dock builders supply - products catalog (volume 10)

VOLU

ME

10Pr

oduc

ts C

atal

og

Welcome to Dock Builders Supply!For nearly two decades, Dock Builders Supply has provided high quality marine construction materials and accessories for residential and commercial projects. A shared appreciation of the rewards and challenges of waterfront living and the nautical lifestyle forms a common bond between us and our customers. Our products are designed and selected with painstaking attention to detail to ensure complete customer satisfaction with respect to functionality and attractiveness. Many of the innovative products in our catalog incorporate the best technology and construction methods available today. From simple swim platforms and recreational docks to complex commercial marina systems, we can supply you with the right materials for your project. Our staff consists of knowledgeable professionals with many years of marine construction experience that stand by ready to work with you when designing your project. Dock Builders Supply can provide you with detailed material estimates and drawings to better assist you with planning your project. While working with you, your project becomes our project! We share your enthusiasm during project planning and stand by to assist you during its implementation. Above all else, our goal is to become your reliable partner, ready to provide advice necessary to ensure successful completion of your project.

If, after perusing our catalog, you are unable to locate a product that you need, please contact our resourceful staff, and we can assist in your search. We are constantly expanding our product lines and value your feedback and suggestions. Please visit our website periodically to view our newest products until our next catalog debuts.

Once again, we appreciate your business and welcome you to our new products catalog!

Introduction

800.677.4710www.dockbuilders.com

2

Table of

Introduction ..................................... 2

Floating Dock Photos .................... 4

Floating Dock Plans ........................ 5

Dock Floats .................................. 6-10

Styrofoam™ Billets ......................... 11

Lift Tanks ........................................... 12

Wave Attenuator ............................ 13

Dock Hardware ........................ 14-21

Aluminum Gangways ................. 22

Boarding Steps & Cart ............... 23

Ladders ...................................... 24-25

Piling Caps ..................................... 26

Piling Wrap .................................... 27

Dock Bumpers & Fenders .... 28-31

Mooring Products ................. 32-36

Cleats ................................................ 37

PWC Docking ................................. 38

De-Icer ............................................. 39

Power Pedestals .................... 40-43

Lighting ..................................... 44-51

Marker Buoys .......................... 52-53

Fish Attraction Lights ................. 54

Fish Cleaning Tables .................... 55

Dock Sides ............................... 56-59

Nautical Accessories ............. 60-64

Dock Utilities ................................. 65

Dock Boxes .............................. 66-70

Decking (ThruFlow™) ................... 71

Wood Sealant .......................... 72-73

Seawall Products .......................... 74

Galvanized Fasteners .................. 75

Stainless Steel Fasteners ...... 76-77

Tools ........................................... 78-79

Terms & Conditions .............. 80-81

Index .......................................... 82-83

Table Of Contents

3

Floating Dock Photos

Floating Dock Photos


4

Assorted Standard Sized Floating Docks and Swim Platforms

DockBuilders’ Floating Dock Plans can help you get up to speed quickly in building your dock. Our knowledgeable design team is ready to assist you with your custom dock design, or we can incorporate one of our many pre-configured popular designs into your floating dock project.Either way, we will help you make the floating dock you envision a reality!

Call us today to get started on your custom dream dock!

1.800.677.4710

Floating Dock Plans

6’ x 10’8’ x 10’

10’ x 10’

6’ x 12’8’ x 12’

10’ x 12’12’ x 12’

6’ x 14’8’ x 14’

10’ x 14’12’ x 14’14’ x 14’

6’ x 16’8’ x 16’

10’ x 16’12’ x 16’14’ x 16’16’ x 16’

6’ x 18’8’ x 18’

10’ x 18’12’ x 18’14’ x 18’16’ x 18’18’ x 18’

6’ x 20’8’ x 20’

10’ x 20’12’ x 20’14’ x 20’16’ x 20’18’ x 20’20’ x 20’*Custom specialty utility/work platform and U-Dock designs also available

‘ ‘

‘ ‘

Floating Dock Plans

5

DockBuilders’ Dock Floats are a one-piece rotationally molded part, which eliminates seams that could result in separation and leakage. The 0.150” nominal thick shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors. This tough shell helps prevent damage from the sun, salt water, fresh water, debris, oil, gas, and marine organisms.

Each float is foam filled with expanded polystyrene, which contains no CFCs or HCFCs. DockBuilders’ dock floats have a flat top with molded-in mounting slots for easy attachment to any dock framework; whether wood, steel, or aluminum. Floating docks built with DockBuilders’ dock floats will provide long lasting encapsulated flotation, resulting in long-term savings for recreational docks as well as complex marinas.

Dock Floats

Features:•Commercial or Residential Applications

•Rugged, Seamless, Rotationally Molded Encasement

•Expanded Polystyrene (EPS) Foam Filled

•Fifteen (15) Year Warranty

•Molded Mounting Slots & Pilot Holes

•Maintenance Free

•Nominal Wall Thickness of 0.150”

•Resists Salt Water, Oil, Gas, and Marine Life

• Installs Quickly to Wood, Steel, or Aluminum Frames

•US Army Corps of Engineers Approved

•Tank Tested Buoyancy Ratings +0/-5%

LB-3804SSW-38SSF

LB-3804W-38GF

Item

# (Stainless Steel) 3/8” x 4” Lag Bolts(Stainless Steel) 3/8” x 1½” Fender Washer

(HDG) 3/8” x 4” Lag Bolts(HDG) 3/8” x 1½” Fender Washer

Des

crip

tion

Dock Float FastenersRecommended hardware for fastening floats to wood framing:

Stainless steel hardware is recommended for salt water environments.

All dimensions, weights, and buoyancies are approximate

48”

24”

12”

8”

DF-C-12048-12DF-C-12048-20

1727

203345

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)12”20”

Dep

th48”

12”

12” x 48” Floats

Dock Floats


6

DockBuilders’ Dock Floats are a one-piece rotationally molded part, which eliminates seams that could result in separation and leakage. The 0.150” nominal thick shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors. This tough shell helps prevent damage from the sun, salt water, fresh water, debris, oil, gas, and marine organisms.

Each float is foam filled with expanded polystyrene, which contains no CFCs or HCFCs. DockBuilders’ dock floats have a flat top with molded-in mounting slots for easy attachment to any dock framework; whether wood, steel, or aluminum. Floating docks built with DockBuilders’ dock floats will provide long lasting encapsulated flotation, resulting in long-term savings for recreational docks as well as complex marinas.

48”

24”

24”

20”

DF-C-24048-08DF-C-24048-12DF-C-24048-16DF-C-24048-18DF-C-24048-20DF-C-24048-24

253137384346

287434598642719867

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)8”12”16”18”20”24”

Dep

th48”

24”

24” x 48” FloatsAll dimensions, weights, and buoyancies are approximate




72”

24”

20”

16”96

”

24”

20”

16”

12”

36”

18”

24”

20”

DF-C-20072-08DF-C-20072-10

3235

376450

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)8”10”

Dep

th

DF-C-24036-12DF-C-24036-16DF-C-24036-20

242832

327442524

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)12”16”20”

Dep

th

DF-C-20096-10 40 595

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)10”

Dep

th

72”

20”

96”

20”

36”24”

20” x 72” Floats 20” x 96” Floats


Dock Floats

7

96”

24”

36”

32”

DF-C-36096-12DF-C-36096-16DF-C-36096-20DF-C-36096-24

8194114127

1414182222982687

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)12”16”20”24”

Dep

th

96”

36”

36” x 96” FloatsAll dimensions, weights, and buoyancies are approximate




48”

24”

36”

32”

72”

24”

36”

32”

72”

24”

42”

*See website for 32” depth designDF-C-36072-12DF-C-36072-16DF-C-36072-20DF-C-36072-24DF-C-36072-32*

65728496107

10591359172720902575

DF-C-42072-16 84 1627

DF-C-36048-08DF-C-36048-12DF-C-36048-16DF-C-36048-20DF-C-36048-24

3544515967

47169190511141346

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

8”12”16”20”24”

Dep

th 12”16”20”24”32”

Dep

th

16”

Dep

th

72”

36”

72”

42”

48”36”



Dock Floats


8





48”

24”

48”

24”

60”

30”

48”

24”

72”

24”

48”

24”

96”

24”

48”

24”

*See website for 32” depth design *See website for 32” depth design

DF-C-48048-12DF-C-48048-16DF-C-48048-20DF-C-48048-24

53677788

937122015201799

DF-C-48072-12DF-C-48072-16DF-C-48072-20DF-C-48072-24DF-C-48072-32*

8396112126166

14061863228027023560

DF-C-48096-12DF-C-48096-16DF-C-48096-20DF-C-48096-24DF-C-48096-32*

110130144164227

18342475307636184804

DF-C-48060-12DF-C-48060-16DF-C-48060-20DF-C-48060-24

63808798

1190155219002300

12”16”20”24”

12”16”20”24”

12”16”20”24”32”

12”16”20”24”32”

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

Dep

th

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

Dep

th

Dep

th

Dep

th

72”48”

96”

48”

48”48” 60”48”



Dock Floats

9

Dock Floats - PolyFlange

•One Piece, Seamless Construction

•“Easymount” Flange System

•0.250” to 0.375” Thick Flat Top Surface

•Uniform 0.150” Nominal Wall Thickness

•Blow-Molded High Density Polyethylene

•10-Year Warranty

•Resistant to Oil and Diesel Fuel

•Great in Cold Weather Environments as Low as -20°F

•Resistant to Marine and Animal Life

•Filled with Expanded Polystyrene (EPS) Foam

•Made from Recycled Materials

•Meets or Exceeds all Army Corps of Engineers & EPA Requirements

•Passes the Hunt Absorption Test

DF-PF-48048-12DF-PF-48048-16DF-PF-48048-18DF-PF-48048-20

47516063

958127814381597

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)12”16”18”20”

Dep

th

48”36”

48”48”

48”

24”


36” x 48” Floats 48” x 48” Floats24

”

48”

48”

24”

36”

48”

24”

48”

DF-PF-36048-12DF-PF-36048-16DF-PF-36048-18DF-PF-36048-20DF-PF-36048-22DF-PF-36048-24

364351576064

56877287397310771178

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)12”16”18”20”22”24”

Dep

th

DF-PF-24048-08DF-PF-24048-12DF-PF-24048-16DF-PF-24048-18DF-PF-24048-20DF-PF-24048-22

232532394548

265359487549612676

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)8”12”16”18”20”22”

Dep

th

Polyflange™ Dock Floats are blow molded from high-density polyethylene and filled with heat-expanded polystyrene foam beads. Features include:




Dock Floats - Polyflange


10

Dock Floats - Billets

20”

96”

DOW StyrofoamTM Billets

**Due to shipping restrictions, billets must be ordered in quantities of 6 or more**

STYROFOAM™ brand buoyancy billets are another smart choice for floating structures. Buoyancy billets may be cut to fit or retrofit into floating dock compartments. They can also be recessed inside the floating dock frame (directly underneath the decking boards) to provide an extremely low freeboard without sacrificing buoyancy, making it a popular choice for kayak/canoe and competitive rowing enthusiasts.

Extremely Buoyant: The closed-cell structure of STYROFOAM™ is comprised of millions of tiny air bubbles providing exceptionally strong and redundant buoyancy. These non-interconnected air cells serve as independent buoyancy chambers so the Styrofoam™ billets will not lose their buoyancy even if punctured.

Rugged: STYROFOAM™ brand buoyancy billets cannot become waterlogged, do not corrode or breakdown into small particles, and provide years of service under normal conditions. They resist the attack of destructive marine growths and are unaffected by salt or fresh water. Their light weight also makes the DOW Styrofoam™ buoyancy billets easier to handle and install, keeping installation costs low!

Styrofoam™ is a Trademark of The Dow Chemical Company.

Note: Consult with applicable permitting agencies to make certain this product conforms to codes and permitting requirements before ordering.

Sample floating dock sketch using Styrofoam™ Billets.

Styrofoam™ Billets

Billet-102096 20 61010”

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

Dep

th


Dock Floats - Billets

11

lift tANKS

32”

24”

DF-C-LT-3216824-.30DF-C-LT-3216824-.37

225270

4,1274,050

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)24”24”

Dep

th

168”

32”

96”

34.5”

32” x 168” Lift Tanks 34.5” x 96” Lift Tanks

0.300”0.375”

Wal

l Thi

ckne

ss DF-C-LT-3409630-.30DF-C-LT-3409636-.30

DF-C-LT-3409630-.37DF-C-LT-3409636-.37

157181

196226

2,6503,220

2,6113,175

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)30”36”

30”36”

Dep

th0.300”0.300”

0.375”0.375”W

all T

hick

ness

168”

34.5

”

20”

96”

Lift Tanks are Designed to Temporarily Lift floating dock sections to allow for repair and replacement of floats as well as for other temporary lift applications. Lift tanks are hollow, one-piece rotationally molded tanks that can be filled with water to submerge, then refloated by evacuating the water and replacing it with air. The shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors, which is available in our standard 0.300” nominal thickness or heavy wall 0.375” nominal thickness. This tough shell helps prevent damage from the sun, salt water, fresh water, debris, oil, gas, and marine organisms.

Features:•Molded-In Mounting Holes Around the Top Perimeter•1” NPT Threaded Insert for Commercial Fitting•3” Diameter Molded-In Hole Outlets in Bottom for Water Intake and Exhaust.

(We typically ship these uncut and sealed unless otherwise specified, as many of our customers do not want to utilize all outlets for every application.)

•Strong 0.300” or Heavy 0.375” (Nominal) Wall Thickness for Structural Strength



Lift Tanks


12

Lift Tanks are Designed to Temporarily Lift floating dock sections to allow for repair and replacement of floats as well as for other temporary lift applications. Lift tanks are hollow, one-piece rotationally molded tanks that can be filled with water to submerge, then refloated by evacuating the water and replacing it with air. The shell is made of extra strong virgin polyethylene containing ultraviolet inhibitors, which is available in our standard 0.300” nominal thickness or heavy wall 0.375” nominal thickness. This tough shell helps prevent damage from the sun, salt water, fresh water, debris, oil, gas, and marine organisms.

Wave attenuator

The Floating Wave Attenuator system provides an affordable way of dissipating wave action around most mooring areas. This two-part system is comprised of a durable double-flanged top float filled with EPS foam and a hollow bottom shell that fills with water, acting as ballast and helping to attenuate the waves. A wood or metal framework can be secured to the top floats to create a wave attenuation barrier to mitigate wave action. Also, some marinas incorporate wave attenuators into their floating dock design for increased utility, or to simply increase the stability the lower shell’s water ballast affords their floating docks.

48”

36”

DF-C-WA-36048-20-DFM 50 NA

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

48”36”

Wave Attenuator Hollow Bottom Shell Wave Attenuator Top Float (Foam Filled)

DF-C-WA-36048-20-DFF 65 1088

Item

#

Wei

ght (

lbs)

Buoy

ancy

(lbs

)

48”36”

0.200” Wall Thickness 0.200” Wall Thickness

12”

48”

36”

12”



Wave Attenuator

13

Dock Hardware

DockBuilders’ Floating Dock Hardware is designed to help maintain the structural integrity of wood framed floating docks that are subjected to the torquing motion of wind and waves. Unlike upland decks or fixed docks which can be fastened with screws and nails, a floating dock’s frame is subject to torsional stresses that require it to be bolted together. Our framing brackets, hinges, and fasteners provide significant strength and rigidity to the dock frame, thereby adding longer life and increasing the utility of the floating dock. A strong frame will provide a stable platform onto which dock floats and decking materials may be fastened. In addition, a variety of piling hoops, piling guides, and pipe holders provide the means to secure your floating dock.

Features:•¼” Thick Steel Construction•Hot-Dipped Galvanized for Maximum Corrosion Resistance•Assorted Male / Female Hinges for Connecting Dock Sections•Specialty Hinges for Gangway Ramps•Built-in Roller Assemblies on Select Brackets and Piling Hoops/Guides•Pipe Holders and Piling Hoops Ranging from 3” to 18”

Typical Corner Connection

Typical Framing Connection

Inside CornerItem# IC

Angle BracketItem# Angle-2.5x5

Outside Corner EndItem# OC-E

Outside Corner MaleItem# OC-M

Outside Corner FemaleItem# OC-F Connector Pin Set

Item# ConPinS

T-Connector FemaleItem# T-ConF

T-Connector MaleItem# T-ConM

Chain RetainerItem# ChainRet

Pipe Holder 4”Item# PH-4O

Pipe Holder 3”Item# PH-3O

Washer PlateItem# W-1.5x5

Dock Hardware


14

Dock Hardware - Corners

DockBuilders’ Floating Dock Hardware is designed to help maintain the structural integrity of wood framed floating docks that are subjected to the torquing motion of wind and waves. Unlike upland decks or fixed docks which can be fastened with screws and nails, a floating dock’s frame is subject to torsional stresses that require it to be bolted together. Our framing brackets, hinges, and fasteners provide significant strength and rigidity to the dock frame, thereby adding longer life and increasing the utility of the floating dock. A strong frame will provide a stable platform onto which dock floats and decking materials may be fastened. In addition, a variety of piling hoops, piling guides, and pipe holders provide the means to secure your floating dock.

Features:•¼” Thick Steel Construction•Hot-Dipped Galvanized for Maximum Corrosion Resistance•Assorted Male / Female Hinges for Connecting Dock Sections•Specialty Hinges for Gangway Ramps•Built-in Roller Assemblies on Select Brackets and Piling Hoops/Guides•Pipe Holders and Piling Hoops Ranging from 3” to 18”

31/8” I.D.

8½”

3½”

3½”

Item# IC

This heavy duty inside corner should be used with an outside corner. Elongated mounting holes fit up to single or double 1½” framing.Install using ½” carriage bolts.

8¾”8¾”

5”

Item# PH-3IC

Inside Corner with 3” x 12” pipe. Accommodates 2” steel pipe to hold dock in place. Install using ½” carriage bolts.

8½”

5”

(Connector Pin Set) Item# ConPinS

Use these connector sets for joining male and female hardware tabs.

5½”

3”

Item# OC-M

Has one ¾” welded tab (male) for a ¾” pin. Connect to a female tab set.3½” on-center hole pattern.Install using ½” carriage bolts.

10¼”10¼”

5”

Item# OC-F

Has two ½” welded tabs (female) for a ¾” pin. Connect to a male tab.3½” on-center hole pattern.Install using ½” carriage bolts.

10¼”10¼”

5”

Item# OC-MF

Has one ¾” welded tab (male) and two ½” welded tabs (female). Connect to (1) female tab set and (1) male tab.Install using ½” carriage bolts.

10¼”10¼”

5”

Item# OC-MM

Both legs each have one ¾” welded tab (male). Connect to (2) female tab sets.3½” on-center hole pattern.Install using ½” carriage bolts.

10¼”10¼”

5”

Item# OC-FF

Both legs have two ½” welded tabs (female). Connect to (2) male tabs.3½” on-center hole pattern.Install using ½” carriage bolts.

10¼”10¼”

5”

Item# OC-E

Use this corner at ends of fingers and docks. 3½” on-center hole pattern.Install using ½” carriage bolts.

10¼”10¼”

5”

¼” Thick HDG ¼” Thick HDG



¼” Thick HDG

¼” Thick HDG

(¾” x 3½” Bolt Set) Item# HB-34035S

Inside Corner Inside Corner Pipe Holder

Outside Corner Male Outside Corner Female

Connector Sets

Outside Corner Male-Male Outside Corner Female-FemaleOutside Corner Male-Female

Outside Corner End

Dock Hardware - Corners

15

Dock Hardware - Misc.

Item# Angle-2.5x5-adj

Use this heavy duty angle where hole pattern conflict prohibits using a standard angle.3½” on-center hole pattern.Install using ½” carriage bolts.

5”

2½” 2½”

Use two washer plates with each angle.3½” on-center hole pattern.Install using ½” carriage bolts.

Item# AngleClipS

Use this heavy duty angle for connections where a standard angle bracket won’t work.Install using ½” carriage bolts.

Item# AngleClipR

Use this heavy duty angle for connections where a standard angle bracket won’t work.Install using ½” hex bolts.

Item# BP-5x5

5” x 5” reinforcing plates are used to back up T-Connectors, Chain Retainers, or Finger Deck Stabilizers. 3½” on-center hole pattern.Install using ½” carriage bolts.

Item# Angle-2.5x5

Use this heavy duty angle at the ends of stringers and internal blocking connections.3½” on-center hole pattern.Install using ½” carriage bolts.

Item# W-1.5x5

1½”

5”

2½”

5”

5”

5”

2½”

2½” 2½”

2½”

2½” 2½”

2½”

Item# T-ConM

Has one ¾” welded tab (male). Connect to female tab set using ¾” bolt or connector pin.3½” on-center hole pattern.Install using ½” carriage bolts.

Item# T-ConF

Has two ½” welded tabs (female). Connect to male tab using ¾” bolt or connector pin.3½” on-center hole pattern.Install using ½” carriage bolts.

Item# SP-5X25

5” x 25” splice plate used to join dock sections or timber together. Each plate can be mated with two inside corners and two washer plates.Install using ½” carriage bolts.

5”

5”

5”

25”

5”

5”

3” 3”

½” ¾”

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

Angle Bracket (adjustable) Washer Plate

Angle Clip S Angle Clip R

Angle Bracket

Back Up PlateT-Connector Female

Splice Plate

T-Connector Male

Dock Hardware - Misc.


