div14_appendix.pdf

8/14/2019 DIV14_Appendix.pdf

1/20

R&M Materials Handling, Inc.4501 Gateway Boulevard

Springfield, Ohio 45502: (937) 328-5100

FAX: (937) 325-5319www.rmhoist.com

Appendix forCranes and Hoist Division 14600 Specification

highlighting R&M Materials Handling, Inc hoist and cranecomponents

1) Appendix A Hoist Classifications

2) Appendix B Crane Classifications3) Top Running Single Girder Crane 2, 3, 5, 7 &10 Ton drawing

4) Top Running Single Girder Crane 2, 3, 5, 7 &10 Ton dimensions5) Top Running Double Girder Crane 5, 7 , 10, 15 & 20 ton drawing

6) Top Running Double Girder Crane 5, 7 , 10, 15 & 20 ton dimensions7) Top Running Double Girder Crane 25, 30, 35 & 40 ton drawing

8) Top Running Double Girder Crane 25, 30, 35 & 40 ton dimensions

9) Under Running Single Girder Crane 2, 3, & 5 Ton drawing

10) Under Running Single Girder Crane 2, 3, & 5 Ton dimensions11) Under Running Single Girder Crane 7 & 10 Ton drawing

12) Under Running Single Girder Crane 7 & 10 Ton dimensions


2/20

Appendix A

HOIST CLASSIFICATIONS

H1 STANDBY OR INFREQUENT SERVICE

Powerhouse and Utilities, infrequent handling. Hoists used primarily to install and service heavyequipment, where loads frequently approach hoist capacity, with periods of utilization being

infrequent and widely scattered.

H2 LIGHT SERVICE

Light machine shop and fabricating industries and service and maintenance work, where loads

and utilization are randomly distributed with capacity loads infrequently handled, and wheretotal running time of equipment does not exceed 10-15% of the work period.

H3 STANDARD SERVICE

General machine shop, fabricating, assembly, storage and warehousing, where loads and

utilization are randomly distributed, with total running time of equipment not exceeding 15-25%of the work period.

H4 HEAVY SERVICE

High volume handling in steel warehousing, machine shops, fabricating plants, mills and

foundries. Manual or automatic cycling operations in heat treating and plating operations. Totalrunning time of equipment normally approaches 25-50% of work period, with loads at or near

rated capacity frequently handled.

H5 SEVERE SERVICE

Bulk handling of material in combination with buckets, magnets, or other heavy attachments.Equipment often cab operated. Duty cycles approaching continuous operation are frequently

necessary. User must specify exact details of operation, including weight of attachments.

H1 STANDBY OR INFREQUENT SERVICE

B-10 bearing life: 1250 hours


3/20

H2 LIGHT SERVICE


2 to 5 lifts per hour, averaging 10 feet per lift.Maximum "on time" per hour: 7-1/2 minutesMaximum "starts" per hour: 75

If equipment has infrequent periods of operation:

Maximum "on time" per hour: 15 minutesMaximum "starts" per hour: 100

H3 STANDARD SERVICE

B-10 bearing life: 5000 hours5 to 10 lifts per hour, averaging 15 feet per lift.

Average of lifts to not exceed 50 percent of rated capacity.

Not over 50 percent of the lifts at rated capacity.Maximum "on time" per hour: 15 minutes

Maximum "starts" per hour: 150

If equipment has infrequent periods of operation:Maximum "on time" per hour: 30 minutes

Maximum "starts" per hour: 200

H4 HEAVY SERVICE


10 to 20 lifts per hour averaging 15 feet per lift.Average of lifts to not exceed 65 percent of rated capacity.

Not over 65 percent of the lifts at rated capacity.

Maximum "on time" per hour: 30 minutesMaximum "starts" per hour: 300

H5 SEVERE SERVICE


20 or more lifts per hour at or near the rated capacity.


