directive number: effective date: subject: osha … · adm 3-0 ; adm 3.4a : ipc 01-00 : ipc...

* OSHA ARCHIVE DOCUMENT * NOTICE: This is an OSHA ARCHIVE Document, and may no longer represent OSHA policy.

DIRECTIVE NUMBER: 03-07 (ADM 12) EFFECTIVE DATE: September 3, 2003

SUBJECT: OSHA Directives Tools-Directives Index and Cross-reference

ABSTRACT

Purpose: This Notice announces a new OSHA Directives Tool, which will be available on the OSHA Intranet, ‘Directives Tools’ web page. The Directives Index and Cross-reference lists and provides hypertext links to all Active Directives. It also provides a cross-reference from the Directives numbers assigned under the former Classification System to those assigned under the new Classification System, introduced by OSHA Instruction ADM 12-0.9.

Scope: OSHA-wide.

References: OSHA Instruction ADM 12-0.9, OSHA Classification System of September 3, 2003.

Cancellations: None.

Expiration Date: This Notice will expire on August 31, 2004 or upon the posting of the Directives Tools-Directives Index and Cross-reference on the OSHA Intranet, ‘Directives Tools’ web page, whichever occurs first.

State Impact: This Notice does not describe a Federal Program Change.

Action Offices: National, Regional and Area Offices.

Originating Office: Office of Management Systems and Organization

Abstract-1 . * OSHA ARCHIVE DOCUMENT *

This document is presented here as historical content, for research and review purposes only.


Contact: Office of Management Systems and Organization 200 Constitution Avenue NW, N4624

Washington, DC 20210 Phone : 202-693-2002

By and Under the Authority of

David Zeigler Director, Administrative Programs

Executive Summary

The OSHA Directives Tools-Directives Index and Cross-reference is a tool for Directives reference purposes. This tool will be posted and maintained on the OSHA Intranet, ‘Directives Tools’ web page.

Significant Changes

This Notice provides a Directives numbers reference tool for Directives writers and researchers. It will be posted on the OSHA Intranet, ‘Directives Tools’ web page. The Office of Management Systems and Organization (OMSO) will keep the materials updated on the ‘Tools’ page. Amending Notices will be issued only when substantive changes are introduced.

Abstract-2 . * OSHA ARCHIVE DOCUMENT *



I Purpose

This Notice announces a new OSHA Directives Tool, which will be available on the OSHA Intranet, ‘Directives Tools’ web page. The Directives Index and Cross-reference lists and provides hypertext links to all Active Directives. It also provides a cross-reference from the Directives numbers assigned under the former Classification System to those assigned under the new Classification System, introduced by OSHA Instruction ADM 12-0.9.

II Scope

This Notice applies OSHA-wide.

III Cancellations

None.

IV References

OSHA Instruction ADM 12-0.9, OSHA Classification System.

V Expiration Date

This Notice will expire on August 31, 2004 or upon the posting of the Directives Tools-Directives Index and Cross-reference on the OSHA Intranet, ‘Directives Tools’ web page, whichever occurs first.

VI Actions Information

A Responsible Office. Office of Management Systems and Organization (OMSO).

B Action Offices. National, Regional and Area Offices.

C Information Offices. State Designees, Consultation Project Managers.

VII Action Required

OSHA managers and supervisors should advise staff members who are assigned responsibilities for researching, drafting and clearing Directives of the availability of this tool.

VIII Federal Program Change

This Notice does not describe a Federal Program Change requiring State adoption or response, but States are encouraged to consider its implications for their operations.

1 . * OSHA ARCHIVE DOCUMENT *



IX Significant Changes

This Notice provides a new tool for Directives writers. It will be posted on the OSHA Intranet, ‘Directives Tools’ web page.

X Periodic Updates

OMSO will keep the materials on the OSHA Intranet, ‘Directives Tools’ web page updated. Amending Notices will be issued only when substantive changes are introduced.

2 . * OSHA ARCHIVE DOCUMENT *


Directives Index and Cross-Reference * OSHA ARCHIVE DOCUMENT *

NOTICE: This is an OSHA ARCHIVE Document, and may no longer represent OSHA policy.

Old Class OLD NUMBER New Class NEW NUMBER SUBJECT Effective Date

ADM 1-0 03-06 (ADM 1) IRT 01-00 03-06 (IRT 01) The IMIS Enforcement Data processing Manual: Table of Contents and Chapters 1 through 7 08/28/2003

ADM 1-0 ADM 1.18 IRT 02-01 IRT 02-01-001 Computer Security Policy 04/26/1993 ADM 1-0 ADM 1-0.19 IRT 03-01 IRT 03-01-001 OSHANET Acceptable Use Policy 09/08/2000 ADM 1-0 ADM 1-0.20 IRT 03-00 IRT 03-00-001 Internet Policies and Procedures 12/15/2000

ADM 1-1 ADM 1-1.18 IRT 01-00 IRT 01-00-002* The Integrated Management Information (IMIS) Microcomputer INFORMIX Skills for the IMIS 04/28/1986

ADM 1-1 ADM 1-1.18 CH-1 IRT 01-00 IRT 01-00-002* Changes to the INFORMIX Skills for the IMIS Manual 08/25/1986 ADM 1-1 ADM 1-1.18 CH-2 IRT 01-00 IRT 01-00-002* Changes to the INFORMIX Skills for the IMIS Manual 11/24/1986 ADM 1-1 ADM 1-1.19B IRT 01-00 IRT 01-00-008* The IMIS Host Reports Manual 11/15/1994 ADM 1-1 ADM 1-1.19B CH-1 IRT 01-00 IRT 01-00-008* Changes to the IMIS Host Reports Manual 04/01/1996

ADM 1-1 ADM 1-1.20B IRT 01-00 IRT 01-00-009

The OSHA IMIS Enforcement/Consultation Communications Manual, ADM 1-1.20B, for use with the NCR microcomputer system 09/01/1995

ADM 1-1 ADM 1-1.21A IRT 01-00 IRT 01-00-004* The IMIS Enforcement Micro Reports Documentation Manual 07/17/1989

ADM 1-1 ADM 1-1.21A CH-1 IRT 01-00 IRT 01-00-004* Change to the IMIS Enforcement Micro Reports Documentation Manual 01/23/1990

ADM 1-1 ADM 1-1.21A CH-2 IRT 01-00 IRT 01-00-004* Change to the IMIS Enforcement Micro Reports Documentation Manual 10/29/1990

ADM 1-1 ADM 1-1.22 IRT 01-00 IRT 01-00-003* The IMIS Overview and WP Manual 07/13/1988 ADM 1-1 ADM 1-1.22 CH-1 IRT 01-00 IRT 01-00-003* The IMIS Overview and WP Manual 05/15/1989 ADM 1-1 ADM 1-1.22 CH-2 IRT 01-00 IRT 01-00-003* Change to the IMIS Overview and WP Manual 04/22/1991 ADM 1-1 ADM 1-1.24 IRT 01-00 IRT 01-00-005 The IMIS Consultation Micro Reports Manual 03/09/1992

ADM 1-1 ADM 1-1.25A IRT 01-00 IRT 01-00-010 The OSHA Consultation User Skills Manual, ADM 11.25A, for use with the NCR Microcomputer System 09/01/1995

ADM 1-1 ADM 1-1.29A IRT 01-00 IRT 01-00-013 The IMIS Consultation Data Processing Manual 12/06/1996

ADM 1-1 ADM 1-1.30 IRT 02-01 IRT 02-01-003* The System Administration and Maintenance Manual for use with the NCR Microcomputer System 07/26/1993

ADM 1-1 ADM 1-1.30 CH-1 IRT 02-01 IRT 02-01-003* The OSHA IMIS System Administration Manual for use with the NCR Microcomputer System 09/01/1995

ADM 1-1 ADM 1-1.31 IRT 01-00 IRT 01-00-007* The IMIS Enforcement Data Processing Manual for use with the NCR Computer System 09/20/1993

ADM 1-1 ADM 1-1.31 CH-1 IRT 01-00 IRT 01-00-007* Change to the IMIS Enforcement Data Processing Manual 02/27/1997 ADM 1-1 ADM 1-1.31 CH-2 IRT 01-00 IRT 01-00-007* Change to the IMIS Enforcement Data Processing Manual 05/29/1997

ADM 1-1 ADM 1-1.32 IRT 01-00 IRT 01-00-006* The Enforcement User Skills Manual for use with the NCR Computer System 07/19/1993

ADM 1-1 ADM 1-1.32 CH-1 IRT 01-00 IRT 01-00-006* Update to the Enforcement User Skills Manual 10/03/1994

A-1 . * OSHA ARCHIVE DOCUMENT *




ADM 1-1 ADM 1-1.35 IRT 01-00 IRT 01-00-011 The NCR and PC Applications for the CSHO Manual for use with the NCR microcomputer system and IBM compatible PC 09/01/1995

ADM 1-1 ADM 1-1.36 IRT 01-00 IRT 01-00-012 The Discrimination IMIS Manual, ADM 1-1.36, for use with the NCR microcomputer system 08/16/1996

