1991-2001 HONDA PRELUDE PROJECTOR HEADLIGHTS INSTALLATION INSTRUCTIONS
TOOLS AND SUPPLIES REQUIRED
X" Drive Ratchet
10mm Socket
Phillips Screwdriver
Trim Pad Remover
Product Part Numbers:
LHP-PL97 JM-DP
LHP-PL97-DP
1. (5) 1 Omm bolts location
3. Remove phillips head screw
1997-2001 HONDA PRElUDE PROJECTOR HEADllGHTS INSTALLATION INSTRUCTIONS
2. Remove (5) 10mm bolts
4. (2) plastic clips location
5. Remove (2) plastic clips
7. Remove (2) plastic clips
9. Remove plastic clip located behind grill
6. Plastic clips location
8. Plastic clip locate behind grill
10. Remove the vehicles's front grill
11. (5) plastic clips location 12. Remove (5) plastic clips
14. Unplug the front bumper light
15. Remove the front bumper 16. 1 Omm bolt location
17. Remove 10mm bolt 18. 1 Omm bolt locate
19. Remove 1 Omm bolt
21. Remove 10mm bolt 22. Unplug the headlight harness
23. Unplug the light socket 24. Remove the headlight
26. Plug headlight harness into new headlight
27. Tighten the 10mm bolt locate above the headlight 28. Tighten the 1 Omm bolt
29. Tighten 1 Omm bolt 30. Tighten 1 Omm bolt
32. Replace the (5) plastic clips
33. Replace the front grill 34. Replace the plastic clips
35. Replace the plastic clips
37. Please repeat the ateps in order from 1 to 36 for theopposite side
36. Replace the plastic clip
38. The installation now is complete