direct coupled actuators - xonet
TRANSCRIPT
Direct CoupledActuatorsDuraDriveFor the full range of HVAC applications
Make the most of your energy
2
Direct Coupled Actuators
DuraDrive Spring-Return Direct Coupled ActuatorsWe offer a complete line of direct coupled actuators for all your spring return actuator needs.
Direct coupled easy to install, spring return DuraDrive actuators are available with torques that range from 30 to 150 lb-in for two position, floating or proportional control.
Value-Driven General Purpose Applications
Damp and Harsh Environment Applications
High Performance HVAC Applications
30 lb-in Mx4D series
30 lb-in Mx4D series direct coupled for up to ½” shafts, NEMA 2, 10’ plenum rated cable
standard, accepts ½” conduit connector, convenient manual override, two position, floating or
proportional control.
150 lb-in Mx40-71xx series
150 lb-in Mx40-71xx series direct coupled standard mounting to ½” shafts with optional mounting to
1”. A premier oil immersed gear train actuator for long dependable service with a heavy duty NEMA 4
housing, 3’ cable, accepts ½” conduit connector, CW or CCW spring return mounting.
35 lb-in Mx40 series
35 lb-in Mx40-704x series direct coupled standard mounting to ½” shafts with optional mounting to
¾” shafts. NEMA 2, optional built in auxiliary switches, CW or CCW spring return mounting, 3’ cable,
accepts ½” conduit connector, two position, floating or proportional control.
60 lb-in/133 lb-in Mx41-7xxx series
60 lb-in/133 lb-in Mx41-7xxx series direct coupled standard mounting to ¾” shafts with optional
mounting to 1”. NEMA 2, optional built in auxiliary switches, CW or CCW spring return mounting, 3’
cable, accepts ½” conduit connector, convenient manual override, multiple accessories available,
two position, floating or proportional control.
Direct Coupled Actuators
3
Value-Driven General Purpose ApplicationsPart Number Torque
lb-in (NM)
Spring Return
Actuator Inputs Outputs Approximate Timing in seconds @ 70°FControl Voltage VA @
60HzFeedback Auxiliary
SwitchPowered Spring Return
MA4D-7033-100 30 (3.4) CCW 2 Position 24 vac/dc 5.1 — No 56 23
MA4D-7030-000 30 (3.4) CCW 2 Position 120 vac 7.8 — No 56 23
MA4D-7031-000 30 (3.4) CCW 2 Position 230 vac 7.2 — No 56 23
MA4D-8033-100 30 (3.4) CW 2 Position 24 vac/dc 5.1 — No 56 23
MA4D-8030-000 30 (3.4) CW 2 Position 120 vac 7.8 — No 56 23
MA4D-8031-000 30 (3.4) CW 2 Position 230 vac 7.2 — No 56 23
MF4D-7033-100 30 (3.4) CCW Floating 24 vac/dc 6.8 2-10 vdc No 85 21
MF4D-8033-100 30 (3.4) CW Floating 24 vac/dc 6.8 2-10 vdc No 85 21
MS4D-7033-100 30 (3.4) CCW 2-10 vdc 24 vac/dc 6.1 2-10 vdc No 85 21
MS4D-7033-130 30 (3.4) CCW 6-9 vdc 24 vac/dc 6.1 6-9 vdc No 85 21
MS4D-7033-150 30 (3.4) CCW 0-10 vdc 24 vac/dc 6.1 0-10 vdc No 85 21
MS4D-7033-160 30 (3.4) CCW 4-20 ma 24 vac/dc 6.1 2-10 vdc No 85 21
MS4D-8033-100 30 (3.4) CW 2-10 vdc 24 vac/dc 6.1 2-10 vdc No 85 21
MS4D-8033-130 30 (3.4) CW 6-9 vdc 24 vac/dc 6.1 6-9 vdc No 85 21
MS4D-8033-150 30 (3.4) CW 0-10 vdc 24 vac/dc 6.1 0-10 vdc No 85 21
MS4D-8033-160 30 (3.4) CW 4-20 ma 24 vac/dc 6.1 2-10 vdc No 85 21
Spring Return Damper Actuators
Mx4D-703x and Mx4D-803x Series 30 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require fail safe return, with two
position, floating or proportional control.
