Writing snippets of code that try to use methods (functions) from your program.
Each snippet should test one (and only one) function......by calling the function, then comparing what the function actually produced to what it was supposed to produce.
Running the test code thus verifies that (at least part of) your program is doing
what it’s supposed to. 2
Unit Testing (Definition)
public bool isPrime( int num){ /*implementation omitted*/}
Definition of a prime number:◦ “A prime number (or a prime) is a
natural number which has exactly two distinct natural number divisors: 1 and itself.” (Wikipedia) “The number 1 is by definition not a prime number”
3
Example Function To Test
public bool isPrime( int num){ /*implementation omitted*/}
Test with:◦ small primes (2, 3, 5, 7, 11)◦ large primes◦ non-primes (1, 4, 9, 12, 11*17)◦ zero◦ negative numbers
4
Example Test Cases
A free, open-source framework to help people create their own unit tests for any .Net language◦ We’ll use it for C#
Related to (“inspired by”) JUnit◦ JUnit is for Java testing
6
What is NUnit?
Make it quick and easy
to create unit tests,
and to run those tests,
and to get a list of which tests passed/failed.
7
NUnit’s Goal(s):
For this class, you will NOT be required to create your own Unit Tests.
You ARE required to write software that passes tests. The tests are provided to you, by the teacher
8
How do I Use NUnit?
You will download a starter project, which includes all the NUnit materials
Extract the .ZIP
9
How do I Use NUnit?
1010
Open the Solution (.SLN) file◦ Note multiple projects
There are three projects inside the starter solution:◦ 01_PCE_Test_Runner
This contains all the (instructor-provided) code that handles running the tests.
This includes running the test in the GUI, and running the auto-grading logic
◦ 02_PCE_ForTests This is where the units tests themselves are located
◦ 03_PCE_StudentCode This is where YOUR CODE must be put
Details: Solution Setup
Ignore anything except the RunTests.cs◦ You can set the ‘mode’ here (you’ll see this later)
01_PCE_Test_Runner
11
This project contains all the tests
TestHelpers.cs contains stuff that multiple tests, across multiple assignments, make use of◦ Input/output capturing code ◦ ‘Fuzzy’ comparisons
02_PCE_ForTests
12
PCE_Tests_To_Run.cs contains the actual tests – you’ll want to look in here for the details of each particular test.
02_PCE_ForTests
13
This is where YOUR CODE will be put.◦ There will be just one file (Student_Answers.cs)
◦ Your code (that you will hand in) always goes into Student_Answers.cs
03_PCE_Student_Code
14
If you want to experiment with a normal, console application, you do so by setting this project as the startup project, and then adding code to Main.
03_PCE_Student_Code
15
Make sure that “01_PCE_Test_Runner” is startup project◦ Right-click on it, and “Set as startup project” if it’s
not◦ Make sure that in RunTests.cs, the linedoThis = RUN_TEST_IN_GUI; is uncommented
In VS: DebugStart (Without) Debugging◦ (If either doesn’t work, email prof!)
In the NUnit test runner: click ‘Run’ button◦ Be careful about which test(s) you’ve selected
Details: GUI Test Runner
17
NUnit should auto-reload your code when you recompile◦ If it doesn’t, you can force it to reload:
File Reload Project orFile Reload Tests
You can then leave the test runner open, switch back to Visual Studio,change your program, and re-run your tests◦ Without having to quit-and-restart NUnit
Details: GUI Test Runner
18
Run the test(s) in the GUI Get the name of a test that is failing
1. Edit Find And Replace Find In Filesa) Type in the name of the failing test & go find it.
2. In 02_PCE_ForTests, in PCE_Tests_To_Run.csfind the test by hand
How to find a failing test
19
Note the tabs at the bottom: Errors And Failures:
◦ Lists out the exact error message when the test failed
◦ Tries to tell you where the failure occurred Tests Not Run:
◦ This should never happen (unless there’s an error with the test)
Test Output:◦ Anything you (or the test) Console.Writes will be
displayed here
Details: GUI Test Runner
20
[Test]
◦ Specifies that test will be automatically called by NUnit.
