Heating/Cooling Solutions

Uponor Radiant heating /coolingPE-Xa system

Uponor Provario manifold

01-06 © Uponor 2006 Page 3

Uponor Provario manifold

01-06 © Uponor 2006 Page 4

• Last segment with air vent

valve and refill and drain valve with G3/4 hose connection

• Low mounting depth

with/without thermometer 78/68 mm

• Short total length:

for example 6 loops 515 mm

Uponor Provario manifold

01-06 © Uponor 2006 Page 5

• Manifold/collector made of

fibre-glass reinforced polyamid

• 2-12 loops

(EUROCONUS connection)

• With balancing screw

• With topmeter

(indication 0-4 l/min) availible

• Supply valve insert complete

made of plastic

• Return valve insert complete

made of plastic

(without the axis)

Uponor Provario manifold

01-06 © Uponor 2006 Page 6

• With flat sealing connection screw G1

• Connection side could be changed as necessary:

left/right/two-way/down/up

Uponor Provario manifold

01-06 © Uponor 2006 Page 7

Uponor Provario manifold

Field of application

Radiant heating and cooling:

• Operating temperature /pressure

max. 60°C at 6 bar

• Test pressure max. 10 bar (water)

• Test pressure max. 5 bar for max. 2 hours (air) Carry out test procedure according pressure test report

• max. mass flow per manifold 3,5 m³/h

• max. mass flow indication 240 l/h

01-06 © Uponor 2006 Page 8

Figured out accessories

• Uponor Provario hose connection to refilland drain valve

• Uponor Provario Thermometer 0-60°C

• Uponor Provario elbow connection set

• Uponor Provario retaining ring set

• Uponor Provario single segment

• Uponor Provario connection set to

constant temperature supply unit

01-06 © Uponor 2006 Page 9

Simple mounting

Mount the bracket Click in and READY

01-06 © Uponor 2006 Page 10

Valve adjustment without tools

• Lift the adjustment ring

• Adjust calculated value 0-11

• Press down the adjustment ring

• Open hand wheel until the limit stop

• READY!

01-06 © Uponor 2006 Page 11

Exploded view

Uponor Provario manifold

01-06 © Uponor 2006 Page 12

All advantage at one glance

• Easy mounting with click in technology

• Low mounting depth ⇒ could be easily used for light weight construction

• Established plastic technology with fibre-glass reinforcedpolyamid

• Available with balancing screw or with topmeter

• Easy valve adjustment without tools

• With refill and drain valve

• Many different connection possibilities

01-06 © Uponor 2006 Page 13

Manifold valves

• Strengthened hand wheel• Integrated air vent • optimised valve plate in return

valve• Test pressure ≤ 10bar (water)

respectively ≤ 5bar with air

01-06 © Uponor 2006 Page 14

Uponor Provario manifoldProduct assortment

11 manifolds

Alternatively with topmeter or balancing screw

01-06 © Uponor 2006 Page 15

Thank you for your kind attention