diy all steel shed frames

DIY ALL STEEL SHED FRAMES

FAST FIT FRAMES & CONNECTOR PRICES BELOW

THE BEST BUILDINGS START WITH A STEEL BUILDING FRAME

ALLOW 10-21 WORKING DAYS FROM DATE ORDERED FOR PRODUCTION & SHIPMENT READY

� PRICES FOR DO IT YOURSELF FRAMES ONLY IN 50 SIZES

� CONNECTOR PRICES – CONNECTORS OFFERED ARE MACHINE REDUCED ENDS ONLY

To see our product or to place an order Call RON 480 343 9571

Buy A Steel Building Frame OR Buy Just The Welded ”FAST FIT” Connectors

All FRAME prices are based on 2 ft centered hoop (frame) with steel floor joists , 8’high outer walls, 3/12 pitched roof with under peak entry

1. FRAME ONLY includes heavy duty 2X2 inch box tube steel frame on 2 ft centers with welded machine reduced connectors,

both end wall framing with door opening frame work, steel floor struts, angle brackets & fasteners. All units come with a 3/12

pitched roof unless ordered otherwise.

2. Barn roof design available in 10 ft wide & above only – Add 20% to prices below for barn prices.

3. Low profile building frames available for HOA compliance. CALL FOR PRICING

THE BEST BUILDINGS START WITH A STEEL BUILDING FRAMES

Prices below for complete frames include reduced/swaged connectors.

8 FT WIDE STEEL FRAME ONLY

8x6 = $533 8x8 = $644 8X10 = $757 8x12 = $870

8x14 = $983 8x16 = $1096 8X20 = $1322 8X24 = $1547


10x10 = $847 10x12 = $973 10x14 = $1099 10x16 = $1215

10x18 = $1351 10x20 = $1477 10x24 = $1729 10x30 = $2107


12x12 = $1051 12x14 = $1187 12x16 = $1323 12x18 = $1459

12x20 = $1595 12X22 = $1731 12x24 = $1864 12x26 = $2003

12x28 = $2139 12x30 = $2275


14x14 = $1246 14x16 = $1389 14x18 = $1532 14x20 = $1675

14x22 = $1818 14x24 = $1961 14X26 = $2104 14x28 = $2247

14x30 = $2400


16X16 = $1478 16X18 = $1630 16X20 = $1782 16X24 = $2086

16X28 = $2390 16X32 = $2694 16X36 = $2998 16X40 = $3302


18X18 = $1793 18X20 = $1963 18X24 = $2302 18X28 = $2643

18X32 = $2983 18X36 = $3323 18X40 = $3663

Add state tax AZ Only &r delivery of $75 in the valley - over 40 miles it is $3.00 per mile one way Prices can change w/o notice due to the volatility of the steel market & gas prices.

Connectors with Machine Reduced Ends

The Above Connectors Allow Assembly of Any Building on Our 50 Size Price List FAST & EASY.

Top two on the left are used when not putting in floor struts and applying it to a concrete slab

Top two on the right are used when putting in floor struts for a wood floor

Bottom 6 connectors make up the 3/12, 8/12 or barn roof lines offered.

This unpainted connector shows the reduced ends better than the painted ones above

CONCRETE SLAB/PIER BASE APPLICATION CONNECTORS WITH

4 ANCHOR HOLES AND REDUCED ENDS

FUNCTION OF STEEL WELDED “FAST FIT” CONNECTORS

WHEN ASSEMBLING AN “ALL STEEL SHED FRAMES”

HEAVY DUTY BUILDING FRAME

Part 812-WC & PC-812 - used to give the roof line a 8/12 pitch

Part 312-WC & PC-312 - used to give the roof line a 3/12 pitch

Parts PC-312, BPC-2412 & BRN-PC use when erecting a barn style.

Part 2WOCBR-111 - bottom rail connector when not putting in a floor

(USE 2WOCBR-111 & 3WI-115) WHEN ATTACHING TO GROUND OR CONCRETE

Part 3WI-115 - bottom rail connector interior for wall stud placement

Part LOCOE-110 - for all outside corners bottom rail & floor connector

(USE LOCOE-110 & 4WI-120) WHEN INSTALLING WOOD FLOOR IN BLDG

Part 4WI-120 - for all inside hoops to connect bottom rails & wall studs

BASE PLATE CONNECTOR 4 HOLE- anchors a steel frame to concrete

2” X 1 ¾” inch angle brackets – use these when placing door frames, window

frames, end wall members, etc.

2”x 4” inch flat bracket – use where two pieces of metal meet & need support.

Hex head self tapping fasteners - connect all parts into solid frame

SCROLL DOWN TO SEE THE 3 ROOF LINE STYLES WE OFFER

To see our product in the Phoenix, Az area or to place an order outside the Phoenix, Az area please call 480 343 9571

FAST FIT CONNECTOR PRICE LIST

WELDED “FAST FIT” MACHINE REDUCED CONNECTORS CONNECTOR ONLY ORDER FORM & PRICE LIST - PH - 480 343 9571

Connectors for 2x2 frame series come with machine/swage reduced ends. UD9711

ALL “FAST FIT” CONNECTORS WELDED OUT OF 2 INCH SQ HEAVY DUTY STRUCTURAL BOX TUBING.

