL COLOR DOME CAMERA
Installation
C
B
A
Bottom of camera
Installing cameraBefore installation
Before installing your camera, you have to read the following cautions: You have to check whether the location (ceiling or wall) can bear fi ve times the weight of your camera. Don’t let the cable to be caught in improper place or the electric line cover to be damaged. Otherwise it may cause a breakdown or fi re. You can use wall mount adaptor (SADT-102WM), and pole mount adaptor (SADT-100PM) for installing the camera on the wall or pipeline. When installing your camera, don’t allow any person to approach the installation site. If you have any valuable things under the place, move them away.
About the installation holes
A:Use these holes when directly installing your camera on the ceiling or wall.
While those are not used, fi ll in the holes using the screw machine (M5 X L6.) for waterproofi ng.B: Use four holes when directly installing your camera on the junction box
You can use the 4 1/8 diameter round type junction box for assembly. (The junction box, gasket, and cover are separately purchased items.)C: Use these holes when installing the wall mount adapter (SADT-102WM)
While those are not used, fi ll in the holes using the screw machine (M5 X L6.) for waterproofi ng.
The holes that are not used should be tightly sealed up us ing the screws prov ided for waterproofi ng. When the screws don’t have rubber rings inside or are not closely attached, note that it can cause waterproofi ng problem.F o r a t t a c h i n g s c r e w s , s e e p a g e 1 6 “Disassembling/assembling the Main body from the Case.”
Ba
To1.
2
English – 11
EN
G
InstallationnInstalling on a pipe
Before installation, you have to be familiar with the above cautions and fi ll in the holes that are not used for installation.
To install your camera bottom on a pipe1. After connecting the power and video cables,
throw them inside the pipeline and screw the male thread pipe into the female pipe thread in your camera tightly to fix the Main body. (In this case, be sure to tape with Tefl on tape before assembly for waterproofi ng. Be careful for the wiring cable not to be stuck in the connection area.)
2. Adjust the angle of the camera in search of a better view. 1) Separate the Dome cover using the L-Wrench
provided. (To make loose the screws, rotate counterclockwise.)
2) Adjust the lens direction. For more information, see page 17 “Adjusting the camera direction.”
3. Attach the Dome cover. (Screw the connection bolts tightly using the L-Wrench for waterproofi ng.)
To change the SAMSUNG logo position, move the location of the connection rubber band as show below and rotate for assembly. (The rotation limit is 180 degree.)
12 – DIGITAL COLOR DOME CAMERA
InstallationAdjusting the camera directionWhen the camera is fi xed on the ceiling, you can adjust the camera viewing angle. You can rotate your camera leftward or rightward (Panning), and can change the slope of your camera upward or downward (Tilting). In case of panning, the rotation limit of your camera is set to 355 degree (100 degree clockwise and 255 degree counterclockwise). The rotation is stopped by the Stopper inside of the camera. For panning control, fi rst unfasten two screws located on the bottom and rotate in the direction you want, and then fasten them to fi x the camera. In case of tilting, you can change the slope of your camera from zero to 90 degree. However if the slope angle is under 17 degree, you can encounter a partial image hide problem. To fi x the location after adjusting the tilting angle, use the Tilt fi xing screws. To adjust the focus and zoom of your camera, use the Zoom lever and Focus lever. When you install the camera on the inclined ceiling or wall, you can rotate the camera lens to see a correct direction image.
U
•
•
•
•
•
H
Panning
Tilting
Lens rotation
English – 13
EN
G
e. e
0 by ws to
e. e g
us e
USING ICONS IN THE MENU
� (EXIT)
Exits the menu setting.
Before you exits the menu setting, select SAVE to
save your settings, or select QUIT to cancel.
� (RET)
Returns to the previous menu.
� (HOME)
Returns to the main menu.
� (SAVE)
Used to save your settings of MASK AREA,
PRIVACY ZONE and more.
Once you save your settings, they will remain
even if you select QUIT in the menu.
� (DEL)
Used to deletes your settings of MASK AREA,
PRIVACY ZONE and more.
Once you delete your settings, they will not be
restored even if you select QUIT in the menu.
•
•
•
•
•
MAIN MENU
MAIN MENU
PROFILE�CAMERA SET�INTELLIGENCE�PRIVACY ZONE�OTHER SET�SYSTEM INFO�LANGUAGE�
�
PROFILE
You can set a mode according to the camera
installation conditions.