ADM 1-1 ADM 1-1.37 IRT 01-00 IRT 01-00-014 Change in Reporting Hazard Correction Verification 08/28/2002 ADM 1-1 ADM 1-1.38 IRT 01-00 IRT 01-00-015 The IMIS Enforcement Data Processing Manual 08/28/2003 ADM 11-0 ADM 11.2A ADM 02-00 ADM 02-00-001 Organizational Change Proposals 11/29/1989 ADM 11-0 ADM 11-0.4 AOC 00-00 AOC 00-00-002 OSHA Executive Board 01/31/2002 ADM 11-0 ADM 11-0.6 ADM 02-01 ADM 02-01-001 Update to OSHA Mission and Function Statements 03/04/2003

ADM 11-2 ADM 11-2.3C ADM 02-02 ADM 02-02-001 Field Organizational Changes below the Regional Office Level 07/15/1991

ADM 12-0 03-07 (ADM 12) ADM 03-00 03-07 (ADM 03) OSHA Directives Tools – Directives Index and Cross-Reference 09/03/2003

ADM 12-0 03-08 (ADM 12) ADM 03-00 03-08 (ADM 03) OSHA Classification Tool – Subject Index 09/03/2003 ADM 12-0 ADM 12-0.4A ADM 03-01 ADM 03-01-004 Revised OSHA Records Management Program 08/03/1998 ADM 12-0 ADM 12-0.5A ADM 03-01 ADM 03-01-005 OSHA Compliance Records 08/03/1998 ADM 12-0 ADM 12-0.9 ADM 03-00 ADM 03-00-007 OSHA Classification System 09/03/2003 ADM 12-7 ADM 12-7.2A ADM 03-01 ADM 03-01-002* Regional and Area Office Records Disposition 07/30/1980

ADM 12-7 ADM 12-7.2A CH-1 ADM 03-01 ADM 03-01-002* Change to Regional and Area Office Records Disposition Schedule 03/14/1988

ADM 12-7 ADM 12-7.3 ADM 03-01 ADM 03-01-003 National Office Records Disposition Schedule 07/31/1980

ADM 12-9 ADM 12-9.2 ADM 03-01 ADM 03-01-001 Release to the State of Personnel Information on Federal Monitors 10/30/1978

ADM 2-0 ADM 2.1 PER 00-00 PER 00-00-001 Employee Recognition Program 10/30/1978 ADM 3-0 ADM 3.4A IPC 01-00 IPC 01-00-002 Multiple Addressee Inquiries 06/01/1984 ADM 3-0 ADM 3.5 IPC 01-00 IPC 01-00-003 Electronic Communications 05/23/1988 ADM 3-2 ADM 3-2.1A IPC 01-00 IPC 01-00-001 OSHA Correspondence Manual 02/27/1981

ADM 3-6 ADM 3-6.2 ADM 03-00 ADM 03-00-001 OSHA TSCA Confidential Business Information Security Manual 10/01/1981

ADM 4-0 ADM 4.3 ADM 01-00 ADM 01-00-001 Redelegation of Personnel Management Authority 02/16/1981 ADM 4-0 ADM 4.4 ADM 01-00 ADM 01-00-002 Administrative Subpoenas 08/19/1991

ADM 4-0 ADM 4-0.3 ADM 01-00 ADM 01-00-003 Redelegation of Authority and Responsibility of the Assistant Secretary for OSHA 03/06/2003

ADM 7-0 ADM 7.3B ADM 03-00 ADM 03-00-005 OSHA Forms Management Program 04/04/1988

ADM 8-0 03-01 (ADM 8) ADM 03-00 03-01 (ADM 03) OSHA Directives Tools – Frequently Asked Questions 03/06/2003 ADM 8-0 ADM 8-0.2 ADM 03-00 ADM 03-00-002 OSHA Policy Issuances 12/11/2000 ADM 8-0 ADM 8-0.3 ADM 03-00 ADM 03-00-003 OSHA Directives System 12/11/2000





ADM 8-0 ADM 8-0.4 ADM 03-00 ADM 03-00-004 Non-Policy Issuances 12/11/2000 BUD 4-1 BUD 4-1.1A BUD 00-00 BUD 00-00-001 Operating Expense Budgets 07/06/1979

COM 4-0 COM 4.3 AOC 00-00 AOC 00-00-001 OSHA Technical Manual Committee - Functions and Responsibilities 03/10/1995

CPL 1-0 CPL 1.2 CPL 00-00 CPL 00-00-001 Interagency "Early Warning System" 10/30/1978 CPL 1-0 CPL 1-0.3 CPL 01-00 CPL 01-00-003 NRTL Program Policies, Procedures, and Guidelines 12/02/1999

CPL 2-0 02-03 (CPL 2) CPL 02-00 02-03 (CPL 02) OSHA’s National Emphasis Program- Nursing and Personal Care Facilities SIC 8051, 8052, 8059 07/17/2002

CPL 2-0 02-05 (CPL 2) CPL 02-00 02-05 (CPL 02) Audit and Verification Program of 2001 Occupational Injury and Illness Records 11/29/2002

CPL 2-0 03-02 (CPL 2) CPL 02-00 03-02 (CPL 02) Site-Specific Targeting 2003 06/18/2003

CPL 2-0 03-03 (CPL 2) CPL 02-00 03-03 (CPL 02) Extension of Enforcement Policy on Column Joists (CPL 2-1.34) 07/18/2003

CPL 2-0 CPL 2.100 CPL 02-00 CPL 02-00-100 Application of the Permit-Required Confined Spaces (PRCS) Standards, 29 CFR 1910.146 05/05/1995

CPL 2-0 CPL 2.103 CPL 02-00 CPL 02-00-103 Field Inspection Reference Manual (FIRM) 09/26/1994

CPL 2-0 CPL 2.106 CPL 02-00 CPL 02-00-106 Enforcement Procedures and Scheduling for Occupational Exposure to Tuberculosis 02/09/1996

CPL 2-0 CPL 2.111 CPL 02-00 CPL 02-00-111 Citation Policy for Paperwork and Written Program Requirement Violations 11/27/1995

CPL 2-0 CPL 2.112 CPL 02-00 CPL 02-00-112 Nationwide Quick-Fix Program 08/02/1996 CPL 2-0 CPL 2.112 CPL 03-00 CPL 03-00-001 Nationwide Quick-Fix Program 08/02/1996 CPL 2-0 CPL 2.113 CPL 02-00 CPL 02-00-113 Fatality Inspection Procedures 04/01/1996 CPL 2-0 CPL 2.115 CPL 02-00 CPL 02-00-115 Complaint Policies and Procedures 06/14/1996 CPL 2-0 CPL 2.2 CPL 02-00 CPL 02-00-002 American Red Cross Agreement 10/30/1978 CPL 2-0 CPL 2.25 I CPL 02-00 CPL 02-00-025 Scheduling System for Programmed Inspections 01/04/1995 CPL 2-0 CPL 2.32A CPL 02-00 CPL 02-00-032* Maritime Standard Alleged Violation Elements (SAVEs) 12/21/1983

CPL 2-0 CPL 2.32A CH-1 CPL 02-00 CPL 02-00-032* Additions to the Maritime Standard Alleged Violation Elements (SAVEs) Manual 08/27/1984

CPL 2-0 CPL 2.32A CH-2 CPL 02-00 CPL 02-00-032* Changes to Maritime SAVEs 04/19/1993 CPL 2-0 CPL 2.32A CH-3 CPL 02-00 CPL 02-00-032* Changes to the Maritime SAVEs Manual 04/11/1994 CPL 2-0 CPL 2.34 CPL 02-00 CPL 02-00-034* Construction SAVEs Manual 09/01/1979 CPL 2-0 CPL 2.34 CH-1 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 01/01/1981 CPL 2-0 CPL 2.34 CH-10 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 07/25/1994 CPL 2-0 CPL 2.34 CH-2 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 06/27/1983 CPL 2-0 CPL 2.34 CH-3 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 06/15/1987 CPL 2-0 CPL 2.34 CH-4 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 02/06/1989 CPL 2-0 CPL 2.34 CH-5 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 08/06/1990 CPL 2-0 CPL 2.34 CH-6 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 07/15/1991





CPL 2-0 CPL 2.34 CH-7 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 08/12/1991 CPL 2-0 CPL 2.34 CH-8 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 08/03/1992 CPL 2-0 CPL 2.34 CH-9 CPL 02-00 CPL 02-00-034* Change to the Construction SAVEs Manual 03/22/1993 CPL 2-0 CPL 2.35 CPL 02-00 CPL 02-00-035* Regulatory and General Industry SAVEs Manual 09/01/1979

CPL 2-0 CPL 2.35 CH-1 CPL 02-00 CPL 02-00-035* Changes to the Regulatory and General Industry SAVEs Manual 01/01/1981











CPL 2-0 CPL 2.35 CH-2 CPL 02-00 CPL 02-00-035* Incorporation of Electrical and Fire Protection SAVEs into the Regulatory and General Industry SAVEs Manual 11/15/1982











CPL 2-0 CPL 2.35 CH-3 CPL 02-00 CPL 02-00-035* Correction of Errors in CPL 2.35 CH-2 12/20/1982







CPL 2-0 CPL 2.36B CPL 02-00 CPL 02-00-036* Agriculture Standard Alleged Violation Elements (SAVEs) Manual 08/30/1993

CPL 2-0 CPL 2.36B CH-1 CPL 02-00 CPL 02-00-036* Changes to the Agriculture SAVEs Manual 05/16/1994

CPL 2-0 CPL 2.42 CPL 02-00 CPL 02-00-042* Interagency Agreement Between the Mine Safety and Health Administration and the OSHA-USDOL 03/14/1980

