dop - declaration of performance tecnofloor tw-3040 · carbon dioxide permeability € en...
TRANSCRIPT
![Page 1: DoP - DECLARATION of PERFORMANCE TECNOFLOOR Tw-3040 · Carbon dioxide permeability € EN 1062-6:2003 Sd>50 m. Water/vapor transmission properties ISO 7783:2012 Class I: SdË‚ 5](https://reader033.vdocuments.net/reader033/viewer/2022042918/5f5d3e8e8bc8aa564672b936/html5/thumbnails/1.jpg)
DoP - DECLARATION of PERFORMANCE TECNOFLOOR Tw-3040Construction Products Regulation nª305/2011
Manufacturer TECNOPOL SISTEMAS, S.L.
AdressFinlàndia, 33 08520 Les Franqueses del Vallès · Barcelona · Spain
Contact t +34 935 682 111 · f +34 935 68 0211 · [email protected]
Manufacturer TECNOPOL SISTEMAS, S.L.
AdressFinlàndia, 33 08520 Les Franqueses del Vallès · Barcelona · Spain
Contact t +34 935 682 111 · f +34 935 68 0211 · [email protected]
Manufacturer TECNOPOL SISTEMAS, S.L.
AdressFinlàndia, 33 08520 Les Franqueses del Vallès · Barcelona · Spain
Contact t +34 935 682 111 · f +34 935 68 0211 · [email protected]
Manufacturer TECNOPOL SISTEMAS, S.L.Manufacturer TECNOPOL SISTEMAS, S.L.
AdressFinlàndia, 33 08520 Les Franqueses del Vallès · Barcelona · Spain
AdressFinlàndia, 33 08520 Les Franqueses del Vallès · Barcelona · Spain
Contact t +34 935 682 111 · f +34 935 68 0211 · [email protected] t +34 935 682 111 · f +34 935 68 0211 · [email protected] +34 935 682 111 · f +34 935 68 0211 · [email protected]
Product/system identification TECNOFLOOR Tw-3040, epoxy water-based resin
Use for flooring (industrial, commercial..)
Area code System 4
Norm and certification#1 EN-1504-2:2005, Structural concrete protection
Control laboratory#1 TECNALIA RESEARCH & INNOVATION
Norm and certification#2 EN 1186-1:2002 Foodstuff
Control laboratory#2 LGAI Technological Center S.A.
Norm and certification#3 RD 140/2003 Drinking water contact
Control laboratory#3 LGAI Technological Center S.A.
Revision date 10-10-2016
Product/system identification TECNOFLOOR Tw-3040, epoxy water-based resin
Use for flooring (industrial, commercial..)
Area code System 4
Norm and certification#1 EN-1504-2:2005, Structural concrete protection
Control laboratory#1 TECNALIA RESEARCH & INNOVATION
Norm and certification#2 EN 1186-1:2002 Foodstuff
Control laboratory#2 LGAI Technological Center S.A.
Norm and certification#3 RD 140/2003 Drinking water contact
Control laboratory#3 LGAI Technological Center S.A.
Revision date 10-10-2016
Product/system identification TECNOFLOOR Tw-3040, epoxy water-based resin
Use for flooring (industrial, commercial..)
Area code System 4
Norm and certification#1 EN-1504-2:2005, Structural concrete protection
Control laboratory#1 TECNALIA RESEARCH & INNOVATION
Norm and certification#2 EN 1186-1:2002 Foodstuff
Control laboratory#2 LGAI Technological Center S.A.
Norm and certification#3 RD 140/2003 Drinking water contact
Control laboratory#3 LGAI Technological Center S.A.
Revision date 10-10-2016
Product/system identification TECNOFLOOR Tw-3040, epoxy water-based resinProduct/system identification TECNOFLOOR Tw-3040, epoxy water-based resin
Use for flooring (industrial, commercial..)Use for flooring (industrial, commercial..)