CAMERA SET
Confi gure Camera related functions and data.
INTELLIGENCE
You can confi gure the settings of motion
detection, tracking and more.
PRIVACY ZONE
You can confi gure the privacy related settings.
OTHER SET
You can confi gure for Factory Defaults, and more.
SYSTEM INFO.
Displays the system information including the
camera version and communication settings.
LANGUAGE
Select a preferred one from the supported
languages.
•
•
•
•
•
•
•
How to use OSD Menu
14 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuPROFILE
PROFILE
STANDARDITS
BACKLIGHTDAY/NIGHTGAMINGCUSTOM
� �
In the PROFILE menu, you can confi gure the following camera settings at once.
CAMERA SET Menu
STANDARD ITS BACKLIGHT DAY/NIGHT GAMINGPrevious
MenuSub-menus
IRIS ALC ALC ALC ALC ALC
ALC - - - - -
LENS DC DC DC DC DC
LEVEL 0 0 0 0 0
BACKLIGHT OFF OFF BLC OFF OFF
MOTION (F.FAST)--- (F.FAST)--- NORM (F.FAST)--- SLOW
DNR MID MID MID MID MID
SHUTTER OFF AUTO1/250 OFF OFF OFF
SENS-UP AUTOx4 AUTOx2 AUTOx4 AUTOx4 AUTOx4
XDR MID MID MID MID MID
DAY/
NIGHTAUTO AUTO DAY AUTO DAY
NIGHT - - - - -
BURST OFF ON OFF OFF OFF
❖
❖
❖
❖
English – 15
EN
G
How to use OSD MenuCAMERA SET Menu
STANDARD ITS BACKLIGHT DAY/NIGHT GAMINGPrevious
MenuSub-menus
WHITE
BALDAY DAY/NIGHT DAY DAY/NIGHT DAY
DAY - - - - -
MODE ATW2 ATW1 ATW1 ATW1 ATW1
RED 0 0 0 0 0
BLUE 0 0 0 0 0
NIGHT - - - - -
BRIGHTNESSUser setting
allowedMID
User setting
allowedMID
User setting
allowed
MODE OFF ATW2 OFF ATW2 OFF
REDUser setting
allowed0
User setting
allowed0
User setting
allowed
BLUEUser setting
allowed0
User setting
allowed0
User setting
allowed
DETAIL 2 2 2 2 2
ITS
It will be set automatically so you can easily check the traffi c conditions.
BACKLIGHT
It will be set automatically so you can distinguish the object from the background in a severe backlighting scene.
DAY/NIGHT
It will be set automatically so it optimizes to the day or night conditions, respectively.
GAMING
It will be set automatically to help you take a picture in a regular indoor lighting condition.
❖
❖
❖
❖
16 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuCAMERA SETUP
CAMERA SET
CAMERA ID OFFIRIS ALC�MOTION (F.FAST)---DNR MIDSHUTTER OFFSENS-UP AUTO X4FLICKERLESS (OFF)---XDR MID� �
DAY/NIGHT AUTO�WHITE BAL �DIGITAL ZOOM OFFDETAIL [2]V-SYNC INTAGC COLOR SUP LOWREVERSE H/VPOSI/NEGA +PIP OFF� �
DIS OFF
� �
Setup the general functions of zoom camera module.
Use the switch to select a menu item.
CAMERA ID [OFF, ON]
CAMERA ID
ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789 :?-+*()/
SP SP LOCATION�CAMERA-1.............................................
� � �
The CAMERA ID menu is used for you to assign
a unique name to a camera. If you press the
SETUP switch with the CAMERA ID menu
selected, you will see the appropriate screen.
You can enter up to 54 alphanumeric or
special characters for the CAMERA ID. Select
LOCATION and press the SETUP switch to
move the display position of the CAMERA ID.
IRIS [ALC]
The IRIS menu is used if you want to adjust the
intensity of radiation incoming to the camera.
ALC (Automatic Light Control)
① If you press the SETUP switch with an ALC-
based sub menu selected, you will see the
appropriate screen.
❖
❖
•
English – 17
EN
G
How to use OSD Menu.
n
-
ALC
LEVEL [00]----I----BACKLIGHT OFF
� � �
The LEVEL menu is used to adjust the
overall brightness, where “+” will increase the
brightness and “–” will decrease it.