4/20

Appendix B

CRANE CLASSIFICATIONS

CLASS A STANDBY OR INFREQUENT SERVICE

This service class covers cranes which may be used in installations such as powerhouses, public

utilities, turbine rooms, motor rooms and transformer stations where precise handling of equipmentat slow speeds with long, idle periods between lifts are required. Capacity loads may be handled for

initial installation of equipment and for infrequent maintenance.

CLASS B LIGHT SERVICE

This service covers cranes which may be used in repair shops, light assembly operations, service

buildings, light warehousing, etc., where service requirements are light and the speed is slow.Loads may vary from no load to occasional full rated loads with two to five lifts per hour, averaging

ten feet per lift.

CLASS C MODERATE SERVICE

This service covers cranes which may be used in machine shops or papermill machine rooms, etc.,

where service requirements are moderate. In this type of service the crane will handle loads whichaverage 50 percent of the rated capacity with 5 to 10 lifts per hour, averaging 15 feet, not over 50

percent of the lift at rated capacity.

CLASS D HEAVY SERVICE

This service covers cranes which may be used in heavy machine shops, foundries, fabricating

plants, steel warehouses, container yards, lumber mills, etc., and standard duty bucket and magnet

operations where heavy duty production is required. In this type of service, loads approaching 50percent of the rated capacity will be handled constantly during the working period. High speeds are

desirable for this type of service with 10 to 20 lifts per hour averaging 15 feet, not over 65 percent

of the lifts at rated capacity.

CLASS E SEVERE SERVICE

This type of service requires a crane capable of handling loads approaching a rated capacitythroughout its life. Applications may include magnet, bucket, magnet/bucket combination cranes

for scrap yards cement mills lumber mills fertilizer plants container handling etc with twenty or


5/20

Appendix B

CRANE CLASSIFICATIONS

CLASS A STANDBY OR INFREQUENT SERVICE

AFBMA L-10 bearing life: 1250 hoursSystem has long idle periods.

Capacity loads for initial installation and for infrequent maintenance.

CLASS B LIGHT SERVICE

AFBMA L-10 bearing life: 2500 hours

2 to 5 lifts per hour, averaging 10 feet per lift.Vary from no load to only occasional full load.

CLASS C MODERATE SERVICE


5 to 10 lifts per hour, averaging 15 feet per lift.

Average of lifts to not exceed 50 percent of rated capacity.Not over 50 percent of the lifts at rated capacity.

CLASS D HEAVY SERVICE

AFBMA L-10 bearing life: 10000 hours10 to 20 lifts per hour averaging 15 feet per lift.

Average of lifts to not exceed 65 percent of rated capacity.

Not over 65 percent of the lifts at rated capacity.

CLASS E SEVERE SERVICE

AFBMA L-10 bearing life: 20000 hours20 or more lifts per hour at or near the rated capacity.

CLASS F CONTINUOUS SEVERE SERVICE



6/20


7/20


8/20


9/20

Load(lb)

Span A B C F L RMin.

1Min.

2WheelBase

TruckLength

WheelLoad(kips)

CraneWeight

(lbs)

HoistWt.(lbs)

RailType

Lift Hoist Model

20000 35'-0" 3'-4 3/4" 3'-11" 2'-3 1/2" -6 -1/4" 7 1/8" 5 7/8" 3'-1" 3'-1" 7'-2 5/8" 8'-5 3/4" 11.8 8300 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F

20000 40'-0" 3'-4 3/4" 3'-11" 2'-3 1/2" -6 -1/4" 7 1/8" 5 7/8" 3'-1" 3'-1" 7'-2 5/8" 8'-5 3/4" 12.1 9090 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F20000 45'-0" 3'-7 1/2" 4'-2" 2'-6 3/8" -6 -1/4" 7 1/8" 5 7/8" 3'-1" 3'-1" 7'-2 5/8" 8'-7" 12.6 10560 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F

20000 50'-0" 3'-5" 3'-11" 2'-3 3/4" -5 -5/8" 7 1/8" 5 7/8" 3'-1" 3'-1" 7'-2 5/8" 8'-7" 13 11470 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F