Features • NEMA 2 and Plenum rated
• 10’ plenum cable (24V Models), 3’ appliance wires for 120/230 vac models
• ½” conduit connection or seal tight
• Overload protected throughout stroke
• 93° nominal rotation
• Automatically adjust input span to match damper travel
• Manual override
• UL-873, cUL C22-2, CE, C-Tick
• Operating Temperature –22 to 140°F (–30 to 60°C)
• Humidity 15 to 95% non-condensing
4
Direct Coupled Actuators
High Performance HVAC ApplicationsPart Number Torque
lb-in (NM)
Spring Return
Actuator Inputs Outputs Approximate Timing in seconds @ 70°FControl Voltage VA @
60HzFeedback Auxiliary
SwitchPowered Spring Return
MA40-7040 35 (4) CW/CCW 2 Position 120 vac 4.3 — — <50 <28
MA40-7040-501 35 (4) CW/CCW 2 Position 120 vac 4.3 — 1-SPDT <50 <28
MA40-7041 35 (4) CW/CCW 2 Position 230 vac 4.6 — — <50 <28
MA40-7041-501 35 (4) CW/CCW 2 Position 230 vac 4.6 — 1-SPDT <50 <28
MA40-7043 35 (4) CW/CCW 2 Position 24 vac/dc 4.4 — — <50 <28
MA40-7043-501 35 (4) CW/CCW 2 Position 24 vac/dc 4.4 — 1-SPDT <50 <28
MF40-7043 35 (4) CW/CCW Floating 24 vac/dc 5.9 — — <130 <25
MF40-7043-501 35 (4) CW/CCW Floating 24 vac/dc 5.9 — 1-SPDT <130 <25
MS40-7043 35 (4) CW/CCW 2-10 vdc 24 vac/dc 5.9 2-10 vdc — <130 <25
MS40-7043-501 35 (4) CW/CCW 2-10 vdc 24 vac/dc 5.9 2-10 vdc 1-SPDT <130 <25
Spring Return Damper Actuators
Mx40-704x Series 35 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require fail safe return, with two
position, floating or proportional control.
Features • NEMA 2 and Plenum rated
• ½” conduit connection or seal tight
• 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models
• Overload protected throughout stroke
• 95° nominal rotation
• Automatically adjust input span to match damper travel
• UL-873, cUL C22-2, CE, C-Tick
• Operating Temperature –22 to 140°F (–30 to 60°C)
• Humidity 15 to 95% non-condensing
Direct Coupled Actuators
5
High Performance HVAC ApplicationsPart Number Torque
lb-in (NM)
Spring Return
Actuator Inputs Outputs Approximate Timing in seconds @ 70°FControl Voltage VA @
60HzFeedback Auxiliary
SwitchPowered Spring Return
MA41-7070 60 (7) CW/CCW 2 Position 120 vac 5.6 — — <80 <40
MA41-7070-502 60 (7) CW/CCW 2 Position 120 vac 5.6 — 2-SPDT <80 <40
MA41-7071 60 (7) CW/CCW 2 Position 230 vac 8.0 — — <80 <40
MA41-7071-502 60 (7) CW/CCW 2 Position 230 vac 8.0 — 2-SPDT <80 <40
MA41-7073 60 (7) CW/CCW 2 Position 24 vac/dc 4.8 — — <80 <40
MA41-7073-502 60 (7) CW/CCW 2 Position 24 vac/dc 4.8 — 2-SPDT <80 <40
MA41-7150 133 (15) CW/CCW 2 Position 120 vac 10.0 — — <190 <30
MA41-7150-502 133 (15) CW/CCW 2 Position 120 vac 10.0 — 2-SPDT <190 <30
MA41-7151 133 (15) CW/CCW 2 Position 230 vac 10.6 — — <190 <30
MA41-7151-502 133 (15) CW/CCW 2 Position 230 vac 10.6 — 2-SPDT <190 <30
