disrupters in over 65 countries across the world i.e.d

• Disrupter Water Cannons• Standard and Electric Ammunition• Blasting Cap Containment• Carry Cases• Back Packs• EOD Equipment • R & D Availability

• Training• Laser Sights• Stands

Disrupters in over 65 Countries Across the World

1300 Graves Avenue • Oxnard, CA 93030-8014 • (805) 288-5250 • Fax (805) 288-5253 Website: Http//www.RoyalArms.com • E-mail: [email protected]

I.E.D.BombDisposalEquipment

RADC-9 RADC-12 RADC-18 & RADC-24

Honed to a mirror finish for improved Accuracy /Velocity and ease of cleaning. Accepts highpower loads and all commercial 12 Gauge. 24”Barrel has a unique tapper length that reducesoverall weight and allow robots arms to articulateeasily by removing the weight in front. The rearacts as a counter balance providing smooth opera-tion for robots.

DISRUPTER CANNONS

•Body length = 9.00” 12.00” 18.00" or 24”•O.A.L. = +.75” Breach Bolt•Weight = all under 8.25 Lbs•Machined from 17-4 Stainless•1.500" Diameter for strength •1.500" Diameter taper to 1.25” for Robot use on 24” •Precision gun drilled to .730”•Honed to a mirror finish

•3-1/2" 12 Gauge Chamber•Acme Threads - Quick solid lock up•2-1/2" Welded Body ring •6-1/4" Knurled back end•External Laser location hole•Chamfered exterior crown•Reduced Breech bolt length•6 & 7 Breach Bolt inserts for Electric and Time Fuse


RADC-9 KitKit includes:• Disrupter Cannon, Breech Bolt inserts (6 & 7)• HB-10 Electric Igniter • RDI Shock Tube Igniter• 4 Dz. Water Plug Sets• 12 Rounds PBB-70• 5 Rounds each PBA, PCA and SLUG• Stop plate w/ Bag Stand• Pelican 1450 custom case

Electric Ammunition at slightly higher price

RADC-9 Basic Includes RADC-BS, StopPlate, cleaning equipment and case w/ 6 and 7Breach Bolt Inserts

Royal Arms 18” Cannon Basic set in a box. Includes:• RADC 18 (Disrupter Cannon)• Breech Bolt with inserts for Time Fuse & ElectricShots • WP (water plug) • LC#1 (NEW Custom Case with foam)• PR (pushrod for cleaning)

LC-1 Kit

DISRUPTER CANNONS & KITS


RADC-18 KIT Cannon & Accessories Our Kit includes:• Disrupter Cannon with Breech Bolt inserts (6 & 7) • SL-500 Green Laser• Pushrod w/cleaning Mop• Dead Hammer• Disrupter Pole Stand and Cannon Holder with slide• HB-10 Electric Igniter • Electric Cable Reel• RDI Shock Tube igniter• 4 Dz. Water Plug Sets• 20 Rounds PBB-12E • 15 Rounds each PBA-12E & PCA-12E • 5 Rounds Slug-12E• 10 Rounds PCA• 12 Rounds PBB-7 • iM2950 Custom Storm Case

RADC-24 KIT Cannon & AccessoriesNo Laser or Laser Holder included in Standard Kit. In-LineLaser and Muzzle Break available as additional equipmentAmmunition not included in Kit

DD- Disposable DisrupterSingle use Disrupter perfect for long range trips No need to carry bulky orheavy equipment, just a few different loads and an igniter or 9V battery in apinch. Can be used with an optional stop ring for placement in Robots or hold-ers. Inexpensive alternative to dearmers. • DD-PCA Clayvon (clay/steel Mixture)• DD-PBA Copper Compressed• DD-Slug Hollow point (Solid steel )• DD-PBB Blank (Air or Water Shot)• DD-FB Flash BANG (Air ONLY!)• DD-CSL Customer Specified Load

DDRC- Recoilless Disposable Disrupter Samespecs as previous but RECOILLESS with adapter tube• DDRC-PCA Clayvon (clay/steel Mixture)• DDRC-PBA Copper Compressed• DDRC-Slug Hollow point (Solid steel )• DDRC-PBB Blank (Air or Water Shot)• DDRC-FB Flash BANG (Air ONLY!)• DDRC-CSL Customer Specified Load• RDD-T Recoilless Launch Tube Required for Recoileless Use