20000 55'-0" 3'-7 3/4" 4'-2" 2'-6 5/8" 3 5/8" 7 1/4" 5 7/8" 3'-1" 3'-1" 8'-10 5/16" 10'-2 5/8" 13.5 13400 1320 ASCE60 29'-6 5/16" 50410100P55FDL0F

20000 60'-0" 3'-10 5/8" 4'-5" 2'-9 3/8" 3 1/8" 7 1/4" 5 7/8" 3'-1" 3'-1" 8'-10 5/16" 10'-2 5/8" 14 15130 1320 ASCE60 29'-6 5/16" 50410100P55FDL0F

20000 65'-0" 3'-10 3/4" 4'-6" 2'-9 1/2" 9 3/4" 7 1/8" 5 7/8" 3'-1" 3'-1" 10'-2 1/16" 11'-6 3/8" 14 14910 1320 ASCE60 29'-6 5/16" 50410100P55FDL0F

20000 70'-0" 4'-4 3/8" 4'-11" 3'-3 1/8" 10 1/2" 7 1/4" 5 7/8" 3'-1" 3'-1" 10'-2 1/16" 11'-7 3/4" 14.3 16090 1320 ASCE60 29'-6 5/16" 50410100P55FDL0F

20000 75'-0" 4'-4 7/8" 5'-0" 3'-3 3/8" 2'-1 3/8" 7 3/4" 5 7/8" 3'-3" 3'-3" 12'-5 5/8" 14'-1 5/8" 15.2 19620 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F

20000 80'-0" 4'-5" 5'-0" 3'-3 1/2" 2'-1 3/8" 7 3/4" 5 7/8" 3'-4" 3'-3" 12'-5 5/8" 14'-1 5/8" 15.6 21230 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F

20000 85'-0" 4'-10 5/8" 5'-7" 3'-9 1/8" 1'-11 7/8" 7 3/4" 5 7/8" 3'-11" 3'-3" 12'-5 5/8" 14'-1 5/8" 15.8 21960 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F

20000 90'-0" 5'-8 3/8" 6'-1" 4'-3" 3'-1 3/4" 7 3/4" 5 7/8" 3'-11" 3'-3" 14'-9 3/16" 16'-5 1/4" 16.3 23760 1320 ASCE40 29'-6 5/16" 50410100P55FDL0F

20000 95'-0" 5'-8 3/8" 6'-1" 4'-3" 3'-1 3/4" 7 3/4" 5 7/8" 4'-6" 3'-3" 14'-9 3/16" 16'-5 1/4" 16.5 24820 1320 ASCE60 29'-6 5/16" 50410100P55FDL0F

Page 3 of 3


10/20


11/20


12/20


13/20

Page 3 of 3

Load(lb)

Span A B C F L RMin.

1Min.

2WheelBase

TruckLength

WheelLoad(kips)

CraneWeight

(lbs)

HoistWeight

(lbs)

RailType

Lift Hoist Model

40000 35'-0" 4'-4 3/8" 3'-9" 3'-3 1/8" -3/4" 8 1/8" 5 7/8" 2'-4" 2'-2" 10'-2 1/16" 11'-8 3/4" 23.4 12790 2130 ASCE60 26'-2 15/16" 50810200P64HFD0S

40000 40'-0" 4'-4 1/2" 3'-9" 3'-3 1/4" -1/8" 8 1/8" 5 7/8" 2'-4" 2'-2" 10'-2 1/16" 11'-10 1/8" 24 14770 2130 ASCE60 26'-2 15/16" 50810200P64HFD0S

40000 45'-0" 4'-7 1/2" 3'-9" 3'-6 1/4" -3/8" 8" 5 7/8" 2'-4" 2'-2" 10'-2 1/16" 11'-10 1/8" 24.9 17880 2130 ASCE80 26'-2 15/16" 50810200P64HFD0S

