diyobd2 (solved) tcscdp ds150 prompts unknown diagnostic id error message
TRANSCRIPT
![Page 1: Diyobd2 (solved) tcscdp ds150 prompts unknown diagnostic id error message](https://reader033.vdocuments.net/reader033/viewer/2022061521/55d29215bb61eb19358b4661/html5/thumbnails/1.jpg)
Numéro de l'article. SP211-Bhttp://www.diyobd2.fr/wholesale/tcscdp-pro-bluetooth-avec-4g-carte-memoire.html
(Solved) TCSCDP DS150 prompts Unknown diagnostic id error message
I bought a TCSCDP DS150 Bluetooth pro scan tool from DIYOBD2 in late November and received it last Thursday. The tool looks neat and works fine. But when I connected it to my 05 BMW X3 via Bluetooth, something seemed wrong. I got a message “Unknown diagnostic id. Generic protocol with standard information will be used”. I disassemble the CDP 150 and but had no idea where to start. Then I sent the seller an email and it provided me a solution that finally got the issue fixed.
According to the seller, there are some gadgets I should check. The first are the
![Page 2: Diyobd2 (solved) tcscdp ds150 prompts unknown diagnostic id error message](https://reader033.vdocuments.net/reader033/viewer/2022061521/55d29215bb61eb19358b4661/html5/thumbnails/2.jpg)
marked parts on the PCB showed in the following picture.
Second are the FTDI chips marked in below picture.
Third is the 513A 0523 IC (integrated circuit) which works as a bridge to connect TCSCDP DS150 Bluetooth and BMW vehicles.
![Page 3: Diyobd2 (solved) tcscdp ds150 prompts unknown diagnostic id error message](https://reader033.vdocuments.net/reader033/viewer/2022061521/55d29215bb61eb19358b4661/html5/thumbnails/3.jpg)
Finally, the diode GEX28A marked in red circle.
I checked all the parts and found out that the diode GEX28A was a little bit loose. I removed it and soldered it back. Then I tried the Bluetooth connection again. It would work! If your CDP DS150 has the same issue, like mine, a little soldering may fix it. If you do not know how to do the soldering, you had better get a professional.