Multi-use unit NOT disposable

RADC-27mm Cannon & AccessoriesInformation on inside back page and atRoyalarms.com

DISRUPTER STANDS


PS Disrupter Pole StandFully adjustable base can be sand bagged to prevent blow over.Adjustable Up, Down, Left, Right, Angle up Angle down. Headinterchangeable with all Royal Arms Disrupters. Total Weight 15.5Lbs Height up to 9’ Smaller version w/18” poles fits in Travel Back PackBase T-section 1018 Steel Legs 6061 AluminumHead 6061 Aluminum Poles Aluminum w/pvc coverBottom Pole Steel w/PVC cover

RADC-BSThe 5” square Bag Stand is designed for use with all Cannons. Theincluded 1/4” Aluminum stop plate protects the bag from damageand the variously angled corners facilitate unlimited shooting angles.Top strap for carrying. Weight when filled 8 to 12 lbs. Dependingon fill. Total weigh of Cannon, Stop Plate and Bag Stand for the 18”cannon is approximately 18 -1/2 Lbs.

TBP Travel Back PackBack pack Intended for use where space is critical in air transport,repelling and remote operations. Unit carries cannons, igniters,ammunition, water, bag stand, shock tube and ground-wire reels.Separate Velcro® closures and pockets, retain individual itemssecurely and readily accessible for quick response. Side pocket car-ries Pole Stand with 18” legs Specify which cannon when ordering ,DD- Disposable Disrupters, Recoilless units, RADC-9, RADC-18,RADC-24, RADC-27 or PAN.

DUCKFOOT #DF3DDThis Revolutionary device can be used for IED EOD Bomb Disposalas well as Breaching, Multi-mount for ROBOT usage Depending onthe Robot mount, this may be attached vertically or horizontally toallow for multiple shots from one deployment. Precision machined6061 Aluminum


IGNITERS

STI Single Pen Shock Tube igniterSTI Body is made of Solid 6061 T-6 Aluminum that’s been milled out. Stainless SteelInternal parts, and a brass head with quick connect. Dual Safeties, one internal and one onthe body. Length 6-1/2” Dia. 1/2” Wt. 3 Oz.

ROYAL DUAL IGNITERRoyal Arms dual shock tube igniter is the smallest most reliable mechanical igniter on themarket today. It has been tested and proved in Iraq Afghanistan and other Hostile environ-ments. When your shot is on the line trust our RDI every time.

Weight: 0.75 lbs. Overall Length: 6” Overall Height: 1.325”w/ brass heads & connectors w/ Trigger button

Body Length: 4.950” Body Height: 0.635” Body Width: 1.5”

RDI Body Material: 6061 T6 Black anodized Aluminum

Firing Pins, Stops, Trigger, Primary Safety, Springs, Bolts & Cross Bar Material:made of Stainless and Steel- Zinc Coated for rust protection.

Receiver Heads: Knurled Brass 1.580” X 0.5” Connectors: Quick Connects

Dual Safeties: Primary Safety: Trigger Sear Block Rotate forward to engage Safety show-ing green S When rotated 180º backwards, shows a Red F for fire.

Secondary Safety: Quick release pins which blocks firing pins

RDI-QDB Quick detach block Navy style with clamp head. Requires additional clamp attachment to back of RDI for mounting.Sold individually and as a unit.

BBI-8K Shock tube Breach Bolt KitBreach bolt for use with all Royal Arms Cannons. Kit contains the SS BreachBolt w/magnetic inserts to hold SS ball (firing pin) 25 SS balls, the cleanoutextractor pin and 5 Push-fit connectors. Installation of this unit in a cannonconstitutes creation of a fire arm and is required to be registered with ATF.Purchase of this item will be on separate PO and billed on separate Invoice.


BHQ (Lower Base Half)Replacement Brass Head for Any Shock tube igniter with 7/16-20 threads(Mark 54, Mark 55, Omni, DX10 RDI, STI) • Slotted back for easy extraction • Lower half base unit that accepts the primer

BH-OSC (Upper Half)(1 needed per unit)Compression Fit holds in Shock Tube from .080 - .150 Dia.

