doing business with southern queensland steel · 2017. 5. 21. · our plate processing capabilities...
TRANSCRIPT
Doing Business with Southern Queensland Steel Steel Processing Capabilities
Southern Queensland Steel has Queensland’s largest range of steel processing equipment housed in it 20,000m2 state of the art warehouses. Our customers tell us that by using our processing facilities they are able to substantially increase their productivity, allowing them to take on larger projects, finishing them faster and within budget. Customers utilising our processing facility have increased productivity through reduced handling and minimising non conforming product.
Our equipment can be programmed from your workshop drawing or by electronic data transfer such as DXF, DWG, NC1 & DSTV files, programming through Data Transfer will insure what your Steel Detailer produced, you WILL receive.
Our range of equipment includes CNC Beam Lines, Angles Lines, Band Saws and Cropping Lines capable of processing the full range of structural steel, merchant bar, pipe and tube. Our plate processing capabilities include plasma and oxy cutting drilling, counter-sinking, boring, bevelling and marking of the largest available plate.
To discuss your needs in steel processing call Southern Queensland Steel today. We look forward to doing business with you.
Please refer to the capabilities matrix on the other side of this brochure.
www.sqsteel.com.au
Structural Steel, pipe anD tuBe anD merchant Bar
CNC Cropping and Punching Line
Up to 250 UB,150 UC and 250 PFC Up to 32mm diameter holesUp to 22mm x 32mm slotsUp to 18.0m longHard stamping
CNC Angle Line
Angles from 40mm x 5mm to 200mm x 26mmUp to 32mm diameter holesUp to 22mm x 32mm slotsUp to 12.0m longHard stamping
CNC Beam Lines
Up to 1,200 WB and 500 WCSHS up to 406mm x 406mmRHS up to 508mm x 203mmUp to 40mm diameter holesMitre cutting 45o / 60o Slotting, tapping, counter sinking and boringUp to 21.0m longHard stamping and scribing
CNC Band Saws
Up to 700 WB and 500 WCSHS up to 406mm x 406mmRHS up to 508mm x 203mmCHS up to 508mm ODUp to 20.0m longMitre cutting 45o / 60o
97 Coulson Street Wacol QLD 4076 Ph: 07 3271 9111Fax: 07 3271 9100Email: [email protected]
SOuthern QueenSlanD Steel ptY ltD
Steel prOceSSinG capaBilitieS matriX
plate anD wiDe flatS
Plate Processing
Bevel angle from -45o to +45o
Combination bevels up to 32mm thick at 45o including “K”, knife and landing bevelsAngle setting accuracy ±2o
High definition plasma cutting up to 70mm thickOxy cutting up to 150mm thickPin marking of part numbers and plasma marking of fold linesDrilled holes from 8mm to 80mm in plate to 150mm thickMillingTapping from M10 to M40Counter sinking and boring
Plate/Flat Bar Processing
Up to 500mm wideUp to 9.0m longUp to 25mm thickDrilling up to 25mm holesPunching up to 46mm roundSlot punching up to 26mm x 32mmShearing with compound mitre on leading edges up to ±45o
Plasma cutting of shaped cleats
ToowoombaTownsville
MackayMaroochydore
Branches in: