dmts-4001 telemetry receiverthe dmts-4001 is a single or dual-channel multi-band integrated...

D M T S - 4 0 0 1T E L E M E T R Y R E C E I V E R

Telemetry & RF Products

L3 Telemetry & RF Products (L3 T&RF)

DMTS-4001 is designed as a single or

dual-channel multi-band integrated

telemetry receiver with tracking

capabilities and integrated bit and frame

synchronizers on a single PCI short

card.

Capable of accepting RF input signals

with high dynamic range; from 0 dBm

down to noise floor, the DMTS-4001 will receive the RF signal, condition it,

perform digital demodulation, synchronization and process most telemetry

formats.

Direct down-conversion architecture allows spurious-free reception and

simplifies RF architecture for high reliability and durability. The bandwidth is

user-programmable from 30 kHz to 45 MHz with data rates up to 30 Mbps for

each receiver.

The AFC tracking feature compensates for Doppler-shift effect and other

transmitter abnormalities by centering input spectrum on a programmed center

frequency.

The unit provides rapid synchronization and maintains lock at lower

signal-to-noise ratio.

By using digital architecture, DSP-based filters, Modulated Numerically-

Controlled Oscillators (MNCO) and DSP-based PLL (Phase-Locked Loops), the

DMTS-4001 requires no calibration or tuning.

User-friendly and man-machine interface (GUI) allows easy installation,

calibration, configuration and monitoring of the product.

The DMTS-4001 is a single or dual-channel multi-band integrated telemetry receiver with bit and frame synchronizer on a single PCI short card.

FEATURES

• Full dual-telemetry system on PCI short card

• Lower L, Upper L, S, and any satellite IF bands

• FM, PM, BPSK, QPSK, OQPSK, SOQPSK demodulators in standard package, others available under request

• 30 kHz to 45 MHz user programmable bandwidth per IRIG106-07

• Data rate from 30 kbps up to 30 Mbps per receiver

• Bit and frame synchronizers, Built-in instrumentation

• User-friendly Windows® XP, 7 (32 or 64 bit) GUI with a single auto setup button

• Unlimited setup configuration storage with overwrite protection warnings


AUTO-SET-UP OF ALL PARAMETERS BASED ON MODULATION TYPE AND DATA RATE

COMPREHENSIVE GUI

Multiple programmable options with frequency

or time domain monitoring.

Dual receiver combiner shows the combiner

gain.

Built-in instrumentation



SPECIFICATIONS

RF SECTION

Input frequency range 1429 to 1545 MHZ Lower-Band

Upper L-Band 1700 to 1850 MHz

S-Band 2185 to 2400 MHz

IF bandwidth 30 kHz to 45 MHz programmable

Frequency tuning 100 kHz steps resolution

Dynamic range noise floor to -10 dBm

Sensitivity @1 Mbps better than -90 dBm (QPSK)

Maximum safe input +20 dBm

Noise Figure 8 dB Typical, 10 dB, maximum

Spurious rejection 60 dB

DEMODULATOR

Demodulation modes PCM/FM / PM/BPSK / QPSK / OQPSK / SOQPSK

Data rates 30 kbps to 30 Mbps

AFC tracking ± 250 kHz

AGC controls Automatic, manual, AGC freeze and AGC zero, user-programmable from 0.1 ms to 1s

DIVERSITY COMBINING

Pre-D

Post-D

INSTRUMENTATION

Spectrum analyzer with Within programmed BW programmable span Any span within 1429 to 2400 MHz

Time domain analyzer Digital scope Eye diagram

Modulation domain Constellation analyzer

BIT SYNCHRONIZER

Bit rates 30 kbps to 30 Mbps

Process All PCM codes (NRZ, Bi-Ø)

Bit sync bandwidth 0.001%, to 5%

Differential decoder Per IRIG 106-07

Derandomizer 15 bit per IRIG 106-07

FRAME SYNCHRONIZER

Input data rate Up to 30 Mbps

Word length 16,32,48,64 bits

Minor frame length Up to 16,384 words, programmable per IRIG 106

Bit order MSB/LSB-first (word-by-word basis)

Frame sync pattern Up to 64 bits per IRIG106 class II

Sync error tolerance 0 to 15 bits

Sync slip window 1 or 3 bits wide

Input data rate Up to 30 Mbps

EXTERNAL CONNECTION

2 SMA-type connectors PCM/FM / PM/BPSK RF inputs QPSK / OQPSK / SOQPSK

Up to 6 analog outputs IF or baseband (I&Q) or tape recorder outputs

Up to 4 video outputs Two baseband video outputs per channel

AM & AGC outputs Dedicated AM and AGC output for each channel

2 SMB type connectors IF or baseband (I&Q) or tape recorder for analog outputs

29-pin to DB-25 connector Data and clock outputs per with software channel. Signal frame or bit programmable synchronizer outputs AGC and I/O AM outputs.

Note: Breakout cable to BNC-type connector is included on all Bitsync and Frame sync options.



OPTIONAL CONFIGURATIONS WITH ORDERING CODE (O/C)

DESCRIPTION ORDERING #

Single-Channel Card 4001-0-0-0

Single-Channel Card with bit sync and frame sync 4001-1-0-0

Single-Channel Card without bit sync or frame sync 4001-0-1-0 installed in a Portable System Computer

Single-Channel Card with bit sync and frame sync 4001-1-1-0 installed in a Portable System Computer

Single-Channel Card without bit sync or frame 4001-1-0-1 sync installed in a Multi-Purpose Expansion System

Single-Channel Card without bit sync or bit sync 4001-0-0-1 installed in a Multi-Purpose Expansion System

Dual-Channel Card with combiner and bit sync and frame sync 4002-1-0-0

Dual-Channel Card with combiner only 4002-0-0-0

Dual-Channel Card with combiner and bit sync and 4002-1-1-0 frame sync installed in a Portable System Computer

Dual-Channel Card with combiner and bit sync and 4002-1-0-1 frame sync installed in a Multi-Purpose Expansion System

This presentation consists of L3 Technologies, Inc. general capabilities information that does not contain controlled technical data as defined within the International Traffic in Arms (ITAR) Part 120.10 or Export Administration Regulations (EAR) Part 734.7-11 Data, including specifications, contained within this document are summary in nature and subject to change at any time without notice at L3’s discretion. Call for latest revision. All brand names and product names referenced are trademarks, registered trademarks, or trade names of their respective holders. BRML 662 Rev A

L3 Telemetry & RF Products9020 Balboa Avenue

San Diego, CA 92123

Tel: 858.694.7500800.351.8483

1515 Grundy’s LaneBristol, PA 19007

Tel: 267.545.7000

Email: [email protected]

L3T.com.com/TRF

Multiple Purpose Expansion System

(laptop not included)

Portable System Computer

Single or Dual-Channel Card


dmts-4001 telemetry receiverthe dmts-4001 is a single or dual-channel multi-band integrated...

Documents