STC-B Upper Half Push-fit1/8” Instant fit for use with standard Commercial Shock tube Blue topSTC-B2 Upper Half Push-fit5/32 Instant fit for use with Military Grade Nonel Shock tube Black topSTC-B4 Upper Half Push-fit1/4 Instant fit for use with Time Fuse

FROM LEFT TO RIGHT BHQ w/ STC-BBHQ w/ STC-B2BHQBH-OSCBHQ w/ BH-OSC

STC-Y Connectors Steel Instant fit Shock tube connector 1 line in - 2 lines outSTC-Y2 Nylon Instant fit Shock tube connector Y fitting1 line in - 2 lines outSTC-Y3 Brass Nickel Plate Instant fit Shock tube connector Y fitting 1 line in - 2 lines out

STC-I Inline Connectors Steel Instant fit Inline Shock tube couplerSTC-I2 Nylon Instant fit Inline Shock tube coupler

We suggest you change your BH (Brass Heads) to our new style units with more options available for connections.Parts used on our earlier Canons, are available in limited quantities.

WP Water Plug Sets Can also be used to keep dirt and debris out of cannon while not in use. Black plug seals chamber. Red plug seals muzzle

CONNECTORS

AMMUNITIONComplete line of 12 Gauge Disrupter Ammunition


PBB-3, 5, 7 & UVE Standard Prime BlankPBB-3E 5E, 12E & UVE Electric Blanks Standard primed and Electric low and hign powered blanks for use withWater/ SNOT or air Shots Velocity: see ammo spec sheetDistance: 1”- 6” or to 3 Feet with SNOT Angle: Various Target: PVC Pipe, Brief/Suite Cases, Ammo Cans

STANDARD PRIMED ELECTRIC PRIMED

PBA Copper Frangible Standard and PBA-12E Electric 420 Grain Frangible Copper projectile for pipe bomb and Grenades Velocity: 2,390 Ft p/sec -18” BarrelDistance: 6”- 30 FeetAngle: 7º-11º or 90ºTarget: Grenades (cast only), Pipe to 2 1/2”

PCA Standard and PCA-12E Electric Clay S/70 Steel365 Grain Clay S/70 Steel mix for All Pipe bombs and galvanizedIED’sVelocity: 2,450 Ft p/sec -18” BarrelDistance: 6”- 60 FeetAngle: 7º-11º or 90ºTarget: Ammo cans, and pipes to 2.5”

SLUG Standard & SLUG-12E Electric Hollow Point541 Grain Hollow Point 4130 Steel hardened to 58-62 Rockwell Velocity: 2,260 Ft p/sec -18” Barrel Standard Velocity: 2,190 Ft p/sec -18” Barrel ElectricDistance: 6”- 30 FeetAngle: VariousTarget: Grenades, Copper IED’s, 3/8 Steel plate, galvanized

pipe, 90º pipe and internal thread pipe bombs CPA Penetrator Point CPA-12E Penetrator Point625 Gr. Penetrator Point 4130 Steel hardened to 58-62 Rockwell for Velocity: 2,370 Ft p/sec -18” Barrel StandardVelocity: 2,340 Ft p/sec -18” Barrel ElectricDistance: 6”- 30 FeetAngle: 90º or 0º onlyTarget: CO2 Bottles, 3/8 Steel plate, Heavy Duty galvanized

pipe, reinforced IED

REELElectric Cable reel with Red and Black Coated connections for easy Hookup. Anchor on body makes it easy to wind up and Has 310 feet of cableso you have enough room to stand clear. Weighs just 5 lbs and is 12x9x4

T Reel-E Equipped with electric cable 5” Dia. w/ 200 feet of cable. Made of polyurethane. The primary handleis cam mounted to spin Free and fold flat to the side. The secondaryhandle is Removable. Individual blank reels, TRB are available withand without handles. Change time for handles is less than 30 seconds.