40000 50'-0" 4'-10 5/8" 3'-9" 3'-9 3/8" -7/8" 8" 5 7/8" 2'-4" 2'-2" 10'-2 1/16" 11'-10 1/8" 26.1 22370 2130 ASCE85 26'-2 15/16" 50810200P64HFD0S

40000 55'-0" 5'-3 1/2" 3'-9" 4'-1/8" 1/8" 8 1/8" 5 7/8" 2'-4" 2'-2" 10'-2 1/16" 12'-1" 27.2 26220 2130 ASCE60 26'-2 15/16" 50810200P64HFD0S

40000 60'-0" 5'-3 3/4" 3'-9" 4'-3/8" 0" 8 1/8" 5 7/8" 2'-4" 2'-2" 10'-2 1/16" 12'-1" 28.2 29960 2130 ASCE60 26'-2 15/16" 50810200P64HFD0S

40000 65'-0" 6'-8 3/4" 3'-9" 5'-5 3/8" 7 1/2" 7 3/4" 5 7/8" 2'-4" 2'-2" 12'-5 5/8" 14'-4 5/8" 27.2 27280 2070 ASCE60 26'-2 15/16" 50810200P54FFD0F

40000 70'-0" 6'-8 3/4" 3'-9" 5'-5 3/8" 7 1/2" 7 3/4" 5 7/8" 2'-4" 2'-2" 12'-5 5/8" 14'-4 5/8" 27.5 27680 2070 ASCE60 26'-2 15/16" 50810200P54FFD0F

40000 75'-0" 6'-8 3/4" 3'-9" 5'-5 3/8" 7 1/2" 7 3/4" 5 7/8" 2'-4" 2'-2" 12'-5 5/8" 14'-4 5/8" 28 29240 2070 ASCE60 26'-2 15/16" 50810200P54FFD0F

40000 80'-0" 6'-8 3/4" 3'-9" 5'-5 3/8" 4 1/2" 7 3/4" 5 7/8" 2'-4" 2'-2" 12'-5 5/8" 14'-4 5/8" 28.7 32060 2070 ASCE60 26'-2 15/16" 50810200P54FFD0F

40000 85'-0" 6'-9" 3'-9" 5'-5 5/8" 7 1/2" 7 3/4" 5 7/8" 2'-4" 2'-2" 12'-5 5/8" 14'-4 5/8" 29.4 34950 2070 ASCE60 26'-2 15/16" 50810200P54FFD0F

40000 90'-0" 7'-3 3/4" 3'-9" 5'-5 3/4" 1'-6 1/4" 7 3/4" 5 7/8" 2'-4" 2'-2" 14'-9 3/16" 16'-8 1/8" 30.7 40330 2070 ASCE80 26'-2 15/16" 50810200P54FFD0F

40000 95'-0" 7'-3 7/8" 3'-9" 5'-5 7/8" 1'-7" 7 3/4" 5 7/8" 2'-4" 2'-2" 14'-9 3/16" 16'-9 3/4" 31.6 43920 2070 ASCE80 26'-2 15/16" 50810200P54FFD0F


14/20


15/20


16/20


17/20


18/20

Under Running Single Girder Crane

Load(lb)

Span A C F L R UMin.

1Min.

2WheelBase

TruckLength

WheelLoad(kips)

CraneWeight

(lbs)

HoistWeight

(lbs)Hoist Model

15000 35'-0" 9 7/8" 1'-9 3/4" -8 1/2" 1'-1 1/4" 3 1/2" 3'-5 1/2" 3'-5" 2'-5" 5'-10 7/8" 7'-11 5/8" 9.5 9050 1320 50410080P56FDL0F

15000 40'-0" 9 7/8" 1'-9 3/4" -8 1/2" 1'-1 1/4" 3 1/2" 3'-5 1/2" 3'-5" 2'-5" 5'-10 7/8" 7'-11 5/8" 9.8 9240 1320 50410080P56FDL0F

15000 45'-0" 9 7/8" 2'-5/8" -8 1/2" 1'-1 1/4" 3 1/2" 3'-8 3/8" 3'-5" 2'-5" 5'-10 7/8" 8'-3/4" 10.3 10490 1320 50410080P56FDL0F