② If you set the BACKLIGHT option to BLC,
you will see a menu where you can set the
BLC area.
you can set the desired BLC zone by defi ning
the size and location.
ALC
LEVEL [00]----I----BACKLIGHT BLC AREA USER <SIZE>� <LOCATION>�
� � �
If you use an ordinary camera in a scene
with an intensive backlight, the object will be
displayed dark on the monitor affected by the
backlight. To solve this problem, you can use
the BLC(Back Light Compensation) function
to improve the sharpness of the image in
such a high contrast scene.
AGC
[OFF, VERY LOW, LOW, MID, HIGH, VERY
HIGH, USER, FIX]
The AGC (Auto Gain Control) menu is used to
set the AGC level of the camera. When the AGC
is active, the camera automatically increases the
sensitivity by amplifying the Video signal when
the strength of the signal falls below the normal
value.
If OFF or FIX mode is selected in the SENS-UP
menu, you can specify the AGC level.
If you press the SETUP switch with a USER
sub menu selected, you will see the appropriate
screen.
AGC USER
LEVEL [16]
� � �
In USER mode, you can break down the level in
16 steps from VERY LOW to VERY HIGH to your
preference.
❖
18 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuAGC FIX
LEVEL [01]
� � �
If you press the SETUP switch with a FIX sub
menu selected, you will see the appropriate screen.
As a fi xed value of the AGC gain is used in FIX
mode, you can select one of the 16 detailed levels
from VERY LOW to VERY HIGH before fi xing it.
Note :
If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu will be deactivated.
If FLICKERLESS is set to ON, the AGC FIX mode will be disabled.
MOTION [S.SLOW, SLOW, NORM, FAST, F.FAST]
The MOTION menu is used to adjust the strength
of the AGC level for a control of the camera motion.
This is available only if the SENS-UP menu is set
to AUTO.
You can select one from S.SLOW, SLOW, NORM,
FAST and F.FAST for the AGC level.
If you monitor a fast moving object in a low contrast
scene, select F.FAST while select S.SLOW for a
hardly moving object in the same lighting condition.
–
–
❖
Note :
If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the MOTION menu will be deactivated.
DNR [OFF,LOW,MID,HIGH, USER(1~16)]
You can confi gure the DNR (Digital Noise
Reduction) related settings.
Reduces the noise on the screen.
This is especially useful for a severely distorted screen.
You can set the level if you set DNR to USER.
SHUTTER
[OFF, AUTO 1/100(PAL:1/120), AUTO 1/250,
AUTO 1/500, AUTO 1/1000, AUTO 1/2000, AUTO
1/4000, AUTO 1/10K , 1/100(PAL:1/120), 1/250,
1/500, 1/1000, 1/2000, 1/4000, 1/10K]
The SHUTTER menu is used to confi gure settings
of the fi xed / auto high-speed electronic shutter.
You can select one of 7 options from 1/100(PAL:1/120)
to 1/10K for the fi xed high speed electronic shutter,
which is mostly used for imaging a fast moving object.
The auto high speed electronic shutter operates
as the fi xed high speed shutter in a high contrast
scene but automatically focuses the target if the
iris opens fully in a low contrast scene like in ELC
mode. When it gets brighter back, the mode will
switch to the fi xed high speed electronic shutter
mode.
However, the auto high speed shutter operates
properly only in a camera featuring a DC or VIDEO
lens.
–
❖
❖
❖
English – 19
EN
G
How to use OSD Menu
en.
O
s
0)
.
O
Note :
If the SENS-UP function is set to AUTO, only items of OFF and AUTO are available in the SHUTTER menu.
If the SENS-UP mode is set to FIX, the SHUTTER menu will be deactivated.
If the FLICKERLESS function is set to ON, the SHUTTER menu will be deactivated.
SENS-UP
[OFF, AUTO X2, AUTO X4, AUTO X6, AUTO
X8, AUTO X12, AUTO X16, AUTO X24, AUTO
X32, AUTO X48, AUTO X64, AUTO X96, AUTO
X128, AUTO X256, AUTO X512, FIX X2, FIX
X4, FIX X6, FIX X8, FIX X12, FIX X16, FIX X24,
FIX X32, FIX X48, FIX X64, FIX X96, FIX X128,
FIX X256, FIX X512]
Automatically detects the ambient level of
darkness in the dark or low contrast scene to
extend the accumulated time, keeping the image
bright and sharp; It can be also used as FIX
mode.