DSL Demolition Safety Light Electrical continuity tester.• Reads 10+Mil-Spec blasting caps over 3000 feet of 22 Ga wire.• Over 120 hours of continuous duty or 90,000 five-second circuit tests.• LED “On” indicates a good circuit - readable in direct sunlight.• Lightweight waterproof polymer housing designed for positive “feel”.• Output of less than 5 milli-amps. • Size 1-3/4” X 3/4” - Total weight 1-3/4 ounce• All Mil-Spec components. • 900% safety factor.• Seven year shelf life. - Guaranteed.

EIT-CT Pull String Continuity tester for firing circuits and explosive devices.

• LED “On” indicates a good circuit • EXTRA bright Readable in direct sunlight.• Lightweight waterproof polymer housing • Output of less than 5 milli-amps. • All Mil-Spec components.• 900% safety factor• Pull String belt clip


EBM-15 Electric Blasting Machine w/ Built in ContinuityRoyal Arms Contracted with EIT corp to have the ultimate in reliableand safe blasting machines for use in Blasting or EOD IED demolitions. • 150VDC 1.25 Joules 50 Ohm 9V Battery• Wareproof - Impact Resistant • Pushbutton Switch Protectors• Quick Connect Binding Posts • 2 Second Charge Fire• Compact 3 ” w x 1.5”d x 4”h design • Built in Redundant Safeties • Separate circuit for Continuity & Fire

ELECTRICAL

Kit Accessories & Misc.

DH- Dead HammerFor opening Breech Bolt when locked shut. Hit hammer on end ofbolt to knock loose

PR Push RodThree piece Cleaning/extraction rod and brush. Used to clean as well as extract shells. The Rear section seats the water plugto the proper depth (shown at left). PR-1 (not Pictured) has an additional section for the RADC-2/D cannon & the RADC-24


SL-500 LASERThe SL-500 uses an ultra bright green laser which

is 50 to 100 times brighter than red lasers, and ismuch easier to see in daylight. The SL-500 usesone DL 123 Lithium Battery (included) thatprovides a battery life of up to 10 hours(continuous use). The SL-500 uses the latest lasertechnology to provide superior boresightingaccuracy. Super-strong magnets in the arborsecurely centers the laser within the muzzle for consistent accuracy. A unique system of adapters and O-rings make for asnug accurate fit.

TI-MB Titanium Muzzle Brake Fits RADC-24 Cannons and all 1.125 barrels. Will work with Robot mountsand not interfere. Significantly reduces recoil on robot arms, by up to 80%and retards the muzzle blast allowing you to get even closer on water shotsor other slug shots

ESMK2 EOD / ICE MirrorReplaceable Acrylic 10” x 10” Mirror Heat / Cold Shatter ResistantHead rotates 210º Quick change for additional tools or longer pole.Supplied with 4ft pole expandable to 8ft - Aluminum fittings standard thread for most extension polesFolds flat for storageSoft zippered case holds assembled unit with supplied pole and 2 additional mirrors units

DC-6 Dual Blasting Cap CrimperKey Features:

1. Dual Blasting Cap Crimper, Fuse Cutter & Explosive Punch2. Symmetrical uniform Teeth3. Balistic Nylon Case, Velcro Closure w/Belt Loop4. Non-reflective Anodized Matte finish

Technical Specs:• Length: 7.05 in. (179mm)• Width: 1.750 in. (44.5mm)• Thickness: 0.35 in. (8.9mm)• Weight: 3 oz. (0.09 kg)• Powder Punch Diameter: .25 in. (6.5mm )• Powder Punch Length: 2.2 in. (56mm) • Materials: 7075 Hi Strength Billet Aircraft Aluminum • Mil Spec Type III Class II Hard Black Anodized Finish to RC 50


DC-5 Det Cord / Shock Tube CutterKey Features:

1. Dual Edge Razor Blade w/ guillotine action cutting2. German Stainless Steel Razor Blade 3. Balistic Nylon Case, Velcro Closure w/Belt Loop4. Non-reflective Anodized Matte finish

Technical Specs:• Length: 6.85 in. (174mm)• Width: 1.625 in. (41.25mm)• Thickness: 0.35 in. (8.9mm)• Weight: 3 oz. (0.09 kg)• Materials: 7075 Hi Strength Billet Aircraft Aluminum• Blade: 316 Surgical German Stainless • Mil Spec Type III Class II Hard Black Anodized Finish to RC 50