16

Dock Hardware - Gangway

Carriage Bolt Set includes:(1) ½" x 3" Carr. Bolt HDG(1) ½" Flat Washer HDG(1) ½" Hex Nut HDG

Carriage Bolt Set includes:(1) ½" x 4½" Carr. Bolt HDG(1) ½" Flat Washer HDG(1) ½" Hex Nut HDG

Hex Bolt Set includes:(1) 5/8" x 3" Carr. Bolt HDG(1) 5/8” Flat Washer HDG(1) 5/8” Hex Nut HDG

These lag bolts are available in HDG or stainless steel.May be used to mount gangway hinges to wood.

Item# Axle-3G / Axle-4G

Heavy Duty ¾” x 33½” or ¾” x 45½” axle for ramp assembly.Use with 2”x5” wheel.

Item# Wheel-5x2

Heavy Duty 5”x2” black phenolic wheels are used for ramps.Use with ¾” diameter axle.

Item# HB-5803SMay be used with gangway ramp rollers.

Item# RR-Pair

These heavy duty inside corners with roller assemblies are installed at the bottom of the ramp. Pair includes left and right bracket.Install using (16) 5/8” hex bolts per pair.

(Stainless Steel) Item# LB-3803SS

10”

5”

5” 4” 4”

10¼”

45½”

2” 5”

10”

33½”

Item# CB-1203SUse with single 2” x 8” or 2” x 10” material.

Item# CB-12045SUse with double 2” x 8” or 2” x 10” material.

4” 9”

7”

10¼”

10¼”

5”

Designed for up to 3’ x 8’ Gangways


¼” Thick HDG

(HDG Steel) Item# LB-3803Item# Hinge-GS

Made for use with 2” x 6” stringers and 5/4” decking, 3/4” bolt set for hinge action is included.Install using 3/8” bolts or lags.

Item# OC-SBM

Designed to attach wooden gangways to the seawall cap. Connect to a standard female tab set using ¾” bolt set or connector pin. Install using ½” bolts.

Lag Bolt 3/8” x 3”

Gangway Axles Phenolic Wheel

Seawall Bracket Male

Hex Bolt Set 5/8” x 3”

Ramp Roller Pair

Gangway Hinge Setup

3” Carriage Bolt Set 4½” Carriage Bolt Set

Dock Hardware - Gangway

17

(4” x 18”) Item# HS-0418

Use these hurricane straps (2” x 18” or 4” x 18”) as needed to help prevent uplift.Install using ¾” hex bolts.

(2” x 18”) Item# HS-0218

Item# PB-S

For use with 1½” O.D. galvanized pipe to help hold dock in place. Connection from seawall or fixed dock to floating dock. Install using 3/8” bolts or lags.

Item# PB-RH


Item# FDS-135

This bracket is designed to help stabilize narrow finger piers.Install using ½” carriage bolts.

Item# PH-AKFor use with PH-3O and PH-4O.

Item# PB-LH


Item# PH-3O

Bolts to outside of dock. Use 2” steel pipe to hold dock in place. 3” pipe is 7” long. Install using ½” carriage bolts.

5”

Item# PH-4O

Bolts to outside of dock. Use 3” steel pipe to hold dock in place. 4” pipe is 5” long. Install using ½” carriage bolts.

9”

5”

8½”

5”

4” 4”

6”

7”

5”

4”

4” 4”

4”

4” 4”

4”

Dock Hardware - Securing

31/8” I.D.

41/8” I.D.

Attachment Kit includes:(2) 1½” x 5” Washer Plates(4) ½" x 4½" Carr. Bolts HDG(4) ½" Flat Washers HDG(4) ½" Hex Nuts HDG

Finger Deck Stabilizers

45°

3”

1½”

3¼”

1½”

2”

1½”

31/8” I.D.

8½”

3½”

3½”

Item# PH-3IC

Inside Corner with 3” x 12” pipe. Accommodates 2” steel pipe to hold dock in place. Install using ½” carriage bolts.

8½”

5”

¼” Thick HDG

Inside Corner Pipe Holder

105˚

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

3/16” Thick HDG2”

4” 18”

Hurricane Straps

Pipe Bracket Straight Pipe Bracket Right

Finger Deck StabilizerPipe Holder Attachment Kit

Pipe Bracket Left

Pipe Holder 4”Pipe Holder 3”



18

Item# ChainRet

Bolts to side of dock. Use chains with weights to hold dock in place. Use with 1/4”, 3/8” or 1/2” chain. Install using ½” carriage bolts.

5”

5”


2”

Item# Hoop-Chain

Adjustable chain hoop pile holder with 3/8” galvanized chain and shackles.For use with up to 13” diameter pole.Install using ½” carriage bolts.

20”

15”

Item# Hoop-08

Our pile hoop holder is constructed with a 1.9” OD pipe that is welded to a 5” plate. Install using ½” carriage bolts.

16½”

8”

Item# Hoop-10


Item# Hoop-12


Item# Hoop-14


Item# Hoop-S10

Use this light duty hoop strap for securing the dock to pilings in calm water settings with minimal water fluctuation. Install using 5/8” hex bolts.

10”

Item# Hoop-S12


Item# Hoop-S14


22½”

14”

20½”

12”

18½”

10”

12” 14”

5” 5” 5”

5”

4”

4”

3”

3”

3”

3”

3”

3”

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

Chain Retainer Hoop Chain Hoop Pile Holder 8”

Hoop Pile Holder 12” Hoop Pile Holder 14”Hoop Pile Holder 10”

Hoop Strap 12” Hoop Strap 14”Hoop Strap 10”


19


Our internal pile guides are made from3” x 3” x ¼” HDG steel angle. 6” long solid rubber rollers.Install using ½” carriage bolts (fits 13” x 13” cut-out).

18”18”

Item# IPG-12


21”21”

Item# IPG-15


24”24”

Item# IPG-18


27”27”

Item# Hoop-RA10

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.6” long solid rubber roller.Install using ½” carriage bolts.

Item# Hoop-RA12


Item# Hoop-RA14


Item# Hoop-RA16


Item# Hoop-RA18


26½”

18”

Item# IPG-09

24½”

16”

20½”

12”

18½”

10”

22½”

14”

18”

9”

12” 15”

6”

4”

6”

4”

6”

4”

6”

4”

6”

4”

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

Internal Pile Guide 9”

Internal Pile Guide 12” Internal Pile Guide 15” Internal Pile Guide 18”

12” Hoop Assembly W/ Roller 14” Hoop Assembly W/ Roller

18” Hoop Assembly W/ Roller16” Hoop Assembly W/ Roller

10” Hoop Assembly W/ Roller



20

Replacement Parts

(Deck Plate) Item# Hoop-DP10

Deck plate is made from 4” x 6” x ¼” HDG steel. The detachable HDG hoop is 1.9” OD pipe.









Item# RA

Heavy duty roller assemblycan be added to aid up-and-downmotion of the dock in areas with tidal action. (Includes: bracket, roller, SS axle, and cotter pins)Install using ½” hex or carriage bolts.

11”

6” Rubber Roller

2½”

(Axle) Item# Axle-5808SS

5/8” x 8” stainless steel axle pin and 5/32” x 1¼” cotter pins SS 18-8 for roller assembly.

(Open Hoop) Item# Hoop-HO10 (Open Hoop) Item# Hoop-HO12 (Open Hoop) Item# Hoop-HO14

(Open Hoop) Item# Hoop-HO16 (Open Hoop) Item# Hoop-HO18

Item# R-Y6243SP

6” long solid rubber replacement roller for roller assembly.Designed for 5/8” stainless steel axle.

Item# R-611B

HDG bracket for roller assembly.Designed for 5/8” stainless steel axle.Install using ½” hex or carriage bolts. (Cotter Pin) Item# CotterPinS

2½”

11”

6”

2½” O.D.

8”

5/8”

41/3”26½”

18”

24½”

16”

20½”

12”

18½”

10”

22½”

14”

6”

4”

6”

4”

6”

4”

6”

4”

6”

4”

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

¼” Thick HDG

Pile Hoop 12” Parts Pile Hoop 14” Parts

Pile Hoop 18” PartsPile Hoop 16” Parts

Pile Hoop 10” Parts

Roller Assembly

Roller Axle & Cotter PinsReplacement RollerRoller Bracket

Replacement Parts

21

Our Aluminum Gangways are constructed with marine-grade aluminum and built to last in harsh saltwater environments. They feature frame welded, truss-style handrails for increased strength and non-slip knurled aluminum decking panels for safety.

The minimum suggested length is 3-5 times the typical drop (including water fluctuation) expected at the dock.

Aluminum Gangways

Standard Features:• Gangway Frame & Support

Materials made from 6061 Marine-Grade Aluminum.

• Continuous Heavy Duty Horizontal Hinge Assembly at the Top.

• Ultra High Molecular Weight (UHMW) Wheels at the Bottom.

• Standard 42” High Welded Truss Style Handrails.

Contact us for special requirements or custom designs.

Optional Features:• ThruFlow Decking Panels• Vertical Picket Guard Rails• Transition Apron Plate• ADA-Compliant Grab-Rails and

Side Toe Plates• Frame Welded Lifting Tabs to

Move Gangway• Deck Walking Strips for Steep

Inclines/Declines• Special Load-Rating Fabrication• Customizable Widths and

Lengths

GW-03-08GW-03-10GW-03-12GW-03-14GW-03-16GW-03-18GW-03-20GW-03-22GW-03-24GW-03-26GW-03-28GW-03-30GW-03-32

Item

# 8’10’12’14’16’18’20’22’24’26’28’30’32’

GW-04-08GW-04-10GW-04-12GW-04-14GW-04-16GW-04-18GW-04-20GW-04-22GW-04-24GW-04-26GW-04-28GW-04-30GW-04-32

Item

#

3’ Wide 4’ Wide Length

Gangway - Hinged at Top, Rollers at Bottom- Heavy Duty Hinge at Top of Ramp (Double-End Hinged Ramps Available.)

- Standard 42” High Handrails (optional 36” high handrails available)

- Welded Handrails, Posts, & Diagonal Bracing for Strength.

- Heavy Duty UHMW Wheels are used for their high load capacity and are especially suited for wet or corrosive environments.

- Wheels allow for ramp movement due to water level fluctuation.

- Optional Transition Apron Plate for wheelchair or hand-truck access with micro wheels.

(3’ Wide) Item# GW-TP-03(4’ Wide) Item# GW-TP-04

Aluminum Gangways


22

Skid-Resistant Aluminum Surface

Boarding Steps & Dock Cart

Boarding Steps

DS-BW-100SDS-BW-200SDS-BW-300SDS-BW-400SDS-BW-500S

Item

# DS-BW-100SDDS-BW-200SDDS-BW-300SDDS-BW-400SDDS-BW-500SD

Item

#

“SD” Models come with a locking door and a sealed floor

DockBuilders’ Fiberglass Dock Steps make boarding your boat safer and easier. They feature a rugged, high-quality, fiberglass construction with a UV protected gel coat exterior for long life in the sun. For added safety, die cut traction pads are installed on the surface of every step. The base of each unit is equipped with a fastening flange for easy mounting and stable boarding.

If you require extra storage space, we also offer our “SD” models, which features a locking door and sealed floor.

12345

Step

s

Locking DoorModel:

StandardModel:

Optional aluminum handrails are available - call for details.

Straight LadderThe Dock Pro Dock Cart is the easiest way to carry all of your gear from your garage or car to your boat.

The curved handle design reduces bending-over, making the Dock Pro dock cart easier to handle than conventional carts, while the unique angled tub feature provides better leg clearance for maneuvering.

Features a spacious 7 cu. ft. heavy wall roto-molded poly-tub that will not rust or rot. Zinc-coated, corrosion-resistant hardware is used throughout. Plastic rim wheels with roller bearings and solid tires will stand up to the harshest marine environment.

Dock ProTM Dock Cart

Item

# DC-1060ST

Des

crip

tion Dock Pro Dock Cart with Solid Tires

Boarding Steps & Dock Cart

23

Ladders

Straight Ladder Swing Ladder

DockBuilders’ Dock Ladders are made from 6063 T5 marine-grade aluminum and are suitable for fresh and salt water environments. Extruded, grooved, and welded ladder rungs provide a firm grip and easy climbing access, making them the perfect choice for seawalls, fixed docks, and floating docks.

All ladders are now available with standard 2” deep steps or 4” deep steps for added comfort:

Mounting Hardware

Straight Ladder Swing LadderThe Straight Swing Ladder is a classic innovation that allows you to swing the ladder completely above the dock when not in use. A locking pin mechanism locks ladder in either up or down positions.

Recommended for fresh or saltwater environments.

The Straight Ladder, perfect for seawalls and fixed docks, makes climbing in and out of the water a breeze. The variety of standard lengths will accommodate most installations.

Recommended for fresh water environments and areas of minimal marine growth.

Model Shown: L-S3W

Note: All ladders should be cleared of freezing water to prevent damage to the ladder and dock.

Most ladder installations require the use of [4] hex bolts, [8] flat washers, [4] lock washers, and [4] hex nuts. For docks with double outside stringers, you will likely need [2] lag bolts, [2] hex bolts, [6] flat washers, [2] lock washers, and [2] hex nuts.

Stainless steel fastening hardware is recommended.

Quick Disconnect Brackets allow you to quickly disconnect and store your ladder. Ideal for seasonal usage! Works with all ladders except finger-pier and swing style. Constructed from 6063 T-5 marine-grade aluminum.

2” Steps

4” Steps

L-S3L-S4L-S5L-S6L-S7

34567It

em #

2”s

teps

Step

sL-S3WL-S4WL-S5WL-S6WL-S7W

W-12SSL HN-12SS

L-QD*

Item

# 4

”ste

ps L-SW3L-SW4L-SW5L-SW6L-SW7It

em #

2”s

teps L-SW3W

L-SW4WL-SW5WL-SW6WL-SW7WIt

em #

4”s

teps

Model Shown: L-SW3W

*Dimensions are approximate.*Dimensions are approximate.

*Design may vary.

34567

Step

s3’4’5’6’7’

Max

. Rea

ch 3’4’5’6’7’

Max

. Rea

ch

W-12SS

TB-1204SS

LB-1204SS

13”

20”

13”

20”

Ladders


24

Ladders

Lift Ladder Floating Dock Lift Ladder

Finger Pier Lift Ladder Floating Dock Finger Pier Lift Ladder

Note: All ladders should be cleared of freezing water to prevent damage to the ladder and dock.

13”

20”

The Finger Pier Lift Ladder is an innovative, retractable ladder that only takes up 8” on the dock. This design makes it ideal for use on narrower fixed docks and walkways. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide long-lasting service.

Recommended for narrow walkways on fixed docks in salt water environments where mean high water is greater than 27” below deck.

The Floating Dock Finger Pier Lift Ladder is an innovative, SHORT base retractable ladder that only takes up 8” on the dock, which makes it ideal for use on narrower floating docks and walkways. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide long-lasting service.

Recommended for narrow walkways on floating docks in salt water environments where water level is greater than 14” below deck.

The Lift Ladder is an innovative, retractable ladder. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide long-lasting service.

Recommended for seawalls and fixed docks in salt water environments where mean high water is greater than 27” below deck.

The Floating Dock Lift Ladder is an innovative, SHORT base retractable ladder. To extend the life of the ladder, simply pull up the lower section above the water line to help eliminate marine growth. The plastic coated lift cable helps provide long-lasting service.

Recommended for floating docks in salt water environments where water level is greater than 14” below deck.

27”

8”

20”

27”

8”

L-FPL4L-FPL5L-FPL6L-FPL7

4567

Item

# 2

”ste

ps

Step

sL-FPL4WL-FPL5WL-FPL6WL-FPL7W

Item

# 4

”ste

ps L-FDFPL4L-FDFPL5L-FDFPL6L-FDFPL6

4567

Item

# 2

”ste

ps

Step

sL-FDFPL4WL-FDFPL5WL-FDFPL6WL-FDFPL6W

Item

# 4

”ste

ps

L-L4L-L5L-L6L-L7

Item

# 2

”ste

ps L-L4WL-L5WL-L6WL-L7W

L-FDL4L-FDL5L-FDL6L-FDL7

4567

Item

# 2

”ste

ps

Step

sL-FDL4WL-FDL5WL-FDL6WL-FDL7W

Item

# 4

”ste

ps

*Dimensions are approximate.

Model Shown: L-FDFPL4W

Model Shown: L-FDL4W

Model Shown: L-FPL5W

Model Shown: L-L5W




3’4’5’6’M

ax. R

each

3’4’5’6’M

ax. R

each4

567

Step

s 4’5’6’7’M

ax. R

each

Item

# 4

”ste

ps

Max

. Rea

ch 4’5’6’7’

13”

20”

14”

20”

14”

Ladders

25

Piling Caps

Round Cone Round Flat

Square Cone Square Flat

*For additional sizes, please call or visit our website *For additional sizes, please call or visit our website

*For additional sizes, please call or visit our website *For additional sizes, please call or visit our website

3½”x3½”3½”x5½”5½”x5½”6”x6”10”x10”12”x12”14”x14”16”x16”18”x18”20”x20”

SizePCBC-SQ03.5

PCBC-SQ03.5x5.5PCBC-SQ5.5PCBC-SQ06PCBC-SQ10PCBC-SQ12PCBC-SQ14PCBC-SQ16PCBC-SQ18PCBC-SQ20

Item

# (B

lack

) PCWC-SQ03.5PCWC-SQ03.5x5.5PCWC-SQ5.5PCWC-SQ06PCWC-SQ10PCWC-SQ12PCWC-SQ14PCWC-SQ16PCWC-SQ18PCWC-SQ20

Item

# (W

hite

) 3½”x3½”6”x6”7½”x7½”8”x8”10”x10”12”x12”

SizePCBF-SQ03.5

PCBF-SQ06PCBF-SQ07.5PCBF-SQ08PCBF-SQ10PCBF-SQ12

Item

# (B

lack

) PCWF-SQ03.5PCWF-SQ06PCWF-SQ07.5PCWF-SQ08PCWF-SQ10PCWF-SQ12

Item

# (W

hite

)

Size

(Inc

hes)

Item

# (B

lack

)

Item

# (W

hite

)

Item

# (B

lack

)

Item

# (W

hite

)

Size

(Inc

hes)5½

66½77½88½99½1010½1111½1212½1313½1414½1515½1616½1717½18

PCBC-05.5PCBC-06.0PCBC-06.5PCBC-07.0PCBC-07.5PCBC-08.0PCBC-08.5PCBC-09.0PCBC-09.5PCBC-10.0PCBC-10.5PCBC-11.0PCBC-11.5PCBC-12.0PCBC-12.5PCBC-13.0PCBC-13.5PCBC-14.0PCBC-14.5PCBC-15.0PCBC-15.5PCBC-16.0PCBC-16.5PCBC-17.0PCBC-17.5PCBC-18.0

PCWC-05.5PCWC-06.0PCWC-06.5PCWC-07.0PCWC-07.5PCWC-08.0PCWC-08.5PCWC-09.0PCWC-09.5PCWC-10.0PCWC-10.5PCWC-11.0PCWC-11.5PCWC-12.0PCWC-12.5PCWC-13.0PCWC-13.5PCWC-14.0PCWC-14.5PCWC-15.0PCWC-15.5PCWC-16.0PCWC-16.5PCWC-17.0PCWC-17.5PCWC-18.0

PCBF-05.5PCBF-06.0PCBF-06.5PCBF-07.0PCBF-07.5PCBF-08.0PCBF-08.5PCBF-09.0PCBF-09.5PCBF-10.0PCBF-10.5PCBF-11.0PCBF-11.5PCBF-12.0PCBF-12.5PCBF-13.0PCBF-13.5PCBF-14.0PCBF-14.5PCBF-15.0PCBF-15.5PCBF-16.0PCBF-16.5PCBF-17.0PCBF-17.5PCBF-18.0

PCWF-05.5PCWF-06.0PCWF-06.5PCWF-07.0PCWF-07.5PCWF-08.0PCWF-08.5PCWF-09.0PCWF-09.5PCWF-10.0PCWF-10.5PCWF-11.0PCWF-11.5PCWF-12.0PCWF-12.5PCWF-13.0PCWF-13.5PCWF-14.0PCWF-14.5PCWF-15.0PCWF-15.5PCWF-16.0PCWF-16.5PCWF-17.0PCWF-17.5PCWF-18.0

5½66½77½88½99½1010½1111½1212½1313½1414½1515½1616½1717½18

DockBuilders’ piling caps are an excellent and inexpensive way to protect costly pilings from internal rot. They are made from UV-stabilized polyethylene and are available in ½” increments ranging from 5½” to 18” in diameter. Choose from round cone or round flat, in either black or white. The cone design helps to discourage birds from landing on them.

In addition to the round piling caps, we also offer square piling caps (cone or flat) in many sizes ranging from 3½” to 20”. Our black piling caps have an estimated life of fifteen years, while our white caps have an estimated life of nine years, though the actual life of the piling caps are not guaranteed.

(Black Line Holder) Item# LineHoldB(White Line Holder) Item# LineHoldW

(60D 6” HDG Common Nails) Item# N-60DGC-P(60D 6” S.S. Common Nails) Item# N-60DSS304R-P

Line Holders (Rope Catch)

1¼” SS 304 Roofing Nails (25ct. or ½lb bag)1¼” SS 305 Screws (25 or 100ct.)

