Download, Install, and Setup Panopto Recorder

 System Requirements

• Mac OSX version 10.6.0 or higher • Intel based - Dual core 2.0ghz / 2GB RAM (recommended) • Microsoft Silverlight (required for viewing recordings - http://www.microsoft.com/Silverlight/)

Step 1: Download and run the Mac version of Panopto Recorder

1. In an Internet browser, browse to http://stream.weill.cornell.edu/Panopto/Software/MacRecorder.zip. The Panopto Recorder installer file will automatically download.

2. On your computer, browse to the downloaded Panopto Recorder installer and double-click the icon to begin the installation process.

Step 2: Follow the on-screen prompts to complete the Panopto Recorder Installation

1. Choose the Destination for the installation. 2. This should be your primary hard drive. Click the "Continue" button. 3. Click the "Install" button to continue with the installation. 4. Provide the username and password for the account that has Administrative privileges on

your computer. 5. This is typically your Username and Password you use to login to your computer. 6. Click the "Install Software" button to proceed. The installation is complete. Click the "Close"

button to exit the installer.

 

Download, Install, and Setup Panopto Recorder

   

Step 3: Launch the Panopto Recorder Application Locate the Panopto Recorder application and double-click it to launch Panopto Recorder.

 

Download, Install, and Setup Panopto Recorder

  Step 4: Configure your account settings for Panopto Recorder The following settings should be input the first time you login to Panopto Recorder: Server: stream.weill.cornell.edu Providers: Panopto (If you do not see Panopto in the list of Providers, press the “Get Providers” button first) Login: cumc\CWID Password: Your CWID password Check the box to “Save Login and Password” and then press the “Log In” button to proceed.

Step 5: Verify your connection to the Panopto Server Once you’ve successfully logged in to the Panopto Server, you will see a message indicating “Logged into Server: stream.weill.cornell.edu”.

 

Download, Install, and Setup Panopto Recorder

   Step 6: Open Panopto Recorder Preferences Click the Panopto Recorder application title in the menu bar and choose the "Preferences..." menu item. You can optionally use the keyboard shortcut "Command + ," to open the Panopto Recorder preferences dialog screen.

Step 7: Set Panopto Recorder Preferences

1. By default, “Upload recordings automatically” will be checked. Uncheck this box so you can manually upload your final version of your recording.

2. Select “H.264 HD 720” from the Video Compression Options dropdown menu. 3. Click OK to save the change and close the Panopto Recorder Preferences dialog.

Note: You will only have to perform this Preferences adjustment once. The setting will be retained as long as Panopto Recorder remains installed on your computer.

 

Download, Install, and Setup Panopto Recorder

 

You are now ready to begin recording and upload the finished recording(s) to the Faculty Dropbox on the Panopto Server.