Area code System 4Area code System 4
Norm and certification#1 EN-1504-2:2005, Structural concrete protectionNorm and certification#1 EN-1504-2:2005, Structural concrete protection
Control laboratory#1 TECNALIA RESEARCH & INNOVATIONControl laboratory#1 TECNALIA RESEARCH & INNOVATION
Norm and certification#2 EN 1186-1:2002 FoodstuffNorm and certification#2 EN 1186-1:2002 Foodstuff
Control laboratory#2 LGAI Technological Center S.A.Control laboratory#2 LGAI Technological Center S.A.
Norm and certification#3 RD 140/2003 Drinking water contactNorm and certification#3 RD 140/2003 Drinking water contact
Control laboratory#3 LGAI Technological Center S.A.Control laboratory#3 LGAI Technological Center S.A.
Revision date 10-10-2016 Revision date 10-10-2016
DECLARED PERFORMANCES
Density at 23ºC ISO 1675 ±1,30 g/cm³
Viscosity at 23ºC ISO 2555 1.500 cps
Solid content ISO 1768 ±65%
Hardness Shore D at 7 days DIN 53.505 >75
Adherence to concrete >2 MPa ( N/mm²)
Liquid water permeability EN 1062-3:2008 wË‚0,1 kg/m² * h0,5
Abrasion resistance ISO 5470-11999 Weight loss Ë‚3.000 mg
Falling weight test ISO 6272-1:2004 After impact, no cracking no flaking
Resistance to severe chemical attack EN 13529:2005 The hardness decreased by less than 50%
DECLARED PERFORMANCES
Density at 23ºC ISO 1675 ±1,30 g/cm³
Viscosity at 23ºC ISO 2555 1.500 cps
Solid content ISO 1768 ±65%
Hardness Shore D at 7 days DIN 53.505 >75
Adherence to concrete >2 MPa ( N/mm²)
Liquid water permeability EN 1062-3:2008 wË‚0,1 kg/m² * h0,5
Abrasion resistance ISO 5470-11999 Weight loss Ë‚3.000 mg
Falling weight test ISO 6272-1:2004 After impact, no cracking no flaking
Resistance to severe chemical attack EN 13529:2005 The hardness decreased by less than 50%
DECLARED PERFORMANCES
Density at 23ºC ISO 1675 ±1,30 g/cm³
Viscosity at 23ºC ISO 2555 1.500 cps
Solid content ISO 1768 ±65%
Hardness Shore D at 7 days DIN 53.505 >75
Adherence to concrete >2 MPa ( N/mm²)
Liquid water permeability EN 1062-3:2008 wË‚0,1 kg/m² * h0,5
Abrasion resistance ISO 5470-11999 Weight loss Ë‚3.000 mg
Falling weight test ISO 6272-1:2004 After impact, no cracking no flaking
Resistance to severe chemical attack EN 13529:2005 The hardness decreased by less than 50%
Density at 23ºC ISO 1675 ±1,30 g/cm³
Viscosity at 23ºC ISO 2555 1.500 cps
Solid content ISO 1768 ±65%
Hardness Shore D at 7 days DIN 53.505 >75
Adherence to concrete >2 MPa ( N/mm²)
Liquid water permeability EN 1062-3:2008 wË‚0,1 kg/m² * h0,5
Abrasion resistance ISO 5470-11999 Weight loss Ë‚3.000 mg
Falling weight test ISO 6272-1:2004 After impact, no cracking no flaking
Resistance to severe chemical attack EN 13529:2005 The hardness decreased by less than 50%
Density at 23ºC ISO 1675 ±1,30 g/cm³Density at 23ºC ISO 1675 ±1,30 g/cm³
Viscosity at 23ºC ISO 2555 1.500 cpsViscosity at 23ºC ISO 2555 1.500 cps
Solid content ISO 1768 ±65%Solid content ISO 1768 ±65%
Hardness Shore D at 7 days DIN 53.505 >75Hardness Shore D at 7 days DIN 53.505 >75
Adherence to concrete >2 MPa ( N/mm²) Adherence to concrete >2 MPa ( N/mm²)
Liquid water permeability EN 1062-3:2008 wË‚0,1 kg/m² * h0,5Liquid water permeability EN 1062-3:2008 wË‚0,1 kg/m² * h0,5
Abrasion resistance ISO 5470-11999 Weight loss Ë‚3.000 mgAbrasion resistance ISO 5470-11999 Weight loss Ë‚3.000 mg
Falling weight test ISO 6272-1:2004 After impact, no cracking no flakingFalling weight test ISO 6272-1:2004 After impact, no cracking no flaking
Resistance to severe chemical attack EN 13529:2005 The hardness decreased by less than 50%Resistance to severe chemical attack EN 13529:2005 The hardness decreased by less than 50%
![Page 2: DoP - DECLARATION of PERFORMANCE TECNOFLOOR Tw-3040 · Carbon dioxide permeability € EN 1062-6:2003 Sd>50 m. Water/vapor transmission properties ISO 7783:2012 Class I: SdË‚ 5](https://reader033.vdocuments.net/reader033/viewer/2022042918/5f5d3e8e8bc8aa564672b936/html5/thumbnails/2.jpg)
Carbon dioxide permeability EN 1062-6:2003 Sd>50 m.