Piling Cap Fasteners

Piling Caps


26

Piling Wrap

0.030” Thickness 50ft Roll0.030” Thickness 75ft Roll0.030” Thickness 100ft Roll0.030” Thickness 300ft RollD

escr

ipti

onPW-3630-050PW-3630-075PW-3630-100PW-3630-300

Item

# 0.030” Thickness 40ft Roll0.030” Thickness 60ft Roll0.030” Thickness 80ft Roll0.030” Thickness 300ft RollD

escr

ipti

onPW-4830-040PW-4830-060PW-4830-080PW-4830-300

Item

# 0.030” Thickness 20ft Roll0.030” Thickness 30ft Roll0.030” Thickness 40ft Roll0.030” Thickness 50ft Roll0.030” Thickness 60ft Roll0.030” Thickness 300ft Roll

Des

crip

tionPW-6030-020

PW-6030-030PW-6030-040PW-6030-050PW-6030-060PW-6030-300

Item

#

0.060” Thickness 20ft Roll0.060” Thickness 30ft Roll0.060” Thickness 40ft Roll0.060” Thickness 150ft RollD

escr

ipti

onPW-4860-020PW-4860-030PW-4860-040PW-4860-150

Item

# 0.060” Thickness 20ft Roll0.060” Thickness 30ft Roll0.060” Thickness 40ft Roll0.060” Thickness 150ft RollD

escr

ipti

onPW-6060-020PW-6060-030PW-6060-040PW-6060-150

Item

#

Piling Wrap 60” Wide 0.06”

48” Cable Ties

ITEM# PW-CT48

48” Long Black (175lbs) Cable Ties temporarily hold pile wrap in place for easy nailing.

Piling Wrap Helps Protect Your Piling from marine borers. Our piling wrap is black in color and is a UV stabilized high density polyethylene material that is 0.030” thick and is available in 36”, 48” and 60” widths. Heavier duty 0.060” thick wrap is also available in 48” and 60” widths.

To determine how much piling wrap you need, calculate the circumference (diameter x 3.14) of each piling and add 4-6” for overlap. The 60” wide wrap usually works well in most shallow water applications when only one 60” wide band of wrap around each piling is needed.

In deeper waters, or on applications where you need to wrap more than 60” of the piling, you may want to consider using our 36” or 48” wide wrap as an option. You can install the 36”or 48” wide wrap vertically at any length you desire.

We recommend installing the wrap using 1¼-1½” stainless steel ring-shank roofing nails. For best results, nails should be installed every 1½-2” along the seams. Spacing the nails further apart will allow barnacles to attach & grow between the nails under the seam. Over time, the barnacles will grow and cause the piling wrap to break free of the nails and come unwrapped.

Piling Wrap 48” Wide 0.03” Piling Wrap 60” Wide 0.03”Piling Wrap 36” Wide 0.03”

Piling Wrap 48” Wide 0.06”

*Stainless Type 304 also available (not recommended for salt water)

1¼” SS Type-316 1 lb (175ct.)1¼” SS Type-316 5 lb (875ct.)1½” SS Type-316 1 Lb (130ct.)1½” SS Type-316 5 Lb (650ct.)D

escr

ipti

onN-03DSS316-01N-03DSS316-05N-04DSS316-01N-04DSS316-05

Item

#

316 Stainless Steel Roofing Nails

Piling Wrap

27

Corner Bumper 6”x 6” Corner Bumper 10” x 10” Mounting Hardware

- Made from the highest quality marine-grade vinyl- Outside corners end at a 90° corner- Structural ribs inside provide impact resistance- Inside dimensions cover 5” on each leg

- Protects the side and 1¼” of the top of the dock- Made from tough marine-grade vinyl- Solid flaps attach easily to any dock- Inside dimensions cover 9” on each leg

Dock Pro™ dock edging products are made with double-molded PVC, molecularly bonded for extra durability and protection.

Made from 85% recycled material.

Item# VE-TMP-5001B (Black)Item# VE-TMP-5001W (White)







Item# VE-TMP-C06B (Black)Item# VE-TMP-C06W (White)

Item# VE-TMP-C10B (Black)Item# VE-TMP-C10W (White)

#10 x 1¼” Stainless Steel Screws(25 or 100ct.)

Item# S-1.25SS305

Item# W-#10FinishSS

#10 Stainless Steel Finish Washers(25 or 100ct.)

31/8”H x 2"W x 10'L 35/8”H x 23/8”W x 10’L 31/2”H x 13/8”W x 10’LApproximate DimensionsApproximate DimensionsApproximate Dimensions

Dock Bumpers

Mounts Horizontally Mounts HorizontallyMounts Horizontally

or Vertically

Approximately 30 screws and washers are recommended per 10’ section of bumper.

Screws

Washers

Commercial Grade Side GardLarge Commercial Grade P-ShapeSmall Commercial Grade P-Shape

Dock Bumpers


28

Straight Ladder

Smooth rolling wheels offer substantial dock cushioning and feature molded-in valves to adjust the level of firmness.

Heavy duty, hot-dipped galvanized hardware mounts securely to the dock.

12” and 18” wheels use a large 2” diameter axle housing for maximum strength.

Choose from corner mount or straight mount.

Dock ProTM Inflatable Dock Wheels

Item

#

Whe

el D

iam

eterDW-TMP-1078

DW-TMP-1079DW-TMP-1072DW-TMP-1073DW-TMP-1081DW-TMP-1082

9”9”12”12”18”18”

Des

crip

tion Dock Pro Inflatable Dock Wheel - 9” Corner Mount

Dock Pro Inflatable Dock Wheel - 9” Straight MountDock Pro Inflatable Dock Wheel - 12” Corner MountDock Pro Inflatable Dock Wheel - 12” Straight MountDock Pro Inflatable Dock Wheel - 18” Corner MountDock Pro Inflatable Dock Wheel - 18” Straight Mount

For B

oat S

ize <20’

<20’20’-30’20’-30’30’-45’30’-45’

Straight Ladder

Dock Pro heavy duty, vinyl bumpers are ideal for rough conditions, and can take a beating. Made from UV resistant, marine-grade vinyl, they provide excellent protection for your boat and dock. Straight piece can be mounted horizontally or vertically. Corner piece provides superior impact protection on dock corners. Both bumpers have inflation valves for easy adjustment to desired firmness. Pre-drilled for easy, permanent mounting.

Dock ProTM Inflatable Heavy Duty Vinyl Dock Bumpers

Item

# VE-TMP-IDB-SVE-TMP-IDB-C

Des

crip

tion Inflatable Heavy Duty Vinyl Bumper Straight Mount - 35½”L x 3”W x 5½”H

Inflatable Heavy Duty Vinyl Bumper Corner Mount - 12”L x 12”W x 5½”H

Dock Bumpers

29

Flexmaster Dock Fenders are ideal for rough conditions and are designed to handle most boats ranging from 30’ to 90’. They are extruded from a special PVC compound that is UV resistant and won’t be affected by marine borers or barnacles. Choose from black or white color, neither will mark your boat. Flexmaster Fenders are designed to mount to any nominal 2” x 4” or 4” x 4” pressure treated or plastic lumber. Flexmaster end caps may also be added to dress up your fender installation, giving it a clean, professional look. Custom aluminum mounting brackets are also available for docks without raised pilings.

Flexmaster Fenders Unmounted

Flexmaster End Caps

Flexmaster Dock

Features:•Extruded from a Special PVC

Compound•Black Will Not Mark Boat•Designed to Mount to Any Nominal

2” x 4” or 4” x 4”•UV Resistant; Not Affected by

Marine Borers or Barnacles•Good for Boats up to 90’ in Length

Shown with:• FM-06B• FM-ECB• FM-RPB-06-24

6’8’10’12’D

escr

ipti

onFM-06BFM-08BFM-10BFM-12BIt

em#

blac

k FM-06WFM-08WFM-10WFM-12W

Item

# w

hite

Flexmaster Fender only. Does not include end cap or recycled lumber.

FM-ECB

Item

# bl

ack FM-ECW

Item

# w

hite

End Cap

Des

crip

tion

Flexmaster End Caps are designed for use with4” x 4” lumber and can be cut for 2” x 4” lumber.

Flexmaster Dock Fenders


30

Recycled Plastic Lumber Fender Brackets

Flexmaster Fenders 4x4 Mounted

FM-M-06B-44FM-M-08B-44FM-M-10B-44FM-M-12B-44It

em#

blac

k FM-M-06W-44FM-M-08W-44FM-M-10W-44FM-M-12W-44It

em#

whi

te

*Fully assembled and mounted fender Includes:1-Flexmaster Fender1-Flexmaster End Cap1-Recycled Plastic Lumber 4” x 4”

6’8’10’12’D

escr

ipti

on

Flexmaster Fenders 2x4 Mounted

FM-M-06B-24FM-M-08B-24FM-M-10B-24FM-M-12B-24It

em#

blac

k FM-M-06W-24FM-M-08W-24FM-M-10W-24FM-M-12W-24It

em#

whi

te

*Fully assembled and mounted fender Includes:1-Flexmaster Fender1-Flexmaster End Cap1-Recycled Plastic Lumber 2” x 4”

6’8’10’12’D

escr

ipti

on

Shown with:• FM-M-06B-44• FM-BR05

1’ (1’ Up)3’ (1’ Up & 2’ Down)5’ (2’ Up & 3’ Down)

Des

crip

tionFM-BR01

FM-BR03FM-BR05

Item

#

Constructed from Marine-grade 6061 Aluminum, these fender brackets are perfect for use in lieu of piling. Each standard channel width is 4” to accommodate nominally sized 4” x 4” board.

Custom lengths also available.

Des

crip

tion

Item

# 2”x4”x6’ Recycled Plastic Lumber2”x4”x8’ Recycled Plastic Lumber2”x4”x10’ Recycled Plastic Lumber2”x4”x12’ Recycled Plastic Lumber4”x4”x6’ Recycled Plastic Lumber4”x4”x8’ Recycled Plastic Lumber4”x4”x10’ Recycled Plastic Lumber4”x4”x12’ Recycled Plastic Lumber

FM-RPL-06-24FM-RPL-08-24FM-RPL-10-24FM-RPL-12-24FM-RPL-06-44FM-RPL-08-44FM-RPL-10-44FM-RPL-12-44

Flexmaster Dock Fenders

31

Mooring Products

The SlideMoor™ Floating Dock Mooring System “FDB” is the evolution for securing floating docks. The SlideMoor FDB is a better alternative to hoops, rollers, or any other mechanical attachment. Using the SlideMoor Patented Technology, the FDB is easily fixed to pilings or seawalls, and provides a secure, long-lasting fastening system for your floating dock.

The SlideMoor FDB can be mounted either to the top or side of the floating dock. The 18 inch FDB is typically used for midsized / commercial docks.

Please review the SlideMoor™ page on our Website for details.

12” SlideMoor FDB

I-Be

am (f

or F

lat M

ount

)

Item

# SM-FDB-12-S08SM-FDB-12-S10SM-FDB-12-S12SM-FDB-12-S14

SM-FDB-12-Y08SM-FDB-12-Y10SM-FDB-12-Y12SM-FDB-12-Y14

XXXX

----

24” SlideMoor FDB

I-Be

am (f

or F

lat M

ount

)

Item



XXXX

----

18” SlideMoor FDB

I-Be

am (f

or F

lat M

ount

)

Item



XXXX

----

Y Be

am (f

or P

iling

Mou

nt) -

---

XXXX

Y Be

am (f

or P

iling

Mou

nt) -

---

XXXX

Y Be

am (f

or P

iling

Mou

nt) -

---

XXXX

Trac

k Le

ngth 8’

10’12’14’

8’10’12’14’

Trac

k Le

ngth 8’

10’12’14’

8’10’12’14’

Trac

k Le

ngth 8’

10’12’14’

8’10’12’14’

Mooring Products


32

SlideMoor™ is a boat docking system that brings together many of the advantages of a floating dock with the appeal of a traditional fixed dock. The system makes docking safer and easier while mitigating the risks associated with tidal change, wind, and wave activity.

SlideMoor™ takes the guesswork out of tying up your boat, solving many of the docking and mooring issues encountered by boaters. This simple, yet effective system, secures your boat tightly to a sliding bumper on one side only. Fastened to your piling, marine-grade aluminum tracks are available in lengths up to 25 feet to accommodate most tidal swings.

SlideMoor™ eliminates the need for fenders, bumpers, spring lines, bowlines, stern lines, mooring whips, and outer tie pilings.

The vertical motion caused by waves and tides moves the maintenance-free slide up and down with the boat. Lateral movement is practically eliminated with the system. Loading and unloading becomes safer and easier because the boat is tied tightly to the SlideMoor™ bumper, merely inches from your dock.

Please review the SlideMoor™ page on our Website for details.

18” SlideMoor Plus < 30’

I-Be

am (f

or F

lat M

ount

)

Item

# SM-PLUS-18-S08SM-PLUS-18-S10SM-PLUS-18-S12SM-PLUS-18-S14

SM-PLUS-18-Y08SM-PLUS-18-Y10SM-PLUS-18-Y12SM-PLUS-18-Y14

XXXX

----


I-Be

am (f

or F

lat M

ount

)

Item



XXXX

----


I-Be

am (f

or F

lat M

ount

)

Item



XXXX

----

Y Be

am (f

or P

iling

Mou

nt) -

---

XXXX

Y Be

am (f

or P

iling

Mou

nt) -

---

XXXX

Y Be

am (f

or P

iling

Mou

nt) -

---

XXXX

Trac

k Le

ngth 8’

10’12’14’

8’10’12’14’

Trac

k Le

ngth 8’

10’12’14’

8’10’12’14’

Trac

k Le

ngth 8’

10’12’14’

8’10’12’14’

Mooring Products

33

TideSlide Mooring Products provide safe and secure tie-up and free vertical movement of your boat. TideSlides are constructed of Type 316 stainless steel and ultra high molecular weight polyethylene, a combina-tion that will stand up to the harshest conditions.

TideSlide products are compact and mount totally out of the way. TideSlide’s unique patented design allows the unit to “ride” waves, wakes, and tides and still provide rotational movement of the mooring block. Any boat, yacht, or ship will benefit from the reduced mooring stresses that are realized from uti-lizing TideSlide mooring products.

TideSlides eliminate the slack line nec-essary in conventional tie-up, remov-ing the guesswork on how long lines need to be for any given tide. Simply pull up to the dock and tie-up with nice, snug lines. Without slack in the lines, excess energy is not generated with your boat springing against the lines. TideSlide’s vertical movement absorbs the built up energy and allows your boat to be safely and securely held while winds, waves, and the tide do their thing.

YS Series (Yacht Class)

Solid

Sha

ft D

iam

eter

Item

# TS-YS-048TS-YS-060TS-YS-072TS-YS-084TS-YS-096TS-YS-108TS-YS-120TS-YS-132TS-YS-144

1½”1½”1½”1½”1½”1½”1½”1½”1½”

TS Series (Heavy Duty)

Solid

Sha

ft D

iam

eter

Item

# TS-TS-048TS-TS-060TS-TS-072TS-TS-084TS-TS-096TS-TS-108TS-TS-120TS-TS-132TS-TS-144

1”1”1”1”1”1”1”1”1”

MY Series (Mega Yacht Class)

Solid

Sha

ft D

iam

eter

Item

# TS-MY-048TS-MY-060TS-MY-072TS-MY-084TS-MY-096TS-MY-108TS-MY-120TS-MY-132TS-MY-144

2½”2½”2½”2½”2½”2½”2½”2½”2½”

HY Series (Heavy Yacht Class)So

lid S

haft

Dia

met

er

Item

# TS-HY-048TS-HY-060TS-HY-072TS-HY-084TS-HY-096TS-HY-108TS-HY-120TS-HY-132TS-HY-144

2”2”2”2”2”2”2”2”2”

Tide

Slid

e Le

ngth 48”

60”72”84”96”108”120”132”144”

Tide

Slid

e Le

ngth 48”

60”72”84”96”108”120”132”144”

Tide

Slid

e Le

ngth 48”

60”72”84”96”108”120”132”144”

Tide

Slid

e Le

ngth 48”

60”72”84”96”108”120”132”144”

Reco

mm

ende

d Bo

at S

ize 30’-55’

30’-55’30’-55’30’-55’30’-55’30’-55’30’-55’30’-55’30’-55’

Reco

mm

ende

d Bo

at S

ize < 30’

< 30’< 30’< 30’< 30’< 30’< 30’< 30’< 30’

Reco

mm

ende

d Bo

at S

ize 81’-140’

81’-140’81’-140’81’-140’81’-140’81’-140’81’-140’81’-140’81’-140’

Reco

mm

ende

d Bo

at S

ize 56’-80’

56’-80’56’-80’56’-80’56’-80’56’-80’56’-80’56’-80’56’-80’

Solid Stainless Steel Shafts

Features Include:•Super Strength & Low Profile•Completely Self-Adjusting•Maintenance Free•Secure & Tight Tie-Up•Easy In & Out Line Handling,

Convenient Built-In Line Hook

•Built-to-last with High-Strength Polymers & 316 Stainless Steel

•Sizes for any Boat, Yacht, or Floating Structure!

Mooring Products


34

Premium (Heavy Duty w/ Rocker Base)

MW-1400MW-1600MW-1800

Item

#

Deluxe (Standard Duty w/ Fixed Base)

8’12’14’16’

Whi

p Le

ngthMW-080

MW-120MW-140MW-160

Item

#

Mooring Whips are an economical and safe way to protect your boat against costly dockside and seawall damage. The Mooring Whip system pulls your boat a safe, convenient distance away from the dock thereby protecting it from the damaging forces of waves, wind, tides, and wakes.

Mooring Whips are made of high quality solid fiberglass poles, aluminum-magnesium base units, tips, and mooring whip lines. Each set comes complete with all of the hardware necessary for installation. Mooring Whips and Premium Mooring Whips are sold in pairs. Whips can be easily removed for storage.

Features Include:•2 Corrosion Protected Marine-Grade Aluminum Bases•2 Solid Fiberglass Whips With Roller Tips•2 Cleats for Whip Line Adjustment•All Necessary Hardware & Lines•Complete Installation Instructions

Premium, Heavy Duty Mooring Whips are equipped with unique rocker arm bases that return the whip poles to the vertical position when not in use. These are ideal for sailboats and larger, heavier, or high profile boats.

Deluxe, Standard Duty Mooring Whips are equipped with fixed angle bases and are designed for ski boats, runabouts, center consoles, and bass boats.

Up to 20,000lbs*20,000 - 36,000lbs*36,000 - 48,000lbs*

Boat

Wei

ghtUp to 2,500lbs*

2,500 - 5,000lbs*5,000 - 10,000lbs*10,000 - 20,000lbs*

Boat

Wei

ght.813”

.813”

.813”

.813”

Whi

p D

iam

eter Up to 20’*

18’-23’*24’-28’*29’-33’*

Boat

Len

gth 14’

16’18’

Whi

p Le

ngth 1”

1”1”

Whi

p D

iam

eter Up to 33’*

34’-46’*47’-56’*

Boat

Len

gth

*Weight is more important than Length*Weight is more important than Length

Note: Always follow manufacturer’s installation and use instructions carefully. Not recommended for use during extreme weather events.

Mooring Products

35

Mooring Snubbers

MS-TMP-307MS-TMP-308MS-TMP-309

Item

# Fits Line Size 3/8” Fits Line Size 5/8” Fits Line Size 3/4”

Des

crip

tion

Made from super elastic isoprene natural rubber, the self-locking internal system design eliminates chaffing. These LineSaver Mooring Snubbers help prevent mooring line breakage along with compensating for sudden jolts and excess stretching of lines beyond parting strength. The LineSaver also provides maximum protection against the stress caused by wind, waves, and wakes.

•NOtoolsneededtoinstall.

• Locks lines safely and securely. Self-lockinginternal system eliminates chafing.

•3sizestomatchlinediameter

Mooring Buoys (Sur-Moor)The sole purpose of the mooring buoy is to support the mooring chain. The two preferred designs for mooring buoys are a traditional buoy with hardware or a buoy with a tube through the center. Both offer reliable flotation and will last for several seasons, depending upon the salinity of the water. Freshwater applications will extend the useful life of any mooring system. A permanent mooring system, when properly designed, should securely position a boat so that it can be left unattended, with little attention, for long periods of time. Each system usually consists of a mooring buoy (to float the chain), a mooring anchor, and a length of chain that runs between the anchor and the mooring buoy. Also, the proper ground tackle includes correct-sized galvanized shackles and swivels. Always keep in mind that the mooring system is only as reliable as the current conditions of the environment. All Taylor Made Sur-Moor™ Buoys are built to withstand the constant abuse of most mooring environments.

nananana

Tube

Dia

met

erMB-T12MB-T15MB-T18MB-T24

Item

# 12” Sur-Moor Mooring Buoy15” Sur-Moor Mooring Buoy18” Sur-Moor Mooring Buoy24” Sur-Moor Mooring BuoyD

escr

ipti

on12”15”18”24”

Buoy

Dia

met

er 3060100240

Buoy

ancy

(lbs

)2”2”2½”2½”3”Tu

be D

iam

eterMB-T3C12

MB-T3C15MB-T3C18MB-T3C24MB-T3C30

Item

# 12” Sur-Moor T3C Mooring Buoy15” Sur-Moor T3C Mooring Buoy18” Sur-Moor T3C Mooring Buoy24” Sur-Moor T3C Mooring Buoy30” Sur-Moor T3C Mooring Buoy

Des

crip

tion12”

15”18”24”30”Bu

oy D

iam

eter 30

60100240460Bu

oyan

cy (l

bs)

WARNING: The sole purpose of the mooring buoy is to support the mooring chain. The boat should be tied to the anchor chain, never tied to the buoy or hardware.

Sur-Moor Traditional BuoyHardware included.

Sur-Moor T3C Mooring BuoyTube through the center.Hardware not included.

Mooring Products


36

Flip-up cleats are great for applications where safety on the dock may be a concern. They remain folded down into a low-profile base when not in use and can simply be flipped up for easy use. They are fabricated from aluminum for corrosion resistance. The mounting holes on these cleats are recessed so that the bolts stay clear of the attached lines.

Clever Cleat provides a fast, convenient, and reliable way to secure marine lines without the difficulties and frustrations of complicated knots.

