door collection
TRANSCRIPT
Polyester
5-PIECEDOOR COLLECTION
richelieu.com1 450 687-9199 • 1 866 979-5999 1 450 687-8477 • 1 866 421-84772
RECOMMENDATION :We recommend the use of a third hinge (non-sprung) on doors measuring 36’’ or more in height.
Our 5-piece Polyester collection doors offer countless possibilities for kitchen, bathroom, office, closet and health care design professionals.
Moreover, they are offered with a complete line of complementary products in the same base materials and prints to perfectly match the doors, such as TFL, HPL, moldings and edgebanding.
Offered in many designs and colors, these trendy products are synonymous with quality, beauty and durability for all your creations.
CHARACTERISTICS:
Ø Profile wrapped in the same base materials and prints to match TFL
Ø Stile and rail construction with perpendicular grain direction, like wooden doors
Ø Back and front in relief with matching colors Ø Permanent antimicrobial surface with high heat, scratch
and stain resistance Ø Zero formaldehyde emission may be achieved with
assembled doors Ø New addition will be a perfect match to the original Ø Easy maintenance
Description
FEATURES:
Door:The woodgrain direction of the1/4’’ center panel is vertical.
Frame Door:Frame only, no center. A rubber molding to be inserted in the groove is supplied in order to hold the glass in place.
Drawer front:The woodgrain direction of the1/4’’ center panel is horizontal.
Frame Door
Drawer front
Door
For color availability, see the color chart (tab).
MODEL Thickness Width(frame)
Minimum(for 1” centers)
Minimum(definite)
Maximum(Maximum height
for warranty)
Maximum(definite)
Cascadia3/4” 2 1/4” 5 1/2” 5 1/2” 50” 61”
19 mm 57 mm 140 mm 140 mm 1270 mm 1550 mm
2 1/4”
3/4”
2 1/4”
3/4”
Door Frame Door*
*Glass size: Door size minus 4 13/16” (122 mm)
Profiles
Cascadia Model
richelieu.com1 450 687-9199 • 1 866 979-5999 1 450 687-8477 • 1 866 421-8477 3
MODEL Thickness Width(frame)
Minimum(for 1” centers)
Minimum(definite)
Maximum(Maximum height
for warranty)
Maximum(definite)
Pacifica3/4” 1 1/2” - 2 1/4” 5 1/2” 5 1/2” 50” 61”
19 mm 38 mm - 57 mm 140 mm 140 mm 1270 mm 1550 mm
Drawer front
Door
Profiles
Pacifica Model
For color availability, see the color chart (tab).
The stiles and rails are 1 1/2’’ wide on the front and 2 1/4’’ wide on the back.
Door
2 1/4”
1 1/2”
3/4”
richelieu.com1 450 687-9199 • 1 866 979-5999 1 450 687-8477 • 1 866 421-84774
Frame door not available for this model.
Cut-to-size panels and components
Our custom-made panels and components are manufactured to your specifications. They can be edgebanded on all sides with 1 mm matching edgeband or have designated edges unfinished. These components are ideal for use as end panels, fillers, accessory parts, etc.
Cut-to-size panels and components
The components are available for the 5-Piece Collection using the Verona door of the Azura Collection.
Graindirection Thickness Minimum
HeightMinimum
WidthMaximum
HeightMaximum
Width
Maximum(Maximum height
for warranty)
Horizontal grain 3/4”19 mm
3 3/4’’95 mm
5 1/2’’140 mm
60”1524 mm
95’’2413 mm
50”1270 mm
Vertical grain 3/4”19 mm
3 3/4’’95 mm
5 1/2’’140 mm
95’’2413 mm
60’’1524 mm
50”1270 mm
richelieu.com1 450 687-9199 • 1 866 979-5999 1 450 687-8477 • 1 866 421-8477 5
CA
B
D
richelieu.com1 450 687-9199 • 1 866 979-5999 1 450 687-8477 • 1 866 421-84776
Complementary products
Polyester and TFL Moldings
Printed colors may differ from real colors. Please ask for samples.
Terra 3034
Toscana 3031
Bianco3032
Miele 3033
Rainier White 710
Tenino Walnut 7126
Verona Custom made light shield
Baseboard Molding(4794)
Batten Molding(4632)
Shaker Crown Molding(4716)
1 1/4"
31.8 m
m
1/4"6.35 mm
4 3/8"
111.8 mm
3 3/4"94.9 mm
2 1/
2"6
2.3
mm
4 1/2"
114.3 m
m
3/4"19.7 mm
2 1/2"6
2.3 mm
3/4"19.7 mm
Edgebanding Laminate sheets TFL panels
Check for product availability with your Richelieu distributor or at www.richelieu.com.
