Volkswagen Jetta GLI2012
ABOUT THE VEHICLE
APPLICATIONSSPEAKER NOTESDash Type:Aftermarket Type:A-Pillar:
Lower Door:Speaker Adapter:Speaker Harness:Speaker Assembly:Speaker Assembly:
Upper Door:Lower Door:Subwoofer:Speaker Adapter: Speaker Harness:Speaker Assembly:Speaker Assembly:
Front Speakers:
Rear Speakers: FACTORY COLOR CODES12v Battery (+):12v Accessory (+):12v Ground (-):12v Amp Turn On (+):Illumination:Left Front Speaker (+):Left Front Speaker (-):Right Front Speaker (+):Right Front Speaker (-):Left Rear Speaker (+):Left Rear Speaker (-):Right RRight Rear Speaker (-):
VolkswagenJetta GLI2012
Make:Model:Year:
STANDARD/OPTIONAL- AM/FM/CD/SAT/MP3/NAV Radio- Auxiliary 3.5mm Input Jack- Steering Wheel Controls- Bluetooth- iPod Control
Dimensions:
1 1/2”6 1/2”SAVW6TBATBA (4) Rivets Securing
Dimensions:
TBA6 1/2”TBASAVW6TBATBA (4) Rivets Securing
New Custom DashSingle/Double Din
Red/YellowDataBrownDataDataGreenBrownBlueBrown
A-PillarL: 1.62”
W: 1.62”D: 0.75”
Radio Harness:Antenna Adapter:Blue Fusion/Bluetooth:AUX / iPod Interface:
Aftermaket Kits:
Harness/Interface/Adapters:
Aftermarket Kit: VW2317B
VWA4BBT1000/BT1200TBA
Other:Auxilary / 3.5mm:USB Input:
On RadioN/A
Scosche Pro App
WhiteBrownYellowBrown
ear Speaker (+):
VW07SR
Speaker
Speaker
DoorL: 5.25”
W: 5.25”D: 2.75”
DoorL: 5.25”
W: 5.25”D: 2.75” Under Driver’s Seat
VEHICLE DISASSEMBLY
RADIO
Make:Model:Year:
VolkswagenJetta GLI2012
FRONT DOOR SPEAKERS
PRELIMINARY:Disconnect the negative battery cable.
1. Use PRT to unclip radio bezel 2. Use PRT to unclip the airbag light from the radio bezel, then
remove radio bezel. 3. Unscrew (4) T-20 torx securing the radio, unplug and remove.
REAR DOOR SPEAKERSA-PILLAR SPEAKERS
3. Unscrew (1) T-30 torx behind the panel just removed.4. Use PRT to unclip small panel from underneath armrest and
5. Unscrew (1) T-20 torx from behind the panel just removed.
6. Use PRT to unclip window switch panel, unplug and remove.
7. Unscrew (1) T-30 torx from behind the panel just removed.
Scosche Pro App
8. Use PRT to unclip the door panel, unplug and remove.9. Drill (4) rivets securing the speaker, unplug and remove.
panel.2. Use PRT to unclip long colored trim behind the door release and
3. Unscrew (1) T-30 torx behind the panel just removed.
5. Unscrew (1) T-30 torx from behind the panel just removed.6. Use PRT to unclip the door panel, unplug and remove.7. Drill (4) rivets securing the speaker, unplug and remove.
1. Remove door seal rubber gasket next to a-pillar.2. Use PRT to unclip the a-pillar, unplug and remove.
2. Use PRT to unclip long colored trim behind the door release and remove.
remove.
Volkswagen Jetta GLI2012
1. Unscrew (2) T-20 torx located on the bottom of the door panel.
5a. Driver’s side has additional lower piece and bolt under arm rest.
1. Unscrew (2) T-20 torx located along the bottom edge of the door
remove.
4. Unclip small cover under armrest.
VEHICLE DISASSEMBLY
SUBWOOFER
Make:Model:Year:
VolkswagenJetta GLI2012
AMPLIFIER
PRELIMINARY:Disconnect the negative battery cable.
1. Unscrew (5) T-25 torx securing the sub enclosure, unplug and remove enclosure.
unplug and remove.
IPODANTENNA
Scosche Pro App
1. Lift tabs on plastic cover to remove.2. Unscrew (2) 10mm bolts securing the amplifier, unplug and
Located in the glove box.
2. Unscrew (4) T-20 torx securing the subwoofer to the enclosure,
remove.
Volkswagen Jetta GLI2012