The Clever Cleat secures ropes very effectively using a combination of spring pressured teeth and rope positioning. By simply depressing the plunger, the bottom teeth lower, which allows you to easily loop the rope around the cleat base a couple of times under the gripping area. Release the plunger to allow the teeth to bite and your rope is now secure.

Our durable, cast iron cleats will last for years. They are hot-dipped galvanized (HDG) to protect from the elements and are cast with 2 recessed hex bolt holes for easy installation using hex bolts. Galvanized dock cleats are a very economical solution for your docking needs.

Our cast aluminum, straight dock cleats offer a traditional look that will add a touch of class to your dock. The corrosion-resistant aluminum composition will allow them to last for years, even in harsh marine environments. They can be mounted horizontally or vertically and feature recessed hex bolt holes for easy mounting using ½” hex bolts.

Our S-Cleats are fabricated from aluminum for corrosion resistance. This cleat is “S” shaped which makes it easier to loop the lines around the horns. The ½” mounting holes are recessed so the bolts stay clear of attached lines.

Mounting Hardware (Stainless Steel)

Cleat-CC

Item

# Cleat-06A-FU Cleat-08A-FUIt

em#

Cleat-10A-SCleat-12A-SCleat-15A-SCleat-18A-SCleat-10A-S-WCleat-12A-S-WCleat-15A-S-WCleat-18A-S-W

Item

#

Cleat-08GCleat-10GCleat-12GCleat-14G

Item

# Cleat-08ACleat-10ACleat-12ACleat-14A

Item

# 8” Straight Cleat10” Straight Cleat12” Straight Cleat14” Straight CleatD

escr

ipti

on

10” S-Cleat12” S-Cleat15” S-Cleat18” S-Cleat10” S-Cleat (White)12” S-Cleat (White)15” S-Cleat (White)18” S-Cleat (White)

Des

crip

tion

8” Straight Cleat10” Straight Cleat12” Straight Cleat14” Straight CleatD

escr

ipti

on

6” Flip-Up Cleat8” Flip-Up Cleat

Des

crip

tion 81/2” Clever Cleat

Des

crip

tion

½”½”½”½”

Bolt

Siz

e

½”½”½”½”½”½”½”½”

Bolt

Siz

e

5/16”3/8”3/8”1/2”

Bolt

Siz

e

½”½”

Bolt

Siz

e 3/8”

Bolt

Siz

e

Des

crip

tion

Item

# TB-3804SSTB-3805SSW-38SSF W-38SS HN-38SS HN-38SSL TB-1204SSLB-1204SSW-12SSHN-12SSHN-12SSL

3/8” x 4” Hex Bolt (full thread)3/8” x 5” Hex Bolt (full thread)3/8” x 11/2” Fender Washer3/8” Flat Washer3/8” Hex Nut3/8” Nylon Hex Lock Nut1/2” x 4” Hex Bolt (full thread)1/2” x 4” Lag Bolt1/2” Flat Washer 1/2” Hex Nut 1/2” Nylon Hex Lock Nut

Cleat angles bolt to the outside joist offering greater strength than simply bolting through deck boards. For 8” - 12” HDG cleats*.

Cleats

Also Availablein White

Item

#

Des

crip

tionCleatAngle

TB-38045W-38GFHN-38

Angle Mounting Bracket3/8” x 41/2” Hex Bolt (full thread)3/8” x 11/2” Fender Washer 3/8” Hex Nut

* 5/16” Hardware needed for 8” Cleats

Galvanized Steel Cleats

Flip-Up Aluminum Cleats Clever Cleat Mounting Hardware (Galvanized)

“S” Style Aluminum CleatsStraight Aluminum Cleats

Cleats

37

Boarding Ramps

The Permaport PWC Lift keeps your jet ski clean and ready to go. It is available in speckled grey or tan and is filled with expanded polystyrene for positive buoyancy. The Permaport PWC lift can be front or side mounted to either a fixed or floating dock using the optional mounting hardware kits. The Permaport is designed to accommodate most personal watercraft weighing up to 1,500 lbs.

•Handles Most PWCs up to 1,500 lbs.•6 Rollers Included•Rotationally Molded•EPS Foam Filled•Tan or Grey Speckled Color•Skid-Resistant Surface•Tie Down Cleat Included•Self-Centering Entry Roller for Easy

Docking•Mounting Hardware Attachment Kits are

Available for Fixed or Floating Docks

*Please note that this kit does not include the steel pipe for the hardware kit to slide up and down on.

Textured Skid-Resistant Surface

Tie Down Cleat

Optional Side Rollers

Available inGrey or Tan

Des

crip

tionPerma-62-Grey

Perma-62-TanPerma-58-GreyPerma-58-TanPerma-H-F-FixedPerma-H-F-FloatPerma-H-JK-GreyPerma-H-JK-TanPerma-H-SMPerma-H-SRK

Item

# Permaport Plus 62”W x 138”L x 12”D PWC Lift (Grey) Permaport Plus 62”W x 138”L x 12”D PWC Lift (Tan) Permaport Slim 58”W x 138”L x 12”D PWC Lift (Grey) (Perfect size for fitting side by side in a 10’ slip)Permaport Slim 58”W x 138”L x 12”D PWC Lift (Tan) (Perfect size for fitting side by side in a 10’ slip)Permaport Mounting Hardware Kit (Front Mount for attaching to a Fixed Dock)*Permaport Mounting Hardware Kit (Front Mount for attaching to a Floating Dock) Permaport Joiner Kit (Grey Color) (Joins the rear end of two ports that are mounted side-by-side) Permaport Joiner Kit (Tan Color) (Joins the rear end of two ports that are mounted side-by-side) Permaport Mounting Hardware Kit (Side Mount for attaching to a Fixed or Floating Dock)*Permaport Side Roller Kit (Helps reduce lateral rocking of deep hull PWCs)

Permalaunch for Kayaks coming soon!

Permaport Pwc Lift


38

Permaport PWC Lift

Taylor Made Oil-Free D-Icer™ is Energy Efficient and Pollution-Free! Innovative motor design, high-efficiency, and extra features to leave the competition behind. Powerful, submersible, motor-driven water circulation unit helps prevent ice formation during winter months by continuously propelling warmer subsurface water up to the surface which is ideal for use around a boat or dock. The unique one-piece shroud design prevents large debris from being sucked through and damaging the propeller, a major cause of failure in other ice prevention devices.

Oil-Free D-Icer™

D-Icer-115V-.50HP-US-050D-Icer-115V-.50HP-US-100D-Icer-115V-.75HP-US-050D-Icer-115V-.75HP-US-100D-Icer-115V-1.0HP-US-050D-Icer-115V-1.0HP-US-100

Item

# 50’100’50’100’50’100’

Cord

Len

gth50’ Dia. Circle

50’ Dia. Circle75’ Dia. Circle75’ Dia. Circle90’ Dia. Circle90’ Dia. Circle

Aff

ecte

d A

rea

• Oil-free design has no chance of oil leaks

• More energy efficient than oil-filled units

• Molded, glass-filled nylon shroud blocks debris

• Stainless steel motor shaft and motor housing eliminates corrosion

• Dual internal seals and double lip shaft for long life

De Icer

Also available in 230v/50Hz

De Icer

39

Power Pedestals

Co

nfi

gu

rati

on 20 amp 125v GFI Duplex Receptacle

20 amp 2 Pole Hard-Wired Breaker (Extra Breaker)30 amp 125v Marine Twist Lock Receptacle50 amp 125/250v Marine Twist Lock ReceptacleSingle Phase Copper Bus BarWater Connection ¾” (Not available on this model)

PP-E-N1x1-

x1-X-

PP-E-N2x1-

x2-X-

PP-E-N3x1-

x1x1X-

PP-E-N4x1--

x2X-

The Newport Harbor Mate represents the leading edge of Marina Power and Lighting equipment. The most innovative mini-power center available, the Newport Harbor Mate hosts a variety of electrical services contained in a compact yet strong housing.

• Designed to Mount on a Dock Box or Piling• Photocell Controlled LED Light with Amber Lens for Bug

Reduction• White Heavy Resin Housing with a Two-Part Polyurethane

Coating for a UV Resistant, Long Lasting Finish

• Electronic Metering (One or Two Element Meters Available)

• 304L Stainless Steel Stand• Single or Dual Phone, Cable, or

Internet Connections• Clear Lens

Standard Features:

Available Options:

* 20 Amp GFI receptacles are not to be used for shore power.

14.5”

For matching dock box, see page 69

Optional Stand Upgrade* Available for Newport Harbor Mate - Stainless Steel Type 304 Casing, powder coated white - Water Connection ¾” (x2) - 42.2”H x 9.88”W x 7”D

42.2”

*Stand upgrade must be ordered with Newport Harbor Mate. Contact us for details.

10.5”

7.5” Co

nfi

gu

rati


20 amp 2 Pole Hard-Wired Breaker (Extra Breaker)30 amp 125v Marine Twist Lock Receptacle50 amp 125/250v Marine Twist Lock ReceptacleSingle Phase ¼” Copper Bus BarWater Connection ¾”

PP-E-H0x1-

x1-Xx1

PP-E-H1x1x1x1-Xx1

PP-E-H2x1-

x2-Xx1

PP-E-H3--

x1x1Xx1

PP-E-H4x1x1-

x1Xx1

PP-E-H5x2---Xx1

Introduced in 1993 and with thousands in service, this popular unit offers a low cost alternative to the Lighthouse for smaller boat applications. The attractive Hatteras Light will welcome your guests in style. They’re great not only for marinas, but also for your dock, pool, lawn, and deck areas.

• Photocell Controlled LED Light with Amber Lens for Bug Reduction

• White Heavy Resin Housing with a Two-Part Polyurethane Coating for a UV Resistant, Long Lasting Finish

• Digital Electronic Metering (One or Two Element Meter Available)

• Single or Dual Phone, Cable, or Internet Connections• Single or Dual ½” or ¾” Silcock with Stainless Steel

Handles• Clear Lens• Also Available as a Bollard Light, see page 47

Standard Features: Available Options:


LED Lighting

LED Lighting

31”

Hatteras Light

Newport Harbor Mate

Power Pedestals


40

The Lighthouse SS (Stainless Steel) offers the same standard features and available options as the standard Lighthouse, except for the upgraded housing which is made with high quality 316L stainless steel for superior quality and performance.

44”

Co

nfi

gu

rati


20 amp 2 Pole Hard-Wired Breaker (Extra Breaker)30 amp 125v Marine Twist Lock Receptacle50 amp 125/250v Marine Twist Lock ReceptacleSingle Phase 3/8” Copper Bus BarWater Connection 3/4” with ¼Turn Ball Valves

PP-E- L2-SSx1-

x1x1X

x2

PP-E- L3-SSx1-

x2x2X

x2

• Heavy 316L Stainless Steel Housing that is Powder Coated with a Polyester Resin


• Lockable Weatherproof Doors which Protect Breakers & Receptacles while in use (A Requirement of N.F.P.A. 303 & NEC Art. 555)

• Hose & Cable Brackets• Hingeless Base Providing Easy Access for Both

Installation & Maintenance• Backlit Faceplate for Easy Receptacle Plug-In at Night

• Digital Electronic Metering (One, Two, or Three Element Meters Available)

• 100A 120/240V Pin & Sleeve (Single Phase)• 100A 120/208V Pin & Sleeve (3 Phase)• Wireless Remote Metering for Electric & Water• Transient Voltage Surge Suppressor (TVSS) to Protect from

Voltage Surges, Spikes or Lightning on the AC Power Line (Extends Warranty on Internal Parts to 3 Years)

• Single or Dual Phone, Cable, or Internet Connections• Stainless Steel Door Hinge on Receptacle Main Doors• Clear Lens




• Lockable Weatherproof Doors which Protect Breakers & Receptacles while in use (A Requirement of N.F.P.A. 303 & NEC Art. 555)

• Bus Bar Rating• Hose & Cable Brackets• White Heavy Resin Housing with a Two-Part

Polyurethane Coating for a UV Resistant, Long Lasting Finish

• Hingeless Base Providing Easy Access for Both Installation & Maintenance

• Backlit Faceplate for Easy Receptacle Plug-In at Night• Stainless Steel Door Hinge on Receptacle Main Doors

• Digital Electronic Metering (One, Two or Three Element Meters Available)

• 100A 120/240V Pin & Sleeve (Single Phase)• 100A 120/208V Pin & Sleeve (3 Phase)• Built-In Meter Socket• Wireless Remote Metering for Electric & Water• Transient Voltage Surge Suppressor (TVSS) to Protect from

Voltage Surges, Spikes or Lightning on the AC Power Line (Extends Warranty on Internal Parts to 3 Years)

• Single or Dual Phone, Cable, or Internet Connections• Base Extension• Clear Lens or Custom Color Lens


PP-E-L1-SSx1-

x2-X

x2

13.75”

9.875”

Co

nfi

gu

rati


20 amp 2 Pole Hard-Wired Breaker (Extra Breaker)30 amp 125v Marine Twist Lock Receptacle50 amp 125/250v Marine Twist Lock ReceptacleSingle Phase 3/8” Copper Bus BarWater Connection 3/4” with ¼Turn Ball Valves

PP-E-L2 x1-

x1x1X

x2

PP-E-L3 x1-

x2x2X

x2

One of our most popular and powerful units, the Lighthouse pedestal has a wide range of features. This stylish power pedestal is recognized throughout the marine industry for its practicality and exceptional durability. Engineered to withstand the most severe weather conditions, lighthouse power pedestals can be found in marinas worldwide.

* 20 Amp GFI receptacles are not to be used for shore power. PP-E-L1 x1-

x2-X

x2

LED Lighting

LED Lighting

44”

Lighthouse

LightHouse SS (Stainless Steel)

Power Pedestals

41

The flagship of Eaton Marina Power’s pedestal line, the Admiral-SS provides amperage capabilities up to 500 Amps and voltages of 480/277 three-phase, 208/120 three-phase, 120/240 single-phase, and combinations of these receptacles in one unit to serve nearly any size vessel.

• Heavy 316L Stainless Steel Housing that is Powder Coated with a Polyester Resin

• Photocell Controlled LED Light with Amber Lens that Provides 360 Degrees of Lighting

• Four 100A Receptacles of Any Two Voltage Combinations; such as 277/480 Three-Phase, 120/208 Three-Phase, or 120/240 Single-Phase

• 200A/480V Receptacles• When the 100A 120/240V Receptacles are used, Two

50 Amp 120/240V Receptacles can also be Provided for a Total of 500 Amps

• 20A/125V GFI Receptacle• (20 Amp GFI Receptacles are not to be used for Shore

Power)• Single or Dual High-Speed Internet Connections• Single or Dual Water ¼Turn Ball Valves with ¾” Hose

Bibs & Stainless Steel Handles• Digital Metering Available• Phone Hookups• Wireless Remote Metering Available for Water &

Electricity• 30A & 50A Twistlocks Available• Clear Lens


51”

Item# PP-E-F1 (10lb Fire Ext.)Item# PP-E-F2 (20lb Fire Ext.)

9.875”

14”

Emergency Response Spill Kit

Item# SK-TMP-123658

Spill Kit Storage Box: UV-resistant polyethylene resin ~ 100% maintenance-free ~ Double-walled lid ~ stainless latch ~ weather-proof design

Protect your business from fines, hefty cleanup costs and damages when oil, diesel or gasoline is spilled in your marina. Keep Taylor Made’s Emergency Response Kit on location as part of your quick response plan for unexpected spills. Kit contains (1) PE storage box, (100) oil absorbent 16” x 20” pads, (4) oil absorbent 5” x 10’ booms, (10) disposal bags, (1) pair of nitrile gloves.

LED Lighting

LED Lighting

Complete solution for fire and emergency needs, this pedestal features fire extinguisher storage, an alarm strobe light and an optional life ring.

• LED Light with Red Lens• White 316L Stainless Steel

Powder Coated Housing with Polycarbonate Top Assembly

• Alarm Strobe Light & Siren: Automatically Activated when door is open or life ring is removed.

• 24” Life Ring• Choose either a 10 lb. or 20 lb.

ABC Type Fire Extinguisher

• 30” Life Ring• Clear Lens

Standard Features:

Available Options:

44”

Admiral SS (Stainless Steel)

Firehouse

Power Pedestals


42


• Casing: Maximum 4 Receptacles (6 Poles)• Extruded, Seemless, Marine-Grade Aluminum 6063 with 1/8” Wall Thickness • Welded Base for Extra Strength• All Stainless Steel Fasteners with Nylon Washers• Isolation Plate to Separate Water, Telephone, and TV from Electrical• Each Receptacle Protected by a Thermal Magnetic Circuit Breaker• Marine-Grade Electrical Receptacles are Available in 20 Amp Duplex GFI &

20, 30 & 50 Amp Twist-Lock • Electrical Distribution Block - Direct Feed• Lexan Lenses for the LED Lights are on Three Sides• Cone Top• Powder Coated White Inside & Outside• 15 Year Unconditional Warranty on Structural Integrity of Casing• Listed by Qualified Testing Agency• Water Connection ¾”

• Power Block - Loop Feed (Stud) - Maximum Wire Size 250 MCM Cable

• Electric Meters• Amber Colored Sleeve for

Light Assembly


36”


• Casing: Maximum 6 Receptacles (9 Poles)• Extruded, Seemless, Marine-Grade Aluminum 6063 with 1/8” Wall Thickness• Welded Base for Extra Strength• All Stainless Steel Fasteners with Nylon Washers• Isolation Plate to Separate Water, Telephone, and TV from Electrical • Each Receptacle Protected by a Thermal Magnetic Circuit Breaker• Marine-Grade Electrical Receptacles are Available in 20 Amp Duplex GFI &

20, 30 & 50 Amp Twist-Lock , 100 Amp Single & Three Phase - Pin & Sleeve• Electrical Distribution Block - Direct Feed• Lexan Lenses for the LED Lights are on Three Sides• Cone Top• Powder Coated White Inside & Outside• 15 Year Unconditional Warranty on Structural Integrity of Casing• Listed by Qualified Testing Agency• Water Connection ¾”

• Power Block - Loop Feed (Stud) - Maximum Wire Size 250 MCM Cable

• Electric Meters• Amber Colored Sleeve for

Light Assembly


41”-45”

Feat

ures 20 amp 110v GFI Duplex Receptacle (w/Aluminum Covers)

30 amp 125v Marine Twist Lock Receptacle (w/Aluminum Covers)50 amp 125/250v Marine Twist Lock Receptacle (w/Aluminum Covers)Cable TV / Phone ConnectionWater Connection ¾”Cast Aluminum Hose HolderHeight

Feat

ures 20 amp 110v GFI Duplex Receptacle (w/Aluminum Covers)

30 amp 125v Marine Twist Lock Receptacle (w/Aluminum Covers)50 amp 125/250v Marine Twist Lock Receptacle (w/Aluminum Covers)100 amp 125/250v Single Phase, Pin & Sleeve ReceptacleCable TV / Phone ConnectionWater Connection ¾”Cast Aluminum Hose HolderHeight

PP-SPB-41-4A-350

-x2x2-

x1x2x241”

PP-SPB-41-4A-310

x1x1x2-

x1x2x241”

PP-SPB-45-4A-240

x1x1x2x1x1x2x145”

PP-SPC-36-2A-365

x1x1--

x1x136”

PP-SPC-36-3A-250

x1x2--

x1x136”

PP-SPC-36-3A-305

x1x1x1-

x1x136”

PP-SPC-36-3A-300

x1x1x1x1x1x136”

LED Lighting

LED Lighting

S. King Fulton Slimline 6” Dockside Pedestals

S. King Fulton Standard 8” Dockside Pedestals

Power Pedestals

43

Lighting - 110v

Nautical Dock Lights add a touch of class to your dock or deck. Our Aluminum lights and posts are powder coated in a white, black, bronze, rusty iron, or patina finish. The unique, louvered design reduces glare, casting light only where it is needed. Each light fixture re-quires one 60-watt maximum medium base incandescent, LED, or Fluorescent bulb (not included).

Available in 5 Finishes:New England

Wharf Style Double Gooseneck (DL-14)

shown with 3” round post (DL-3-07) in bronze finish

Black

Patina

White

Bronze

Rust

Lighting - 110v


44

4” Square Posts

Item# DL-14

Metal Double Gooseneck

3” Round Posts

Item# DL-6

Plastic Double Lantern

Item# DL-5

Metal Single Lantern

Item# DL-14A


Item# DL-14B


Item# DL-18A

Metal DL-5 Junction Base

Item# DL-18

Metal DL-5 BaseFor finish options, see page 44.For finish options, see page 44.

For finish options, see page 44.For finish options, see page 44.

Select from any of the post sizes below and match to any of the 110v light fixtures.

For finish options, see page 44.

Available in White only

Oxford Style - For finish options, see page 44. Cape Cod Style - For finish options, see page 44.New England Wharf Style - For finish options, see page 44.

11”

50” 50” 50”

16”

Shown in white Shown in white

Shown in bronze

Shown in white Shown in white

Shown in white

Shown in white

Shown in bronze

1’ Tall 3’ Tall 7’ Tall 9’ TallD

escr

ipti

onDL-3-01DL-3-03DL-3-07DL-3-09

Item

# 1’ Tall 3’ Tall 7’ Tall 9’ TallD

escr

ipti

onDL-4-01DL-4-03DL-4-07DL-4-09

Item

#

Constructed from weather-resistant polymer.

Select from any of the post sizes below and match to any of the 110v light fixtures.

Post top base with junction box.Designed for use with DL-5 Lantern.

Post top base.Designed for use with DL-5 Lantern.

Lighting - 110v

45

Piling Mount Metal Gooseneck

Item# DL-15B


Item# DL-15A


Item# DL-15

Item# DL-13

Metal Single Gooseneck

Item# DL-13A


Item# DL-13B


Oxford Style - For finish options, see page 44. Cape Cod Style - For finish options, see page 44.New England Wharf Style - For finish options, see page 44.