15000 50'-0" 9 7/8" 2'-6 1/8" -1 3/8" 1'-1 1/4" 3 1/2" 4'-2" 3'-5" 2'-5" 7'-2 5/8" 9'-7 3/8" 10.7 12130 1320 50410080P56FDL0F

15000 55'-0" 9 7/8" 2'-6 3/8" -1 3/8" 1'-1 1/4" 3 1/2" 4'-2 1/8" 3'-5" 2'-5" 7'-2 5/8" 9'-4 1/2" 11.2 13790 1320 50410080P56FDL0F

15000 60'-0" 9 7/8" 2'-9 1/4" 9 7/8" 1'-1 1/4" 3 1/2" 4'-5" 3'-5" 2'-5" 9'-2 1/4" 11'-4 1/8" 11.7 15630 1320 50410080P56FDL0F

20000 35'-0" 9 7/8" 2'-3 1/2" -9 3/8" 1'-1 1/4" 3 1/2" 3'-11 1/4" 3'-5" 2'-5" 5'-10 7/8" 7'-11 5/8" 12.1 9580 1320 50410100P55FDL0F

20000 40'-0" 9 7/8" 2'-6 3/8" -9 1/4" 1'-1 1/4" 3 1/2" 4'-2 1/8" 3'-5" 2'-5" 5'-10 7/8" 8'-3/4" 12.6 10980 1320 50410100P55FDL0F

20000 45'-0" 9 7/8" 2'-3 3/4" -8 3/4" 1'-1 1/4" 3 1/2" 3'-11 3/8" 3'-5" 2'-5" 5'-10 7/8" 8'-3/4" 12.9 11890 1320 50410100P55FDL0F

20000 50'-0" 9 7/8" 2'-3 3/4" -7/8" 1'-1 1/4" 3 1/2" 3'-11 3/8" 3'-5" 2'-5" 7'-2 5/8" 9'-4 1/2" 13.3 12960 1320 50410100P55FDL0F

20000 55'-0" 9 7/8" 2'-6 5/8" 0" 1'-1 1/4" 3 1/2" 4'-2 1/4" 3'-5" 2'-5" 7'-2 5/8" 9'-7 3/8" 13.8 14720 1320 50410100P55FDL0F

20000 60'-0" 9 7/8" 2'-9 3/8" 11 3/8" 1'-1 1/4" 3 1/2" 4'-5 1/8" 3'-5" 2'-5" 9'-2 1/4" 11'-7" 14.3 16750 1320 50410100P55FDL0F


19/20


20/20

Under Running Single Girder Crane

Load(lb)

Span A B C F L R UMin.

1Min.

2WheelBase

TruckLength

WheelLoad(kips)

CraneWeight

(lbs)

HoistWeight

(lbs)Hoist Model

4000 35'-0" 5 1/2" 3'-5" 1'-3" -1 7/8 1'-3 7/8" 6 1/2" 2'-3 1/2" 7" 9" 5'-10 7/8" 7'-6 3/4" 3.4 4240 490 20410020P15FAL0F

4000 40'-0" 5 1/2" 3'-7" 1'-4 5/8" -1 7/8 1'-3 7/8" 6 1/2" 2'-5 1/8" 7" 9" 5'-10 7/8" 7'-6 3/4" 3.5 4680 490 20410020P15FAL0F

4000 45'-0" 5 1/2" 3'-10" 1'-7 1/8" -2" 1'-3 7/8" 6 1/2" 2'-7 3/4" 7" 9" 5'-10 7/8" 7'-6 3/4" 3.7 5330 490 20410020P15FAL0F

4000 50'-0" 5 1/2" 3'-10" 1'-7 1/4" 5 7/8" 1'-3 7/8" 6 1/2" 2'-7 7/8" 7" 9" 7'-2 5/8" 8'-10 1/2" 4 6330 490 20410020P15FAL0F