Note :
If the SHUTTER menu is set to fi xed electronic shutter mode, the SENS-UP menu will not be available.
If FLICKERLESS is set to ON, the FIX mode of the SENS-UP menu will be disabled.
If the SHUTTER menu is set to AUTO, the SENS-UP menu can be set to either OFF or AUTO mode.
–
–
–
❖
–
–
–
FLICKERLESS [OFF, ON]
If set to ON, the shutter speed will be fi xed to
1/100(PAL:1/120) second. This will prevent possible screen
distortion due to a mismatch between the vertical sync
frequency and the blinking frequency of the lighting.
Note :
If the SHUTTER menu is set to AUTO or FIX mode, the FLICKERLESS menu will not be available.
If the SENS-UP function is set to FIX mode, the Flickerless menu will be deactivated.
If AGC is set to FIX mode, the FLICKERLESS function will be disabled.
XDR (eXtended Dynamic Range)
[OFF, LOW, MID, HIGH]
Actively controls the gamma compensation in the
way it operates the ambient luminance contrast
in a certain pixel unit to determine the optimal
visibility.
Select one from OFF, LOW, MID and HIGH.
Closing to HIGH will increase the compensation
level.
DAY/NIGHT [DAY,NIGHT,AUTO,EXT]
DAY
If set to DAY, it will be fi xed to DAY mode
regardless of the ambient conditions.
NIGHT
If set to NIGHT, it will be fi xed to Black-and-White
mode regardless of the ambient conditions.
❖
–
–
–
❖
❖
•
•
20 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuIf you press the SETUP switch with a NIGHT sub
menu selected, you will see a menu where you can
set Burst to OFF/ON.
If BURST is set to ON, the Burst signal will output
together with the black-and-white composite video
signal. If BURST is set to OFF, the Burst signal does
not output.
You can set the BURST option to OFF/ON, or
select to output the Burst signal in NIGHT mode.
AUTO
The camera will automatically switch between
DAY and NIGHT mode, according to the lighting
condition.
If you press the SETUP switch with an AUTO-
based sub menu selected, you will see the
appropriate screen.
AUTO
BURST OFFDAY NIGHT BRIGHTNESS MID DWELL TIME 2SNIGHT DAY BRIGHTNESS MID DWELL TIME 5SMASK AREA 1 2
� � �
You can set the BURST option to OFF/ON, or
select to output the Burst signal in NIGHT mode.
The BRIGHTNESS of DAY NIGHT sets the
brightness degree of color to BW switching,
•
for which you can select from LOW, MID, and
HIGH. As you adjust it from HIGH to LOW, the
screen switches to black and white mode under
the darker situation.
DWELL TIME of DAY NIGHT sets the time to
maintain switched black and white mode.
The BRIGHTNESS of NIGHT DAY sets the
brightness degree of BW to color switching,
for which you can select from LOW, MID, and
HIGH. As you adjust it from HIGH to LOW, the
screen switches to color mode under the darker
situation.
DWELL TIME of NIGHT DAY sets the time to
maintain switched color mode.
The MASK AREA menu is used to prevent
unintended mode switching or inability of
determining the switching due to existence of
high spot light source at night.
If you press the SETUP switch in item 1 or 2 of
the MASK AREA menu, you will see a menu
where you can specify an area to MASK.
MASK AREA
<SIZE> � <LOCATION>�
� � � � �
❖
•
English – 21
EN
G
How to use OSD Menu
r
o
r
o
You can specify MASK 1 and 2 simultaneously.
The MASK is only for determining the mode
switching, and any excessive bright area at night
will be excluded by the confi gured MASK.
Note :
If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
WHITE BAL [DAY/NIGHT]
If you want to adjust the color scheme, use the
WHITE BALANCE function.
DAY
In DAY mode, you can set the color values of
RED and BLUE. The screen will be displayed in
colors according to your settings.
WHITE BAL
DAY/NIGHT DAY MODE AWC� RED [00]----I---- BLUE [00]----I---- R-GAIN [0248] B-GAIN [0247]
� � �
Note :
You can set the values of R-GAIN and B-GAIN only in AWC mode.
–
❖
•
–
NIGHT
Use the NIGHT mode if you want to set the white
balance differently according to the ambient
luminance.