New England Wharf Style - For finish options, see page 44. Oxford Style - For finish options, see page 44. Cape Cod Style - For finish options, see page 44.

25” 25” 25”

69”69”69”

Shown in white Shown in black Shown in bronze

Shown in white Shown in black Shown in bronze

Custom heights available. Call for details. Custom heights available. Call for details. Custom heights available. Call for details.

Lighting - 110v


46

Item# DL-LBB-36 Item# DL-LBB-41 Item# DL-LBC-BELL

•Distributes Light Through Lexan Windows (360° Light)

•Extruded Marine-Grade Aluminum 6063

•Powder Coated White Inside & Outside

•Designed & Built for use in a Corrosive Salt Water Environment

•Listed by Qualified Testing Agency

•6” x 6” x 36”

•LED Lighting

•Amber Colored Sleeve for Light Assembly






•8” x 8” x 41”

•LED Lighting







•6” x 6” x 12”

•LED Lighting


Item# PP-E-HL

The attractive Hatteras Light will welcome your guests in style. They’re great not only for commercial marinas, but also for residential docks and decks.


• White Heavy Resin Housing with a Two-Part Polyurethane Coating for a UV Resistant, Long Lasting Finish

Standard Features:

18” Tall24” Tall36” TallH

eigh

tPP-E-M18 PP-E-M24PP-E-M36

Item

#

The lightweight Mariner Bollard Light is available in 18”, 24”, and 36” tall configurations and may be used in various applications from marina docks, to landscaped areas, golf courses, and beyond. The Mariner is designed to withstand the harsh marine environments from Alaska to the tropics.

18”-36”

LED Lighting

6½”

4”

• LED Lighting• Mounting Base & Painted Pole

Supplied for Desired Height• 18”, 24” or 36” Total Height• Amber Colored Lens

Standard Features:

• Clear LensAvailable Options:

• Clear Lens• Water Connection

Available Options:

7½”

31”

LED Lighting

LED Lighting LED Lighting LED Lighting

Pedestal Light 41”Pedestal Light 36” Dockside Piling Light

Hatteras Bollard Light Mariner Bollard Light

Lighting - 110v

47

Lighting - Solar

Solar Deck/Dock Light

Des

cSolar-LL-Deck

Item

#

Solar Dock Dots are simply the neatest, smallest, solar lights you have ever seen! Super Bright LEDs make these brilliant little guys stand out at night. A nearly flush mount makes them virtually unnoticeable during the day and eliminates any tripping hazards. Easy to install in minutes with a quick 13/8” drill bit or hole saw. A super bright LED and powerful solar panel provide all night illumination. Impress all the neighbors with these simple to install super nifty units! 5-Color Options to choose from: White, Blue, Green, Red, Amber. Great for docks, pilings, decks, walkways, patios, stairs, railings, or landscaping. Replaceable batteries.

Solar Dock Dots 4-Pack Amber LightSolar Dock Dots 4-Pack Blue LightSolar Dock Dots 4-Pack Green LightSolar Dock Dots 4-Pack Red Light Solar Dock Dots 4-Pack White Light

Des

crip

tionSolar-LL-DOT-Amber

Solar-LL-DOT-BlueSolar-LL-DOT-GreenSolar-LL-DOT-RedSolar-LL-DOT-White

Item

#

The Marine-Grade Solar Deck Light is an industrial strength solar powered dock light made from anodized aluminum for superior protection in harsh marine environments. Will not rot from harsh sun exposure! IP 68 Waterproof design.

Super bright LEDs and powerful solar panel provide all night illumination. Low profile design makes it perfect for docks and marina applications needing to provide ambient pathway & dock lighting. Added built in reflector provides extra safety for passing boaters as well makes them ideal for marking swim rafts. Easy hassle-free mounting, no wires, no mess, no electrical cost!

2 Lumens12 Hour+ Run Time

Changeable Battery

5 Lumens18 Hour Run Time

Changeable Battery

Low Profile

* Marine-Grade Aluminum Casing *

Dimensions: 4.25”L x 4.25”W x 1”H

Dimensions: 1.68”D x 1.4”H

LED Lighting

LED Lighting

Solar Dock Dots

Solar Deck Lights

Lighting - Solar


48

This is the latest in Solar Dock Light technology from Lake Lite Inc. Indirect downward lighting provides a unique and outstanding look for your dock. The unit provides a seamless look for your 3½” OD dock post covers or post. Six amazingly bright LEDs placed around the unit shine light downward and outward all around the post creating an amazing look at night. The LEDs illuminate the dock post as well as the dock surface providing indirect lighting that will be sure to astonish! The Larger top allows much more power from the solar panel to ensure full charging even on cloudy days!

During the day the solar panel collects the sun’s energy and charges the batteries. At nightfall, Solar Dock Light’s sensor automatically turns on the super bright LED. With multiple units, your dock will provide an elegantly lit pathway for all to walk on. This unit is hands free and energy efficient. Lasts 18+ hours on a full charge and is brighter than conventional solar garden lights! Yes it lasts all night! Just place it on your dock post and you are ready to go!

Solar Underglow Dock Lite (White LED)Solar Underglow Dock Lite (Amber LED)D

esc.Solar-LL-SDL-UG-W

Solar-LL-SDL-UG-AItem

#

20 Lumens18 Hour Run Time

Changeable Battery

(Designed for 3½” OD post)

The Solar Sky Light with IR sensor is an intelligent outdoor lighting system that provides powerful lighting into an all-in-one compact, easy to install package. During the day, the highly efficient solar panel collects energy from the sun and stores power in the advance lithium battery. At night, the powerful LEDs automatically turn on providing ambient light for all to enjoy.

When motion is detected, the super bright LEDs double in brightness to provide an abundance of extra lighting for anyone in the area. After 5 minutes or when motion is no longer detected, the light drops down in brightness to conserve power. This intelligent feature allows the Solar Sky Light to save power when no one is in range or utilizing the light, meaning much longer run times than you would expect from similar size solar lighting. The IR sensor is the practical way to enjoy brighter than normal light when needed (when someone is near)!

• Self Sufficient• No Electrical Cost• Easy to Install• No Wires or Cables Needed• Long Lasting Lithium Battery• Integrated IR sensor• Compact Design• Cost Savings

Features:

Solar Sky Light with IR Sensor

Des

c.Solar-LL-SKL-IR

Item

#

Dimensions: 17”L x 12”W x 2”H

Pole not included420 Lumens18 Hour Run Time

Changeable Battery

*Larger model available - call for details

LED Lighting

Solar Sky Light

Dimensions: 5”D x 4”H

LED Lighting

Solar Underglow

Lighting - Solar

49

The 8” Solar Piling Light is one of the most advanced, robust, and well-designed solar piling lights to hit the market. Eight super-bright LEDs are positioned facing downward to eliminate blinding eye glare and provide more ambient light. Patented technology allows you to easily change the color and brightness settings using only a magnet. The LEDs have three color settings (white, amber, or blue) and five brightness settings. The aluminum fixture is available in a white or black powder-coated finish to suit your aesthetic requirements.

The Solar Piling Light has an advanced microprocessor control circuit which monitors every aspect of the light and has protective features to prevent overcharging, over discharging, output control, and constant brightness technology. Equipped with the industries latest LiFePo4 battery technology, the Solar Piling Light will run for years on the same battery.

Black Solar Piling Light (White, Amber, or Blue LED)White Solar Piling Light (White, Amber, or Blue LED)

Des

crip

tionSolar-LL-SPL-8-B-M

Solar-LL-SPL-8-W-MItem

#

The Solar Piling Down Light provides unique, appealing, and versatile indirect downward lighting on the dock surface. The separate down light includes 1-meter of wire, which allows mounting of the LED down light unit at any height for desired lighting effect. Its patented design allows you to choose from five brightness settings simply by touching the top of the solar panel with a magnet. The aluminum fixture is available in a white or black powder-coated finish to suit your aesthetic requirements. Optional amber LED is available for turtle-conscious lighting requirements.

The Solar Piling Down Light has an advanced microprocessor control circuit whichmonitors every aspect of the light and has protective features to prevent overcharging, over discharging, output control, and constant brightness technology. Equipped with the industries latest LiFePo4 battery technology, the Solar Piling Down Lights will run for years on the same battery.

35-120Lumens6-18 Hour Run Time

Changeable Battery

40-125Lumens6-26 Hour Run Time

Changeable Battery

Black Solar Piling Down Light - Amber LEDBlack Solar Piling Down Light - White LEDWhite Solar Piling Down Light - Amber LEDWhite Solar Piling Down Light - White LEDD

escr

ipti

onSolar-LL-SPDL-8-B-ASolar-LL-SPDL-8-B-WSolar-LL-SPDL-8-W-ASolar-LL-SPDL-8-W-W

Item

#

LED Lighting

LED Lighting

Solar Piling Light

Solar Piling Down Light

Dimensions: 8”D x 1.65”H

Dimensions: 8”D x 4”H

Lighting - Solar


50

The Solar Marine Light is an industrial strength, solar powered light designed for the harshest environments. This model is available in several colors for dock lighting and safety applications. A switch on the bottom allows you to choose between constant or flashing light. Great for dock lighting, marinas, boat houses, safety lighting, channel markers, buoys, obstruction lighting, mooring lights, and just about anywhere you may need a light!

Super bright LEDs and powerful solar panel provide all night illumination. Mounts virtually anywhere in minutes providing a fast and cost effective lighting solution. Easy hassle-free mounting, no wires, no mess, and no electrical cost!

Amber LED (Constant or Flash 1 sec.)Blue LED (Constant or Flash 1 sec.)Green LED (Constant or Flash 1 sec.)Red LED (Constant or Flash 1 sec.)White LED (Constant or Flash 1 sec.)

Des

crip

tionSolar-LL-SML-Amber

Solar-LL-SML-BlueSolar-LL-SML-GreenSolar-LL-SML-RedSolar-LL-SML-White

Item

#

10/20 Lumens24-36 Hr. Run Time

Changeable Battery

The Solar Pagoda Piling Light provides a clean, classic look. The louvered aluminum fixture comes in an attractive white powder-coated finish. A super bright LED illuminates the fixture, providing a soft, ambient glow that is not blinding at eye level. The patented magnet technology allows a quick change of LED intensity for adjustment to the five brightness settings. Optional amber LED is available for turtle-conscious lighting requirements.

The Solar Pagoda Piling Light has an advanced microprocessor control circuit monitoring every aspect of the light with protective features to prevent overcharging, over discharging, output control, and consistent brightness. Equipped with the industries latest LiFePo4 battery.

White Solar Pagoda Light - Amber LEDWhite Solar Pagoda Light - White LED

Des

crip

tionSolar-LL-PAG-W-A

Solar-LL-PAG-W-WItem

#

5-25 Lumens6-26 Hour Run Time

Changeable Battery

LED Lighting

Solar Pagoda Piling Light

Dimensions: 4.25”D x 4”H

Dimensions: 10”D x 9.5”H

LED Lighting

Solar Marine / Channel Marker Lights (1-Nautical Mile)

Lighting - Solar

51

The World’s First Solar Powered Silhouette Illuminating Buoys are the safest available. Not only can you see the buoy at night, you can actually read the message! This unit is equipped with new, patent pending magnet technology. Swipe the magnet over the solar panel at night to change between 7 brightness levels for user adjustable brightness and run times. Hold the magnet for 5 seconds, and you can change between white, blue, or amber illuminating LEDs! That’s right, a simple swipe and you can adjust the brightness, run time, and LED color!

The powerful solar panel collects the sun’s energy during the day. At night the integrated circuit automatically turns on the super bright LED which illuminates the entire body of the buoy. The labels create shadows of the message, logos, and bands, that allow boaters to visibly read the buoy’s message at night.

Choose from the many label options listed above.

Manufactured from rotationally molded polyethylene for uniform thickness makes this buoy virtually indestructible! Resistant to damage from most collisions or harsh environmental forces.

Highly visible reflective labels, bands, and symbols increase day and night visibility. Powerful 4 watt solar panel ensures all night run-times even on cloudy days.

Solar Powered Illuminating Buoys are a safer alternative to unlit traditional Buoys.

Marker Buoys

Sur-Mark™ Marker BuoysSur-Mark™ and Sur-Mark™ II regulatory buoys are molded from tough, UV protected polyethylene. These buoys feature one-piece seamless construction, internal concrete ballast, recessed galvanized eye, and flat bottom for upright storage. Color labels (sold separately, see below) fit both styles. Sur-Mark I and II buoys include orange marking tape. Chain and hardware not included. For solar warning / channel marker lights, see page 51.

49”61”49”49”

Hei

ghtMB-SM

MB-SM2MB-SMGMB-SMR

Item

# Sur-Mark II

Sur-Mark ISur-Mark IIGreenRedD

escr

ipti

on18”na18”18”La

rge

Ring 40

154040Bu

oyan

cy (l

bs)

Sur-Mark I

Red Sur-Mark Green Sur-Mark

61”

49”

49” 49”

No-Wake Marker Buoy

MB-CNA-NWIS

70”

Hei

ghtMB-CNA-

NWISItem

# No Wake / Idle Speed Marker BuoyD

escr

ipti

on16”

Larg

e Ri

ng 40

Buoy

ancy

(lbs

)70”

DockBuilders’ No Wake, Idle Speed marker buoy is a step above the rest. Our marker buoy is constructed using tough, UV protected, white polyethylene and is foam filled for positive buoyancy. Unlike other buoys on the market, ours comes complete with the No Wake, Idle Speed labels pre-installed on both sides and highly visibility reflective tape. It also features a concrete internal ballast, which keeps the buoy upright. A hot dipped galvanized eye bolt is included for easy attachment at the bottom. Measures 70” high with a column diameter of 8½”. Large round ring measures 16”. For solar warning / channel marker lights, see page 51.

•Faderesistant,self-adhesive,vinylmarker labels.•Brightlycoloredforhighvisibility.•Twolabelsrequiredperbuoy(soldin pairs).•Eachlabelis13”widex24”longtofit either Sur-Mark™ or Sur-Mark™II.•Alllabelsarewarranteedfor5yearsagainst weathering or fading.

Sur-Mark™ Buoy Labels

#MB-L-SNW #MB-L-S05M #MB-L-IS

#MB-L-SHA

#MB-L-SWA #MB-L-NS #MB-L-NB

#MB-L-KO#MB-L-HA

#MB-L-DR#MB-L-DKO#MB-L-D

Marker Buoys


52

The World’s First Solar Powered Silhouette Illuminating Buoys are the safest available. Not only can you see the buoy at night, you can actually read the message! This unit is equipped with new, patent pending magnet technology. Swipe the magnet over the solar panel at night to change between 7 brightness levels for user adjustable brightness and run times. Hold the magnet for 5 seconds, and you can change between white, blue, or amber illuminating LEDs! That’s right, a simple swipe and you can adjust the brightness, run time, and LED color!

The powerful solar panel collects the sun’s energy during the day. At night the integrated circuit automatically turns on the super bright LED which illuminates the entire body of the buoy. The labels create shadows of the message, logos, and bands, that allow boaters to visibly read the buoy’s message at night.

Choose from the many label options listed above.

Manufactured from rotationally molded polyethylene for uniform thickness makes this buoy virtually indestructible! Resistant to damage from most collisions or harsh environmental forces.

Highly visible reflective labels, bands, and symbols increase day and night visibility. Powerful 4 watt solar panel ensures all night run-times even on cloudy days.

Solar Powered Illuminating Buoys are a safer alternative to unlit traditional Buoys.

Solar Light Marker Buoy

Illuminated Marker Buoys

52”

Item

#

Labe

lSolar-LL-Buoy-BRSolar-LL-Buoy-BSSolar-LL-Buoy-CCSolar-LL-Buoy-DSolar-LL-Buoy-DASolar-LL-Buoy-DKOSolar-LL-Buoy-DRSolar-LL-Buoy-ECSolar-LL-Buoy-HASolar-LL-Buoy-ISSolar-LL-Buoy-ISNWSolar-LL-Buoy-ISSSolar-LL-Buoy-KOSolar-LL-Buoy-LASolar-LL-Buoy-MESolar-LL-Buoy-NBSolar-LL-Buoy-NFSolar-LL-Buoy-NSSolar-LL-Buoy-NWSolar-LL-Buoy-PWCASolar-LL-Buoy-RCSolar-LL-Buoy-S05MSolar-LL-Buoy-S10MSolar-LL-Buoy-SHASolar-LL-Buoy-SLSolar-LL-Buoy-SNWSolar-LL-Buoy-SWASolar-LL-Buoy-UCSolar-LL-Buoy-WC

Boat RampBoat SmartCenter ChannelDangerDive AreaDanger Keep OutDanger RocksExtreme CautionHazard AreaIdle SpeedIdle Speed No WakeIdle Speed (w/ Swim Icon)Keep OutLanding AreaMarina EntranceNo BoatsNo FishingNo SwimmingNo WatercraftPWC AreaRace CourseSlow 5 MPHSlow 10 MPHShallow AreaSave LivesSlow No WakeSwim AreaUse CautionWaterski Course

Illuminated Marker Buoys

53

Deep Glow’s Glow-to-Go 12 volt super bright green portable LED light is great for attracting bait and fish to your night fishing excursions. Built from the highest quality components, this light is designed to give you years of enjoyment without the worries of broken bulbs. Simply plug it in and throw it in the water. The Glow-to-Go features our exclusive floating cord, which will allow the light to float vertically, or you can attach a weight and sink it below the surface. Whether you own a sport-fishing yacht, bass boat, or a kayak, Deep Glow’s Glow-to-Go is lightweight and portable for your on-the-water experiences. The LED light can be plugged into a 12 Volt DC cigarette lighter for continuous use or attached to the optional 12 volt battery using alligator clips which will operate the light for up to 8 hours.

No other portable lighting systems compare to the extremely bright, durable, shock-proof design of the Glow-to-Go. With its amazingly bright green LED light, ease of use, and approximately 50,000 hour lifespan (1-year limited warranty), the Glow-to-Go is great for fishing or dock-side entertaining.

FL-DG-G2G-G30FL-DG-G2G-G40FL-DG-G2G-G50FL-DG-G2G-G60

FL-DG-G2G-BatFL-DG-G2G-Clips

Green Light w/30’ CordGreen Light w/40’ CordGreen Light w/50’ CordGreen Light w/60’ Cord

12 volt BatteryAlligator Clips

Des

crip

tion

Lighting - Underwater

High Intensity Underwater Dock LightDeep Glow Underwater Dock Lights were designed specifically to solve the problems caused by fragile designs of the past, some of which are still being sold today. Deep Glow’s patented design utilizes a tri-level protected metal halide bulb, a waterproof, weighted, custom-injection molded polycarbonate housing, and 1/4” thick glass dome. The heat generated by the bulb helps keep the glass free of marine growth. A 1-year limited warranty guarantees replacement or repair for any manufacturer’s defects at no additional cost. Deep Glow Lights are not only the toughest lights in the industry, they are brighter, easy to install, and well known for attracting fish.

FL-DG-HI-G30FL-DG-HI-G40FL-DG-HI-G50FL-DG-HI-G60FL-DG-HI-B30FL-DG-HI-B40FL-DG-HI-B50FL-DG-HI-B60Timer15112

Light Sensing Timeralso available:

Optional 12 voltPortable Battery

Item

# Green Light w/30’ CordGreen Light w/40’ CordGreen Light w/50’ CordGreen Light w/60’ CordBlue Light w/30’ CordBlue Light w/40’ CordBlue Light w/50’ CordBlue Light w/60’ CordLight Sensing Timer

Des

crip

tion

Item

#

DockBuilders’ Deluxe Fish Cleaning Station is an outstanding amenity for marinas, yacht clubs, private docks, and public piers.

Our Deluxe fish cleaning station combines sleek, aerodynamic styling with superior strength and durability. Designed for the discerning fishing enthusiast, our table features a solid ¾” thick King Starboard cutting top. Top mounting brackets allow you to adjust the tabletop pitch, allowing water, scales, blood, and other debris to run off the back of the table into the water.

Mounting hardware for wooden docks is included.

Dimensions: 26” Length

Dimensions: 9” x 7½”

LED Lighting

Glow-to-Go Underwater Fishing Light

Lighting - Underwater


54

Fish Cleaning Stations

Fish Station with Angled Legs Fish Station with Pedestal

Item# FishStation39-SPItem# FishStation39-4L

DockBuilders’ Deluxe Fish Cleaning Station is an outstanding amenity for marinas, yacht clubs, private docks, and public piers.

Our Deluxe fish cleaning station combines sleek, aerodynamic styling with superior strength and durability. Designed for the discerning fishing enthusiast, our table features a solid ¾” thick King Starboard cutting top. Top mounting brackets allow you to adjust the tabletop pitch, allowing water, scales, blood, and other debris to run off the back of the table into the water.

Mounting hardware for wooden docks is included.

The aluminum legs are welded at a sleek 5-degree angle, which not only makes for a stylish look, but also allows the back edge of the table to hang approximately 7” beyond the edge of the dock.

The single aluminum pedestal is offset toward the front, which not only makes for a sleeker look, but also allows the back edge of the table to hang approximately 4” beyond the edge of the dock.

•All 6061 T-6 marine-grade aluminum table.•Type 316 stainless steel hardware.•¾” thick King StarBoard cutting top.•Welded construction in all stress areas.•Space saving mounting over edge of dock.•Quick and easy installation.•Ships ready to install in 15 minutes.•Dimensions: 39” W x 19” D x 35½” H

Fish Cleaning Stations

55

Make Your Dock a Destination! The Dock Sides system increases the utility of your dock or deck by removing bulky accessories from the surface and organizing it along the perimeter, freeing valuable space for people and activities.