MA41-7153 133 (15) CW/CCW 2 Position 24 vac/dc 9.7 — — <190 <30
MA41-7153-502 133 (15) CW/CCW 2 Position 24 vac/dc 9.7 — 2-SPDT <190 <30
MF41-7073 60 (7) CW/CCW Floating 24 vac/dc 6.2 — — <195 <30
MF41-7073-502 60 (7) CW/CCW Floating 24 vac/dc 6.2 — 2-SPDT <195 <30
MF41-7153 133 (15) CW/CCW Floating 24 vac/dc 9.7 — — <190 <30
MF41-7153-502 133 (15) CW/CCW Floating 24 vac/dc 9.7 — 2-SPDT <190 <30
MS41-7073 60 (7) CW/CCW 2-10vdc 24 vac/dc 5.8 2-10 vdc — <195 <30
MS41-7073-502 60 (7) CW/CCW 2-10vdc 24 vac/dc 5.8 2-10 vdc 2-SPDT <195 <30
MS41-7153 133 (15) CW/CCW 2-10vdc 24 vac/dc 9.7 2-10 vdc <190 <30
MS41-7153-502 133 (15) CW/CCW 2-10vdc 24 vac/dc 9.7 2-10 vdc <190 <30
Spring Return Damper Actuators
Mx41-7xxx Series 60 lb-in and 133 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require fail safe return, with two
position, floating or proportional control.
Features • NEMA 1 and 2 rated models
• ½” conduit connection or seal tight
• 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models
• Overload protected throughout stroke
• 95° nominal rotation
• Automatically adjust input span to match damper travel
• Tandem mounting
• Manual override
• Reverse action switch (MS41 models)
• UL-873, cUL C22-2, CE, C-Tick
• Operating Temperature –40 to 160°F (–40 to 71°C)
• Humidity 15 to 95% non-condensing
6
Direct Coupled Actuators
Damp & Harsh Environment ApplicationsPart Number Torque
lb-in (NM)
Spring Return
Actuator Inputs Outputs Approximate Timing in seconds @ 70°FControl Voltage VA @
60HzFeedback Auxiliary
SwitchPowered Spring Return
MA40-7170 150 (17) 120 vac 8.4 —
MA40-7171 150 (17) CW/CCW 2 Position 240 vac 9.8 — No 162 82
MA40-7173 150 (17) 24 vac/dc 7.4 —
MF40-7173 150 (17) CW/CCW Floating 24 vac/dc 8.1 — No 162 82
MS40-7170 150 (17) CW/CCW 2-10 vdc 240 vac 8.5 2-10 vdc No 147 65
MS40-7171 150 (17) CW/CCW 2-10 vdc 240 vac 10.8 2-10 vdc No 147 65
MS40-7173 150 (17) CW/CCW 2-10 vdc 24 vac/dc 7.8 2-10 vdc No 147 65
Spring Return Damper Actuators
Mx40-717x Series 150 lb-in Direct Coupled
Designed for controlling air dampers in building systems that require fail safe position. With two
position, floating or proportional control.
Features • Premier oil immersed gear train construction
• NEMA 4 capable
• ½” conduit connections
• 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models
• Tandem mounting
• Overload protected throughout stroke
• 93° nominal rotation
• UL-873, cUL C22-2, CE, C-Tick
• Operating Temperature –25 to 140°F ( –32 to 60°C)
• Humidity 15 to 95% non-condensing
Direct Coupled Actuators
7
DuraDrive Non Spring Return Direct Coupled ActuatorsWe offer a complete line of direct coupled actuators for all your non spring return actuator needs.