CPL 2-0 CPL 2.42 CH-1 CPL 02-00 CPL 02-00-042* Interagency Agreement Between the Mine Safety and Health Administration and the OSHA-USDOL 09/16/1980

CPL 2-0 CPL 2.45B CPL 02-00 CPL 02-00-045* Revised Field Operations Manual 06/15/1989 CPL 2-0 CPL 2.45B CH-1 CPL 02-00 CPL 02-00-045* Changes to the Revised Field Operations Manual 12/31/1990 CPL 2-0 CPL 2.45B CH-2 CPL 02-00 CPL 02-00-045* Changes to the Revised Field Operations Manual 03/01/1991 CPL 2-0 CPL 2.45B CH-3 CPL 02-00 CPL 02-00-045* Changes to the Revised Field Operations Manual 06/15/1992 CPL 2-0 CPL 2.45B CH-4 CPL 02-00 CPL 02-00-045* Changes to the Revised Field Operations Manual 12/13/1993 CPL 2-0 CPL 2.45B CH-5 CPL 02-00 CPL 02-00-045* Changes to the Revised Field Operations Manual 03/03/1995

CPL 2-0 CPL 2.46 CPL 02-00 CPL 02-00-046* Memorandum of Understanding between OSHA and the United States Coast Guard 01/20/1982

CPL 2-0 CPL 2.46 CH-1 CPL 02-00 CPL 02-00-046* Page Change for OSHA Instruction CPL 2.46 02/15/1982

CPL 2-0 CPL 2.64 CPL 02-00 CPL 02-00-064 Implementation of a Construction Fatality Information Dissemination System 06/05/1985

CPL 2-0 CPL 2.65A CPL 02-00 CPL 02-00-065 Safety and Health Information Bulletins 08/27/2003

CPL 2-0 CPL 2.66 CPL 02-00 CPL 02-00-066 Settlement Agreement Between The National Grain and Feed Association, Inc., and OSHA, USDOL 07/15/1985

CPL 2-0 CPL 2.69 CPL 02-00 CPL 02-00-069 Special Emphasis: Trenching and Excavation 09/19/1985 CPL 2-0 CPL 2.73 CPL 02-00 CPL 02-00-073 Fireworks Manufacturer Compliance Policy 02/03/1986 CPL 2-0 CPL 2.78 CPL 02-00 CPL 02-00-078* Regional Ergonomics Program 02/09/1987





CPL 2-0 CPL 2.78 CH-1 CPL 02-00 CPL 02-00-078* Page Change for OSHA Instruction CPL 2.78 07/08/1987

CPL 2-0 CPL 2.80 CPL 02-00 CPL 02-00-080 Handling of Cases to be Proposed for Violation-by- Violation Penalties 10/21/1990

CPL 2-0 CPL 2.86 CPL 02-00 CPL 02-00-086 Memorandum of Understanding Between the OSHA and the US Nuclear Regulatory Commission 12/22/1989

CPL 2-0 CPL 2.87 CPL 02-00 CPL 02-00-087 Inspection Procedures for Enforcing the Excavation Standard, 29 CFR 1926, Subpart P 02/20/1990

CPL 2-0 CPL 2.88 CPL 02-00 CPL 02-00-088 Information Dissemination System for Ergonomics Inspections and Consultative Visits Resulting in Significant Benefits 07/02/1990

CPL 2-0 CPL 2.9 CPL 02-00 CPL 02-00-009 Inspections of Granted Variances 10/30/1978

CPL 2-0 CPL 2.90 CPL 02-00 CPL 02-00-090 Guidelines for Administrationof Corporate-wide Settlement Agreements 06/03/1991

CPL 2-0 CPL 2.91 CPL 02-00 CPL 02-00-091 Enhanced Verification of Records 05/13/1990

CPL 2-0 CPL 2.92 CPL 02-00 CPL 02-00-092*

Memorandum of Understanding between the Employment Standards Administration, Wage and Hour Division, and OSHA, USDOL 02/28/1991

CPL 2-0 CPL 2.92 CH-1 CPL 02-00 CPL 02-00-092* Page Change to OSHA Instruction CPL 2.92 06/03/1991

CPL 2-0 CPL 2.94 CPL 02-00 CPL 02-00-094 OSHA Response to Significant Events of Potentially Catastrophic Consequences 07/22/1991

CPL 2-0 CPL 2.95 CPL 02-00 CPL 02-00-095 Enforcement Authority at the Department of Energy’s (DOE) Government-Owned, Contractor-Operated (GOCO) Sites 02/10/1992

CPL 2-0 CPL 2.96 CPL 02-00 CPL 02-00-096 OSHA Support of NIOSH "FACE" Program 03/23/1992

CPL 2-0 CPL 2.98 CPL 02-00 CPL 02-00-098 Guidelines for Case File Documentation for use with Videotapes and Audiotapes 10/12/1993

CPL 2-0 CPL 2-0.102A CPL 04-00 CPL 04-00-001 Procedures of Approval of Local Emphasis Programs (LEPs) 11/10/1999

CPL 2-0 CPL 2-0.114 CPL 02-00 CPL 02-00-114 Abatement Verification Regulation, 29 CFR 1903.19 Enforcement Policies and Procedures 05/28/1998

CPL 2-0 CPL 2-0.119 CPL 02-00 CPL 02-00-119 OSHA High Injury/Illness Rate Targeting and Cooperative Compliance Programs 11/25/1997

CPL 2-0 CPL 2-0.120 CPL 02-00 CPL 02-00-120 Inspection Procedures for the Respiratory Protection Standard 09/25/1998 CPL 2-0 CPL 2-0.121 CPL 02-00 CPL 02-00-121 Providing Assistance to Smaller Employers 03/12/1998 CPL 2-0 CPL 2-0.122 CPL 02-00 CPL 02-00-122 Enforcement Guidance for the US Postal Service 04/16/1999 CPL 2-0 CPL 2-0.123 CPL 02-00 CPL 02-00-123 Procedures for Handling Significant Enforcement Cases 07/14/2000 CPL 2-0 CPL 2-0.124 CPL 02-00 CPL 02-00-124 Multi-Employer Citation Policy 12/10/1999 CPL 2-0 CPL 2-0.125 CPL 02-00 CPL 02-00-125 Home-Based Worksites 02/25/2000 CPL 2-0 CPL 2-0.129 CPL 02-00 CPL 02-00-129 OSHA’s National Emphasis Program on Shipbreaking 08/01/2001 CPL 2-0 CPL 2-0.130 CPL 02-00 CPL 02-00-130 National Emphasis Program on Lead 07/20/2001 CPL 2-0 CPL 2-0.131 CPL 02-00 CPL 02-00-131 Recordkeeping Policies and Procedures Manual 01/01/2002





CPL 2-0 CPL 2-0.51J CPL 02-00 CPL 02-00-051 Enforcement Exemptions and Limitations Under the Appropriations Act 05/28/1998

CPL 2-1 CPL 2-1.14B CPL 02-01 CPL 02-01-014 29 CFR 1910.184(e)(4), Alloy Steel Chain Slings Proof Testing 10/01/1981

CPL 2-1 CPL 2-1.15A CPL 02-01 CPL 02-01-015 New Meat Tenderizing Technology in the Meat Industry (1910.303(a)) 12/23/1981

CPL 2-1 CPL 2-1.17 CPL 02-01 CPL 02-01-017

29 CFR 1918.32(b) Stowed Cargo and Temporary Landing Platforms - Applications to Containers Stowed on the Decks of Vessels 08/30/1982

CPL 2-1 CPL 2-1.18B CPL 02-01 CPL 02-01-018 Enforcement of the Electric Power Generation, Transmission and Distribution Standard 08/03/2002

CPL 2-1 CPL 2-1.19 CPL 02-01 CPL 02-01-019 Logging Operations, Inspection Procedures and Interpretive Guidance 03/17/1995

CPL 2-1 CPL 2-1.20 CPL 02-01 CPL 02-01-020 OSHA/US Coast Guard Authority over Vessels 11/08/1996

CPL 2-1 CPL 2-1.22 CPL 02-01 CPL 02-01-022 Logging Operations, Inspection Procedures and Interpretive Guidance Including Twelve Previously Stayed Provisions 09/27/1996

CPL 2-1 CPL 2-1.23 CPL 02-01 CPL 02-01-023 Inspection Procedures for Enforcing Subpart L, Scaffolds Used in Construction, 29 CFR 1926.450-454 01/07/1997

CPL 2-1 CPL 2-1.25 CPL 02-01 CPL 02-01-025 Guidelines for Point of Operation Guarding of Power Press Brakes 02/14/1997

CPL 2-1 CPL 2-1.27 CPL 02-01 CPL 02-01-027 Focused Inspection Program for Intermodal Container Top Fall Protection 05/12/1998

CPL 2-1 CPL 2-1.28A CPL 02-01 CPL 02-01-028 Revised Compliance Assistance for the Powered Industrial Truck Operator Training Standards 11/30/2000

CPL 2-1 CPL 2-1.29 CPL 02-01 CPL 02-01-029 Interim Inspection Procedures During Communication Tower Construction Activities 01/15/1999

CPL 2-1 CPL 2-1.30 CPL 02-01 CPL 02-01-030 Chocking of Tractor Trailers under the Powered Industrial Truck Standard 10/19/1999

CPL 2-1 CPL 2-1.34 CPL 02-01 CPL 02-01-034 Inspection Policy and Procedures for OSHA’s Steel Erection Standards for Construction 03/22/2002