The 2-Part system consists of a receiver bracket bolted directly to the side of a wooden frame, and a series of related attachments that can eas-ily be secured to or removed from the receiver(s). Mounting your accessories to the side allows easy access for retrieval and storage. All hardware is hot-dipped galvanized steel unless noted other-wise.

Note: Use with floating docks will require adequate buoyancy and weight distribution balance to offset the additional load of Dock Sides accessories.

Items shown for use with wood frame docks. For other applications, please call us at 1.800.677.4710.

Dock Sides

The Slotted Receiver mounts to the underside of wood frame docks & decks and is secured in place by two thru-bolts and lag screws for wood frames (or four bolts for steel frames). This receiver provides a strong platform for mounting all the Dock Sides accessories, including the 5’ bench and up to 13’ side mount umbrellas.

Depending on load, reinforcements may be required.

Slotted Receiver

Item# DockSides-86920

Before After

Dock Sides


56

Dock Box Mount Brackets

Bench Chassis

The Dock Sides Bench Chassis enables you to create comfortable seating for your dock or deck without taking up valuable surface area. The angle of the seat back and the position of the arm rests were designed with human ergonomics in mind.

Bench materials sold separately.

O.E.C. (Cooler Stand)

The Dock Sides Outdoor Entertainment Center provides the perfect compliment for outdoor gatherings on your dock or deck. Bring the convenience of cold storage, cutting and serving space to all your outdoor activities. The Outdoor Entertainment Center provides a docking base for a 48 quart cooler (purchase separately). Two large side table working surfaces with four integrated beverage holders are included.

Cooler sold separately.

The Dock Box Mount Brackets provide a sturdy mounting platform for easily adding a storage box to your dock or deck without taking up any valuable surface area. The Dock Box Mount consists of two mounting arms which provide a universal mounting surface that will facilitate a variety of manufacturers’ dock and deck boxes.

Dock Box sold separately.

Rod Holder Mount

The Dock Sides Rod Holder Mount provides secure mounting for up to three fishing rod holders (purchased separately) on your dock. The rod holder support arm is pre-drilled with four industry standard holes with bolting dimensions of 1-5/16” x 3-3/16”.

Rod Holders sold separately.

[x2] Required

[x2] Required

[x1] Required

[x1] Required





Dock Sides

57

Dock Sides

Kayak Rack - Single

Kayak Rack - Vertical

The Dock Sides Vertical Kayak Rack makes mounting a pair of kayaks on your dock a snap. You also get a cost effective and sturdy mount without sacrificing any dock surface area. The Vertical Kayak Rack consists of four J-hook style brackets which are mounted on two tube uprights. You simply rest your kayak on its side in the J-hooks and secure it with straps..

Kayak Rack Horizontal

The Dock Sides Single Kayak Rack makes mounting a kayak on your dock a snap. You also get a cost effective and sturdy mount without sacrificing any dock surface area. The Single Kayak Rack attachment consists of two J-hook style brackets which are easily fastened onto the Accessory Rack Base, transforming it into a convenient dock side storage rack for your kayak. You simply rest your kayak on its side in the J-hooks, and secure it with two securing straps..

This Horizontal Kayak Rack provides a sturdy mounting platform for storing two kayaks beside your dock. The Horizontal Kayak Rack consists of two mounting arms which provide a universal mounting surface to facilitate easy loading and unloading of kayaks. Simple to install, the rack offers convenient storage without inhibiting any dockside views. Securing straps hold kayaks firmly in place.

[x2] Required

[x2] Required [x2] Required

Canoe Rack

The Canoe Rack provides a sturdy platform for storing a single canoe (purchase separately) beside your dock or deck without taking up any valuable surface area. The Canoe Rack consists of two mounting arms which provide a universal mounting surface that will facilitate easy loading, unloading, and storage of your canoe. Securing straps hold the canoe firmly in place.

[x2] Required


Item# DockSides-86923Item# DockSides-86922


Dock Sides


58

Stand Up Paddle Board Brackets

Stand up paddle board brackets provide a secure and convenient storage place for a single board. Brackets are to be used with existing Dock Sides kayak rack. Includes two SUP brackets and hardware.

Universal Mounting Base

The Dock Sides Stand attachment provides a sturdy mounting platform for easily adding an umbrella or solar shower to your dock or deck without taking up any valuable surface area.

Please visit DockBuilders.com for up to date details on compatible umbrellas and solar showers.

Stand Up Paddle Board Rack

Stand up paddle board rack makes mounting a paddle board on your dock a snap. You also get a cost effective and sturdy mount without sacrificing any dock surface area. The Stand up Paddleboard Rack attachment consists of two J-hook style brackets which fasten onto the Accessory Rack Base, transforming it into a convenient dock side storage rack for your paddle board. You simply rest your paddle board on its side in the J-hooks and secure it with two securing straps.

[x2] Required


[x1] Required

Item# DockSides-86937Item# DockSides-86938

Compatible with the following:

- Mounting for all Wanda offset (side post) umbrellas

- Milano (UM530P, UM533P, UM538P, UM548P, UM630P, UM633P, UM643P, UM638P, UM648P, UM833P)

- Portofino (UP320X, UP323X, UP330X, UP330P, UP333X, UP333P, UP338P)

- Sorrento (US220X, US223X,US230X)

- Roma (UR430X, UR430P)

- Baja (UB130X)

- Mounting for Game Solar Shower

Offset Umbrella

Outdoor Solar Shower

Required

For use with Single or Vertical Kayak Racks or other mounting surface (sold separately).

Dock Sides

59

Nautical, Handcrafted, Aluminum Hose Holders or Address Plaques give your home or dock color and style. Our hose holders and address plaques are made from cast alumi-num and are available in full-color, patina (antique) or pewter finish. Each full-color piece is airbrushed by hand, making each one unique. Hose holders can accommodate a 50-75’ hose. Mount to wood using two 5/16” x 2” stainless steel lag bolts.

Each address plaque comes with a set of 3” tall self-adhesive durable vinyl numbers for you to apply your house number.

Nautical Accessories

Pewter FinishPatina FinishFull-Color Finish

Available in Full-Color, Patina, or Pewter Finish.

Nautical Hose Holders Nautical Address Plaques



60

Nautical, Handcrafted, Aluminum Hose Holders or Address Plaques give your home or dock color and style. Our hose holders and address plaques are made from cast alumi-num and are available in full-color, patina (antique) or pewter finish. Each full-color piece is airbrushed by hand, making each one unique. Hose holders can accommodate a 50-75’ hose. Mount to wood using two 5/16” x 2” stainless steel lag bolts.

Each address plaque comes with a set of 3” tall self-adhesive durable vinyl numbers for you to apply your house number.

Bass

Marlin Scene Tuna Marlin

TroutSailfish

Address Plaque - Item# AP-1000 Address Plaque - Item# AP-1100 Address Plaque - Item# AP-1200

Hose Holder - Item# HH-1000 Hose Holder - Item# HH-1100 Hose Holder - Item# HH-1200



Available in full color, patina, or pewter finish, see page 60. Available in full color, patina, or pewter finish, see page 60. Available in full color, patina, or pewter finish, see page 60.


12¼”W x 12”H 115/8”W x 13½”H 115/8”W x 13¾”H

12¼”W x 8¼”H 10¼”W x 10”H 10¼”W x 9¾”H

13”W x 133/8”H 141/8”W x 9½”H 13¼”W x 12½”H

13”W x 9½”H 13¾”W x 63/8”H 13¼”W x 8¾”H


61

Mahi-Mahi (Dolphinfish)

Snook Tarpon Manatee

Palm TreePalm Scene

Address Plaque - Item# AP-5000



Hose Holder - Item# HH-5000 Hose Holder - Item# HH-6000

Address Plaque - Item# AP-7000 Address Plaque - Item# AP-8000





13½”W x 9½”H 11½”W x 9½”H

11½”W x 117/8”H 10”W x 10”H

13½”W x 133/8”H

13½”W x 17½”H

12”W x 133/8”H

115/8”W x 15¾”H 115/8”W x 137/8”H

115/8”W x 15¼”H



62

Porpoise

Turtle Lighthouse Pelican

3-Jumping DolphinsHeron






Hose Holder - Item# AP-9300


Available in full color, patina, or pewter finish, see page 60. Available in full color, patina, or pewter finish, see page 60.

115/8”W x 11½”H 165/8”W x 9¾”H

11½”W x 7¼”H 8¼”W x 11¾”H 12¾”W x 9”H

13¼”W x 20¾”H

14½”W x 16¼”H 16¼”W x 11½”H

121/8”W x 14”H 11¼”W x 17”H 125/8”W x 13”H

Available in full color, patina, or pewter finish, see page 60.


63

Hose Holder W/ FaucetStandard Hose HolderFlamingo


Item# HH-Bib-White

Aluminum Hose Holder - Item# HH-L-Alum

White Hose Holder - Item# HH-L-White

Available in full color, patina, or pewter finish, see page 60.

115/8”W x 20”H

Holds 50’-75’ Hose



Neatly stores your hose near the water bib for easy access. Crafted of cast aluminum, then powder coated.

Shown in white*Also available in black, bronze, rust, and patina finishes, see page 44.


Our 36” tall water stanchions can be custom ordered with any of our nautical hose holders, which can be found on pages 60-64. In addition, there are five available finish options for the water stanchion (see page 44) and three finish options for each our hose holders (see page 60). Please call to order.

Nautical Water Stanchions



64

Water Stanchion DoubleWater Stanchion SingleOutdoor Shower

Item# WS-IDP-S Item# WS-IDP-D

Water Stanchion DoubleWater Stanchion Single

Item# OS-B-White Item# WS-BC-03-S-White Item# WS-BC-03-D-White

Revive and refresh your guests by adding our stylish outdoor shower to your dock or pool deck. Our shower is easily activated using a chain/lever mechanism. The all-aluminum shower post stands just over 7’ tall and boasts a solid cast aluminum base that allows for easy mounting to your dock or pool deck. An optional water bib and hose holder facilitates washing and cleaning of equipment and boats.

Standard Height: 7’-2”Post: 4” x 4”Base Plate: 8” x 8”

Base model shown in white without hose bib and hose holder.

*Also available in black, bronze, rust, and patina finishes, see page 44.

Dock Utilities

Extruded, marine-grade aluminum stanchion withcast-aluminum hose holder and single water connection. Powder coated white exterior.

Standard Height: 28½”Post: 3” x 3”Base Plate: 6” x 6”Holds up to a 50’ hose

Extruded, marine-grade aluminum stanchion withtwo cast-aluminum hose holders and two water connections. Powder coated white exterior.

Standard Height: 28½”Post: 3” x 5”Base Plate: 6” x 6” Holds up to two 50’ hoses

Extruded, marine-grade aluminum stanchion with cast-aluminum hose holder and single water connection. Powder coated white* exterior.

Standard Height: 36”Post: 4”x4”Base Plate: 8” x 8”Holds up to a 75’ hose


Also available with nautical hose holder design, see page 64.

Extruded, marine-grade aluminum stanchion with two cast-aluminum hose holders and two water connections. Powder coated white* exterior.

Standard Height: 36”Post: 4”x4”Base Plate: 8” x 8”Holds up to two 75’ hoses


Also available with nautical hose holder design, see page 64.

For finish options, see page 44. For finish options, see page 44.


Available Options:• Hose Bib• Hose Holder

86”

28½” 28½”

36” 36”

Dock Utilities

65

Dock Boxes

Standard Dock Box

Item# DB-BW-323

Outside Dimensions: 39½” x 19¾” x 21½”Inside Dimensions: 35” x 14½” x 18”

Standard Dock Box

Item# DB-BW-324

Outside Dimensions: 33” x 24” x 18”Inside Dimensions: 27½” x 20” x 14½”

Standard Dock Box

Item# DB-BW-424-Hasp

Outside Dimensions: 53” x 25” x 24”Inside Dimensions: 49½” x 22½” x 21”

Standard Dock Box

Item# DB-BW-424-Handle

Outside Dimensions: 53” x 25” x 24”Inside Dimensions: 49½” x 22½” x 21”

Dock Boxes are our specialty at Dock Builders Supply. All of our dock boxes are constructed from heavy duty white fiberglass with an average 3/16” wall thickness. The lids are constructed with a strong, sandwich-core design for unsurpassed strength. Most of our standard dock boxes come standard with lockable, stainless steel latches, secured with oversized, rustproof rivets. In addition, gas shocks are included on our LS1 model and on all numerical models ending in 426 or higher, except for the model 636. All boxes feature stainless steel piano hinges that are attached with adhesive and oversized rustproof rivets. The UV gel coated exterior provides long-lasting beauty and protection.

Dock Boxes


66

Standard Dock Box Standard Dock Box

Item# DB-BW-700

Outside Dimensions: 72” x 26½” x 27½”Inside Dimensions: 66” x 20½” x 23½”

Standard Dock Box

Item# DB-BW-725

Outside Dimensions: 85” x 22” x 24½”Inside Dimensions: 79” x 17¼” x 22½”

Fishing Rod Box (w/ rod holders)

Item# DB-BW-825

Outside Dimensions: 96” x 22” x 24¼”Inside Dimensions: 92” x 17¼” x 22½”

Standard Dock Box

Item# DB-BW-426

Outside Dimensions: 44¼” x 26¼” x 27½”Inside Dimensions: 38½” x 20” x 23½”

Standard Dock Box

Item# DB-BW-636

Outside Dimensions: 74” x 38” x 36”Inside Dimensions: 70” x 35” x 34”

Holds up to three 7’ long fishing rods.

Item# DB-BW-625

Outside Dimensions: 71” x 22” x 24¼”Inside Dimensions: 66” x 17½” x 20”

Dock Boxes

67

Dome Dock Box Small Boat Dock Box

Item# DB-BW-211

Outside Dimensions: 25” x 16½” x 10½”Inside Dimensions: 21½” x 13” x 9½”

Item# DB-BW-551

Outside Dimensions: 51” x 35½” x 31½”Inside Dimensions: 45” x 33” x 30”

Dock Box 125 Sail

Item# DB-BW-125


Dock Box LSF

Item# DB-BW-LSF

Outside Dimensions: 66” x 24” x 19”

Upright Locker Dock Box

Item# DB-BW-79V

Outside Dimensions: 23” x 19½” x 79½”Inside Dimensions: 22” x 19” x 75”

Designed for storage of a horizontal sail mast

Dock Boxes


68

Triangle Dock Box

Item# DB-BW-431


Triangle Dock Box

Item# DB-BW-432


Waterside Lounger (Loveseat)

Item# DB-BW-LS1


Triangle Dock Box

Item# DB-BW-430

Outside Dimensions: 54½” x 34¼” x 29½”Inside Dimensions: 48” x 26” x 25”

Seat-Top Dock Box Seat-Top Dock Box

Item# DB-BW-600

Outside Dimensions: 72” x 29” x 29”Inside Dimensions: 67” x 25½” x 20”

Item# DB-BW-500

Outside Dimensions: 50” x 29” x 29”Inside Dimensions: 46½” x 24½” x 26½”

Designed for Newport Harbor Power Unit, see page 40.10-1/8”W 6-1/4”D 26-3/8”H

Dock Boxes

69

Low Profile Dock Box

Item# DB-BW-618



Item# DB-BW-718



Item# DB-BW-418

Outside Dimensions: 48” x 20” x 18”Inside Dimensions: 41½” x 15” x 15”


Item# DB-BW-518


Trash Receptacle Trash Receptacle

Item# DB-BW-TR2


Item# DB-BW-TR1

Outside Dimensions: 23½” x 20” x 29½”Inside Dimensions: 23” x 19” x 29”

Convenient front door for easy extraction of trash.

Holds up to a 20 gallon liner Holds up to a 40 gallon liner

ThruFlow™ is a premium decking system that is ideal for docks, decks, walkways, and virtually any outdoor structure. ThruFlow’s™ uniquely designed, reinforced polypropylene decking panels allow water, debris, and sunlight to pass through the decking, keeping your walking surface clean. Sunlight and water penetration through the decking work in concert to help keep vegetation alive underneath your dock, minimizing the impact to the environment. The 360° non-slip surface helps keep you sure-footed and upright. ThruFlow’s™ design also helps to minimize storm damage from wind and surge effects.

The attractive design and color options of ThruFlow™, coupled with the best in UV protection available, ensure you will continue to be pleased with the clean look of your walking surface for years to come.

Dock Boxes


70

Decking

ThruFlow™ is a premium decking system that is ideal for docks, decks, walkways, and virtually any outdoor structure. ThruFlow’s™ uniquely designed, reinforced polypropylene decking panels allow water, debris, and sunlight to pass through the decking, keeping your walking surface clean. Sunlight and water penetration through the decking work in concert to help keep vegetation alive underneath your dock, minimizing the impact to the environment. The 360° non-slip surface helps keep you sure-footed and upright. ThruFlow’s™ design also helps to minimize storm damage from wind and surge effects.

The attractive design and color options of ThruFlow™, coupled with the best in UV protection available, ensure you will continue to be pleased with the clean look of your walking surface for years to come.

ThruFlow 48” x 48” Panel

ThruFlow 12” x 48” PanelThruFlow 12” x 36” Panel

12” x 36” Panel Light Grey12” x 36” Panel Maple12” x 36” Panel Seafoam

Des

c.TF-1236GTF-1236MTF-1236S

Item

# 12” x 48” Panel Light Grey12” x 48” Panel Maple12” x 48” Panel Seafoam

Des

c.TF-1248GTF-1248MTF-1248S

Item

#


Des

c.TF-4848GTF-4848MTF-4848S

Item

#

ThruFlow 12” x 60” Panel


Des

c.TF-1260GTF-1260MTF-1260S

Item

#

Truss Head Type 305 Stainless Steel Screw

(#10 x 2½" #2 Square) Item# S-2.5THSS305

Fasteners for ThruFlow Decking:

Decking

71

Wood Sealer

WOOD Rx Ultra utilizes proprietary technology to provide sheer protection for a more natural look. WoodRx Ultra employs a superfine particle size that offers increased penetration for improved water repellency and more uniform wear. Wood Rx Ultra spreads effortlessly and evenly, resisting the lapping characteristics inherent in most transparent wood sealers. Wood RX Ultra is recommended for all climates and wood surfaces. With no toxic ingredients, and a VOC of less than 50 g/l, it is one of the most environmentally friendly products on the market. Product may be applied with a pump sprayer and cleaned up using only soap and water.

Wood Rx Original

Wood Rx Ultra

WOOD Rx Original formulation is a technologically advanced water-based finish that effectively penetrates, seals and protects exterior wood surfaces. Its 100% acrylic formulation provides superior flexibility and adhesion. It allows wood surfaces to breathe, protects against water and moisture penetration, provides maximum protection against mildew and algae growth, and contains powerful UV screeners which filter out the sun’s harmful rays. In addition, WOOD Rx is environmentally friendly which is an increasing concern in today’s marketplace. Wood RX original formulation is only recommended for tropical climates that do not experience freeze/thaw conditions.

1 Gal. Natural - Ultra2 Gal. Natural - Ultra Sprayer5 Gal. Natural - Ultra1 Gal. Custom Color - Ultra5 Gal. Custom Color - Ultra

Des

crip

tionWoodRx-U-N1

WoodRx-U-N2SWoodRx-U-N5 WoodRx-U-SO1 WoodRx-U-SO5

Item

#

Classic Natural Cedar Teak Walnut

Mahogany Sienna Redwood Tawny Cypress Chestnut

Note: Wood RX Colors shown are approximate and may vary. For additional custom colors, see our website.

Most Popular

Natural Ultra Finish Shown

Natural Finish Shown

Visit dockbuilders.com for application instructions, coverage information, and custom color options.

1 Gal. Natural - Original5 Gal. Natural - Original1 Gal. Custom Color - Orig.5 Gal. Custom Color - Orig.1 Gal. Clear Water Repellent2 Gal. Clear (Pump Sprayer)5 Gal. Clear Water Repellent

Des

crip

tionWoodRx-N1

WoodRx-N5WoodRx-O-SO1 WoodRx-O-SO5WoodRx-Cle1WoodRx-Cle2SWoodRx-Cle5

Item

#

Wood Sealer


72

FloodPro® Spa-N-Deck Base Coat and Spa-N-Deck 100% Acrylic Finish are premium quality coatings for wood decks, docks, and siding. Spa-N-Deck Base Coat is the first step with FloodPro Spa-N-Deck 100% Acrylic Wood Finish.

Base Coat penetrates deeply into the wood’s pores, delivering superior adhesion and moisture protection and ensuring maximum life and peel resistance of Spa-N-Deck 100% Acrylic Finish.

Together, they provide unsurpassed appearance and protection from the most severe ultra-violet environments. Spa-N-Deck 100% Acrylic Wood Finish System bonds “in” and “on” the wood, providing a tough, durable, lustrous finish that enhances the natural character of the wood.

Spa-N-Deck Acrylic Finish

Spa-N-Deck Base Coat

5 Gal. Base Coat

Des

crip

tionSpa-N-Deck-B5

Item

#

Des

crip

tion

Item

# Spa-N-Deck-NH5 Spa-N-Deck-N5Spa-N-Deck-C5Spa-N-Deck-S5Spa-N-Deck-R5Spa-N-Deck-CH5

5 Gal. Natural-Honey5 Gal. Natural5 Gal. Cedar5 Gal. Sedona5 Gal. Redwood5 Gal. Chestnut

Note: Spa-N-Deck Colors shown are approximate and may vary.

Natural Honey Cedar Redwood

Natural Chestnut Sedona

Most Popular

Natural Honey Finish Shown

Visit dockbuilders.com for application instructions and coverage information.