Direct coupled easy to install, non spring return DuraDrive actuators are available with torque ranges from 35 to 300 lb-in for floating or proportional control.
Economical Floating Applications
Value-Driven General Purpose Applications
Damp and Harsh Environment Applications
High Performance HVAC Applications
35 lb-in or 70 lb-in MF4E series
35 lb-in or 70 lb-in MF4E series direct coupled to ½” shafts, NEMA 1, floating control, 10’ plenum
cable standard, manual override.
35 lb-in or 70 lb-in Mx4D-60xx series
35 lb-in or 70 lb-in Mx4D-60xx series direct coupled up to ½” shafts, NEMA 2, 10’ plenum rated cable,
accepts ½” conduit connector, convenient manual override, two position, floating or proportional
control models.
300 lb-in Mx41-63xx series
300 lb-in Mx41-63xx series direct couple standard mounting to ½” shafts with optional mounting
to 1”, manual override, premier oil immersed gear train actuator for long dependable service with
a heavy duty NEMA 4 housing, 3’ cable, accepts ½” conduit connector, two position, floating or
proportional control.
35 lb-in or 70 lb-in Mx41-60xx series
35 lb-in or 70 lb-in Mx41-60xx series direct coupled standard mounting to 5/8” shafts, NEMA 2,
manual override, 3’ plemun rated cable, optional ½” conduit connection, optional built in auxiliary
switches, two position, floating or proportional control.
133 lb-in Mx41-61xx series
133 lb-in Mx41-61xx series direct coupled up to ¾” shafts, NEMA 1, manual override, 3’ cable,
accepts ½” conduit connector, optional auxiliary switch, two position, floating or proportional control.
8
Direct Coupled Actuators
Economical Floating ApplicationsPart Number Torque
lb-in (NM)Actuator Inputs Outputs Approximate Timing in sec. @ 70°FControl Voltage VA @ 60Hz Feedback Auxiliary Switch Spring Return
MF4E-60430-100 35 (4) Floating 24 vac 2 No 90
MF4E-60830-100 70 (8) Floating 24 vac 2 No 90
Non Spring Return Damper Actuators
Mx4E-60x30 Series 35 lb-in and 70 lb-in Direct Coupled
Designed for controlling air dampers in building systems with floating control.
Features • Adjustable stroke limits
• NEMA 1 and Plenum rated
• 10’ plenum cable with strain relief
• Overload protected throughout stroke
• 95° nominal rotation
• Manual override
• UL-873, cUL C22-2, CE, C-Tick
• Operating Temperature –22 to 140°F (–30 to 60°C)
• Humidity 15 to 95% non-condensing
Direct Coupled Actuators
9
Value-Driven General Purpose ApplicationsPart Number Torque
lb-in (NM)Actuator Inputs Outputs Approximate Timing in sec. @ 70°FControl Voltage VA @ 60Hz Feedback Auxiliary Switch Spring Return
MF4D-6043-100 35 (4) Floating 24 vac/dc 4.4 2-10 vdc No 85
MF4D-6083-100 70 (8) Floating 24 vac/dc 5.9 2-10 vdc No 85
MS4D-6043-100 35 (4) 2-10 vdc 24 vac/dc 4.2 2-10 vdc No 85
MS4D-6043-130 35 (4) 6-9 vdc 24 vac/dc 4.2 6-9 vdc No 85
MS4D-6043-150 35 (4) 0-10 vdc 24 vac/dc 4.2 0-10 vdc No 85
MS4D-6043-160 35 (4) 4-20 ma 24 vac/dc 4.2 2-10 vdc No 85
MS4D-6083-100 70 (8) 2-10 vdc 24 vac/dc 5.2 2-10 vdc No 85
MS4D-6083-130 70 (8) 6-9 vdc 24 vac/dc 5.2 6-9 vdc No 85
MS4D-6083-150 70 (8) 0-10 vdc 24 vac/dc 5.2 0-10 vdc No 85
MS4D-6083-160 70 (8) 4-20 ma 24 vac/dc 5.2 2-10 vdc No 85
Non Spring Return Damper Actuators
Mx4D-60x3 Series 35 lb-in and 70 lb-in Direct Coupled
Designed for controlling air dampers in building systems with floating or proportional control.