◦ The GUI automatically finds this test, and gets the name to display in the GUI
22
[Test] Attribute
[Category]◦ Used by the instructor to put a test into a grading
category [TestFixture], [TimeOut], [Description]
◦ Used to tell Nunit about tests
23
Attributes to ignore:
NUnit ‘magically’ finds the tests to run◦ Once the test starts, it runs just like normal code
We can tell NUnit to check that certain things are true at certain points, and fail if they’re not true◦ This is done using the Assert.That command
◦ If the function crashes (or throws exception), then the crash will be caught, prevented (normally), and the test will fail
24
Execution of a test
Assert.That( false, “msg” );
What this does:◦ If the first parameter (‘false’) is false,
then the test will fail, with the message “msg”
Test: Basic_Fail in the Nunit_Demo project
25
Basic (Failing) Test
bool correctAnswer = false;Assert.That(correctAnswer, “msg” );
This separates out the ‘is it correct?’ logic from the Assert statement
Notice that we can (and often will) use this pattern
◦ Test: Basic_Fail_2, Basic_Fail_3
26
More typical pattern
“Message” can work like Console.WriteLine:
int num = 10; Assert.That( num == 12, “num={0} isn’t what we expected”, num);
Test: Basic_Console_WriteLine
27
Using Assert Like Console.Write*
Typically, a test will call into your code, check the result, and then Assert that your answer is the same as the expected answer
Because the test code is in another project, you MUST make your classes PUBLIC in the StudentCode project
This will either have been done for you, or else we’ll cover how to create your own classes in C#
28
Calling Student Code
This is the first ‘real’ unit test Call into your codeCheck the answerPass (or fail) the test
Test: Basic_Unit_Test
29
Calling Student Code
If you’re having trouble getting a test to pass,
you can try adding print statements to your code,
so that as the program runs,
it tells you about what it’s doing
30
Debugging Strategy: Printing
Certain tests may redirect input, output◦ This means that they can ‘feed’ input to your
code, and ‘capture’ the output that you produce
Capturing Console.Out in the Test◦ Importance of the ‘fuzzy’ string comparison
Test-Supplied Console.In
32
Redirecting I/O
Using the TestHelpers software, the tests can capture output.◦ This is in the TestHelpers.cs file ; you’re welcome to
look at it, if you’re curious about how it works
Anything that you print (using Console.Write) can be captured
Test: Unit_Test_Console_WriteLine
33
Output (captured by the test)
The TestHelpers software also provides for a number of helpful routines, including ‘fuzzy’ comparisons◦ ‘Fuzzy’ for strings means case-insensitive, and
without (too much) regard for blank spaces
Test: Unit_Test_Console_WriteLine_Fuzzy
34
Fuzzy String Comparisons
The test can also assemble a string, which will be used as the input to your code.
Whenever you call Console.Readline, you will read everything up to the next newline◦ Enter key (Newline) in C#: \n
Example of input: ◦ “2\n3\nquit\n” is the same as typing
2<enter>3<enter>quit<enter>
Test: Unit_Test_Console_IO_Fuzzy35
Test-Supplied Input
public void Unit_Test_Values( [Values(-1, 0, 1, 10)]int valueToTry)
Tells NUnit to call this function four separate times:◦ once with valueToTry set to -1◦ once with valueToTry set to 0, ◦ once with valueToTry set to 1◦ once with valueToTry set to 10
Test: Unit_Test_Values
36
[Values] Attribute
public void Unit_Test_Values_2([Values(1, 10)]int a, [Values(2, 4)]int b)
Tells NUnit to call this function with ALL POSSIBLE COMBINATIONS OF a and b:◦ a = 1, b = 2◦ a = 1, b = 4◦ a = 10, b = 2◦ a = 10, b = 4
Test: Unit_Test_Values_2
37
[Values] Attribute - Combo
[TestCase( 1, 2)][TestCase( 10, 4)]public void Unit_Test_TestCase(int a, int b)
Tells NUnit to call this function with EACH TestCase: ◦ a = 1, b = 2◦ a = 10, b = 4
Test: Unit_Test_TestCase
38
[TestCase] Attribute
Notice that before each test, the method marked with [Setup] will be run
In the example test, we’ll use this to initialize x to be 10, y to be 20, and ex5 to refer to an object
Test: Unit_Test_Setup
39
Tests that use the [Setup] Attribute
Not all tests that you can see in the GUI are neccessarily graded
Failed tests are big, but passed tests are kinda small & on the bottom
Details: Autograder
41
Note that compromising the system in any way will get you a zero ◦ Cracking/changing/disabling tests
◦ WRITING CODE TO PASS A TEST, DESPITE NOT ACCOMPLISHING IT’S REAL GOAL Ex: A ‘FindInArray’ method that just asks “Did I get
asked to find the value 8? If so, return true”, so that it passes the test which asks “Is 8 in the array?”
Details: Autograder
42
Make sure that 03_PCE_StudentCode is the startup project◦ Right-click on the PROJECT, and choose “Set as
Startup Project” to make it the startup project
Put whatever code you want to into the main method.
Normal Console Program
44