CPL 2-1 CPL 2-1.35 CPL 03-00 CPL 03-00-002 National Emphasis Program on Amputations 03/26/2002

CPL 2-1 CPL 2-1.36 CPL 02-01 CPL 02-01-036 Interim Inspection Procedures During Communication Tower Construction Activities (change to CPL 2-1.29) 03/26/2002

CPL 2-1 CPL 2-1.37 CPL 02-01 CPL 02-01-037 Compliance Policy for Emergency Action Plans and Fire Prevention Plans 07/09/2002

CPL 2-1 CPL 2-1.38 CPL 02-01 CPL 02-01-038 Enforcement of the Electric Power Generation, Transmission, and Distribution Standards 06/18/2003

CPL 2-1 CPL 2-1.39 CPL 02-01 CPL 02-01-039 Enforcement of Cargo Gear Regulations and the Requirements for Gear Certification in the Maritime Program 03/24/2003

CPL 2-1 CPL 2-1.4C CPL 02-01 CPL 02-01-004 Inspection of Grain Handling Facilities, 29 CFR 1910.272 11/08/1996





CPL 2-2 CPL 2-2.19 CPL 02-02 CPL 02-02-019 Quality Control Weighing Program 10/30/1978

CPL 2-2 CPL 2-2.22 CPL 02-02 CPL 02-02-022*

29 CFR 1910.1018 Inspection and Compliance Procedures for the Permanent Occupation Exposure Standard for Inorganic Arsenic Compound 10/10/1978

CPL 2-2 CPL 2-2.22 CH-1 CPL 02-02 CPL 02-02-022* Removal of Obsolete Sections 06/03/1985

CPL 2-2 CPL 2-2.26A CPL 02-02 CPL 02-02-026 29 CFR 1910.1000, Table Z-2, Citation Policy for Chromates and Chromic Acids 09/05/1980

CPL 2-2 CPL 2-2.27 CPL 02-02 CPL 02-02-027* Benzidine-Based Dyes: Direct Black 38, Direct Brown 95 and Direct Blue 6 Dyes 02/22/1980

CPL 2-2 CPL 2-2.27 CH-1 CPL 02-02 CPL 02-02-027* Removal of Obsolete Sections 06/03/1985 CPL 2-2 CPL 2-2.29 CPL 02-02 CPL 02-02-029 29 CFR 1910.134(e)(5) Respirator Fit-Testing 10/27/1980

CPL 2-2 CPL 2-2.30 CPL 02-02 CPL 02-02-030 29 CFR 1913.10(b)(6) Authorization of Review of Medical Opinions 11/14/1980

CPL 2-2 CPL 2-2.31 CPL 02-02 CPL 02-02-031* Cotton Dust Manual 01/16/1981 CPL 2-2 CPL 2-2.31 CH-1 CPL 02-02 CPL 02-02-031* Removal of Obsolete Sections 06/03/1985

CPL 2-2 CPL 2-2.32 CPL 02-02 CPL 02-02-032 29 CFR 1913.10(b)(6) Authorization of Review of Specific Medical Information 01/19/1981

CPL 2-2 CPL 2-2.33 CPL 02-02 CPL 02-02-033

29 CFR 1913.10, Rules of Agency Practice and Procedure Concerning OSHA Access to Employee Medical Records -Procedures Governing Enforcement Activities 02/08/1982

CPL 2-2 CPL 2-2.35A CPL 02-02 CPL 02-02-035 29 CFR 1910.95(b)(1) Guidelines for Noise Enforcement; Appendix A 12/19/1983

CPL 2-2 CPL 2-2.36 CPL 02-02 CPL 02-02-036 Hepatitis B Risks in the Health Care System 11/30/1983

CPL 2-2 CPL 2-2.38D CPL 02-02 CPL 02-02-038

Inspection Procedures for the Hazard Communication Standard, 29 CFR 1910.1200, 1915.99, 1917.28, 1918.90, 1926.59, and 1928.21 03/20/1998

CPL 2-2 CPL 2-2.39 CPL 02-02 CPL 02-02-039 Sample Material Safety Data Sheet 03/27/1986 CPL 2-2 CPL 2-2.42 CPL 02-02 CPL 02-02-042 Guidelines for Implementing the Field Sanitation Standard 06/22/1992

CPL 2-2 CPL 2-2.43A CPL 02-02 CPL 02-02-043 Chemical Information Manual. Refer to the OCIS Chemical Information Database 07/01/1991

CPL 2-2 CPL 2-2.45A CPL 02-02 CPL 02-02-045* Process Safety Management of Highly Hazardous Chemicals -Compliance Guidelines and Enforcement Procedures 09/28/1992

CPL 2-2 CPL 2-2.45A CH-1 CPL 02-02 CPL 02-02-045* Process Safety Management of Highly Hazardous Chemicals -Compliance Guidelines and Enforcement Procedures (revised) 09/13/1994

CPL 2-2 CPL 2-2.46 CPL 02-02 CPL 02-02-046

29 CFR 1913.10(b)(6) Authorization and Procedures for Reviewing Specific Medical Records to Verify Compliance with 29 CFR 1904 01/05/1989





CPL 2-2 CPL 2-2.47 CPL 02-02 CPL 02-02-047 Compliance Dates for the Lead Standard, 29 CFR 1910.1025 with Clarification of the Implementation Schedule 01/05/1989

CPL 2-2 CPL 2-2.48 CPL 02-02 CPL 02-02-048 List of Laboratories Approved for Blood Lead Analysis 05/01/1989

CPL 2-2 CPL 2-2.50 CPL 02-02 CPL 02-02-050

Information Dissemination System for Chemical Industry Inspections and Consultative Visits Resulting in Significant Benefits 10/17/1990

CPL 2-2 CPL 2-2.51 CPL 02-02 CPL 02-02-051 Inspection Guidelines for Post-Emergency Response Operations under CFR 1910.120 11/05/1990

CPL 2-2 CPL 2-2.52 CPL 02-02 CPL 02-02-052* Enforcement Procedures for Occupational Exposure to Formaldehyde 11/20/1990

CPL 2-2 CPL 2-2.52 CH-1 CPL 02-02 CPL 02-02-052* Page Change to OSHA Instruction CPL 2-2.52 10/07/1991 CPL 2-2 CPL 2-2.53 CPL 02-02 CPL 02-02-053 Guidelines for First Aid Programs 01/07/1991 CPL 2-2 CPL 2-2.54A CPL 02-02 CPL 02-02-054 Respiratory Protection Program Guidelines 07/14/2000

CPL 2-2 CPL 2-2.58 CPL 02-02 CPL 02-02-058 29 CFR 1926.62, Lead Exposure in Construction - Interim Final Rule - Inspection and Compliance Procedures 12/13/1993

CPL 2-2 CPL 2-2.59A CPL 02-02 CPL 02-02-059

Inspection Procedures for the Hazardous Waste Operations and Emergency Response Standard, 29 CFR 1910.120 and 29 CFR 1926.65(q), Emergency Response to Hazardous Substance Releases 04/24/1998

CPL 2-2 CPL 2-2.6 CPL 02-02 CPL 02-02-006* Inorganic Mercury and its Compounds 10/30/1978 CPL 2-2 CPL 2-2.6 CH-1 CPL 02-02 CPL 02-02-006* Removal of Obsolete Sections 06/03/1985

CPL 2-2 CPL 2-2.60 CPL 02-02 CPL 02-02-060 Exposure Control Plan for OSHA Personnel with Occupational Exposure to Bloodborne Pathogens 03/07/1994

CPL 2-2 CPL 2-2.63 CPL 02-02 CPL 02-02-063*

Inspection Procedures For Occupational Exposure to Asbestos Final Rule 29 CFR Parts 1910.1000, 1926.1101 and 1915.1001 11/03/1995

CPL 2-2 CPL 2-2.63 CH-1 CPL 02-02 CPL 02-02-063*

Inspection Procedures For Occupational Exposure to Asbestos Final Rule 29 CFR Parts 1910.1000, 1926.1101 and 1915.1001 01/09/1996

CPL 2-2 CPL 2-2.66 CPL 02-02 CPL 02-02-066 1,3-Butadiene 10/30/1997

CPL 2-2 CPL 2-2.67 CPL 02-02 CPL 02-02-067

Brass and Bronze Ingot Manufacturing Industry Compliance Requirements and Dates under the Lead Standard (29 CFR 1910.1025) 02/27/1997

CPL 2-2 CPL 2-2.69 CPL 02-02 CPL 02-02-069 Enforcement Procedures for the Occupational Exposure to Bloodborne Pathogens 11/27/2001

CPL 2-2 CPL 2-2.7 CPL 02-02 CPL 02-02-007* Crystalline Silica 10/30/1978 CPL 2-2 CPL 2-2.7 CH-1 CPL 02-02 CPL 02-02-007* Removal of Obsolete Sections 06/03/1985

CPL 2-2 CPL 2-2.70 CPL 02-02 CPL 02-02-070

Inspection Procedures for Occupational Exposure to Methylene Chloride Final Rule 29 CFR Part 1910.1052, 29 CFR Part 1915.1052, and 29 CFR Part 1926.1152 12/14/2001





DIS DIS .7 CPL 02-03 CPL 02-03-001 Referral of Section 11(c) Discrimination Complaints to “State Plan” States (1977.18, 1977.23) 02/27/1986