4000 55'-0" 5 1/2" 4'-0" 1'-9 3/8" 5 3/8" 1'-3 7/8" 6 1/2" 2'-10 3/8" 7" 9" 7'-2 5/8" 8'-10 1/2" 4.4 7820 490 20410020P15FAL0F

4000 60'-0" 5 1/2" 4'-0" 1'-9 1/2" 1'-5 1/4" 1'-3 7/8" 6 1/2" 2'-10 1/2" 7" 9" 9'-2 1/4" 10'-10 1/8" 4.7 9050 490 20410020P15FAL0F

6000 35'-0" 5 1/2" 3'-7" 1'-4 5/8" -1 7/8 1'-3 7/8" 6 1/2" 2'-5 1/8" 7" 9" 5'-10 7/8" 7'-6 3/4" 4.4 4320 490 20410020P15FAL0F

6000 40'-0" 5 1/2" 3'-10" 1'-7 1/8" -2" 1'-3 7/8" 6 1/2" 2'-7 3/4" 7" 9" 5'-10 7/8" 7'-6 3/4" 4.6 4940 490 20410020P15FAL0F

6000 45'-0" 5 1/2" 3'-10" 1'-7 1/4" 5 7/8" 1'-3 7/8" 6 1/2" 2'-7 7/8" 7" 9" 7'-2 5/8" 8'-10 1/2" 4.8 5890 490 20410020P15FAL0F

6000 50'-0" 5 1/2" 4'-0" 1'-9 3/8" 5 3/8" 1'-3 7/8" 6 1/2" 2'-10 3/8" 7" 9" 7'-2 5/8" 8'-10 1/2" 5.2 7280 490 20410020P15FAL0F

6000 55'-0" 6 3/8" 4'-2" 1'-9 1/2" 11 1/4" 1'-3 7/8" 6 5/8" 2'-10 1/2" 7" 9" 8'-2 7/16" 9'-10 3/8" 5.6 8690 490 20410020P15FAL0F

6000 60'-0" 6 3/8" 4'-5" 2'-3/8" 1'-4 5/8" 1'-3 7/8" 6 5/8" 3'-2 1/4" 7" 9" 9'-2 1/4" 10'-10 1/8" 6.1 10590 490 20410020P15FAL0F

10000 35'-0" 6 3/8" 4'-1" 1'-7 1/2" -4 7/8" 1'-3 7/8" 6 5/8" 2'-10 1/4" 1'-1" 1'-2" 5'-10 7/8" 7'-6 3/4" 7 6100 750 40410050P45HBL0F

10000 40'-0" 6 3/8" 4'-3" 1'-9 3/8" -4 7/8" 1'-3 7/8" 6 5/8" 3'-1/8" 1'-1" 1'-2" 5'-10 7/8" 7'-6 3/4" 7.1 6680 750 40410050P45HBL0F

10000 45'-0" 6 3/8" 4'-3" 1'-9 1/2" -4 7/8" 1'-3 7/8" 6 5/8" 3'-1/4" 1'-1" 1'-2" 5'-10 7/8" 7'-6 3/4" 7.3 7640 750 40410050P45HBL0F

10000 50'-0" 6 3/8" 4'-10" 2'-3" 4 1/4" 1'-3 7/8" 6 5/8" 3'-6 1/4" 1'-1" 1'-2" 7'-2 5/8" 9'-2 5/8" 7.7 9160 750 40410050P45HBL0F

10000 55'-0" 6 3/8" 4'-7" 2'-3/8" 4 1/2" 1'-3 7/8" 6 5/8" 3'-3 3/8" 1'-1" 1'-2" 7'-2 5/8" 9'-2 5/8" 8 10090 750 40410050P45HBL0F

10000 60'-0" 6 3/8" 5'-2" 2'-6 1/8" 8 1/8" 1'-3 7/8" 6 5/8" 3'-10" 1'-1" 1'-2" 8'-2 7/16" 9'-11 1/2" 8.6 12320 750 40410050P45HBL0F

div14_appendix.pdf

Documents