door plates - standard metal
TRANSCRIPT
DOOR PLATES
Door Plates Door Plates
K08 CleAr ACryliC PlAte
MAteriAl: clear Acrylic NOteS: 0.125” Thickness, Beveled edges, countersunk Screw Holes MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape (Recommended)
PrOdUCt OPtiONS: Over 30 colours Available StOCK COlOUrS: Black, Beige, Blue, Grey, & White
NO. A B (GrAiN direCtiON) K09 Specify Specify
K09 Kydex PlAte
MAteriAl: Kydex NOteS: pVc & Acrylic Textured finish, 0.060 Thickness, Beveled edges MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape (Recommended)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 3
Door Plates Door Plates
K10r MetAl dOOr PlAte w/ rAdiUS COrNerS
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: Fire rAted 18GA AVAilABle: Use suffix code f (K10f) MAteriAl tHiCKNeSS: K10A = 0.050”, K10B = 0.062”, K10c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location
K10 MetAl dOOr PlAte
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: Fire rAted 18GA AVAilABle: Use suffix code f (K10Rf) MAteriAl tHiCKNeSS: K10A = 0.050”, K10B = 0.062”, K10c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location
NO. A B (GrAiN direCtiON) K10 Specify Specify
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected]
Door Plates Push Plates
MetAl PUSH PlAte
NO. A B (GrAiN direCtiON) K11 Specify (6” MAx) Specify (20” MAx) K11A-1 3” 12” K11A-2 3.5” 15” K11A-3 4” 16” K11A-4 4” 20” K11A-5 5” 15” K11A-6 5” 20” K11F (FeMAle) 5” 20” K11H (wHeel CHAir) 5” 20” K11M (MAle) 5” 20”
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film, custom Sizes Available MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K11A = 0.050” , K11B = 0.062” , K11c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K11f)
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B (GrAiN direCtiON) K12 Specify (4” MAx) Specify (20” MAx)
K12 MetAl PUSH PlAte w/ rOUNd eNdS
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K12A = 0.050” , K12B = 0.062” , K12c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K12f)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 5
Door Plates Push Plates
NO. A B (GrAiN direCtiON) K14 Specify (6” MAx) Specify (20” MAx) K14-1 3” 12” K14-2 3.5” 15” K14-3 4” 16” K14-4 4” 20” K14-5 5” 15” K14-6 5” 20”
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K14A = 0.050” , K14B = 0.062” , K14c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K14f)
NO. A B (GrAiN direCtiON) K13 Specify (6” MAx) Specify (20” MAx)
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
K13 SeMi-CirCUlAr MetAl PUSH PlAte
K14 MetAl PUSH PlAte w/ rOUNded COrNerS
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K13A = 0.050” , K13B = 0.062” , K13c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K13f)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected]
Door Plates Push Plates
NO. A B (GrAiN direCtiON) K16 Specify (6” MAx) Specify (20” MAx) K16-1 3” 12” K16-2 3.5” 15” K16-3 4” 16” K16-4 4” 20” K16-5 5” 15” K16-6 5” 20”
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B (GrAiN direCtiON) K15 Specify (4” MAx) Specify (20” MAx)
K15 COlONiAl MetAl PUSH PlAte
K16 d-SHAPe MetAl PUSH PlAte
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K15A = 0.050” , K15B = 0.062” , K15c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K15f)
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K16A = 0.050” , K16B = 0.062” , K16c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K16f)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 7
FeAtUred FiNiSHeS: flat Black (19), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: cast Brass, Bronze NOteS: countersunk Screw Holes MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B C K17 2.625” 15.5” 0.25”
PrOdUCt OPtiONS: eScUTcHeON cUT OUTS: Specify hole diameter and location // eNGRAViNG: Specify type and location
K17 CASt PUSH PlAte
FeAtUred FiNiSHeS: flat Black (19), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: cast Brass, Bronze NOteS: countersunk Screw Holes MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B C K22 3.75” 18.25” 0.25”
PrOdUCt OPtiONS: eScUTcHeON cUT OUTS: Specify hole diameter and location // eNGRAViNG: Specify type and location
K22 CASt PUSH PlAte
Door Plates Cast Push Plates
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected]
We offer custom engraving and cutouts for all of our door plates
engravings, Cutouts & esCutCheon Plates
Engravings
numbers, letters, pictos and logos available standard font is 1” single stroke (other fonts and sizes available upon request) engraving comes standard black paint filled (other colours available upon request) available in all materials and finishes available with braille translation
sTanDarD Engraving CODEs (Male PiCto) = use suffix code “m” to your product code — ex. K12m (FeMale PiCto) = use suffix code “f” to your product code — ex. K11f (WheelChair PiCto) = use suffix code “H” to your product code — ex. K14H
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 9
We offer custom engraving and cutouts for all of our door plates
engravings, Cutouts & esCutCheon Plates
CuTOuTs
custom cutouts available in any size or shape provide size and location of cutout available in all materials and finishes
EsCuTChEOns
Door Plates Door Plates
K08 CleAr ACryliC PlAte
MAteriAl: clear Acrylic NOteS: 0.125” Thickness, Beveled edges, countersunk Screw Holes MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape (Recommended)