EOD TOOLS

FBG-MKII FlashBang Grenade / Trainer• Impact Accuated Instantanious• Double Safety Pull Pin /With or without Spoon• 209 Primer training insert• Concussion / Sound Disorientation• 12 Gauge Blank Ammunition• 185db at 1-1/2 Atmosphere of preasure• Kit containes Body, Spoon, Pull Pin, Shell Extracter

Primer training insert, 100pcs - 209 PrimersSample Deployment Rounds

FBC Ammunition Ammunition sold in 25 round box

BREECH BOLT:• 2 spring loaded Contact Connectors • Relived back end for easy connection • Fully chamfered edges • Delrin Encased firing pin • Machined from 17-4 Stainless

CARTRIDGE CAPACITY:• Will Accept the following Cartridges

PT1066 L46A1 PS65MkII • Variety of slugs & Frangible's Available• Holds approximately 200mL of Water• Interchangeable nose cones


27MM Cannon

RADC-27 27MM Disrupter Cannon#RADC-27 Disrupter Cannons are machined from 17-4 Stainless Steel 37mm Diameterfor strength and durability. Precision gun drilled to 27mm then Honed to a mirror finish for improvedAccuracy & Velocity. Chamfered exterior crown for smooth transfer. 6-1/4" Knurled back end for a bet-ter grip. Melonite finish for strength, anti glare and smooth finish. Electric Breach Bolt

DISRUPTER CANNON:• Body length = 18.000" / 457mm• O.A.L. = 19.500" / 495mm• Body O.D. = 1.500” / 38mm• Bore Dia = 1.062” / 27mm• Weight = 6.5 Lbs / 2.95 Kg • Machined from 17-4 Stainless • Precision gun drilled to 1.062” / 27mm • Honed to a mirror finish • Acme Threads - Quick solid lock up • Knurled back end 6.250” / 159mm • Threaded Nose w/Cap to accept Recoil Reducer • Proper exterior crown chamfer • 2-1/2" Welded Body ring Optional• Melonite coated

ROYAL ARMS INTERNATIONAL, Inc, based in Oxnard, California manufactures the finest Bomb Disposal equipmentfor Law Enforcement, Military & Government Agencies, worldwide, bar none. With great pride and a strong commit-ment to quality, Royal Arms offers a leading line of precision-engineered, durable and effective products. Our line ismanufactured using the highest Quality Alloys and state of the art manufacturing techniques. The result is a superiorproduct, with enhanced technical capabilities, which in turn offers law enforcement and military personnel the ultimatetactical advantage in the field.

NOT ONLY ARE OUR PRODUCTS BACKED UP BY AN UNCONDITIONAL LIFETIME WARRANTY THEY AREALSO 100% PROUDLY MADE IN THE USA.

ROYAL ARMS is well known the world over for our Bomb Disposal, Explosive Entry Equipment as well as the ammu-nition needed to effectively answer any situation thru our multiple offerings. We continue to manufacture cutting edgeitems to answer the needs of the EOD community. Always looking to help the Bomb Tech, we welcome inquiries forspecialized equipment or ammunition.

ROYAL ARMS believes in American industry so strongly that when presented with the possibility of out-sourcing ourproducts/labor and materials to China, India or Mexico, Royal Arms International has declined these money saving pro-cedures. Instead, we invested in our infra-structure by acquiring a 10,000 square foot facility located in Oxnard, CA, tobetter serve our customer needs and to support the manufacturing in the United States.

As other companies are raising prices by as much as 60% and cutting jobs, here at Royal Arms, we are finding newways to be more efficient and reduce our manufacturing costs. We pass the savings on to you by not raising prices.Royal Arms principals are founded on making quality products at fair prices, being loyal to our customers and listeningto their needs.

We encourage you to stop by our shop for a tour of our manufacturing facility and production. We want you to witnessfirst hand for yourself our commitment to quality and customer service. Ask yourself how important it is to have aproduct MADE IN THE U.S.A. by American Ingenuity. We look forward to hearing from you.

GOD BLESS THE U.S.A. and our firearms.

MADE IN AMERICABY AMERICANS


disrupters in over 65 countries across the world i.e.d

Documents