If the NIGHT mode is set to OFF, the white
balance will always operate as set in DAY mode;
if not to OFF, the camera will switch to as set in
DAY/NIGHT mode according to the brightness.
In NIGHT mode, you can set the values of RED,
BLUE and BRIGHTNESS. The screen will be
displayed in colors according to your settings.
WHITE BAL
DAY/NIGHT NIGHTBRIGHTNESS MIDMODE AWC� RED [00]----I---- BLUE [00]----I---- R-GAIN [0248] B-GAIN [0247]
� � �
Note :
You can set the values of R-GAIN and B-GAIN only in AWC mode.
If AGC is set to OFF or FIX, you can not access the NIGHT menu.
For adjusting the white balance, the following
5 modes are provided:
•
–
–
–
22 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuATW1(Auto Tracing White Balance mode
1): The camera can automatically adjust the
color temperature in real time, according to
the ambient conditions. The color temperature
ranges from approx. 2500K to 9300K.
ATW2: The color temperature ranges from
approx. 2,000K to 10,000K.
AWC ( Auto White Balance Control): If you
press the SETUP switch in the appropriate item
position, Auto White Balance will perform once.
3200K : Set color temperature to 3200K
5600K : Set color temperature to 5600K
RED : Adjusts the strength of the red color.
BLUE : Adjusts the strength of the blue color.
R-GAIN/B-GAIN : Enables you to set the current
color temperature manually.
BRIGHTNESS : Select a brightness level in
switching from setting in DAY mode to setting in
NIGHT mode.
DIGITAL ZOOM [ON/OFF]
You can set the digital zoom factor and position.
If you press the SETUP switch with the DIGITAL
ZOOM function set to ON, you will see the
appropriate screen.
When the zoom factor and position are defi ned,
the digital zoom function will operate.
•
•
•
•
•
–
–
–
–
❖
DIGITAL ZOOM
RATIO [X1.0]< LOCATION > �
� � �
- LOCATION : If you press the SETUP switch in the
condition where the image is enlarged as much as the
ratio setting, you can watch an invisible area of the
effective screen as well using the switch.
Note :
If the digital zoom factor is set to larger than 1x, the FENCE function will be deactivated.The DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration of the quality.
DETAIL [0~3]
Controls the horizontal or vertical distinction.
V-SYNC [INT, LINE]
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal
synchronization.
If selecting LINE, the camera will use the external
power source frequency for the synchronization.
You can adjust the LL-PHASE.
–
❖
❖
❖
❖
❖
❖
❖
English – 23
EN
G
How to use OSD Menu
an
al
al
.
Note :
Use of DC 12V will fi x V-SYNC to INT, which can not be changed.
AGC COLOR SUP [LOW , MID, HIGH]
Adjust the color scheme according to the AGC
value.
REVERSE [OFF, H, V, H/V]
Mirrors video signals horizontally, vertically, or
both.
POSI/NEGA [+, -]
Output as it is or mirror the video brightness
signal.
PIP [OFF, ON]
Displays a sub image together with the main
image on the same screen using the Picture In
Picture function.
Note :
If more than one privacy zone is set and the PRIVACY SET is set to ON, the PIP function will be deactivated.
If the INTELLIGENCE function is set to FENCE mode, the PIP menu will be deactivated.
DIS [OFF, ON]
Digital Image Stabilization will set the anti-shake
compensation.
–
❖
❖
❖
❖
–
–
❖
Note :
If you set DIS to ON, the compensation area will be enlarged as set in the digital zoom factor.If you set the digital zoom factor to greater than the enlarged zoom factor for the compensation, the DIS function will be deactivated.
INTELLIGENCE
INTELLIGENCE
MOTION OFFADVANCED OFFMASK AREA 1 2 3 4DISPLAY ONSENSITIVITY [4]RESOLUTION [5]
� �
You can set the motion detection and tracking in the
INTELLIGENCE menu.
MOTION [OFF,TRACKING,DETECTION]
TRACKING
Detects and tracks a moving object.
DETECTION
Detects a moving object.
Note :
If it is set to DETECTION, you can not set such functions as FIXED/MOVED and FENCE in the ADVANCED menu.
–
❖
•
•
–
24 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuADVANCED [OFF, FIXED/MOVED, FENCE]
Detects a motion of an object and displays an
image of any moving object before tracking the
moving route.