DIS DIS 0-0.9 CPL 02-03 CPL 02-03-002 Whistleblower Investigations Manual 08/22/2003

FAP FAP .2 FAP 00-00 FAP 00-00-001 Procedures for Handling "Alternate" and "Supplementary" Standards Submitted by Federal Agencies 07/08/1981

FAP FAP 1.1 FAP 01-00 FAP 01-00-001 Federal Agency Programs: Compliance Activities 09/11/1985

FAP FAP 1.2A FAP 01-00 FAP 01-00-002 Federal Agency Safety and Health Programs with the Bureau of Prisons, US Department of Justice 04/10/1995

FAP FAP 1.3 FAP 01-00 FAP 01-00-003 Federal Agency Safety and Health Programs 05/17/1996

FAP FAP 2.1B FAP 02-00 FAP 02-00-001 Evaluation of Federal Agency Occupational Safety and Health Programs 06/19/1989

FIN FIN 3.2 FIN 02-00 FIN 02-00-002

Financial and Administrative Monitoring of the 23(g) Grants, 7(c)(1) Cooperative Agreements and 24(b)(2) Grants and Contracts 08/27/1984

FIN FIN 3.3 FIN 02-00 FIN 02-00-001 Audit Resolution of OSHA Assistance Programs 08/27/1984

FIN FIN 8.1 FIN 00-00 FIN 00-00-001*

Debt Collection Act: Area Office and National Office Responsibilities and Procedures for Notifying Employers and Processing Cases 10/01/1986

FIN FIN 8.1 CH-1 FIN 00-00 FIN 00-00-001* Changes to OSHA Instruction FIN 8.1 06/22/1987 OFF OFF 1-6.2 OFF 00-00 OFF 00-00-001 Credential Card Program 01/22/1999 OFF OFF 5-0.1A IPC 00-00 IPC 00-00-003 Printing and Distribution of Publications 07/06/2000 PAE PAE 1.2A EAA 00-00 EAA 00-00-001 Program Development Coordinating Requirement 06/25/1984 PAE PAE 2.1C EAA 01-00 EAA 01-00-001 Field Audit Program 11/18/1991 PER PER 1.2 PER 01-00 PER 01-00-002 Flexible Scheduling for OSHA Executives 02/24/1991 PER PER 10-1.1 PER 05-00 PER 05-00-001 OSHA Training Policy 12/14/1979 PER PER 3.1 PER 02-00 PER 02-00-001 Acceptance of Gratuities 10/30/1978 PER PER 3.2 PER 02-00 PER 02-00-002 Bribe offers to OSHA Employees 10/30/1978 PER PER 3.3 PER 02-00 PER 02-00-003 Outside Employment - Teaching, Lecturing and Writing 10/30/1978

PER PER 3-0.4 PER 00-00 PER 00-00-002 OSHA Personnel Participation in Non-governmental Organizations 07/31/2003

PER PER 5-5.2 EEO 01-00 EEO 01-00-001 OSHA's Policy for Equal Employment Opportunity 10/30/1978 PER PER 8.1 PER 04-00 PER 04-00-001 The OSHA Safety and Health Program 10/30/1978 PER PER 8-2.4 PER 04-00 PER 04-00-002 CSHO Pre-Employment Medical Examination 03/31/1989 PER PER 8-2.5 PER 04-00 PER 04-00-003 CSHO Medical Examinations 03/31/1989 PRO PRO 3.5 IRT 02-01 IRT 02-01-002 End User Computer Policy 06/09/1993 PRO PRO 4.3 PRO 02-00 PRO 02-00-001 Procurement of Safety Glasses and Safety Shoes 10/30/1978 PRO PRO 4.4 PRO 01-00 PRO 01-00-001 OSHA Property Management 10/25/1996

PUB PUB 8.4A IPC 00-00 IPC 00-00-001 OSHA's Periodicals, Pamphlets and Audiovisual Control Plan 07/08/1985





PUB PUB 8.5A IPC 00-00 IPC 00-00-002 OSHA Magazine - Job Safety and Health Quarterly 08/14/1989 PUB PUB 8-1.1 STD 01-23 STD 01-23-001 Guidelines for Cyotoxic (Antineoplastic) Drugs 01/29/1986 PUB PUB 8-1.3 STD 01-12 STD 01-12-002 Guidelines for Robotics Safety 09/21/1987 PUB PUB 8-1.5 STD 01-10 STD 01-10-001 Guidelines for Pressure Vessel Safety 08/14/1989 PUB PUB 8-1.7 STD 01-05 STD 01-05-001 Guidelines for Laser Safety and Hazard Assessment 08/05/1991 PUB PUB 8-1.8 STD 03-12 STD 03-12-003 Guidelines on the Stability of Well Servicing Derricks 07/15/1991 REP REP .1 EAA 02-00 EAA 02-00-001 OSHA Metric Program 11/18/1991 REP REP 2-3.3 IRT 01-00 IRT 01-00-001 OSHA Information Collection Management System 07/29/1985

STD 0-0 STD .2 STD 01-00 STD 01-00-001 Identification of General Industry Safety and Health Standards (29 CFR 1910) Applicable to Shipyard Work 11/04/1985

STD 1-1 STD 1-1.1 STD 01-01 STD 01-01-001 Defining the Term "Nominal Diameter" 10/30/1978

STD 1-1 STD 1-1.10 STD 01-01 STD 01-01-010 Height of Guardrails in General Industry Applications (1910.23(e)(1)) 06/30/1981

STD 1-1 STD 1-1.11 STD 01-01 STD 01-01-011 The Alternating Tread Type Stair (1910.24) 04/26/1982

STD 1-1 STD 1-1.12 STD 01-01 STD 01-01-012 Application of 29 CFR 1910.27, Fixed Ladders, to Fixed Ladders Used in Emergency Situations 06/20/1983

STD 1-1 STD 1-1.13 STD 01-01 STD 01-01-013 Fall Protection in General Industry 29 CFR 1910.23(c)(1),(c)(3) and 29 CFR 1910.132(a) 04/16/1984

STD 1-1 STD 1-1.14 STD 01-01 STD 01-01-014 Fixed Ladders Used on Outdoor Advertising Structures/Billboards in the Outdoor Advertising Industry 01/26/1993

STD 1-1 STD 1-1.3 STD 01-01 STD 01-01-003

29 CFR 1910.27(d)(5) Fixed Ladders, Special Requirements, Ladder Safety Devices, or 29 CFR 1926.450(a)(5) Ladders, General Requirements, which Adopts ANSI A14.3-1956, Safety Code for Fixed Ladders, section 6.5, Ladder Safety Devices 10/30/1978

STD 1-1 STD 1-1.4 STD 01-01 STD 01-01-004 29 CFR 1910.22(b)(2) Marking of Aisles and Passageways 10/30/1978

STD 1-1 STD 1-1.5 STD 01-01 STD 01-01-005 29 CFR 1910.23(c)(1) Protection of Opensided Floors, Platforms and Runways; Guardrails - Loading Rack Platforms 10/30/1978

STD 1-1 STD 1-1.6 STD 01-01 STD 01-01-006 29 CFR 1910.23(e)(5)(iii) Clearance of Handrails and Railings - General Industry 10/30/1978

STD 1-1 STD 1-1.7 STD 01-01 STD 01-01-007 29 CFR 1910.23 Guarding Floor and Wall Openings and Holes - General Industry 10/30/1978

STD 1-1 STD 1-1.8 STD 01-01 STD 01-01-008 29 CFR 1910.23(c) Metal Pouring Platforms - Protection of Opensided Floors, Platforms and Runways 10/30/1978

STD 1-1 STD 1-1.9 STD 01-01 STD 01-01-009 29 CFR 1910.27 Clarification of Fixed Ladders, Relative to Manhole (Rungs) Steps 12/29/1978

STD 1-10 STD 1-10.2 STD 01-10 STD 01-10-002 Drains on Air Receivers, 29 CFR 1910.169(a)(2)(i) and (b)(2) 10/30/1978





STD 1-11 STD 1-11.3 STD 01-11 STD 01-11-003 29 CFR 1910.178(m)(6) Powered Industrial Trucks, Truck Operations 10/30/1978

STD 1-11 STD 1-11.4 STD 01-11 STD 01-11-004 29 CFR 1910.178(g)(2) Battery Charging Stations for Fork Lifts and Other Industrial Trucks 10/30/1978

STD 1-11 STD 1-11.6A STD 01-11 STD 01-11-006 Disparity Between 29 CFR 1910.178(c)(2)(vii) and Table N-1, 29 CFR 1910.178(c)(2) 02/19/1979

STD 1-11 STD 1-11.7 STD 01-11 STD 01-11-007 29 CFR 1910.178(k)(1) and (m)(7); Mechanical Means to Secure Trucks or Trailers to a Loading Dock 08/05/1981

STD 1-12 STD 1-12.1 STD 01-12 STD 01-12-001 Defining Acceptable Guarding of Fan Blades (1910.212(a)(5)) 10/30/1978

STD 1-12 STD 1-12.10 STD 01-12 STD 01-12-010 Application of 29 CFR 1910.212(a)(1) to Food Waste Disposal Equipment 10/30/1978

STD 1-12 STD 1-12.12 STD 01-12 STD 01-12-012 General Requirements for All Machines, as Applied to Power Press Brakes 10/30/1978

STD 1-12 STD 1-12.14 STD 01-12 STD 01-12-014 Clarification of 29 CFR 1910.219, the Terms "Enclosed" and "Fully Enclosed", as applying to Power Transmission Belts 10/30/1978