PrOdUCt OPtiONS: Over 30 colours Available StOCK COlOUrS: Black, Beige, Blue, Grey, & White
NO. A B (GrAiN direCtiON) K09 Specify Specify
K09 Kydex PlAte
MAteriAl: Kydex NOteS: pVc & Acrylic Textured finish, 0.060 Thickness, Beveled edges MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape (Recommended)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 3
Door Plates Door Plates
K10r MetAl dOOr PlAte w/ rAdiUS COrNerS
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: Fire rAted 18GA AVAilABle: Use suffix code f (K10f) MAteriAl tHiCKNeSS: K10A = 0.050”, K10B = 0.062”, K10c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location
K10 MetAl dOOr PlAte
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: Fire rAted 18GA AVAilABle: Use suffix code f (K10Rf) MAteriAl tHiCKNeSS: K10A = 0.050”, K10B = 0.062”, K10c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location
NO. A B (GrAiN direCtiON) K10 Specify Specify
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected]
Door Plates Push Plates
MetAl PUSH PlAte
NO. A B (GrAiN direCtiON) K11 Specify (6” MAx) Specify (20” MAx) K11A-1 3” 12” K11A-2 3.5” 15” K11A-3 4” 16” K11A-4 4” 20” K11A-5 5” 15” K11A-6 5” 20” K11F (FeMAle) 5” 20” K11H (wHeel CHAir) 5” 20” K11M (MAle) 5” 20”
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film, custom Sizes Available MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K11A = 0.050” , K11B = 0.062” , K11c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K11f)
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B (GrAiN direCtiON) K12 Specify (4” MAx) Specify (20” MAx)
K12 MetAl PUSH PlAte w/ rOUNd eNdS
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K12A = 0.050” , K12B = 0.062” , K12c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K12f)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 5
Door Plates Push Plates
NO. A B (GrAiN direCtiON) K14 Specify (6” MAx) Specify (20” MAx) K14-1 3” 12” K14-2 3.5” 15” K14-3 4” 16” K14-4 4” 20” K14-5 5” 15” K14-6 5” 20”
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K14A = 0.050” , K14B = 0.062” , K14c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K14f)
NO. A B (GrAiN direCtiON) K13 Specify (6” MAx) Specify (20” MAx)
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
K13 SeMi-CirCUlAr MetAl PUSH PlAte
K14 MetAl PUSH PlAte w/ rOUNded COrNerS
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K13A = 0.050” , K13B = 0.062” , K13c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K13f)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected]
Door Plates Push Plates
NO. A B (GrAiN direCtiON) K16 Specify (6” MAx) Specify (20” MAx) K16-1 3” 12” K16-2 3.5” 15” K16-3 4” 16” K16-4 4” 20” K16-5 5” 15” K16-6 5” 20”
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
FeAtUred FiNiSHeS: flat Black (19), Satin Stainless (32D), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: Aluminum, Brass, Bronze, Stainless Steel NOteS: countersunk Screw Holes, protective plastic film MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B (GrAiN direCtiON) K15 Specify (4” MAx) Specify (20” MAx)
K15 COlONiAl MetAl PUSH PlAte
K16 d-SHAPe MetAl PUSH PlAte
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K15A = 0.050” , K15B = 0.062” , K15c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K15f)
PrOdUCt OPtiONS: MAteriAl tHiCKNeSS: K16A = 0.050” , K16B = 0.062” , K16c = 0.10” eSCUtCHeON CUt OUtS: Specify hole diameter and location eNGrAViNG: Specify type and location Fire rAted 18GA AVAilABle: Use suffix code f (K16f)
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 7
FeAtUred FiNiSHeS: flat Black (19), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: cast Brass, Bronze NOteS: countersunk Screw Holes MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B C K17 2.625” 15.5” 0.25”
PrOdUCt OPtiONS: eScUTcHeON cUT OUTS: Specify hole diameter and location // eNGRAViNG: Specify type and location
K17 CASt PUSH PlAte
FeAtUred FiNiSHeS: flat Black (19), Antimicrobial (AM) FiNiSHeS: Standard & custom Available (See pages 14 & 15) MAteriAlS: cast Brass, Bronze NOteS: countersunk Screw Holes MOUNtiNG OPtiONS: SMS (Standard), MS, TeK (SDS), Torx, Tape, No Holes/No Tape
NO. A B C K22 3.75” 18.25” 0.25”
PrOdUCt OPtiONS: eScUTcHeON cUT OUTS: Specify hole diameter and location // eNGRAViNG: Specify type and location
K22 CASt PUSH PlAte
Door Plates Cast Push Plates
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected]
We offer custom engraving and cutouts for all of our door plates
engravings, Cutouts & esCutCheon Plates
Engravings
numbers, letters, pictos and logos available standard font is 1” single stroke (other fonts and sizes available upon request) engraving comes standard black paint filled (other colours available upon request) available in all materials and finishes available with braille translation
sTanDarD Engraving CODEs (Male PiCto) = use suffix code “m” to your product code — ex. K12m (FeMale PiCto) = use suffix code “f” to your product code — ex. K11f (WheelChair PiCto) = use suffix code “H” to your product code — ex. K14H
TOLL FREE: 1-800-267-5442 | www.smhardware.com | [email protected] FREE: 1-800-267-5442 | www.smhardware.com | [email protected] 9
We offer custom engraving and cutouts for all of our door plates
engravings, Cutouts & esCutCheon Plates
CuTOuTs
custom cutouts available in any size or shape provide size and location of cutout available in all materials and finishes
EsCuTChEOns