Scientech 4073P
0 - 30V / 2A Programmable DC Power Supply
Scientech 4073P Programmable Power Supply
is a versatile instrument with facility to
interfaced with PC. The front panel with keypad
and cursor, makes it user friendly.
It can be set to use as a Constant Voltage and
Constant Current source. With low ripple and
excellent Line and Load regulation, Scientech
4073P is fully protected against over load, over
voltage, over current, over heat and short
circuit .
Technical SpecificationsDC Output : 0 - 30 V, 2A
Current Limit : 0 - 2A
Setting Resolution : Voltage : 100 mV
Current : 10 mA
Internal Resistance : ≤ 10 mΩStability : ≤ 2.5 mV at 30 V / 2A
Recovery Time : ≤ 50ms
Load Regulation : ≤ (0.05 % +10 mV)
Line Regulation : ≤ (0.05 % +10 mV)
Temperature Coefficient : ≤ (0.05 % + 5 mV / °C)
Ripple & Noise : ≤ 1 mVrms
Display : LCD (backlit) for voltage and current
Accuracy : ±(1% +1 digit)
Over Range Indication : Glowing 'Over Current' LED indicates Overload
Interface : USB
Protective modes : Over load, over voltage, over current, over heat and short circuit protection.
General Information
Insulation : Between chasis & output terminals >10 MΩ at 500 V DC Between chasis & AC plug >50 MΩ at 500 V DC
Power Supply : 230 V, ±10 %, 50 / 60 Hz
Operating Temp. : 0 - 40°C, 80 % RH
Dimension (mm) : W 198 × D 278 × H 90
Weight : 4 Kg approximately
Product Tutorial : Online on www.ScientechLearning.com
Included Accessories : Mains cord, USB cable
Features
• DC 0 - 30 V / 2 A
• LCD screen for Voltage and Current readout
• Current limit exceed indication (LED)
• Step increment for Voltage
• User friendly settings of Voltage and Current using
keypad and encoder
• Constant Voltage source and Constant Current
source
• PC Interface USB
Programming modes
The Programmable Power Supply can be operated
through PC, parameters such as V-set, I-set, cursor and
output on/off can be set.
In programming mode, you can set the output voltage
linearly with respect to time in four different ways :
?Step mode
?Pulse mode
?RAMP mode
?Pulse width Mode
Different types of standard waveforms like RAMP, Pulse,
Square, can be generated with voltage with respect to time
defined by the users.
When Power Supply is operated in Manual Program. The
data can be entered through software key pad and Arbitrary
output can be generated.
The power supply can be programmed to perform set of
predefined output voltage with respect to time. These
voltages and time varying data can be fed through software,
manually.
The test can be conducted and observed at the output
terminals of the instrument
Scientech 4073P Programmable DC Power Supply
Software Window
Scientech 4073P Programmable DC Power Supply
Software Window
Scientech 4073P Programmable DC Power Supply
Software Window
Scientech 4073P
0 - 30V / 2A Programmable DC Power Supply
Scientech Technologies Pvt. Ltd.94, Electronic Complex, Pardesipura, Indore-452010, India. +91-731-4211100, [email protected], www.ScientechWorld.com, Helpline : +91 9893270301