Features • NEMA 2 and Plenum rated
• 10’ plenum cable
• ½” conduit connection or seal tight
• Overload protected throughout stroke
• 93° nominal rotation
• Automatically adjust input span to match damper travel
• Manual override
• UL-873, cUL C22-2, CE, C-Tick
• Operating Temperature –22 to 140°F (–30 to 60°C)
• Humidity 15 to 95% non-condensing
10
Direct Coupled Actuators
High Performance HVAC ApplicationsPart Number Torque
lb-in (NM)Actuator Inputs Outputs Approximate Timing in sec. @ 70°FControl Voltage VA @ 60Hz Feedback Auxiliary Switch Spring Return
MF41-6043 35 (4) Floating 24 vac 2.3 — — 90
MF41-6043-510 35 (4) Floating 24 vac 2.3 1000 ohm — 90
MF41-6043-502 35 (4) Floating 24 vac 2.3 — 2-SPDT 90
MF41-6083 70 (8) Floating 24 vac 2.3 — — 125
MF41-6083-510 70 (8) Floating 24 vac 2.3 1000 ohm — 125
MF41-6083-502 70 (8) Floating 24 vac 2.3 — 2-SPDT 125
MS41-6043 35 (4) 0-10 vdc 24 vac 3.3 0-10 vdc — 90
MS41-6043-520 70 (8) 0-10 vdc* 24 vac 3.3 0-10 vdc — 90
MS41-6043-502 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc 2-SPDT 90
MS41-6083 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc — 125
MS41-6083-520 70 (8) 0-10 vdc* 24 vac 3.3 0-10 vdc — 125
MS41-6083-502 70 (8) 0-10 vdc 24 vac 3.3 0-10 vdc 2-SPDT 125
* Adjustable
Non Spring Return Damper Actuators
Mx41-60x3 Series 35 lb-in and 70 lb-in Direct Coupled
Designed for controlling air dampers in building systems with floating or proportional control.
Features • Compact Design
• NEMA 2 and Plenum rated
• Automatically adjust input span to match damper travel
• 3’ plenum cable
• Overload protected throughout stroke
• 95° nominal rotation
• Manual override
• Auxiliary Switches Optional
• Adjustable zero and span model available
• UL-873, cUL C22-2, CE
• Operating Temperature –25 to 130°F ( –32 to 55°C)
• Humidity 15 to 95% non-condensing
Direct Coupled Actuators
11
High Performance HVAC ApplicationsPart Number Torque
lb-in (NM)Actuator Inputs Outputs Approximate Timing in sec. @ 70°FControl Voltage VA @ 60Hz Feedback Auxiliary Switch Spring Return
MF41-6153 133 (15) Floating 24 vac 3 — — 125
MS41-6153 133 (15) 0-10 vdc 24 vac 5 0-10 vdc — 125
MS41-6153-502 133 (15) 0-10 vdc 24 vac 5 0-10 vdc 2-SPDT 125
Non Spring Return Damper Actuators
Mx41-6153 Series 133 lb-in Direct Coupled
Designed for controlling air dampers in building systems with floating or proportional control.