FENCE
This is to detect if a moving object passes
through the specifi ed LINE or AREA.
In a condition where a moving object is detected
in an analysis of the previous and current frames
whose movement overlaps a certain area, the
system displays “PASS” if the object’s center line
passes through the line while it displays “ENTER”
or “EXIT” if the center point passes through the
area.
FENCE
LINE OFFAREA OFF
� � �
You can set the position and detection direction of the
LINE, and the size and position of the AREA.
❖
•
- How to set the line
LINE
PIXEL LEVEL [4]<POINT>�DIRECTION
� � �
① If you press the SETUP switch with the LINE
option set to ON, you can specify the position
and detection direction of the line.
② If you change the PIXEL LEVEL for setting
the position, specify the pixel that moves by a
single pressure of the switch.
③ In <POINT>, you can specify the fi rst position of
the line by pressing the SETUP switch once, and
the second position by pressing the switch again.
Use the switch to specify the
position.
Set each position of the two points and press the
SETUP switch to complete the positioning.
④ If you change the DIRECTION, you can specify
the detection direction. The detection direction
based on the defi ned two points will be
displayed on the screen.
English – 25
EN
G
How to use OSD Menu
E
on
a
f
d
n.
e
fy
n
- How to set the area
AREA
PIXEL LEVEL [4]<SIZE> � <LOCATION>�
� � �
① If you press the SETUP switch with the AREA
option set to ON, you can specify the position
and size of the area.
② If you change the PIXEL LEVEL for setting
the position, specify the pixel that moves by a
single pressure of the switch.
③ In <SIZE>, press the SETUP switch and use
the switch to adjust the size.
Press the SETUP switch again to complete the
sizing.
④ In <LOCATION>, press the SETUP switch and
use the switch to specify the position.
Press the SETUP switch again to complete
the positioning.
Note :
If you set the LINE of the FENCE to ON, PRIVACY 12 will not be available.Functions of FENCE, PIP, DIS and DIGITAL ZOOM (if the digital zoom factor is set to larger than 1x) can not be
–
used simultaneously.
In the boundary of the defi ned AREA and LINE, a FENCE detection error may occur if two or more moving objects overlap with each other or one object separates in multiple directions.
FIXED/MOVED
If an object on the screen suddenly disappears or
an object comes out of nowhere and stays for a
certain time, the area will be displayed.
A detection (FIXED/MOVED) error may occur if :
- multiple motions occur continuously in random
directions
- a fi xed object moves in one position continuously
- a second object screens the fi rst moving object
MASK AREA [1~4]
Specify a detection exception area to mask.
Select a mask number and specify the size and
position.
MASK AREA
<SIZE> � <LOCATION>�
� � � � �
–
•
❖
26 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuDISPLAY [ON, OFF]
With the DISPLAY option set to ON, a motion or
a set ADVANCED function will be displayed on
the screen, if detected.
SENSITIVITY [1~7]
Set the sensitivity of the motion detection.
RESOLUTION [1~5]
If setting it to high, the camera can detect even a
trivial movement of the target.
PRIVACY ZONE SETUP
PRIVACY ZONE
1 2 3 4 5 6 7 8 9 10 11 12
PRIVACY SET ONSTYLE MOSAIC1
� �
The PRIVACY function will protect your privacy by
screening the privacy area that you have specifi ed
during monitoring. You can specify up to 12 privacy
zones.
❖
❖
❖
If you set the PRIVACY SET to ON, your PRIVACY
ZONE settings will be applied.
You can change the style to adjust the mosaic size
and color of the PRIVACY ZONE.
PRIVACY ZONE
1 2 3 4 5 6 7 8 9 10 11 12
PRIVACY SET ONSTYLE COLOR Y-LEVEL [128] RED [128] BLUE [128]� �
Use the switch to select one from
PRIVACY 1 through 12.
Select one from PRIVACY 1~12 and press the
SETUP switch to confi rm your setting. You can
specify a pixel that moves as you change the PIXEL
LEVEL to set the position.
PRIVACY ZONE SET1
PIXEL LEVEL [4]<POINT>� <POSITION>�
� � � � �
English – 27
EN
G
How to use OSD Menu
L
- How to set the point
You can set each position of the 4 points.
① If you press the SETUP switch in <POINT>,
you will see the points available in the
PRIVACY ZONE. Each time you press the
SETUP switch, the points available will move.