STD 1-12 STD 1-12.15 STD 01-12 STD 01-12-015 29 CFR 1910.213(a)(4) Woodworking Machinery Requirements 10/30/1978

STD 1-12 STD 1-12.17 STD 01-12 STD 01-12-017 29 CFR 1910.213(h)(1) Radial Saw Guards 10/30/1978

STD 1-12 STD 1-12.18 STD 01-12 STD 01-12-018 29 CFR 1910.213(c)(1) and (h)(1) Woodworking Machining Guarding Requirements 10/30/1978

STD 1-12 STD 1-12.19 STD 01-12 STD 01-12-019

Application of 29 CFR 1910.212(a)(1) , Ingoing Nip Points, 29 CFR 1910.219(a)(1), General Requirements and 29 CFR 1910.219(e)(3), Vertical and Inclined Belts to Light and Medium Duty Sewing Machines in the Light Apparel Manufacturing Industries 10/30/1978

STD 1-12 STD 1-12.20 STD 01-12 STD 01-12-020 29 CFR 1910.217(b)(3)(i) Mechanical Power Presses Single Stroke Mechanism Requirements 10/30/1978

STD 1-12 STD 1-12.21 STD 01-12 STD 01-12-021 29 CFR 1910.217 Mechanical Power Presses, Clarification 10/30/1978

STD 1-12 STD 1-12.22 STD 01-12 STD 01-12-022

29 CFR 1910.212(a)(3)(ii) Point of Operation Guarding for All Machines as Applied to the Hand-fed Engraving Presses Used in the Engraved Stationery Manufacturing Industry 01/02/1979

STD 1-12 STD 1-12.23A STD 01-12 STD 01-12-023 Guarding of Three-Roller Printing Ink Mills 07/12/1994

STD 1-12 STD 1-12.24 STD 01-12 STD 01-12-024

Clarification and Interpretation of 29 CFR 1910.217 Mechanical Power Press, as Applied to the Safeguarding Requirements for Diesetters 07/30/1979

STD 1-12 STD 1-12.25A STD 01-12 STD 01-12-025 Awareness Barriers Installed on Metal Cutting Shears 07/12/1994

STD 1-12 STD 1-12.26A STD 01-12 STD 01-12-026 Abrasive Operations Using Cutoff Wheels and Masonry Saws 09/26/1994





STD 1-12 STD 1-12.27 STD 01-12 STD 01-12-027 Applicable Standards as they Pertain to Iron Workers and Mechanical Power Presses 06/30/1981

STD 1-12 STD 1-12.28 STD 01-12 STD 01-12-028* Alternative Abatement Methods of 29 CFR 1910.212(a)(1) and (a)(2) as Applied to the Oil and Gas Drilling Industry 02/07/1983

STD 1-12 STD 1-12.28 CH-1 STD 01-12 STD 01-12-028* Alternative Abatement Methods of 29 CFR 1910.212(a)(1) and (a)(2) as Applied to the Oil and Gas Drilling Industry 02/14/1983

STD 1-12 STD 1-12.4 STD 01-12 STD 01-12-004 Caution Labeling of Radial Saws (29 CFR 1910.213(h)(5)) 10/30/1978

STD 1-12 STD 1-12.5 STD 01-12 STD 01-12-005 Acceptable Guarding for Circular Meat Cutting Saws: 29 CFR Section 1910.212(a)(3)(ii) 10/30/1978

STD 1-12 STD 1-12.6 STD 01-12 STD 01-12-006 29 CFR 1910.218 Forging Machines 10/30/1978

STD 1-12 STD 1-12.7 STD 01-12 STD 01-12-007 29 CFR 1910.217 and 29 CFR 1910.212 Applicability of Platen Presses 10/30/1978

STD 1-12 STD 1-12.8 STD 01-12 STD 01-12-008 29 CFR 215(a)(4) Abrasive Wheel Machinery Work Rests 10/30/1978 STD 1-12 STD 1-12.9 STD 01-12 STD 01-12-009 29 CFR 1910.212 General Requirements for All Machines 10/30/1978

STD 1-13 STD 1-13.1 STD 01-13 STD 01-13-001 Reduction of Air Pressure below 30 psi for Cleaning Purposes 10/30/1978 STD 1-13 STD 1-13.2A STD 01-13 STD 01-13-002 Explosive Actuated Fastening Tools 12/09/1985

STD 1-13 STD 1-13.4 STD 01-13 STD 01-13-004 Portable Belt Sanding Machines as Covered by 29 CFR 1910.243(a)(3) and 29 CFR 1926.304(f) 08/05/1981

STD 1-14 STD 1-14.1 STD 01-14 STD 01-14-001 Replacement Welding Tips (1910.252(a)(1)(iii)) 10/30/1978

STD 1-15 STD 1-15.1 STD 01-13 STD 01-13-005 Clarification of "Operations Which Involve Construction Work" as Related to Telecommunications Work 10/30/1978

STD 1-15 STD 1-15.2 STD 01-15 STD 01-15-002 29 CFR 1910.256(d)(1)(ii)(b) Unloading Equipment and Facilities; Hydraulically Operated Log Handling Machines 10/30/1978

STD 1-15 STD 1-15.4 STD 01-15 STD 01-15-004 Interpretation of 29 CFR 1910.268(h)(8) Ladder Requirements Applying to Metal Manhole Ladders 10/30/1978

STD 1-15 STD 1-15.5 STD 01-15 STD 01-15-005

Clarification of 29 CFR 1926.604(a)(2)(i) and (ii) and 29 CFR 1910.266(d)(2)(v) and (vi); Use of ½ Inch Plastic Sheets as a Substitute for Open Mesh Material 10/30/1978

STD 1-16 STD 1-16.7 STD 01-16 STD 01-16-007 Electrical Safety-Related Work Practices - Inspection Procedures and Interpretive Guidelines 07/01/1991

STD 1-2 STD 1-2.1 STD 01-02 STD 01-02-001

29 CFR 1910.36(b)(8) Means of Egress; Fundamental Requirements - Relative to Workover Rigs Used to Service Oil Wells 10/30/1978

STD 1-23 STD 1-23.2 STD 01-17 STD 01-17-001 29 CFR 1910.401-1910.441 Subpart T - Commercial Diving Operations 10/30/1978

STD 1-23 STD 1-23.4 STD 01-23 STD 01-23-004 OSHA Medical Surveillance Regulations - Genetic Testing 08/22/1980

STD 1-3 STD 1-3.1 STD 01-03 STD 01-03-001 Citation for 5(a)(1) Violation when 29 CFR 1910.68 is Inapplicable 10/30/1978





STD 1-3 STD 1-3.2 STD 01-03 STD 01-03-002 Hunt-Pierce Servi-Lift #9-271 Aerial Lift (1910.67) 03/21/1979

STD 1-3 STD 1-3.3 STD 01-03 STD 01-03-003*

Building Anchors Used for Intermittent Stabilization of a Suspended Powered Platform in Window Washing Operations and Light Building Maintenance 11/01/1982

STD 1-3 STD 1-3.3 CH-1 STD 01-03 STD 01-03-003* Page Change for OSHA Instruction STD 1-3.3 11/12/1985

STD 1-4 STD 1-4.1 STD 01-04 STD 01-04-001 OSHA Coverage of Ionizing Radiation Sources Not Covered by Atomic Energy Act of 1954 10/30/1978

STD 1-4 STD 1-4.2 STD 01-04 STD 01-04-002 Classification of Polychlorinated Biphenyls (PCBs) Standards 10/30/1978 STD 1-5 STD 1-5.1 STD 01-09 STD 01-09-001 Fire Protection System for Electrostatic Spraying 10/30/1978

STD 1-5 STD 1-5.10 STD 01-05 STD 01-05-010 Clarification of 29 CFR 1910.107(b)(5)(i) Average Air Velocity of Spray Booths 10/30/1978

STD 1-5 STD 1-5.11 STD 01-05 STD 01-05-011 Uniformity in Interpretation of 29 CFR 1910.107(b)(5)(iv) and CFR 1910.107 (f)(1) 10/30/1978

STD 1-5 STD 1-5.12 STD 01-05 STD 01-05-012 29 CFR 1910.109 Explosives and Blasting Agents, Proposed Standards Modifications 10/30/1978

STD 1-5 STD 1-5.13 STD 01-05 STD 01-05-013 29 CFR 1910.106(h)(8)(iii) or 29 CFR 1910.107(g)(3) or 29 CFR 1910.108(f)(2) - Relative to Metal Waste Cans 10/30/1978

STD 1-5 STD 1-5.14A STD 01-05 STD 01-05-014

US Department of Transportation (DOT) Exemption Which Allow Shipment of Combustible and Flammable Liquids in Polyethylene Containers - 29 CFR 1910.106(d)(2)(i) 10/24/1980

STD 1-5 STD 1-5.15 STD 01-05 STD 01-05-015

29 CFR 1910.106(e)(2)(ii)(b) Clarification of the Quantity of Liquid that may be Located Outside of an Inside Storage Room or Storage Cabinet in a Building or in any one Fixed Area of a Building 11/09/1979

STD 1-5 STD 1-5.16 STD 01-05 STD 01-05-016 Venting LP-Gas to the Atmosphere (1910.110(b)(14)(iv)) 10/16/1980

