double needle lockstitch machine (dnls) (2)
DESCRIPTION
TRANSCRIPT
DOUBLE NEEDLE LOCKSTITCH
(DNLS) MACHINE
-Ashima Singh(04)
Kamakshi Mathur(08)
Somya Tewari(16)
LOCKSTITCH A lockstitch is the
most common mechanical stitch made by a sewing machine.
The lockstitch uses two threads, an upper and a lower. Lockstitch is so named because the two threads, upper and lower, "lock" (entwine) together in the hole in the fabric which they pass through.
PRINCIPLE OF LOCKSTITCH MACHINE To make one stitch, the machine
lowers the threaded needle through the cloth into the bobbin area, where a rotating hook (or other hooking mechanism) catches the upper thread at the point just after it goes through the needle.
The hook mechanism carries the upper thread entirely around the bobbin case, so that it has made one wrap of the bobbin thread.
The take-up arm then pulls the excess upper thread (from the bobbin area) back to the top, forming the lockstitch. Then the feed dogs pull the material along one stitch length, and the cycle repeats.
TYPES OF LOCKSTITCH MACHINES There are two
types of lockstitch machines based on the number of sewing needles and bobbins present, they are: SNLS or Single
Needle Lockstitch Machine
DNLS or Double Needle Lockstitch Machine
DOUBLE NEEDLE LOCKSTITCH MACHINE
A double needle lockstitch machine works on the same principle as the SNLS machine while using two needles and two bobbins thus resulting in two parallel rows of lockstitch.
The distance between the two stitch lines depends upon the distance between the two needles on the needle bar which can be adjusted.
DNLS MACHINE CONTD.. When the stitch forms correctly equal
amounts of bobbin and needle thread are used. Upper and lower threads interlock in the centre of the fabric.
It is a poor choice in areas that must stretch, it has the least amount of elongation potential.
hence inappropriate to attach elastic or to sow knit fabrics or bias seams.
DNLS MACHINE CONTD.. Have more downtime
since they operate with a limited thread supply from bobbins which must be replaced as they run out.
The tightness of the interlocking stitch maybe a problem for operators when ripping is needed.
CHARACTERISTICS OF JUKI-LH-3120-7
2-needle, Bottom-feed, Lockstitch Machine with an automatic thread trimmer Low noise fast speed steady and enduring
especially when sewing underwear, jeans, coat's turning and decorative parts.
Synchronized feed of the needle bar and feed dog to avoid distraction.
Adopt inside oil line box to realize cycling oil supply
Double needle bar discrete design, easy for sewing turning , acute angle and direct stitch.
SPECIFICATIONS OF JUKI-LH-3120-7
SPECIFICATIONS OF JUKI-LH-3120-7
APPLICATIONS Sew box pockets on safari jackets,
light jeans and pyjamas. Topstitch front collar edges of safari
jackets etc.
• Sew pockets on coats• Sew skirt box pleats
Topstitch the collars of ladies’ wear Topstitch the cuffs of ladies’ wear Suitable for sewing Shirts,
Uniforms, Jeans and Women Underwear.
• The double needle lockstitch is the tightest and most secure stitch which makes it a good choice for stitching the inseam of trousers.
MACHINE FEATURES
Thread tension controller equipments to produce even
stitches
Thread trimming mechanism with twin
bobbins
Slide type presser foot capable of preventing
loose stitches
It belongs to special interlock sewing machine for heavy duty garment seaming, such as pants, jeans, work uniform and leisure clothes.
It is recommended for stitching overalls uniforms, jeans and decorative sewing on bags since it features synchronized feeding of needle bar and feed dog.
They are applicable to the ornamental seam of garments like jeans, skirts, overcoats and uniforms and the edge-pressing sewing.
Compact wiper
ADVANTAGES Lockstitch machines are versatile and can be
used for a variety of operations Compare to all other stitch types, this class
uses the least amount of thread and produces the flattest stitch.
it is reversible The double needle lockstitch is the tightest and
most secure stitch. It is the only stitch formation that can be
backstitched if the ends need to be secured. It is non-ravelling. Good hand Lies flat on the fabric
ADDITIONAL FEATURES When one of the needle bars is stopped,
it is held in place with added stability. The machine is able to run at the
highest rpm even when only one needle is in operation (the other needle bar is held idle).
This feature totally eliminates a fundamental problem of 2-needle bar lockstitch machines, which is how to hold either needle bar securely in an idle state.
Corner-teaching function
To start corner sewing, the operator need only press
the right or left stop switch. Then, the machine
automatically counts the number of stitches. This allows
the operator to concentrate on material handling.
Upon completion of corner sewing, the one-needle stop
state is automatically reset.Press the left-needle stop switch at point A to stop the left needle.2. Perform sewing with the left needle bar held idle until point B is reached.(The number of stitches is automatically stored in the memory)3. At point C, the left needle, which has been held in an idle state, is automatically released.
BIBLIOGRAPHY http://www.sewingmachinechina.com/3_1cm-
8420b.html
http://www.sewingmachinechina.com/3_2cm-8450b.html
http://encyclopedia2.thefreedictionary.com/Sewing+Machine
http://salestores.com/yamata13.html
http://mitsuyin.en.made-in-china.com/product/jbhJxqidLPVO/China-Split-Needle-Bar-Double-Needle-Lockstitch-Sewing-Machine-MY8845-.html
http://www.sewingmall.com/lockstitch/juki_2.htm
THANK YOU!