② Use the switch to set the position
of each point. Set each position of the four
points and press the SETUP switch to
complete the positioning.
- How to set the position
You can move the position of the overall area.
① By pressing the SETUP switch in
<POSITION>, you can move the overall
position of the privacy zone.
② Use the switch to move the
position and press the SETUP switch to
confi rm it.
Note :
If more than one PRIVACY ZONE is specifi ed and the PRIVACY SET is set to ON, the PIP function will be deactivated.
If the 12th PRIVACY ZONE is specifi ed, the LINE function of FENCE will be deactivated.
–
–
OTHER SET
OTHER SET
FACTORY DEFAULTS �OSD COLOR BW
� �
FACTORY DEFAULTS
All the settings will be restored to the factory
default.
OSD COLOR [BW, R/G/B]
You can set the OSD(On-screen Display) color to
COLOR or B/W.
❖
❖
28 – DIGITAL COLOR DOME CAMERA
How to use OSD MenuSYSTEM INFORMATION
SYSTEM INFO
TYPE 3_VAR_NOR_PSERIAL NO. 000000000000000CAMERA VER. 0.50_090101
� �
You can check the system information such as
SERIAL NO and CAMERA VER.
LANGUAGE
LANGUAGE
ENGLISHFRANÇAISDEUTSCHESPAÑOLITALIANO
� �
The camera supports 5 different languages.
Select a preferred language.
Initial Confi guration Table
Camera Confi guration•
CAMERA ID OFF
IRIS ALC
AGC VERY HIGH
MOTION (F.FAST)
DNR MID
SHUTTER OFF
SENS-UP AUTO x4
FLICKERLESS (OFF)
XDR MID
DAY/NIGHT AUTO
DIGITAL ZOOM OFF
DETAIL [2]
AGC COLOR SUP MID
REVERSE H/V
POSI/NEGA +
PIP OFF
DIS OFF
V-SYNC INT
❖
SS
English – 29
EN
G
Specifi cationsSPECIFICATIONS
Items Sub-items SCC-B5396N/SCC-B5398NCamera Type CCTV Camera
ImageDevice 1/3” Super-HAD IT CCD
PixelsTotal 811 x 508
Effective 768 x 494
Scanning
System Interlace
Scanning Line 525 lines
Frame 30frame/1sec
Horizontal Frequency
Internal Mode 15,734 Hz
Line-lock Mode 15,750 Hz
Vertical Frequency
Internal Mode 59.94 Hz
Line-lock Mode 60 Hz
Min. Scene Illumination
Condition Min. Scene illumination
Sens-up F No. Level DAY NIGHT
OFF 1.2 50 IRE 0.4 Lux 0.4 Lux
OFF 1.2 30 IRE 0.24 Lux 0.24 Lux
OFF 1.2 15 IRE 0.12 Lux 0.12 Lux
512 times 1.2 50 IRE 0.0008 Lux 0.0008 Lux
512 times 1.2 30 IRE 0.0005 Lux 0.0005 Lux
512 times 1.2 15 IRE 0.00023 Lux 0.00023 Lux
Functions
Number of Privacy Zone 12 (Polygonal Method)
Day/Night DAY/NIGHT/AUTO/EXT
Motion Detection OFF/Tracking/Detection
eXtended Dynamic Range(XDR) Off/On (Level Setting)
D-Zoom x1 ~ x16 (x0.1 STEP)
PIP Off/On
High Speed Shutter 1/60 ~ 1/10Ksec (OSD/External Control)
Flickerless Off/On
Sens-Up x2 ~ x512
BLC Off/On (Area Setting)
30 – DIGITAL COLOR DOME CAMERA
Specifi cationsItems Sub-items SCC-B5396N/SCC-B5398N
AGC Off/On (Max.Level Setting)
Line Lock Off/On (Phase Control)
Camera ID Off/On (Max.54ea/2Line)
White Balance ATW1/ATW2/AWC/3200K/5600K
Digital Noise Reduction(DNR) Off/On (Adaptive 3D+2D)
Digital Image Stabilization(DIS) Off/On
Intelligent Video Fixed/Moved, Fence
Etc. Function Detail, Reverse(H/V), Posi/Nega
ResolutionHorizontal 600 TV Lines
Vertical 350 TV Lines
Video Output - VBS 1.0Vp-p, 75 Ω
S/N Ratio S/N Ratio Approx. 52dB