Features • NEMA 1
• Span adjust Function Switch
• 0-10 vdc (factory set), 2-10 input switch or floating control
• 3’ plenum cable
• Overload protected throughout stroke
• Tandem mounting
• 95° nominal rotation
• Manual override
• ½” conduit connection
• Auxiliary Switches Optional
• UL-873, cUL C22-2, CE
• Operating Temperature –25 to 130°F ( –32 to 55°C)
• Humidity 15 to 95% non-condensing
12
Direct Coupled Actuators
Damp & Harsh Environment ApplicationsPart Number Torque
lb-in (NM)Actuator Inputs Outputs Approximate Timing in sec. @ 70°FControl Voltage VA @ 60Hz Feedback Auxiliary Switch Spring Return
MF41-6343 300 (34) Floating 24 vac/dc 5.7 — No 162
MS41-6343 300 (34) 2-10 vdc 24 vac/dc 5.6 2-10 vdc No 148
MS41-6340 300 (34) 2-10 vdc 120 vac 7.5 2-10 vdc No 148
MS41-6341 300 (34) 2-10 vdc 240 vac 9.0 2-10 vdc No 148
Non Spring Return Damper Actuators
Mx41-634x Series 300 lb-in Direct Coupled
Designed for controlling air dampers in building systems with floating or proportional control.
Features • Premier oil immersed gear train construction
• NEMA 4 capable
• ½” conduit connections
• 3’ plenum cable (24V models), 3’ appliance wires for 120/230 vac models
• Overload protected throughout stroke
• 93° nominal rotation
• Manual override
• Tandem Mounting
• UL-873, cUL C22-2, CE, C-Tick
• Operating Temperature –25 to 140°F ( –32 to 60°C)
• Humidity 15 to 95% non-condensing
Direct Coupled Actuators
13
Accessories Chart
Part Number
Description
Spring Return Actuators Non Spring Return Actuators
General Instructions Document
MA
40-7
043
MF4
0-70
43
MS
40-7
043
MA
41-7
073
MF4
1-70
73
MS
41-7
073
MA
41-7
153
MF4
1-71
53
MS
41-7
153
MA
40-7
17x
MF4
0-71
73
MS
40-7
173
MS
4D-x
033
MF4
1-60
43
MS
41-6
043
MF4
1-60
83
MS
41-6
083
MF4
1-61
53
MS
41-6
153
MF4
1-63
43
MS
41-6
343
MS
4D-6
0x3-
1xx
AM-620 Actuator Remote Mount
X X X X X X F-27484
AM-621 Round Shaft Extension
X X X X X X F-27481
AM-671abc
Mounting Bracket
X X X X X XF-25096AM-672abc X X X X X X
AM-673b X X X X X XAM-674 Weather
Shield & BaseX X X X X X X X X X
F-25097AM-675 X X X X X XAM-676 Shaft Extension X X X X X X X X X X
F-25098
AM-686 Position Indicator
X X X X
AM-687d V-clamp X X X XAM-688 Relacement
Universal ClampX X X X
AM-689 Rotation Limiter X X X XAM-690
Crank ArmX X X X
AM-691 X X X XAM-692e V-bolt X X X XAM-693fg Crank Arm Kit X X X X
Damper Actuators
a AM-693 crank arm kit required.b Drill appropriate mounting holes where needed.c The large “C”-shaped clamps included in AM-693 crank arm kit are required
for mounting the actuator. Drill appropriate mounting holes where needed.d For shafts to 1.05” (26.7 mm) diameter or ⁵⁄⁵” (15.9 mm) square.
e For shafts to ¾” and 1.05” (19 to 26.7 mm) diameter (with AM-690 and AM-691, respectively).
f Use the self-tapping screws and flat washers provided in kit to mount actuator.
g AM-692 V-bolt kit required.
14
Direct Coupled Actuators
a For shafts up to ¾” (19 mm) diameter round up to ½” (13 mm) square.b Cannot be used when creating a linked valve/actuator assembly.
