magazine

Step 1• Decide how wide you want your scarf to be, and add 1-inch

to this measurement.• Cut your T-Shirts into pieces of this width. Length does not

matter.• Cut out a matching back piece for every front piece, and

stack your front panel pieces and back panel pieces in separate piles.

Step 2• Lay out your front panels in the order you would like them

to be appear in the scarf.• Take the top two pieces and put them together with the

front sides touching.• Pin the pieces together and sew them with a ½-inch seam

allowance.

Step 3• Take the pins out and open up the two pieces you just

sewed. • Repeat the process of lining up, pining, and sewing until all

front panel pieces are sewn together.• Repeat this step for the back panel pieces.

Step 4• Lay the front panel on the back panel with the right sides

together, and pin both of the long edges to each other.• Sew each long edge with a ½-inch seam allowance.

Step 5• Take the pins out and turn the scarf right-side out. • Lay the scarf flat with the seams at each side, and use a

few pins to hold the layers in place. • Line the edge of your sewing foot up with the edge of the

scarf and sew around all four edges of the scarf to secure.

Step 6• After the scarf is sewn in place, cute strips of fringe into

both ends to finish!Stay Warm,