(Contractor Prices)

*B = BARN STYLE ROOF / Reduced End / # Pcs Ordered = $ Amount

PART # 4WI-120 $18.95 = ________________ =_________________

PART # LOCOE-110 $15.95 = ________________ =_________________

PART # 2WOCBR-111 $12.95 =__________________ =_________________

PART # 3WI-115 $15.95 = _________________ =__________________

PART # PC-312 (*B) $12.95 = _________________ =__________________

PART # PC-812 $12.95 =_________________ =__________________

PART # 312-WC $12.95 =__________________ =__________________

PART # 812-WC $12.95 =__________________ =__________________

PART # BPC-2412 (*B) $12.95 =__________________ =__________________

PART # BRN-PC (*B) $12.95 =__________________ =__________________

BASE PLATE CONN W/4 HOLES $15.95 =__________________=__________________

WELDED 6’ FT HIGH STEEL ENTRANCE DOOR FRAMES ONLY 2’6” WIDE= $75 EA 3’FT WIDE = $85 EA

4’FT WIDE =- $95.00 EACH X # OF FRAMES NO HARDWARE INC =__________________

2”X 1 ¾” CLIP BRACKET $1.50 EA =__________________

2X4 FLT BRCKT $1.25 EA =__________________

100 pc 1” HX/ HEAD FASTENERS ZC $5.95 per 100 pcs QUANTITY______ X $5.95 =__________________

TOTAL AMOUNT FOR OUT OF STATE ORDER NO TAX CHARGED =__________________

ARIZONA RESIDENTS ADD 9.3% TAX TO PURCHASE PRICE =__________________

AMOUNT OF ORDER W/ TAX $___________________

ADD FOR FREIGHT OR DELIVER CHARGES – FOB PHOENIX AZ $___________________

TOTAL AMOUNT $____________________

Do-It-Yourselfers - Why Buy Just The “Fast Fit” Connectors

When buying just our welded “Fast Fit” connectors it allows anyone anywhere to erect a

quality steel framed building without having to hire an expensive welder or pour expensive

concrete. A welder would charge you to weld up a steel building frame on your site in any

one of our 50 sizes at least twice the price from our frames only price list. Then it would

take him 1 to 2 weeks to complete. When you buy just our welded “Fast Fit” connectors,

angles & fasteners for the size chosen we will ship along with the connectors a cut sheet for

you to take to your local steel service center so they can cut the long pieces for you such as

floor struts, wall studs & roof rake pieces. This allows you to capture the best of all worlds.

You will be able to build it yourself & save labor charges, you will be able to buy the

welded load bearing connectors & angles from us at the right price and we can ship the

“Fast Fit” connectors right to your door for a minimum shipping charge. Hence, by

buying your long steel locally you will not be paying double shipping on the majority of the

long steel that it takes to complete your steel frame. Any questions call Ron 480 343 9571

AN ALL STEEL SHED FRAME CAN BE USED TO BUILD JUST ABOUT

ANY BUILDING PROJECT YOU MIGHT WANT TO BUILD.

We Offer 50 Frame Sizes in 8-10-12-14-16-18 Ft Wide with 3 of the most popular roof lines.

We Can Build Any Width As Long As You Desire. All Frames Are Built On 2 Foot Centers In our

“Do It Yourself” “ALL STEEL SHED FRAME” Series.

One Can Make Just About Any Small To Medium Size Building With Our “FAST FIT” Connectors & Building System

OTHER APPLICATIONS OUR STEEL FRAMES HAVE BEEN USED FOR IN THE PAST:

SHEDS – WORK SHOPS - HORSE BARNS – SHED ROW HORSE STALLS - GARAGES – MOTORCYCLE GARAGES – CAR &

RV COVERS - ROOM ADDITIONS – GUARD HOUSES - FREE STANDING OFFICES – SAUNAS - PUMP & GENERATOR

HOUSES – PATIO COVERS - KIDS PLAYHOUSES – GANG MINI STORAGE UNITS – COVERED BUS STOP SHELTERS –

BATTING CAGES – HOT TUB COVERS - TACK ROOMS - HAY BARNS FOR LIVESTOCK - LOAFING SHELTERS FOR

LIVESTOCK, DOG RUNS & KENNELS AND A WHOLE HOST OF OTHER APPLICATIONS. OR IF YOU HAVE A SPECIAL

PROJECT YOU WANT TO BUILD CALL US WE HAVE CAD & DESIGN SERVICE AVAILABLE FOR A NOMINAL FEE. WE

WILL TURN YOU VISION OR DREAM BUILDING INTO REALITY. WE WILL DESIGN IT & SHOW YOU HOW YOU CAN USE

OUR REVOLUTIONARY DO IT YOURSELF“QUICK BUILD” FRAMES WITH “ FAST FIT” CONNECTORS TO BUILD YOUR

PROJECT FAST, EASY AND TO YOUR OWN SPECS. FOR COMPLETE INFORMATION ON OUR DO IT YOURSELF

BUILDING SYSTEM PLEASE

CALL RON At: 480 343 9571 OR EMAIL: [email protected]

ALL STEEL SHED FRAMES – BOX 30745, PHOENIX, AZ. 85046

WE CAN PROVIDE LARGER DIY BUILDINGS & FRAMES- DESIGN & ENGINEERING EXTRA - CALL FOR DETAILS.

ALL STEEL SHED FRAMES ARE MADE IN THE USA

diy all steel shed frames

Documents