Water/vapor transmission properties ISO 7783:2012 Class I: Sd˂ 5 m( permeable)
The performance given for this product or system, are agreed with the declared performance.This declaration of performance is issued under the responsibility of the manufacturer listed.
Tecnopol QA/QC Department
NOTICE: While all the information presented in this document is believed to be reliable and to represent the best available data on these products, do not constitute sales specifications. The product properties may be changed without notice. NOTHING HEREIN IS TO BE CONSTRUED AS A WARRANTY, EXPRESS OR OTHERWISE. IN ALL CASES, IT IS THE RESPONSIBILITY OF THE USER TO DETERMINE THE APPLICABILITY OF SUCH INFORMATION AND RECOMMENDATIONS AND THE SUITABILITY OF ANY PRODUCT FOR ITS OWN PARTICULAR PURPOSE. Liability of Tecnopol Sistemas and its affiliates for all claims is limited to the purchase price of the material. Products may be toxic and require special precautions in handling. User should obtain detailed information on toxicity, together with proper shipping, handling and storage procedures, and comply with all applicable safety and environmental standards. No freedom from any patents or other industrial or intellectual property rights is granted or to be inferred.
Carbon dioxide permeability EN 1062-6:2003 Sd>50 m.
Water/vapor transmission properties ISO 7783:2012 Class I: Sd˂ 5 m( permeable)
Carbon dioxide permeability EN 1062-6:2003 Sd>50 m.
Water/vapor transmission properties ISO 7783:2012 Class I: Sd˂ 5 m( permeable)
Carbon dioxide permeability EN 1062-6:2003 Sd>50 m.
Water/vapor transmission properties ISO 7783:2012 Class I: Sd˂ 5 m( permeable)
Carbon dioxide permeability EN 1062-6:2003 Sd>50 m.Carbon dioxide permeability EN 1062-6:2003 Sd>50 m.
Water/vapor transmission properties ISO 7783:2012 Class I: Sd˂ 5 m( permeable)Water/vapor transmission properties ISO 7783:2012 Class I: Sd˂ 5 m( permeable)
The performance given for this product or system, are agreed with the declared performance.This declaration of performance is issued under the responsibility of the manufacturer listed.The performance given for this product or system, are agreed with the declared performance.This declaration of performance is issued under the responsibility of the manufacturer listed.
Tecnopol QA/QC Department
NOTICE: While all the information presented in this document is believed to be reliable and to represent the best available data on these products, do not constitute sales specifications. The product properties may be changed without notice. NOTHING HEREIN IS TO BE CONSTRUED AS A WARRANTY, EXPRESS OR OTHERWISE. IN ALL CASES, IT IS THE RESPONSIBILITY OF THE USER TO DETERMINE THE APPLICABILITY OF SUCH INFORMATION AND RECOMMENDATIONS AND THE SUITABILITY OF ANY PRODUCT FOR ITS OWN PARTICULAR PURPOSE. Liability of Tecnopol Sistemas and its affiliates for all claims is limited to the purchase price of the material. Products may be toxic and require special precautions in handling. User should obtain detailed information on toxicity, together with proper shipping, handling and storage procedures, and comply with all applicable safety and environmental standards. No freedom from any patents or other industrial or intellectual property rights is granted or to be inferred.