Natural Honey Finish Shown

Wood Sealer

73

Seawall Products

HDG Plate Washers & Hex Nuts

TerraTex HD Filter Fabric

6¼’ wide (By The Linear Foot)8¾’ wide (By The Linear Foot)12½’ wide (By The Linear Foot)6¼’ wide x 360’ long roll8¾’ wide x 258’ long roll12½’ wide x 360’ long roll17½’ wide x 258’ long roll

Des

crip

tionFF-06

FF-09FF-12FF-06360FF-09250FF-12360FF-18250

Item

#

HDG Tieback Rods

½” x 6’ (6” Thread both ends)½” x 6’ x 6” (6” Thread + Hook)5/8” x 10’ (6” Thread both ends)5/8” x 10’ x 6” (6” Thread + Hook)5/8” x 12’ (6” Thread both ends)5/8” x 12’ x 6” (6” Thread + Hook)3/4” x 12’ (6” Thread both ends)3/4” x 12’ x 6” (6” Thread + Hook)3/4” x 15’ (6” Thread both ends)3/4” x 15’ x 6” (6” Thread + Hook)1” x 10’ (6” Thread both ends)1” x 12’ (6” Thread both ends)1” x 15’ (6” Thread both ends)

Des

crip

tionTR-.500-072

TR-.500-072HTR-.625-120TR-.625-120HTR-.625-144TR-.625-144HTR-.750-144TR-.750-144HTR-.750-180TR-.750-180HTR-1.000-120TR-1.000-144TR-1.000-180

Item

#

TerraTex HD is a non-biodegradable, woven geotextile, made up of polypropylene fibers. It is a high-strength, robust fabric, engineered for stabilization applications in more severe soil conditions.

TerraTex HD is recommended for use beneath rip-rap and interlocking concrete blocks. It can also be used behind seawalls in areas with sandy soils. If you reside in an area with clay or other non-porous soils, please contact our knowledgeable sales staff for alternative fabrics that will better suit your needs.

Des

crip

tion

Item

# 2” x 2” x 1/8”2¼” x 2¼” x 3/16”2¼” x 2¼” x 3/16”3” x 3” x 1/4”3” x 3” x 1/4”3” x 3” x 1/4”3” x 3” x 1/4”3” x 3” x 1/4”6” x 6” x 1/4”6” x 6” x 1/4”6” x 6” x 1/4”6” x 6” x 1/2”1/2” Hex Nut HDG5/8” Hex Nut HDG3/4” Hex Nut HDG1” Hex Nut HDG

W-2212W-2258W-2258CW-3358W-3358CW-3334W-3334CW-33-1.0W-66-.25-.625W-66-.25-.750W-66-.25-1.00W-66-.50-1.00HN-12HN-58HN-34HN-1.0

Tieback rods are hot dipped galvanized horizontal rods that are used to reinforce retaining walls and sea walls. One end of the rod gets secured to the wall and the other gets anchored to a stable structure, such as a concrete deadman, that is anchored beneath the ground with sufficient resistance.

The tieback/deadman system resists forces, such as backfilled soils plus rainwater, that would otherwise cause the wall to lean. Always consult an engineer to be certain the tie rods you select are appropriately sized for your project.

Square w/ 9/16” Hole (for 1/2” Tieback)Square w/ 11/16” Hole (for 5/8” Tieback)Curved w/ 11/16” Hole (for 5/8” Tieback)Square w/ 11/16” Hole (for 5/8” Tieback)Curved w/ 11/16” Hole (for 5/8” Tieback)Square w/ 13/16” Hole (for 3/4” Tieback)Curved w/ 13/16” Hole (for 3/4” Tieback)Square w/ 11/16” Hole (for 1” Tieback)Square w/ 11/16” Hole (for 5/8” Tieback)Square w/ 13/16” Hole (for 3/4” Tieback)Square w/ 11/16” Hole (for 1” Tieback)Square w/ 11/16” Hole (for 1” Tieback)

The threaded ends of our tieback rods are

manufactured with rolled threads as opposed to cut

threads. This process allows us to utilize a slightly smaller body

diameter rods offering greater cost savings over cut thread rods.

½”½”5/8”5/8”5/8”5/8”3/4”3/4”3/4”3/4”1”1”1”

Thre

ad D

iam

eter 0.445”

0.445”0.562”0.562”0.562”0.562”0.680”0.680”0.680”0.680”0.912”0.912”0.912”

Rod

Dia

met

er

Seawall Products


74

Galvanized Fasteners

Nuts & Washers HDGHex Lag Bolt HDG

Hex Bolt HDG Carriage Bolt HDG Common Nails HDG

Des

crip

tion

Item

# CB-12015CB-1203CB-1204CB-12045CB-1205CB-1206CB-1207CB-1208CB-1210CB-1212CB-1214CB-1216

CB-5810CB-5812CB-5814

CB-3412CB-3414

½” x 1½” w/ Full Thread½” x 3” w/ Full Thread½” x 4” w/ Full Thread½” x 4½” w/ Full Thread½” x 5” w/ Full Thread½” x 6” w/ Full Thread½” x 7” w/ 6” Thread½” x 8” w/ 6” Thread½” x 10” w/ 6” Thread½” x 12” w/ 6” Thread½” x 14” w/ 6” Thread½” x 16” w/ 6” Thread

5/8” x 10” w/ 6” Thread5/8” x 12” w/ 6” Thread5/8” x 14” w/ 6” Thread

3/4” x 12” w/ 6” Thread3/4” x 14” w/ 6” Thread

Des

crip

tion

Item

# N-16DGC-05N-16DGC-25N-16DGC-50

N-20DGC-05N-20DGC-25N-20DGC-50



16d 3½” long 5 lbs16d 3½” long 25 lbs16d 3½” long 50 lbs

20d 4” long 5 lbs20d 4” long 25 lbs20d 4” long 50 lbs

30d 4½” long 5 lbs30d 4½” long 25 lbs30d 4½” long 50 lbs

60d 6” long 5 lbs60d 6” long 25 lbs60d 6” long 50 lbs

Des

crip

tion

Item

# LB-1403LB-1405

LB-51604

LB-38025LB-3803LB-3804LB-3805LB-3806LB-3808

LB-1203LB-1204LB-1205LB-1206LB-1208

LB-5804LB-5806LB-5808

1/4” x 3”1/4” x 5”

5/16” x 4”

3/8” x 2½”3/8” x 3”3/8” x 4”3/8” x 5”3/8” x 6”3/8” x 8”

1/2” x 3”1/2” x 4”1/2” x 5”1/2” x 6”1/2” x 8”

5/8” x 4”5/8” x 6”5/8” x 8”

HB-38025HB-3803TB-38045HB-38055TB-3806

HB-1203HB-12035HB-1204HB-12045HB-1205HB-1206HB-1208HB-1210HB-1212HB-1214HB-1216

HB-58025HB-5803HB-58045HB-5808HB-5810HB-5812HB-5814HB-5816HB-5818HB-5820HB-5822HB-5824

HB-34035HB-3404HB-34055HB-3406HB-3410HB-3412HB-3414HB-3416HB-3418

Des

crip

tion

Item

# 3/8” x 2½” w/ 1” Thread3/8” x 3” w/ 1” Thread3/8” x 4½” w/ Full Thread3/8” x 5½” w/ 1” Thread3/8” x 6” w/ Full Thread

½” x 3” w/ 1¼” Thread½” x 3½” w/ 1¼” Thread½” x 4” w/ 1¼” Thread½” x 4½” w/ 1¼” Thread½” x 5” w/ 1¼” Thread½” x 6” w/ 1¼” Thread½” x 8” w/ 6” Thread½” x 10” w/ 6” Thread½” x 12” w/ 6” Thread½” x 14” w/ 6” Thread½” x 16” w/ 6” Thread

5/8” x 2½” w/ 1½” Thread5/8” x 3” w/ 1½” Thread5/8” x 4½” w/ 1½” Thread5/8” x 8” w/ 6” Thread5/8” x 10” w/ 6” Thread5/8” x 12” w/ 6” Thread5/8” x 14” w/ 6” Thread5/8” x 16” w/ 6” Thread5/8” x 18” w/ 6” Thread5/8” x 20” w/ 6” Thread5/8” x 22” w/ 6” Thread5/8” x 24” w/ 6” Thread

3/4” x 3½” w/ 2” Thread3/4” x 4” w/ 2” Thread3/4” x 5½” w/ 2” Thread3/4” x 6” w/ Full Thread3/4” x 10” w/ 6” Thread 3/4” x 12” w/ 6” Thread3/4” x 14” w/ 6” Thread 3/4” x 16” w/ 6” Thread 3/4” x 18” w/ 6” Thread

Des

crip

tion

Item

# HN-14HN-516HN-38HN-12HN-58HN-34HN-1.0

W-14W-516W-38W-38GFW-12W-58W-34W-34LW-1.0

1/4” Hex Nut5/16” Hex Nut3/8” Hex Nut1/2” Hex Nut5/8” Hex Nut3/4” Hex Nut1” Hex Nut

1/4” Round Flat Washer5/16” Round Flat Washer3/8” Round Flat Washer3/8” x 1½” Fender Washer1/2” Round Flat Washer5/8” Round Flat Washer3/4” Round Flat Washer3/4” Lock Washer1” Round Flat Washer

Galvanized Fasteners

75

Stainless Steel Fasteners

Nuts & Washers SS Type 304Hex Lag SS Type 304

Hex Bolt SS Type 304 Carriage Bolt SS Type 304Type 304, 305 and 316 stainless steels are nickel/chromium, austenitic grades of stainless steel and are inherently non-magnetic. Type 304 and 305 provide more than adequate corrosion protection in most commonly encountered applications.

Type 316 contains slightly more nickel than 304 and 2-3% molybdenum giving it better resistance to corrosion than 304, especially in chloride environments that tend to cause pitting. It offers superior performance when exposed to sea water and resists corrosion from sulfuric acid compounds.

Ring Strip Nails SS Type 304

Des

crip

tion

Item

# N-SSRingStrips3.25x.120 Type 304 SS Full Round Head Strip Nails 3¼” x .120 (4,000 per box)

Driver Bits

Des

crip

tion

Item

# Driver-#2PH2 Driver-#2SQ2

#2 x 2” Phillips Bit#2 x 2” Square Bit

Fits most tools with 22° angle

Des

crip

tion

Item

# W-516 x1.5SSFW-38SSW-38SSFW-38SSLW-12SSW-12SSLW-58SS

HN-38SSHN-38SSLHN-12SSHN-12SSLHN-58SSHN-58SSLHN-34SS

5/16” x 1½” Fender Washer3/8” Round Flat Washers3/8” x 1½” Fender Washers3/8” Lock Washers1/2” Round Flat Washers1/2” Lock Washers5/8” Round Flat Washers

3/8” Hex Nut3/8” Nylon Lock Nut1/2” Hex Nut1/2” Nylon Lock Nut5/8” Hex Nut5/8” Nylon Lock Nut3/4” Hex Nut

Des

crip

tion

Item

# CB-1203SSCB-12045SSCB-1208SSCB-1210SSCB-1212SS

CB-5810SSCB-5812SSCB-5814SS

1/2” x 3” w/ Full Thread 1/2” x 4½” w/ Full Thread1/2” x 8” w/ 6” Thread1/2” x 10” w/ 6” Thread1/2” x 12” w/ 6” Thread

5/8” x 10” w/ 6” Thread5/8” x 12” w/ 6” Thread5/8” x 14” w/ 6” Thread

Des

crip

tion

Item

# TB-3803SS TB-3804SSTB-3805SS

TB-1203SSTB-1204SSTB-1205SSTB-1206SSHB-1210SSHB-1212SSHB-1214SS

HB-5810SSHB-5812SSHB-5814SSHB-5816SS

3/8” x 3” w/ Full Thread Type 304 3/8” x 4” w/ Full Thread Type 3043/8” x 5” w/ Full Thread Type 304

1/2” x 3” w/ Full Thread Type 3041/2” x 4” w/ Full Thread Type 3041/2” x 5” w/ Full Thread Type 3041/2” x 6” w/ 6” Thread Type 3041/2” x 10” w/ 6” Thread Type 3041/2” x 12” w/ 6” Thread Type 3041/2” x 14” w/ 6” Thread Type 304

5/8” x 10” w/ 6” Thread Type 3045/8” x 12” w/ 6” Thread Type 3045/8” x 14” w/ 6” Thread Type 3045/8” x 16” w/ 6” Thread Type 304

Des

crip

tion

Item

# LB-516015SSLB-51602SSLB-51604SS

LB-38025SSLB-3803SSLB-3804SSLB-3806SS

LB-1203SSLB-1204SSLB-1205SSLB-1206SS

5/16” x 1½”5/16” x 2”5/16” x 4”

3/8” x 2½”3/8” x 3”3/8” x 4”3/8” x 6”

1/2” x 3”1/2” x 4”1/2” x 5”1/2” x 6”



76

Decking Screws SS Type 305 Decking Screws SS Type 316

Des

crip

tion

Item

# S-2.5SS316-0100S-2.5SS316-0500S-2.5SS316-1000S-2.5SS316-1500

S-3SS316-0100S-3SS316-0500S-3SS316-1000S-3SS316-1500

#10 x 2½” 100ct.#10 x 2½” 500ct.#10 x 2½” 1000ct.#10 x 2½” 1500ct.

#10 x 3” 100ct.#10 x 3” 500ct.#10 x 3” 1000ct.#10 x 3” 1500ct.

Ring Shank Nails SS Type 316Ring Shank Nails SS Type 304

Des

crip

tion

Item

# N-08DSS316R-01N-08DSS316R-05N-08DSS316R-25

N-10DSS316R-01N-10DSS316R-05N-10DSS316R-25




Des

crip

tion

Item

# N-08DSS304R-01N-08DSS304R-05N-08DSS304R-25





N-60DSS304R-25

8d 2½” long 1 lb8d 2½” long 5 lbs8d 2½” long 25 lbs

10d 3” long 1 lb10d 3” long 5 lbs10d 3” long 25 lbs

12d 3¼” long 1 lb12d 3¼” long 5 lbs12d 3¼” long 25 lbs



60d 6” long 25 lbs



12d 3¼” long 1 lb12d 3¼” long 5 lbs12d 3¼” long 25 lbs



Composite Screws SS Type 305

Des

crip

tion

Item

# S-2.5SS305C-0100S-2.5SS305C-0500S-2.5SS305C-1000S-2.5SS305C-2000

S-3SS305C-0100S-3SS305C-0500S-3SS305C-1000

#10 x 2½” 100ct.#10 x 2½” 500ct.#10 x 2½” 1000ct.#10 x 2½” 2000ct.

#10 x 3” 100ct.#10 x 3” 500ct.#10 x 3” 1000ct.

Roofing Nails SS Type 304

Des

crip

tion

Item

# N-03DSS304-01N-03DSS304-05N-03DSS304-25

N-04DSS304-01N-04DSS304-05N-04DSS304-25

1¼” long 1 lb1¼” long 5 lbs1¼” long 25 lbs

1½” long 1 lb1½” long 5 lbs1½” long 25 lbs

Hand-Drive Composite Decking Screws• Unique thread form removes exhaust while

driving to prevent “mushrooming” of compos-ite decking

• Type 17 point for fast starts• #2 square drive helps prevent stripping in

recess• Small .344 head diameter is less visible

Roofing Nails SS Type 316

Des

crip

tion

Item

# N-03DSS316-01N-03DSS316-05N-03DSS316-25

N-04DSS316-01N-04DSS316-05N-04DSS316-25

1¼” long 1 lb1¼” long 5 lbs1¼” long 25 lbs

1½” long 1 lb1½” long 5 lbs1½” long 25 lbs

Des

crip

tion

Item

# S-1.25SS305-0025S-1.25SS305-0100

S-2.5SS305-0100S-2.5SS305-0500S-2.5SS305-1000S-2.5SS305-1500

S-3SS305-0100S-3SS305-0500S-3SS305-1000S-3SS305-1500

#10 x 1¼” 100ct.#10 x 1¼” 500ct.

#10 x 2½” 100ct.#10 x 2½” 500ct.#10 x 2½” 1000ct.#10 x 2½” 1500ct.

#10 x 3” 100ct.#10 x 3” 500ct.#10 x 3” 1000ct.#10 x 3” 1500ct. (#10 x 2½" #2 Square) Item# S-2.5THSS305

Truss Head Screw SS Type 305


77

Tools

Stainless Steel Wood Screws

Stainless Steel Ejector Screws Grey Ceramic Wood Screws Grey Ceramic Composite Screws

Stainless Steel Trim Head ScrewsStainless Steel Composite Screws

#10 x 2½” Type 305 1800ct.#10 x 2½” Type 316 1800ct.#10 x 3” Type 305 900ct.#10 x 3” Type 316 900ct.D

escr

ipti

onM-CS0212SLPM-CS0212SLP-316M-CS0300SEPM-CS0300SEP-316

Item

#

Recommended for installing pressure-treated wood decking (CCA or ACQ) and high-acetic woods such as redwood and cedar. Good for both fresh and salt water environments. Type 17 point.Use with Muro M-SQR27114 driver bit

#10 x 2½” Type 305 900ct.#10 x 3” Type 305 900ct.

Des

crip

tionM-TX0212SFD

M-TX0300SEPItem

# #8 x 2½” Type 305 900ct.#7 x 3” Type 305 900ct.

Des

crip

tionM-YS8212SLP

M-YS7300SEP-WPItem

#

Recommended for installing most types of composite decking. Good for both fresh and salt water environments.Use with Muro M-TX207114 driver bit

Recommended by some manufacturers of composite decking or in applications where a low-profile screw head is desired. Good for salt water environments. Use Muro M-SQR17114 bit for 3” or M-SQR27114 bit for 2½”.

IPE x 2½” Type 305 900ct.IPE x 3” Type 305 900ct.

Des

crip

tionM-TX0212SLP-EJ

M-TX0300SEP-EJItem

#

Recommended for installing Ipe, Cumaru, and other higher density hard woods. Also works on higher density composites in freezing temperatures. Good for all environments.Use with Muro M-TX257114 driver bit

#10 x 2½” Type 17 1800ct.#10 x 3” Type 17 900ct.

Des

crip

tionM-ES8212WLP-GY

M-ES8300WEP-GYItem

# #10 x 3” 900ct.

Des

crip

tionM-TS0300CEP-GY

Item

#

Recommended for installing pressure-treated wood decking (CCA or ACQ). Not recommended for cedar, redwood, or salt water environments. Type 17 point reduces splitting.Use with Muro M-SQR27114 driver bit

Recommended for installing lower density, composite decking. Not recommended for salt water environments. Type 17 point reduces splitting.Use with Muro M-SQR27114 driver bit

Muro Screw Gun

Item# M-FDVL41E (w/ Ext. Handle)

The Muro Screw Gun is the time-saving tool that truly stands on its own. Built with industrial strength for the discriminating contractor, this one piece system has no awkward attachments.

No pre-drilling of wood is required, which all adds up to tremendous labor and time savings on every job.

Recommended Applications• Sub Floor• Underlayment• Decking• Docks• Backer Board• Roofing

Features• Adjustable depth control for repeatable

countersinking.• Drives 1” to 3” screws - slight adjustment required.• Reversible.• No more dropped or lost screws.• Ergonomically friendly - no more bending for every

single screw, can be fitted with extension handle - work while standing up.

• 150 screws per coil.• 1 year Warranty.

Operational Accessories• Extension T handle - fully adjustable, allows for

ergonomic operation. • Padded carry bag.• Double-ended bits - that change quickly, no tools

needed.

Mechanical SpecificationsSpeed:

Current:Weight:

Volts:Power Cord:

2900 RPM5.0 Amp8.8 lbs115V9’

Muro Driver Bits

LP-Square Drive 7¼ #1 Bit LP-Square Drive 7¼ #2 BitT20 Torx Drive 7¼ BitT25 Torx Drive 7¼ BitD

escr

ipti

onM-SQR17114M-SQR27114M-TX207114 M-TX257114

Item

#

Double-ended to last twice as long.

M-SQR17114

M-TX207114

M-SQR27114

M-TX257114

Tools


78

BoWrenchToolBoWrenchAdj

Item

#

BoWrenchD

escr

ipti

on

• Basic tool binds itself to any single or double 1½” joist.

• Custom size grippers or adjustable grippers available from factory

• Frees up hands and legs• Seconds to operate• Gripper swivels for angled

decking• Interchangeable parts for

pushing or pulling

• Bends multiple boards• Closes gaps up to 2¼” +• Left or right handed• Simple to operate• Powerful mechanical

advantage• All heavy coated steel

construction• Bends 5/4” and 2”x6” decking

BoWrench Deck ToolBoWrench Adjustable Joist Gripper adjusts (0”- 6½”)

Cant Hook 4’Cant Hook 4½’Cant Hook 5’

Item

#

Cant Hook

Des

crip

tion

Used to roll and position logs, as well as to spin pilings during installation.

Duckbill hook and extension toe ring are special analysis tool steel.

Wood handles.

Malleable Clasp Cant Hook with 4’ HandleMalleable Clasp Cant Hook with 4½’ HandleMalleable Clasp Cant Hook with 5’ Handle

Barnapole-II

Item

#

BarnaPole

Des

c.

The Barnapole barnacle removal tool is an innovative device used to scrape barnacles, oysters, mussels and other crustaceans from your seawall or dock pilings. The Barnapole easily attaches to any standard threaded pole (paint roller or broom handle). The Barnapole’s curved and flat scraper blades are made of solid stainless steel, and the handle attachment block is made from a solid aluminum extrusion. This combination of stainless steel and aluminum allows the Barnapole to withstand harsh marine environments.

