Download - 1-Concepts of Measurement - 1
1
Fayoum University
Faculty of Engineering
Industrial Engineering Dept.
Dr. Emad M. SaadIndustrial Engineering Dept.
Faculty of EngineeringFayoum University
Concepts of Measurement
Lecture (1)
on
By
2014 - 2015
3
Lecture (1) – Mechanical Measurements – 2nd year – Industrial.
Course Syllabus
Corse Name: Mechanical Measurements – 2nd year – Industrial Dept.
Course Outline: 1. Engineering Measurements
2. Linear measurements
3. Measuring lengths
4. Measuring angles
5. Scale marginal
6. Comparison
7. Integrity and flatness tests and roughness and roundness
8. Measuring screw and gear
9. Overlap and optical devices overlap and its applications in metrology
10. Used in laser metrology
11. Three dimensions measurements
12. Measurement methods Computer Aided
4
Course Syllabus
Course prerequisites: 1. Mechanical Engineering Principles.
2. Physics Principles.
3. Statistics Principles.
Text Books: Lectures notes
References: Experimental Methods for Engineers - Eighth Edition - J.P. Holman
Evaluation: 1. Homework, attendance and assignments; equivalent 20%.
2. Mid exam; equivalent 20%.
3. Final exam; equivalent 60%.
Professor: Facebook: DrEmad Elasid
Email: [email protected]
Office Hours: Thursday 10:00 - 15:30
Wednesday 09:00 - 15:30 or by Appointment
5
Technical Terms
MeasurementMeasurement is the act, or the result, of a quantitative comparisonbetween a predetermined standard and an unknown magnitude.
RangeIt represents the highest possible value that can be measured by an
Scale sensitivityIt is defined as the ratio of a change in scale reading to thecorresponding change in pointer deflection. It actually denotes thesmallest change in the measured variable to which an instrumentresponds.
True or actual valueIt is the actual magnitude of a signal input to a measuring system which can only be approached and never evaluated.
6
Technical Terms
AccuracyIt is defined as the closeness with which the reading approaches anaccepted standard value or true value.
PrecisionIt is the degree of reproducibility among several independentmeasurements of the same true value under specified conditions. It isusually expressed in terms of deviation in measurement.
RepeatabilityIt is defined as the closeness of agreement among the number ofconsecutive measurement of the output for the same value of inputunder the same operating conditions. It may be specified in terms ofunits for a given period of time.
7
Technical Terms
ReliabilityIt is the ability of a system to perform and maintain its function in routinecircumstances. Consistency of a set of measurements or measuring instrumentoften used to describe a test.
Systematic ErrorsA constant uniform deviation of the operation of an instrument is known assystematic error. Instrumentational error, environmental error, Systematic errorand observation error are systematic errors.
Random ErrorsSome errors result through the systematic and instrument errors are reduced orat least accounted for. The causes of such errors are unknown and hence, theerrors are called random errors.
CalibrationCalibration is the process of determining and adjusting an instruments accuracyto make sure its accuracy is within the manufacturer’s specifications.
8
Technical Terms
ReliabilityIt is the ability of a system to perform and maintain its function in routinecircumstances. Consistency of a set of measurements or measuring instrumentoften used to describe a test.
Systematic ErrorsA constant uniform deviation of the operation of an instrument is known assystematic error. Instrumentational error, environmental error, Systematic errorand observation error are systematic errors.
Random ErrorsSome errors result through the systematic and instrument errors are reduced orat least accounted for. The causes of such errors are unknown and hence, theerrors are called random errors.
CalibrationCalibration is the process of determining and adjusting an instruments accuracyto make sure its accuracy is within the manufacturer’s specifications.
9
1. Direct method
2. Indirect method
3. Absolute or Fundamental method
4. Comparative method
5. Transposition method
6. Coincidence method
7. Deflection method
8. Complementary method
9. Contact method
10. Contactless method
Methods of Measurements
10
Generalized Measurement System
11
Measurement Standards
1. Calibration standards: Working standards of
industrial or governmental laboratories.
1. Metrology standards: Reference standards
of industrial or Governmental laboratories.
1. National standards: It includes prototype
and natural phenomenon of SI (Systems
International),
12
Factors affecting the accuracy of the Measuring System
1. Standard
2. Work piece
3. The inherent characteristics of Instrument
4. Person
5. Environment