Lens Lens Drive TypeAuto Iris (DC) SCC-B5396 : focal length = 2.5 to 6.0mm / Aperture ratio = F 1.2SCC-B5398 : focal length = 2.8 to 11.0mm / Aperture ratio = F 1.2
PAN Range 0 ~ 355°(100° in CW(Clockwise) direction, 255° in CCW (Counterclockwise) direction)
TILT Range 0 ~ 90°RemoteControl Coaxitron (Data On Coax cable) Yes (with SCX-RD100)
EnvironmentalConditions
Operating Temperature -10˚C ~ +50˚C
Humidity Less than 90%
PowerPower Requirement
AC24V ± 10%(60Hz ± 0.3Hz)DC12V ± 10%
Power Consumption 2.3W
PhysicalSpecifi cation
Dimensions (Ø x H) 150(Ø) x 121(H)mm
Weight 980 g
Color white
English – 31
EN
G
Specifi cations
Items Sub-items SCC-B5398P/SCC-B5396PCamera Type CCTV Camera
ImageDevice 1/3” Super-HAD IT CCD
PixelsTotal 795 x 596
Effective 752 x 582
Scanning
System Interlace
Scanning Line 625 lines
Frame 25frame/1sec
Horizontal Frequency
Internal Mode 15,625 Hz
Line-lock Mode 15,625 Hz
Vertical Frequency
Internal Mode 50 Hz
Line-lock Mode 50 Hz
Min. Scene Illumination
Condition Min. Scene illumination
Sens-up F No. Level DAY NIGHT
OFF 1.2 50 IRE 0.4 Lux 0.4 Lux
OFF 1.2 30 IRE 0.24 Lux 0.24 Lux
OFF 1.2 15 IRE 0.12 Lux 0.12 Lux
512 times 1.2 50 IRE 0.0008 Lux 0.0008 Lux
512 times 1.2 30 IRE 0.0005 Lux 0.0005 Lux
512 times 1.2 15 IRE 0.00023 Lux 0.00023 Lux
Functions
Number of Privacy Zone 12 (Polygonal Method)
Day/Night DAY/NIGHT/AUTO/EXT
Motion Detection OFF/Tracking/Detection
eXtended Dynamic Range(XDR) Off/On (Level Setting)
D-Zoom Max. x16
PIP Off/On
High Speed Shutter 1/50 ~ 1/10Ksec (OSD/External Control)
Flickerless Off/On
Sens-Up x2 ~ x512
BLC Off/On (Area Setting)
32 – DIGITAL COLOR DOME CAMERA
Specifi cationsItems Sub-items SCC-B5398P/SCC-B5396P
AGC Off/On (Max.Level Setting)
Line Lock Off/On (Phase Control)
Camera ID Off/On (Max.54ea/2Line)
White Balance ATW1/ATW2/AWC/3200K/5600K
Digital Noise Reduction(DNR) Off/On (Adaptive 3D+2D)
Digital Image Stabilization(DIS) Off/On
Intelligent Video Fixed/Moved, Fence
Etc. Function Detail, Reverse(H/V), Posi/Nega
ResolutionHorizontal 600 TV Lines
Vertical 350 TV Lines
Video Output - VBS 1.0Vp-p, 75 Ω
S/N Ratio S/N Ratio Approx. 52dB
Lens Lens Drive TypeAuto Iris (DC) SCC-B5396 : focal length = 2.5 to 6.0mm / Aperture ratio = F 1.2SCC-B5398 : focal length = 2.8 to 11.0mm / Aperture ratio = F 1.2
PAN Range 0 ~ 355°(100° in CW(Clockwise) direction, 255° in CCW (Counterclockwise) direction)
TILT Range 0 ~ 90°RemoteControl Coaxitron (Data On Coax cable) Yes (with SCX-RD100)
EnvironmentalConditions
Operating Temperature -10˚C ~ +50˚C
Humidity Less than 90%
PowerPower Requirement
AC24V ± 10%(50Hz ± 0.3Hz)DC12V ± 10%
Power Consumption 2.3W
PhysicalSpecifi cation
Dimensions (Ø x H) 150(Ø) x 121(H)mm
Weight 980g
Color white
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its electronic accessories
(e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their
working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
please separate these items from other types of waste and recycle them responsibly to promote the sustainable
reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.