STD 1-5 STD 1-5.18A STD 01-05 STD 01-05-018

Acceptance of US Department of Transportation Exemption DOT-E 8845 of the Select Fire Oil-Well Perforating System Detonator Interruption Device (DID) 07/12/1994

STD 1-5 STD 1-5.2 STD 01-05 STD 01-05-002 Drainage, Dikes, and Walls for Aboveground Tanks (29 CFR 1910.106(b)(2)(vii)) 10/30/1978

STD 1-5 STD 1-5.4 STD 01-05 STD 01-05-004

Application of Section 1910.106, Flammable and Combustible Liquids and Particularly Diking Requirements of 1910.106(b)(2)(vii)(c)(4) 10/30/1978

STD 1-5 STD 1-5.8 STD 01-05 STD 01-05-008

29 CFR 1910.104(b)(3)(iii) Oxygen: Bulk Oxygen Systems; Distance Between Systems and Exposures - Fire Resistive Structures 10/30/1978

STD 1-5 STD 1-5.9 STD 01-05 STD 01-05-009 29 CFR 1910.106(a)(14) Flashpoint – Aceptable Method of Determining Flashpoints 10/30/1978





STD 1-6 STD 1-6.1 STD 01-06 STD 01-06-001 Application of 29 CFR 1910.132(a) to the Retail Food Industry 10/30/1978 STD 1-6 STD 1-6.5 STD 01-06 STD 01-06-005 Exemption for Religious Reasons from Wearing Hard Hats 06/20/1994

STD 1-6 STD 1-6.6 STD 01-06 STD 01-06-006 Inspection Guidelines for 29 CFR 1910, Subpart I, the Revised Personal Protective Equipment Standards for General Industry 06/16/1995

STD 1-7 STD 1-7.2 STD 01-07 STD 01-07-002 29 CFR 1910.145(d)(10) Slow-moving Vehicle Emblem Requirements 10/30/1978

STD 1-7 STD 1-7.3 STD 01-05 STD 01-05-019

29 CFR 1910.147 The Control of Hazardous Energy (Lockout/Tagout) Inspection Procedures and Interpretive Guidance 09/11/1990

STD 1-8 STD 1-8.2 STD 01-08 STD 01-08-002

29 CFR 1910.151(c) Medical Services and First Aid, 29 CFR 1926.50 and .51, Medical Services and First Aid, and Sanitation, Respectively, Applicable to Electric Storage Battery Charging and Maintenance Areas 03/08/1982

STD 1-9 STD 1-9.2 STD 01-09 STD 01-09-002 29 CFR 1910.157(f)(2), (f)(2)(i) and (f)(4) Hydrostatic Testing of Dry Chemical Cartridge Portable Fire Extinguishers 08/05/1981

STD 1-9 STD 1-9.3 STD 01-09 STD 01-09-003 29 CFR 1910.156(e)(3)(ii) Fire-Resistive Coat Requirements for Fire Brigades 12/12/1981

STD 2-0 STD 2.1 STD 02-00 STD 02-00-001 Application of the Hazard Communication Standard to the Shipyard Employment Industry 01/20/1987

STD 2-0 STD 2.2 STD 02-00 STD 02-00-002 Carriage of Automobiles in Containers (1917.71(b)(4); 1917.71(b)(5) 07/03/1989

STD 2-1 STD 2-1.4A STD 02-01 STD 02-01-004 29 CFR 1918.74(a)(9) Crane Load Indicating Device 11/02/1979 STD 2-1 STD 2-1.7 STD 02-01 STD 02-01-007 The Meaning of 29 CFR 1918.74(a)(9)(viii)(d) 10/30/1978

STD 2-1 STD 2-1.8 STD 02-01 STD 02-01-008

Responsibility Under 29 CFR 1918 for Compliance Affecting Equipment Used, but not Owned by, or Under the Control of the Employer 10/30/1978

STD 2-1 STD 2-1.9 STD 02-01 STD 02-01-009

HAZARD ALERT - Use of 4x29 Wire Rope as Cargo Runner (Hoisting Wire) for Loading/Discharging Cargo in the United States 10/01/1990

STD 2-4 STD 2-4.1 STD 02-04 STD 02-04-001

29 CFR 1915 Subpart B, Confined and Enclosed Spaces and Other Dangerous Atmospheres in Shipyard Employment – Inspection Procedures and Interpretive Guidance 06/23/1995

STD 2-4 STD 2-4.2 STD 02-04 STD 02-04-002

29 CFR 1915 Subpart I Personal Protective Equipment (PPE) for Shipyard Employment Inspection Procedures and Interpretive Guidelines 09/27/1996

STD 3-0 STD 3-0.1A STD 03-00 STD 03-00-001

Plain Language Revision of OSHA Instruction STD 3.1, Interim Fall Protection Compliance Guidelines for Residential Construction 06/18/1999





STD 3-1 STD 3-1.1 STD 03-01 STD 03-01-001 Citation Policy Regarding 29CFR 1926.20, 29 CFR 1926.21 and Related General Safety and Health Provisions 06/22/1987

STD 3-10 STD 3-10.1B STD 03-10 STD 03-10-001 General Industry and Maritime Industry Standards as Related to Construction Standard 1926.451(a)(10)*** 08/14/1979

STD 3-10 STD 3-10.2 STD 03-10 STD 03-10-002 29 CFR 1926.451(i)(8) Multistage Suspension Scaffolds*** 10/30/1978

STD 3-10 STD 3-10.3 STD 03-10 STD 03-10-003 29 CFR 1926.451(a)(5) Scaffolding, General Requirements, Guardrails*** 10/30/1978

STD 3-10 STD 3-10.4 STD 03-10 STD 03-10-004 29 CFR 1926.451 Scaffolding*** 10/30/1978

STD 3-10 STD 3-10.6 STD 03-10 STD 03-10-006 29 CFR 1926.451(w) and 1926.451(a)(18) as Applied to Welding Required on Float or Ship Scaffolds*** 08/16/1982

STD 3-11 STD 3-11.1 STD 03-11 STD 03-11-001 Safety Monitoring System as it Applies to 29 CFR 1926.500(g)(1) 03/08/1982

STD 3-12 STD 3-12.1A STD 03-12 STD 03-12-001 29 CFR 1926.550(a)(15)(i) Clearance Between Electrical Power Lines and Cranes 05/09/1980

STD 3-12 STD 3-12.2 STD 03-12 STD 03-12-002 Uniformity in Interpretation of 29 CFR 1926.550(a)(9) 10/30/1978

STD 3-12 STD 3-12.4 STD 03-12 STD 03-12-004

Overhead and Gantry Cranes and Derricks - "Normal Operating Conditions, 29 CFR 1910.179(e)(6)(i), 29 CFR 1910.179(g)(2)(i), and 29 CFR 1910.181(j)(1)(i); 29 CFR 1926.550(d)(4) and 29 CFR 1926.550(e) 02/08/1982

STD 3-13 STD 3-13.1 STD 03-13 STD 03-13-001 Clarification of 29 CFR 1926.603(a)(8) Related to Tying Off Loft-Workers, Top-Men and/or Pile-monks 10/30/1978

STD 3-13 STD 3-13.2 STD 03-13 STD 03-13-002 29 CFR 1926.605(a)(1) as Applied to Marine Construction 07/15/1982

STD 3-15 STD 3-15.3 STD 03-15 STD 03-15-003 29 CFR 1926.705, Requirements for Lift-Slab Construction Operations - Inspection Procedures and Guidelines 03/01/1991

STD 3-19 STD 3-19.1 STD 03-19 STD 03-19-001 29 CFR 1926.902(d) Proposed Modifications to Explosives and Blasting Agents and Surface Transportation of Explosives 10/30/1978

STD 3-4 STD 3-4.1A STD 03-04 STD 03-04-001 De Minimis for Absence of a Flame Arrestor Screen in a Safety Can 09/16/1980

STD 3-6 STD 3-6.1 STD 03-06 STD 03-06-001 1926.250(b)(1) Material Storage - As Related to Interim Storage of Temporary Flooring Used in Steel Erection 10/30/1978

STD 3-6 STD 3-6.2 STD 03-06 STD 03-06-002

29 CFR 1926.250(b)(1) Material Storage - As Related to Interim Storage of Concrete Forms and Shoring Between Placements 10/30/1978

STD 3-8 STD 3-8.1 STD 03-08 STD 03-08-001 Welding, Cutting or Heating of Metals Coated with Lead-Bearing Paint 10/30/1978

STD 3-8 STD 3-8.2 STD 03-08 STD 03-08-002 29 CFR 1926.350(a)(9) Securing of Compressed Gas Cylinders 03/11/1981





STD 4-0 STD 4.1 STD 04-00 STD 04-00-001

Interpretations of (a) 29 CFR 1928.51(a) Definitions "Agricultural Tractor"; (b) 29 CFR 1928.51(b)(1), Rollover Protective Structures (ROPS) 10/30/1978

STD 4-0 STD 4.2 STD 04-00 STD 04-00-002 Low Profile Tractor 10/30/1978 STD 6-0 STD 6.1 STD 06-00 STD 06-00-001 Variance Policy and Procedures 10/30/1978 STD 8-0 STD 8.1 STD 08-00 STD 08-00-001 Interpretation of Standards 09/15/1980 STP 2-0 STP 2.1 CSP 01-01 CSP 01-01-001 Standard Comparison Format for 18(b) Plans 10/30/1978 STP 2-0 STP 2.11 CSP 01-03 CSP 01-03-001 Maritime Jurisdiction in State Plan States (1910.11) 10/30/1978