Available colors - Edgewood texture
Polyester Polyester Polyester TFL
richelieu.com1 450 687-9199 • 1 866 979-5999 1 450 687-8477 • 1 866 421-8477 7
WarrantyAll doors from our Polyester 5-Piece Collection are covered by a 5-year limited warranty against all manufacturing defects.
INCLUDED :(Covered by the warranty)
Ø Wrong size (tolerance +/- 1/32" or +/- 0.8 mm) Ø Out of square (tolerance +/- 1/32" or +/- 0.8 mm out of square) Ø Center of a door or drawer front that hasn’t been installed in the right direction Ø Warping greater than tolerance (see General Rules)
Ø Detached assembly joint Ø Delamination of the edgebanding
For such inclusions to be covered, the door must not have suffered any shocks, exposure to a source of heat, contact with water or any other liquid substances. Moreover, it must have been installed according to recognized industry practices.
GENERAL RULES :
Ø All claims must be submitted before the expiration of the warranty period (i.e., 5 years from the delivery date of the doors). Ø The replacement or repair of a door may in no case extend the original 5-year warranty. Ø Both the invoice and defective door must be returned to the fabricator for expert examination. Ø The replaced doors will be invoiced at 100% and a credit will be issued following examination of the defective doors. Ø If, at the time the warranty is being used, the color and/or model of the doors in question are no longer available for reasons
beyond our control, we reserve the right to replace (or credit) the defective door(s) with another equivalent color or model without compensation for the remaining doors on the same order.
Ø Transportation costs for the delivery of the replacement doors are subject to the same coverage percentages as the doors being replaced. Ø The warranty is limited to the replacement or repair of the defective door without any compensation for labor and/or loss
of use of the product. Ø The warping warranty only applies to doors 32’’ or less with a 1/8’’ tolerance (measured at center, with the door flat on a very
straight surface, e.g., panel saw). Ø Warping problems must be detected and reported within 10 days following reception of the order, and the defective door(s) must
not have been altered in any way (drilled for hinges, handles installed, etc). Ø Door claims that involve breakage at the reception of the order with no damaged box must be made within five days following
reception of the order, and the defective door(s) must not have been altered in any way (drilled for hinges, handles installed, etc). The door(s) in question must be returned to the fabricator.
Ø Doors measuring 50’’ or more are not covered by any warranty. Ø The warranty coverage is pro-rated as follows:
• 100% for the first two years • 75% for the third year • 50% for the fourth year • 25% for the fifth year
DOORS DAMAGED DURING TRANSPORTATION :When you receive the boxes, always make sure they have not been damaged during transportation before signing the delivery document. Ifany of the boxes have been damaged, write ‘‘Damaged Box‘‘ or ‘‘Damaged Boxes‘‘ on the waybill. You must keep the box(es) in questionas well as the doors to be replaced for our claim to the transportation company. Notify us immediately about the problem, so that repaireddoors or replacement doors may be shipped to you as soon as possible. If you have an agreement with a carrier that allows them to leave packages without your signature, be advised that this agreement prevents any claim made for doors broken in transport.
MISSING BOXES:When you receive the boxes, please make sure the number of boxes delivered matches the number shown on the delivery document.If some boxes are missing, write ‘‘Missing Boxes‘‘ on the document before signing it, indicating the number of missing boxes.Notify us immediately about the problem so that a search can be made to locate the missing package(s).
NOT INCLUDED:(Not covered by the warranty)
Ø Melamine, joint and assembly breaks following shock, negligence, misuse, exposure to a source of excessive heat (> 300 ºF) or contact with water or other liquid substances (swelling of material)
Ø All defects that result from misuse and/or use not in accordance with recognized industry practices Ø Deterioration of a door that was exposed to abnormal temperature and/or humidity conditions Ø Burns on one of the materials Ø Stains on one of the door components Ø Degradation of the product due to material aging or normal wear and tear
richelieu.com1 450 687-9199 • 1 866 979-5999 1 450 687-8477 • 1 866 421-84778
Images are not to scale. Actual colors may differ from printed reproductions. For optimum precision, request product samples.
Tel.: 1 866 979-5999 • Fax: 1 866 421-8477 Tel.: 1 866 979-5999 • Fax: 1 866 421-8477CANADA USA
ALBERTA Calgary Edmonton
BRITISH COLUMBIA Kelowna Vancouver Victoria
MANITOBA Winnipeg
SASKATCHEWAN Regina Saskatoon
WASHINGTON Seattle
POLY
WB
REN
1st E
dit
ion
04-
2016
Pr
inte
d in
Can
ada
$2
Visit www.richelieu.comVisit our website and try our step-by-step web module in the Cabinet Doors section.