If you’ve used a shovel or spade in the past, then you know it will only remove about an inch or so of growth with each pass, and you occasionally gouge the piling. The Barnapole is engineered specifically for pilings and seawalls and can remove up to 9 inches of buildup with each pass, saving you time and money. Also, Barnapole is designed to be used from the top of your dock, so there is no need for you to get in the water!

Double Bladed Barnapole Tool (Without Handle)

Ship Auger & Spade Bits

WB-.562WB-.687WB-.812

Item

#

Des

c. 9/16” x 6” (3/16” Hex Shank)11/16” x 6” (3/16” Hex Shank)13/16” x 6” (3/16” Hex Shank)

SA-.43718SA-.56218SA-.62518SA-.68718SA-.75018SA-.81218SA-.87518SA-.93718SA-1.00018SA-1.12518SA-1.25018SA-1.37518SA-1.50018SA-.68730SA-.75030SA-.81230

Item

#

Des

crip

tion

7/16” x 18”9/16” x 18”5/8” x 18”11/16” x 18”3/4” x 18”13/16” x 18”7/8” x 18”15/16” x 18”1” x 18”11/8” x 18”11/4” x 18”13/8” x 18”11/2” x 18”11/16” x 30”3/4” x 30”13/16” x 30”

(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 12” twist length(7/16” Hex Shank) with 25” twist length(7/16” Hex Shank) with 25” twist length(7/16” Hex Shank) with 25” twist length

Tools

79

Terms & Conditions

The Terms and Conditions of Sale apply to all products ordered from Dock Builders Supply.

OrdersTo facilitate filling your order, please be as specific as possible. Orders must specify product number, quantity desired, and any descriptive information (e.g. size or color). Every effort will be made to fulfill all orders; however, we cannot guarantee the availability of any particular product displayed in our catalog.

Back OrdersWe strive to keep backorders to a minimum, but occasionally we may be temporarily out of an item. Items that are out of stock at the time your order is processed will be backordered. Dock Builders Supply will do its best to inform you of any delays that it is made aware of, but will not be held liable for late delivery, missed shipments, installation delays, or other related deadlines out of its control. Special OrdersPlease let us know if there is something you need that is not listed in our catalog. We can often special order those items for you. Special orders are non-returnable and are non-refundable.

PricesCurrent pricing for all of the available products in our catalog can be found on our website at www.dockbuilders.com. Prices are FOB shipping point and do not include freight, applicable federal, state or local taxes, customs duties, brokerage fees, or export packing charges. Prices, specifications and availability of items are subject to change without notice. Volume DiscountsPlease call us when you need large quantities of an item. We may be able to offer you special, discounted volume pricing based on the quantity required.

Payments and TermsWe accept Visa, MasterCard, Discover, American Express, PayPal, wire transfers, money orders, cashier’s checks, personal checks, and company checks in U.S. Dollars only. All payment accounts, with the exception of wire transfers, must be issued by a US bank or financial institution and must have a billing address in the US. Payments can only be processed if the billing information can be verified. For personal and company checks, please allow up to 10 banking days after receipt for clearance of funds before the order is processed. We cannot guarantee the availability of a product by the time funds clear or payment is received. All returned checks (paper or electronic) are subject to a service fee of $25.00 or 5% of the face amount of the check, whichever is greater. We reserve the right to exclude or limit certain payment methods at any time.

Special volume priced quotes may be limited to certain payment methods.

Unless satisfactory credit terms are established in advance by execution of a separate credit agreement, payment for goods is required at the time of ordering. Dock Builders Supply reserves the right to charge a finance charge up to 1.5% per month (18% annually) of any order which remains unpaid after the invoice date. Customer agrees to reimburse Dock Builders Supply for reasonable attorneys’ fees and any other costs associated with collecting delinquent payments. Gift CertificatesWe issue gift certificates in the amount of $50 or more, and mail them to either you or the recipient, along with a catalog. Certificates may be ordered by phone and may be paid for via credit card. Gift certificates may be redeemed in person, by phone, or by mail and only by the person named on the certificate when originally purchased. Gift certificates are valid for one year from the date of purchase.

Sales Tax PolicyThe amount of tax charged on your order will depend upon many factors including the type of item purchased and destination of the shipment. Factors

can change between the time you place an order and the order is delivered, which could affect the calculation of sales tax. The amount appearing on your order as Estimated Tax may differ from the sales taxes ultimately charged. Where required, tax will also be applied to the shipping and handling charges.Depending on the tax laws in your state, you may be required to pay use tax on purchases for which we do not collect sales tax. If your order is tax exempt, please, send us a copy of your current sales tax exemption certificate via e-mail to [email protected] or via fax to 1.800.734.0335.

ShipmentsUnless you specify otherwise, we will ship your order in the most efficient way possible. If you have a preference of carrier, please tell us; we’ll honor your request if practicable. Smaller packages weighing less than 50 pounds are usually shipped via a parcel service such as FedEx or UPS, with charges prepaid and added to your invoice. Larger items are shipped via freight truck, with charges prepaid and added to your invoice. For freight truck orders, a shipping acknowledgement and verification form will be e-mailed and must be completed prior to shipment of your order. If you need your order rushed, please ask our representatives for a quote on expedited next-day or second-day air service.

Claims for Shortages or Damaged GoodsOn a rare occasion, a package may be lost or damaged in transit. For your protection, you should always carefully inspect any shipment before accepting delivery. If damage has occurred, you must note it on the delivery receipt. If a freight truck shipment is damaged, you must also immediately have the shipment inspected by the carrier. Obtain an inspection report from the carrier, and forward a copy to us. All claims must be filed within 7 days of receipt of shipment. Your Dock Builders Supply representative is available to assist with this process. Please call us at 1.800.677.4710. ReturnsAt Dock Builders Supply, we want you to be satisfied with your purchase. The vast majority of our products are eligible for return or exchange within 30 days of purchase provided they are unopened and unused; however, some products are not eligible for return. Products that cannot be returned or exchanged include, but are not limited to: custom colored dock sealants, aluminum gangways, piling wrap, filter fabric, mounted FlexMaster Fenders, power pedestals, 110 volt dock lighting, underwater lighting, solar illuminating buoys, Dock Sides, and Dow Styrofoam™ Billets. In addition, orders that received special volume pricing or contain special order or custom fabricated items are also not eligible for return, unless specifically stated as such on the estimate or sales order. If the products you purchased are eligible for return:1. Call your Dock Builders Supply representative at 1.800.677.4710, and request an exchange, credit, or refund.2. Your representative will issue a Return Authorization (RA) number – just include it with your package when you return it. We highly recommended that you use a shipping system that can track your shipment such as UPS or FedEx. If your order was sent to you via freight truck, then it will likely need to be returned via freight truck. All returns must be returned to Dock Builders Supply freight PREPAID. Dock Builders Supply is not responsible for freight charges on merchandise being returned for exchange, credit, or refund.3. Exchanges, credits and refunds are typically processed within 5-10 business days following the receipt and inspection of your return. Refunds will be made using the same method and to the same credit card used on the original order. Please note all merchandise returned NON-DEFECTIVE will be charged a 15% restocking fee. Refunds are calculated based on the purchase price of the merchandise only. All shipping and handling fees are non-refundable. Merchandise returned damaged (cosmetically or otherwise) is subject to an additional fee on a case-by-case basis (please call for details). Items showing obvious signs of use are not eligible for return. Items returned with missing parts and/or accessories will be charged accordingly. Note: the shipping costs for returns may be higher than the original shipment costs. The customer is responsible for ensuring the merchandise arrives at Dock Builders Supply in the same condition as when received.

Phone: 1.800.677.4710 (Mon-Fri 8-5 EST) Fax: 1.800.734.0335 Online: www.dockbuilders.comEmail: [email protected]

US Mail: Dock Builders Supply PO Box 3450 Apollo Beach, FL 33572

Terms & Conditions


80

Phone: 1.800.677.4710 (Mon-Fri 8-5 EST)Fax: 1.800.734.0335 Online: www.dockbuilders.comEmail: [email protected]

US Mail: Dock Builders Supply PO Box 3450 Apollo Beach, FL 33572

Cancellation PolicyIf you would like to cancel or change an order, you must contact us within 2 hours from the time the order was placed. We apologize, but orders placed online or over the phone begin processing immediately to ensure timely order fulfillment and shipping time. Our representatives will request a cancellation of your order at our warehouse. If successful, they will send you an email and the cancellation will be free of charge. If cancellation was not possible, the products will be delivered to you, which you will need to refuse upon receipt. The products will be returned to us and we will issue a refund for the merchandise only (including applicable tax); shipping and handling will not be refunded.

Export / International OrdersWe accept international orders by mail, phone, fax, e-mail and internet. All international shipments must be prepaid in U.S. currency via bank wire transfer. Any applicable duties, taxes, and customs charges are the responsibility of the customer. Residents of Canada and most U.S. Territories may reach us by calling 1.800.677.4710. From all other areas, please email us at [email protected] or call us at +1.813.677.4000. It is the sole responsibility of the Client to select and work with a qualified freight forwarder in the continental United States who can assist Client with all import/export documentation and formalities in order to comply with customs regulations. Dock Builders Supply will provide the Freight Forwarderwith a commercial invoice only. All Goods are assumed delivered in good condition upon delivery to such Freight Forwarder, unless Dock Builders Supply is notified within five (5) business days of delivery to Freight Forwarder. No returns will be accepted after this time.

Dock Plans and DesignsIf you need help designing your floating dock or if you would like a quote based on your unique configuration requirements, please give our knowledgeable sales team a call. We can often provide you with a cost estimate and drawings that meet your needs. Please keep in mind any drawings we provide are to be used as a rough guide only. Dock Builders Supply assumes no responsibility or liability for the design, structural integrity, accuracy, or completeness of the drawings. If your project requires precise calculations or specific load requirements, you should consult with an engineer who can provide more detailed plans specific to your project.

Product ChangesProducts are continually undergoing refinement in design and manufacture. Dock Builders Supply reserves the right to discontinue the sale of any product and to change pricing, terms, specifications, and warranties at any time without notice.

Product UseBuyer is responsible for evaluating whether a product is appropriate for a particular use or application. The conditions of evaluation, selection, and use of a product can vary widely and affect the use and application of a product. Because many of these conditions are uniquely within the buyer’s knowledge and control, it is essential that buyer evaluate whether the product is suitable and appropriate for a particular use or application.

Order AcceptanceDock Builders Supply reserves the right to cancel any order prior to delivery, at Dock Builders Supply’s sole discretion, whether or not payment was made. If payment was made and your order is cancelled, we will issue an appropriate credit to your account, or may contact you to collect information in order to do so.

Color AccuracyWe have done our best to display the colors of the products as accurately as possible in this catalog. However, due to printing limitations, we will not be held liable for variations in color. If the color of a specific product is extremely important to you, please call and ask if a sample is available before placing your order. Some products, such as our nautical hose holders and address plaques, are airbrushed by hand, so no two pieces will be exactly the same.

MisprintsAt Dock Builders Supply, we strive to ensure our catalogs are correct before sending them to print, but occasionally errors do occur. Dock Builders Supply will not be held responsible for printing errors.

Local Standards and RegulationsCertain products sold by Dock Builders Supply are designed to satisfy state and federal requirements. Because local standards and regulations may vary significantly, Dock Builders Supply cannot guarantee products meet all applicable requirements in each locale. The purchaser assumes responsibility for compliance with local standards, codes, and regulations where the products will be shipped, sold and used. WarrantiesMany products sold by Dock Builders Supply are covered against defects by manufacturers’ warranties. A copy of each manufacturer’s warranty is available upon request. If you experience any product defects inside of our return period or have any questions, please call us at 1.800.677.4710. If failure of a product purchased through us occurs during the manufacturer’s warranty period, a claim for adjustment may be submitted directly to the manufacturer, or our company will assist on submitting such claims. Products sent to us for warranty consideration are accepted only under the conditions stated in the manufacturers’ policies. Please note acceptance of such items by us for submission to the manufacturer does not imply validity to any claim. All decisions regarding the repair or replacement of any items are the sole responsibility of the manufacturer. Under no circumstances are we as a distributor, authorized to replace a defective item prior to submitting such item to the manufacturer. Disclaimer of WarrantiesDock Builders Supply disclaims all warranties either express or implied, including but not limited to implied warranties of merchantability and fitness for a particular purpose with respect to any product purchased from any Dock Builders Supply retail store, website, or catalog. Dock Builders Supply’s liability in connection with a customer’s purchase is expressly limited to Dock Builders Supply’s return policy set forth above, and all claims for consequential, incidental, or special damages are hereby excluded. IndemnityNeither Dock Builders Supply, nor W.R. Williams Enterprises, Inc. shall be subject to, and disclaims: (1) any obligations or liabilities arising out of breach of contract or of warranty, (2) any obligations whatsoever arising from tort claims (including negligence and strict liability) or arising under other theories of law with respect to products sold or services rendered by Dock Builders Supply, or any undertakings, acts, or omissions relating thereto, and (3) all consequential, incidental, or contingent damages whatsoever including, but not limited to, labor costs or loss of profits arising out of or in conjunction with the manufacture, sale, delivery, use of, or inability to use any products purchased from Dock Builders Supply.

Governing Law / Venue / Jurisdiction This agreement shall be construed and enforced in accordance with the laws of the state of Florida without regard to the conflicts of law provisions thereof. ALL SALES TRANSACTIONS EXCLUDE THE APPLICATION OF THE 1980 UNITED NATIONS CONVENTION ON CONTRACTS FOR THE INTERNATIONAL SALES OF GOODS, IF OTHERWISE APPLICABLE. All claims, actions, disputes, controversies or suits shall be litigated exclusively in the courts of competent jurisdiction in Hillsborough County, Florida, United States. Each party specifically consents to service of process by and the jurisdiction of and venue in those courts and Customer, if not a resident of the United States, hereby appoints the Secretary of State of Florida as its agent for service of process in the United States.

Terms & Conditions

81

Index

If you don’t see the product you’re looking for, give us a call! 1.800.677.4710

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 - 6 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 -25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17, 21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 -70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 -76

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 -31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 -76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72-73. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 -29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72-73. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 -70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 -31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 -31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15. . . . . . . . . . . . . . . . . . . .15

. . . . . . . . . . . . . . . . . . . . . . . . . .15. . . . . . . . . . . . . . . . . . . . . . .15

. . . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 -25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 4 -51

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 -59

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 , 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76. . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 -31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 -70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 -31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 -21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

. . . . . . . . . . . . . . . . . . . . . . . . 6 - 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 -10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0. . . . . . . . . . . . . . . . . . . . . . . . . . . .74 -76

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 -17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 - 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 -25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 4 - 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 8 -51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-53

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 -77

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 - 6 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38. . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0. . . . . . . . . . . . . . . . . . . . . . . . .41

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Address PlaquesAluminum GangwaysAluminum LaddersAnchor RodsAuger BitsAxlesBarnapole™ (barnacle tool)Boarding StepsBoat BoxesBolts BoWrench™BumpersBuoys, MarkerBuoys, MooringCable TiesCant HookCaps, PostCarriage BoltsCarts, DockChain RetainerCleatsCoatings & SealantsCorner BumpersDe-Icer (D-Icer™)Deck SealantsDecking (ThruFlow™)Dock BoxesDock BumpersDock CartsDock EdgingDock FlotationDock Hardware Angle Brackets Angle Clip Axles Backup Plates Carriage Bolt Sets Chain Hoop Pile Holder Chain Retainer Cleats Connector Pin Set Finger Deck Stabilizer Gangway Hinges Gangway Rollers Hoop Pile Holders Inside Corners Internal Pile Guides Outside Corner End Outside Corner Male Outside Corner Female Outside Corner Female/Female Outside Corner Male/Male Outside Corner Male/Female Piling Hoops / Guides Piling Strap Hoops Pipe Holders Ramp Rollers

Roller Assembly Splice Plate T-Connectors Washer Plate Wheels (gangway/ramp)Dock LaddersDock LightingDock ShowerDock Sides (Accessories)Dock StepsDock WheelsDOW™ Styrofoam™ BilletsDrill BitsDriver BitsEmergency Response Spill KitEncapsulated Dock FloatsEPS Encapsulated FloatsFabric (Seawall)Fasteners - Galvanized Carriage Bolts HDG Common Nails HDG Hex Cap Bolts HDG Hex Lag Bolts HDG Hex Nuts HDG Washers HDGFasteners - Stainless Steel Carriage Bolts SS Decking Screws SS Hex Cap Bolts SS Hex Lag Bolts SS Hex Nuts SS Muro™ Screws SS Ring Shank Nails SS Washers SSFenders / Fender BracketsFiberglass Dock BoxesFiberglass Dock StepsFilter Fabric (TerraTex™)Firehouse™Fish Cleaning StationsFish Attraction LightsFlexmaster™ FendersFloat DrumsFloating Docks Dock Floats Dock Plans Hardware Permaport™ PWC Lift PhotosFlotation DockBuilders™ Dock Floats Encapsulated Floats Lift Tanks Permaport™ PWC Lift PolyFlange™ Dock Floats Styrofoam™ Billets Wave Attenuaters

Index


82

If you don’t see the product you’re looking for, give us a call! 1.800.677.4710

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0. . . . . . . . . . . . . . . . . . . . . . . . . . . .74 -76

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 -17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 - 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 -25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 4 - 47. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 8 -51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52-53

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75 -77

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 - 6 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38. . . . . . . . . . . . . . . . . . . . . . . . . . .19 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15, 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0. . . . . . . . . . . . . . . . . . . . . . . . .41

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 -21

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 -31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 -78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74. . . . . . . . . . . . . . . . . . . . . . . . . . .74

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72-73

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32-33. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 8 -51. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 6 -70

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 0 - 43

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 -31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 53

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 , 74 -77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 0 - 65

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72-73

Roller Assembly Splice Plate T-Connectors Washer Plate Wheels (gangway/ramp)Dock LaddersDock LightingDock ShowerDock Sides (Accessories)Dock StepsDock WheelsDOW™ Styrofoam™ BilletsDrill BitsDriver BitsEmergency Response Spill KitEncapsulated Dock FloatsEPS Encapsulated FloatsFabric (Seawall)Fasteners - Galvanized Carriage Bolts HDG Common Nails HDG Hex Cap Bolts HDG Hex Lag Bolts HDG Hex Nuts HDG Washers HDGFasteners - Stainless Steel Carriage Bolts SS Decking Screws SS Hex Cap Bolts SS Hex Lag Bolts SS Hex Nuts SS Muro™ Screws SS Ring Shank Nails SS Washers SSFenders / Fender BracketsFiberglass Dock BoxesFiberglass Dock StepsFilter Fabric (TerraTex™)Firehouse™Fish Cleaning StationsFish Attraction LightsFlexmaster™ FendersFloat DrumsFloating Docks Dock Floats Dock Plans Hardware Permaport™ PWC Lift PhotosFlotation DockBuilders™ Dock Floats Encapsulated Floats Lift Tanks Permaport™ PWC Lift PolyFlange™ Dock Floats Styrofoam™ Billets Wave Attenuaters

Gangways Aluminum Gangways Wood Gangway Hinges Wood Gangway RollersGreen Fish LightsGuides, PilingHatteras™ Light PedestalHex Bolts / Washers / NutsHingesHoop Pile HoldersHose HoldersHose StanchionsInflatable Dock BumpersInflatable Dock WheelsInternal Pile GuidesJet Ski PlatformLadders, AluminumLift TanksLighthouse™ Power PedestalsLighting 110V Lights Fish Attraction Lights Marine Warning lights Solar Lights Underwater LightsLine HoldersMarker BuoysMarker Buoys, IlluminatedMarker Buoys, Solar PoweredMooring Products Mooring Buoys Mooring Snubbers Mooring Whips™ SlideMoor™ TideSlides™Muro™ Screw Gun & ScrewsNails Nautical AccessoriesPermaport™ PWC LiftPersonal Watercraft LiftPiling Hoops/Straps/GuidesPiling WrapPiling CapsPipe BracketsPipe HoldersPolyFlange™ Dock FloatsPower Pedestals Admiral™ SS Firehouse™ Hatteras™ Light Lighthouse/Lighthouse™ SS Newport Harbor Mate™ Slimline Dockside™ Standard Dockside™PWC Lift

Ramps Aluminum Ramps Wood Ramp Hinges Wood Ramp RollersRecycled Plastic LumberRetaining Wall ProductsRollers Gangway Piling Hoop/GuideRope CatchersRub RailScraper (Barnapole™)Screw GunScrewsSeawall Products Filter Fabric (TerraTex™) Plate Washers & Hex Nuts Tieback RodsSealantsShip Augers & Spade BitsShower / Outdoor ShowerSlideMoor™Slimline™ Power PedestalsSolar LightingSpa-N-Deck™Spade BitsStandoff BracketsSteps, BoardingStorage BoxesStyrofoam™ BilletsTerraTex™ HD (Filter Fabric)ThruFlow™ DeckingTideSlides™Tieback RodsTools Barnapole™ BoWrench™ Cant Hook Screw Gun (Muro™) Ship Augers Spade BitsTrash ReceptaclesUnderwater Dock LightsUtility Posts (Water)Utility Posts (Electric)Vinyl BumperWarning Lights, MarineWashers / NutsWater Hose HoldersWater StanchionsWave AttenuatorsWheels Gangway/Ramp Wheels Dock Bumper WheelsWoodRX™Wood Sealants

Index

83

POBOX3450•ApolloBeach,Florida33572Phone: 813.677.4000•Fax:813.677.1516Toll Free: 800.677.4710•Fax:800.734.0335E-Mail: [email protected]•Website:www.dockbuilders.com

PRESORTEDSTANDARD

U.S. POSTAGEPAID

RIVERVIEW, FLPERMIT NO. 9

dock builders supply - products catalog (volume 10)

Documents