STP 2-0 STP 2.12B CSP 01-01 CSP 01-01-025

State Program Requirements for Statistical Information on the Incidence of Occupational Injuries and Illnesses by Industry; on the Injured or Ill Worker; and on the Circumstances of the Injuries or Illnesses 05/04/1992

STP 2-0 STP 2.13 CSP 01-03 CSP 01-03-002 Reference Book on Jurisdictional Issues 10/30/1978

STP 2-0 STP 2.18 CSP 01-01 CSP 01-01-013 Inspections and Investigations: Obtaining Warrants on an Ex Parte Basis and Prior to Attempting Entry 02/26/1981

STP 2-0 STP 2.2 CSP 01-01 CSP 01-01-002 Definition of "Issue" (1902) 10/30/1978

STP 2-0 STP 2.21 CSP 01-01 CSP 01-01-016 Occupational Noise Exposure; Hearing Conservation Amendment, 29 CFR 1910.95 12/12/1981

STP 2-0 STP 2.23 CSP 01-01 CSP 01-01-031 Final Rule on Abatement Verification (1903.19) 06/04/1997 STP 2-0 STP 2.3 CSP 01-01 CSP 01-01-003 Providing for Consultation in a State 18(b) Plan 10/30/1978 STP 2-0 STP 2-0.22B CSP 01-00 CSP 01-00-002 State Plan Policies and Procedures Manual 03/21/2001

STP 2-1 STP 2-1.100 CSP 01-01 CSP 01-01-012 Revised Standards for a Merit System of Personnel Administration for Grant-Aided Agencies 11/10/1980

STP 2-1 STP 2-1.101 CSP 01-01 CSP 01-01-015 Prohibition of Sanctions Against Employees under State Plans 07/22/1981

STP 2-1 STP 2-1.10A CSP 01-03 CSP 01-03-004 The Effect of Preemption on State Agencies without 18(b) Plans 03/13/1981

STP 2-1 STP 2-1.117 CSP 01-01 CSP 01-01-018 State Standards 08/31/1984

STP 2-1 STP 2-1.12 CSP 01-01 CSP 01-01-007 State Statistical and Recordkeeping Programs under 18(b) Plans 10/30/1978

STP 2-1 STP 2-1.126A CSP 01-01 CSP 01-01-026

Occupational Exposure to Asbestos, Tremolite, Antrohyllite, Actinolite; Final Rules Amending Present Standards in General Industry (29 CFR 1910.1001) and in Construction (29 CFR 1926.58) and Lifting of Administrative Stay 10/21/1992

STP 2-1 STP 2-1.13 CSP 01-05 CSP 01-05-002 Public Employee Recordkeeping under 18(b) Plans 10/30/1978 STP 2-1 STP 2-1.138 CSP 01-01 CSP 01-01-019 Field Sanitation: Final Rule 09/21/1987

STP 2-1 STP 2-1.141 CSP 01-01 CSP 01-01-020 Servicing of Single Piece and Multi-Piece Rim Wheels at Marine Terminals (1910.177) 12/02/1987

STP 2-1 STP 2-1.146A CSP 01-01 CSP 01-01-021 Presence Sensing Device Initiation of Mechanical Power Presses: Final Rule (1910.217) 08/07/1989





STP 2-1 STP 2-1.147A CSP 01-01 CSP 01-01-022 Safety Testing or Certification of Certain Workplace Equipment and Materials (29 CFR 1910.7 et al) 08/07/1989

STP 2-1 STP 2-1.154C CSP 01-01 CSP 01-01-024 Hazardous Waste Operations and Emergency Response; Final Rule and Corrections (1910.120) 06/10/1991

STP 2-1 STP 2-1.15A CSP 01-03 CSP 01-03-003 Official Procedure(s) for Closing Out OSHA Cases in States with Operational Plans 12/12/1980

STP 2-1 STP 2-1.163 CSP 01-01 CSP 01-01-023 Revised Federal Penalty Levels 05/13/1991

STP 2-1 STP 2-1.164 CSP 01-00 CSP 01-00-001 Involving State Plan States in the Development of Federal Standards 08/12/1991

STP 2-1 STP 2-1.17 CSP 01-01 CSP 01-01-008 Transfer of Responsibility for Review and Approval or Rejection of State Standards 10/30/1978

STP 2-1 STP 2-1.171 CSP 01-01 CSP 01-01-027 Lead Exposure in Construction: Interim Final Rule 07/06/1993

STP 2-1 STP 2-1.172 CSP 01-01 CSP 01-01-028 Electric Power Generation, Transmission, and Distribution; Electrical Protective Equipment; Final Rule 04/15/1994

STP 2-1 STP 2-1.173 CSP 01-01 CSP 01-01-029 Final Rule on Reporting of Fatality or Multiple Hospitalization Incidents 06/07/1994

STP 2-1 STP 2-1.174 CSP 01-01 CSP 01-01-030 Issuance of Interpretive Rule Addressing OSHA’s Policy on Employee Rescue Efforts 03/10/1995

STP 2-1 STP 2-1.19 CSP 01-01 CSP 01-01-009 Sample Federal Register Notices for Approval of State Standards 10/30/1978

STP 2-1 STP 2-1.3 CSP 01-01 CSP 01-01-004 General Guidance for Regional Office Review of State 18(b) Plans 10/30/1978

STP 2-1 STP 2-1.4 CSP 01-01 CSP 01-01-005 Review and Analysis of State 18(b) Plans at the National Office 10/30/1978

STP 2-1 STP 2-1.6 CSP 01-01 CSP 01-01-006 Pre-Approval Public Disclosure of State Plans (1902.11) 10/30/1978

STP 2-1 STP 2-1.9 CSP 01-05 CSP 01-05-001 Coverage of State and Local Employees in State Plans (18(c)(6)) 10/30/1978

STP 2-1 STP 2-1.94 CSP 01-01 CSP 01-01-011 Federal Program Transmittal: Occupational Exposure to Lead, Final Standard 02/14/1979

STP 2-2 STP 2-2.8B CSP 01-01 CSP 01-01-017 Fire Protection, Means of Egress; Hazardous Materials 06/20/1983 STP 2-2 STP 2-2.9 CSP 01-01 CSP 01-01-014 State Posters 04/03/1981

STP 2-4 STP 2-4.9A CSP 01-02 CSP 01-02-001 Utilization of Federal Variance Processing System for Monitoring of Approved State Plans 01/30/1981

TED 1-0 TED 1.12A TED 01-00 TED 01-00-012 Training Program for OSHA Compliance Personnel 07/07/1992

TED 1-0 TED 1.13 TED 01-00 TED 01-00-013 Integrated Management Information System (IMIS) Training: Course Descriptions and Registration Requirements 08/08/1988

TED 1-0 TED 1.14 TED 01-00 TED 01-00-014 Guidelines for Developing OSHA Technical Manual (OTM) 03/17/1995 TED 1-0 TED 1-0.15A TED 01-00 TED 01-00-015 OSHA Technical Manual (OTM) 01/20/1999 TED 3-0 03-04 (TED 3) CSP 02-00 03-04 (CSP 02) Federal Consultation Cooperative Agreement Application for 07/14/2003





FY 2004

TED 3-0 03-05 (TED 3) CSP 02-00 03-05 (CSP 02) Combined Application for 23(g) Grants and 21(d) Consultation Cooperative Agreements for FY 2004 07/08/2003

TED 3-0 TED 3.1 CSP 01-01 CSP 01-01-010 Modification of the Requirements for Consultation Programs in State 18(b) Plans 10/30/1978

TED 3-0 TED 3.6 CSP 02-00 CSP 02-00-001 Consultation Policies and Procedures Manual 08/06/2001

TED 3-0 TED 3.7 CSP 02-01 CSP 02-01-001 Consultation for Wood Treatments Operations Utilizing Inorganic Compounds 09/09/1986

TED 3-0 TED 3.9 CSP 02-01 CSP 02-01-002 Information Dissemination System for Consultation Visits Resulting in Significant Benefits 12/30/1987

TED 6-0 TED 6.1D TED 03-00 TED 03-00-001 Administering OSHA Discretionary Grant Programs 07/16/1997

TED 8-0 TED 8.4 CSP 03-01 CSP 03-01-002 Voluntary Protection Program (VPP) Policies and Procedures Manual 03/25/2003

TED 8-0 TED 8-0.2 CSP 03-02 CSP 03-02-001 OSHA Strategic Partnerships for Worker Safety and Health 11/13/1998

TED 8-0 TED 8-0.3 CSP 03-01 CSP 03-01-001

Policies and Procedures Manual for Special Government Employee (SGE) activity conducted under the auspices of the OSHA Voluntary Protection Program 01/04/2002

*Changes will be incorporated into one directive under one number and with the effective date of the last change e.g. four directives: CPL 2.32A and Changes 1 - 3 will become one: CPL 02-00-032 of 04/11/1994 If the classification remains the same - consecutive number remains the same (hence the lowest number in some class. will not be 1,

e.g. STD 1-11.3 becomes STD 01-11-003 and is the lowest number in the STD 01-11 class) If the classification changes - numbers will be assigned sequentially by effective date e.g. PUB 8.4 A becomes IPC 00-00-001



directive number: effective date: subject: osha … · adm 3-0 ; adm 3.4a : ipc 01-00 : ipc...

Documents