CONFIDENCE AT ANY SPEED3M™ Splittable Flying Splice Tape 8387
MAKE THE SPLICE.CONSISTENTLY.
GET THE BEST FROM YOUR PRESS.
Presses are running faster and faster, so reliability in
your tape is critical. Unsuccessful splices are not only
inefficient but can also be very costly. At 3M, we’re
passionate about solving challenges. For you, this
means you have access to the most innovative tools
and on-the-ground support to keep your projects
moving smoothly, on any surface, with confidence.
3M™ Splittable Flying Splice Tape 8387
Maximize speedKeep your presses running at
higher speeds so you can get
the best from your press with
consistent results.
Optimize surface adhesionSplice even the most challenging
substrates, such as:
• Polyethylene• Biaxially Oriented Polypropylene• Cast Polypropylene• Polyester• Aluminum Foil
Minimize contaminationSave cleanup time and money
by reducing tab debris and fiber
contamination on your central
impression (CI) drum and rollers,
as well as eliminating the hazards
of using glue.
ACCELERATE YOUR BUSINESS
PULL OUT ALL THE STOPS.
Full back adhesive
Lays flat for easier handling and there are
no small pieces that can break off and
stick to the CI drum
Fiber-free breakout mechanism
Takes imperfections out of the picture for
consistent print quality
We typically try to splice at speed, that’s why proper
tape is very important. Because, even when slowing
down you’re losing time and money.
— Print Manager
“”
Film, not paper
Stronger construction giving you greater
confidence for a clean, successful splice
Highly visible colors
Multiple colors make tape
more visible during conversion
Layers together
Under laminate (tabbing side)
Over laminate (splicing side)
Warranty and Limited Remedy: 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER EXPRESS OR IMPLIED WARRANTIES OR CONDITIONS, INCLUDING ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If the 3M product does not conform to this warranty, the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted.
Ideas that work. For over 35 years, 3M has been bringing fresh thinking to the flexographic printing industry. We
understand your needs and how unique the challenges are that you face with every run. Built upon
our determination to always find a better way, we are not satisfied until we have uncovered industry-
changing solutions that give you the speed, control and support that you need to be successful.
We are your single source for mounting and splicing products. Take the flexo challenge to see how 3M™ Cushion-Mount™ Plus
Plate Mounting Tapes, L-Series, and 3M™ Splittable Flying Splice
Tapes can improve your efficiency. Call 800-362-3550 or go
to www.3M.com/print and put our tapes to the test.
We aren’t just a bunch of scientists and engineers in a lab. We’re out in the field:
training, troubleshooting and, more importantly, listening. What keeps you up at night
keeps us working harder. 3M is committed to helping you maximize productivity and
increase profits with access to our greatest resource available: our people.
EXPECT THE BEST FROM US. IN FACT, YOU CAN COUNT ON IT.