Accessories Chart
Part Number
Description
Spring Return Actuators Non Spring Return Actuators
General Instructions Document
MA
40-7
043
MF4
0-70
43
MS
40-7
043
MA
41-7
073
MF4
1-70
73
MS
41-7
073
MA
41-7
153
MF4
1-71
53
MS
41-7
153
MA
40-7
17x
MF4
0-71
73
MS
40-7
173
MS
4D-x
033
MF4
1-60
43
MS
41-6
043
MF4
1-60
83
MS
41-6
083
MF4
1-61
53
MS
41-6
153
MF4
1-63
43
MS
41-6
343
MS
4D-6
0x3-
1xx
AM-703 Span Adjustment
X X X X X X X XF-26895
AM-704 Modulation Interface
X X X X X X X X
AM-705Positioner
X X X X X X X X XF-26895AM-706 X X X X X X X X X
AM-708 500 Ω Resistor X X X X X X XAM-709 Position Indicator
& Stroke LimiterX X
F-26896AM-710a V-clamp X XAM-711 Crank Arm
Adaptor KitX X
AM-712 X XAM-713 Bracket X X XAM-714 Weather Shield X X X X X X X F-25097AM-715 Crank Arm
Adaptor KitX X F-26896
AM-717 Replacement Universal Clamp
X X F-26896
AM-726 Crank Arm Adaptor
X X X XF-26802AM-727 X X X X
AM-728b Conduit Adaptor X X X XAM-751 Anti-rotation
BracketX X X X
F-26898AM-752 X X X X
Damper Actuators
Direct Coupled Actuators
15
Accessories Chart
Part Number
Description
Spring Return Actuators Non Spring Return Actuators
General Instructions Document
MA
40-7
043
MF4
0-70
43
MS
40-7
043
MA
41-7
073
MF4
1-70
73
MS
41-7
073
MA
41-7
153
MF4
1-71
53
MS
41-7
153
MA
40-7
17x
MF4
0-71
73
MS
40-7
173
MS
4D-x
033
MF4
1-60
43
MS
41-6
043
MF4
1-60
83
MS
41-6
083
MF4
1-61
53
MS
41-6
153
MF4
1-63
43
MS
41-6
343
MS
4D-6
0x3-
1xx
AM-735 Crank Arm Kit X X F-27246AM-736 Crank Arm Kit
with BracketX X F-27247
AM-737 Universal Crank Arma X X F-27248
AM-470 Replacement Kit X X F-27249AM-741 Weather Shield X X X X X F-27250AM-753b
Mounting ClampX X X X
F-26898AM-754c X X X XAM-755 Manual Override
CrankX X
AM-756 Metric Conduit Adaptor
X X X X X X X X X X X X F-26899
AM-758 Short “U” Mounting Bracket
X X X X
F-25096AM-759 Tall “U” Mounting
BracketX X X X
AM-760 Slotted “L” Mounting Bracket
X X X X
AM-761 7-inch Anti-rotation Bracket
X X F-26986
AM-762 9-inch Anti-rotation Bracket
X X X X X X X X X X F-25098
AM-763 Manual Override Crank
Xd Xd Xd Xd X F-25098
TF-711-02 Seallight Conduit Connector
X X X XTF-713-02 X X X XTF-5521 Pipe Plug X X X X
Damper Actuators
a For Honeywell Floor Mount Mod. Motor.b For shafts ¾” (19 mm) round and ⁵⁄⁵” (15.9 mm) square.
c For shafts ³⁄⁵” to ½” (10 to 13 mm) round and square.d Only used on Mx41-707x-xxx, Mx41-715x-xxx.
Schneider Electric
1354 Clifford AvenueLoves Park, IL 61111Phone: + 1 888 444 1311 www.schneider-electric.com/buildings
On October 1st, 2009, TAC became the Buildings Business of its parent company Schneider Electric. This document reflects the visual identity of Schneider Electric, however there remains references to TAC as a corporate brand in the body copy. As each document is updated, the body copy will be changed to reflect appropriate corporate brand changes. All brand names, trademarks and registered trademarks are the property of their respective owners.
F-27272-3
© 2
006-
2009
Sch
neid
er E
lect
ric. A
ll rig
hts
rese
rved
.
September 2009 mh