Setting Up 2 DN-S3700 Players with Traktor Pro (PC/MAC)

DN-S3700 Preset Configuration.……………….....page 2 How to Setup Traktor for PC...…………………….page 3 ~ 9 How to Setup Traktor for MAC…………………….page 10 ~ 19 Function List for Traktor……………………………page 20

2

Preset Configuration for DN-S3700 Ensure that both Denon DN-S3700 controllers are powered on and connected via USB to your computer (PC/MAC)

On the 1st DN-S3700 (or Left Deck), initiate the preset mode by holding the “preset” button down for 2 seconds, then

turn the parameter knob to “MIDI CH SET”, push down on the parameter knob and select “1” (it should already be set

there by default) Push down on the parameter knob again for next step.

Turn the parameter knob “UNIT NO SET”, push down on the parameter knob and select “1”, then press the CUE button

to exit and save.

On the 2nd DN-S3700 (or Right Deck), initiate the preset mode by holding the “preset” button down for 2 seconds, then

turn the parameter knob to “MIDI CH SET”, push down on the parameter knob and select “2”.

Push down on the parameter knob again for next step

Turn the parameter knob “UNIT NO SET”, push down on the parameter knob and select “2”, then press the CUE button

to exit and save.

S3700

(Left Deck)

(Left Deck)

(Right Deck)

(Right Deck)

*You have now completed the Preset Configuration.

*Set each player to “MIDI Mode”

3

Two Player Configuration of Traktor Pro PC

for Denon DN-S3700

Introduction This document is meant as a quick step guide to configure the Denon DN-S3700 controller work together with Traktor Pro.

on a PC

1. Install the Denon DJ ASIO Driver from the included CD-ROM, or DL from here:

http://www.denondj.com/software/DDJAsioDrv2.zip

2. Download and Installation of Traktor Pro

You can download the Traktor Pro directly from the homepage of Native Instruments.

Click on the link below for Traktors installation files. (Win Demo)

http://www.native-instruments.com/index.php?id=traktor3pcdemo&L=1

PC

4

After downloading the software, unzip the setup file and double click it to install Traktor Pro.

Start Traktor Pro after the installation is completed.

Run the application in the Demo mode. In that mode Traktor Pro offers to you the same functional range as a registered

version. The one difference is that this application closes automatically after 30 minutes. So you need to restart it again.

3. Configuration of Traktor Pro

This chapter shows you how to configure your version of Traktor Pro for direct compatibility with the Denon DN-S3700

controller.

- Be sure that the DN-S3700 is still connected to your computer via a USB port.

(How to connect the device with other hardware like PC / Mixer can be found inside the DN-S3700 manual)

- Users of Windows XP/Vista should also ensure that the most recent version of the

DN-S3700 device driver is installed on their system.

- Save the attached DN-S3700.tsi file to your hard drive.

- Start Traktor Pro and select ‘Preferences’

PC

5

2.1 Preferences Inside preferences you can do all configurations to let the DN-S3700 controller work with Traktor Pro.

a) Expand the ‘Audio Setup” and choose ‘Soundcard’

b) If not already done choose the “Denon DJ ASIO Driver“

PC

6

c) Open the DN-S3700 control panel

d) Check if your standard settings set and close this panel by clicking ‘OK’.

PC

7

e) Choose ‘Output Routing’ and change the Mixer Mode to ‘external’. Set the correct outputs to Traktors ‘Out

Channels’.

f) Return to ‘preferences’ and expand the ‘Hotkey & MIDI Setup’ menu.

g) Select ‘USB Audio Device’ as the midi device. If not already activated, double click the ‘USB Audio Device’ entry to

activate it.

PC

8

h) Return to the preferences menu and select "MIDI Setup". Click on ‘Load’ to open a browser window and select the

DN-S3700.tsi you have stored on your hard drive.

PC

9

i) Once the file has been imported press ‘Apply’.

More info about settings and functions of the Traktor Pro may be found in the user manual.

You may also find helpful tips and hints about using the software in the NI user forum.

https://www.native-instruments.com/forum_us/forumdisplay.php?f=122

PC

10

Two Player Configuration of Traktor Pro MAC for Denon DN-S3700

Introduction This document is meant as a quick step guide to configure the Denon DN-S3700 controller work together with Traktor Pro.

on a MAC.

Download and Installation of Traktor Pro

You can download the Traktor Pro directly from the homepage of Native Instruments.

Click on the link below for Traktors installation files. (Mac Demo)

http://www.native-instruments.com/index.php?id=traktor3pcdemo&L=1

After download of the software unzip the setup file and double click it to install Traktor Pro.

MAC

11

4. Configuration of DN-S3700 with MAC Audio/MIDI Setup

- On the MAC, go to Applications > Utilities > Audio MIDI Setup

- At the top Menu bar select Audio > Open Aggregate Device Editor

MAC MAC

12

- Click on the “+” symbol to add a new aggregate device

- You will now see the option to select the 2 DN-S3700 units.

MAC

13

- Select both DN-S3700 units by putting check marks in the “Use” column, then press Done.

- You can now exit out of Audio MIDI Setup.

MAC

14

5. Configuration of Traktor Pro

Run the application in the Demo mode. In that mode Traktor Pro offers to you the same functional range as a registered

version. The one difference is that this application closes automatically after 30 minutes. So you need to restart it again.

- Save the attached DN-S3700.tsi file to your hard drive.

- Start Traktor Pro and select ‘Preferences’

4.1 Preferences

MAC

15

Inside preferences you can do all configurations to let the DN-S3700 controller work with Traktor Pro.

j) Expand the ‘Audio Setup” and choose ‘Soundcard’

k) In the Audio device drop down, select “Aggregate Device (0 In, 4 Out)

MAC

16

l) Choose ‘Output Routing’ and change the Mixer Mode to ‘external’. Set the correct outputs to Traktors ‘Out

Channels’.

m) Return to ‘preferences’ and expand the ‘Hotkey & MIDI Setup’ menu.

MAC

17

n) Select ‘DN-S3700’ as the midi devices. If not already activated, double click both the ‘DN-S3700” entry to activate it.

MAC

18

o) Return to the preferences menu and select "MIDI Setup". Click on ‘Load’ to open a browser window and select the

DN-S3700.tsi you have stored on your hard drive.

MAC

19

p) Once the file has been imported press ‘Apply’.

More info about settings and functions of the Traktor Pro may be found in the user manual.

You may also find helpful tips and hints about using the software in the NI user forum.

https://www.native-instruments.com/forum_us/forumdisplay.php?f=122

MAC