![Page 1: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/1.jpg)
A Tutorial on Bayesian Optimization
Peter I. Frazier
July 10, 2018
Abstract
Bayesian optimization is an approach to optimizing objective functions that take a long time (min-utes or hours) to evaluate. It is best-suited for optimization over continuous domains of less than 20dimensions, and tolerates stochastic noise in function evaluations. It builds a surrogate for the objectiveand quantifies the uncertainty in that surrogate using a Bayesian machine learning technique, Gaussianprocess regression, and then uses an acquisition function defined from this surrogate to decide where tosample. In this tutorial, we describe how Bayesian optimization works, including Gaussian process re-gression and three common acquisition functions: expected improvement, entropy search, and knowledgegradient. We then discuss more advanced techniques, including running multiple function evaluationsin parallel, multi-fidelity and multi-information source optimization, expensive-to-evaluate constraints,random environmental conditions, multi-task Bayesian optimization, and the inclusion of derivative infor-mation. We conclude with a discussion of Bayesian optimization software and future research directionsin the field. Within our tutorial material we provide a generalization of expected improvement to noisyevaluations, beyond the noise-free setting where it is more commonly applied. This generalization isjustified by a formal decision-theoretic argument, standing in contrast to previous ad hoc modifications.
1 Introduction
Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization methods focused onsolving the problem
maxx∈A
f(x), (1)
where the feasible set and objective function typically have the following properties:
• The input x is in Rd for a value of d that is not too large. Typically d ≤ 20 in most successfulapplications of BayesOpt.
• The feasible set A is a simple set, in which it is easy to assess membership. Typically A is ahyper-rectangle {x ∈ Rd : ai ≤ xi ≤ bi} or the d-dimensional simplex {x ∈ Rd :
∑i xi = 1}. Later
(Section 5) we will relax this assumption.
• The objective function f is continuous. This will typically be required to model f using Gaussianprocess regression.
• f is “expensive to evaluate” in the sense that the number of evaluations that may be performed islimited, typically to a few hundred. This limitation typically arises because each evaluation takesa substantial amount of time (typically hours), but may also occur because each evaluation bearsa monetary cost (e.g., from purchasing cloud computing power, or buying laboratory materials),or an opportunity cost (e.g., if evaluating f requires asking a human subject questions who willtolerate only a limited number).
• f lacks known special structure like concavity or linearity that would make it easy to optimize usingtechniques that leverage such structure to improve efficiency. We summarize this by saying f is a“black box.”
• When we evaluate f , we observe only f(x) and no first- or second-order derivatives. This preventsthe application of first- and second-order methods like gradient descent, Newton’s method, or quasi-Newton methods. We refer to problems with this property as “derivative-free”.
• Through most of the article, we will assume f(x) is observed without noise. Later (Section 5) wewill allow f(x) to be obscured by stochastic noise. In almost all work on Bayesian optimization,noise is assumed independent across evaluations and Gaussian with constant variance.
1
arX
iv:1
807.
0281
1v1
[st
at.M
L]
8 J
ul 2
018
![Page 2: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/2.jpg)
• Our focus is on finding a global rather than local optimum.
We summarize these problem characteristics by saying that BayesOpt is designed for black-box derivative-free global optimization.
The ability to optimize expensive black-box derivative-free functions makes BayesOpt extremely ver-satile. Recently it has become extremely popular for tuning hyperparameters in machine learning al-gorithms, especially deep neural networks (Snoek et al., 2012). Over a longer period, since the 1960s,BayesOpt has been used extensively for designing engineering systems (Mockus, 1989; Jones et al., 1998;Forrester et al., 2008). BayesOpt has also been used to choose laboratory experiments in materials anddrug design (Negoescu et al., 2011; Frazier and Wang, 2016; Packwood, 2017), in calibration of envi-ronmental models (Shoemaker et al., 2007), and in reinforcement learning (Brochu et al., 2009; Lizotte,2008; Lizotte et al., 2007).
BayesOpt originated with the work of Kushner (Kushner, 1964), Zilinskas (Zilinskas, 1975; Mockuset al., 1978), and Mockus (Mockus, 1975; Mockus, 1989), but received substantially more attentionafter that work was popularized by Jones et al. (1998) and their work on the Efficient Global Opti-mization (EGO) algorithm. Following Jones et al. (1998), innovations developed in that same literatureinclude multi-fidelity optimization (Huang et al., 2006; Sobester et al., 2004), multi-objective optimiza-tion (Keane, 2006; Knowles, 2006; Mockus and Mockus, 1991), and a study of convergence rates (Calvin,1997; Calvin and Zilinskas, 2000; Calvin and Zilinskas, 2005; Calvin and Zilinskas, 1999). The observa-tion made by Snoek et al. (2012) that BayesOpt is useful for training deep neural networks sparked asurge of interest within machine learning, with complementary innovations from that literature includingmulti-task optimization (Swersky et al., 2013; Toscano-Palmerin and Frazier, 2018), multi-fidelity opti-mization specifically aimed at training deep neural networks (Klein et al., 2016), and parallel methods(Ginsbourger et al., 2007, 2010; Wang et al., 2016a; Wu and Frazier, 2016). Gaussian process regression,its close cousin kriging, and BayesOpt have also been studied recently in the simulation literature (Klei-jnen et al., 2008; Salemi et al., 2014; Mehdad and Kleijnen, 2018) for modeling and optimizing systemssimulated using discrete event simulation.
There are other techniques outside of BayesOpt that can be used to optimize expensive derivative-free black-box functions. While we do not review methods from this literature here in detail, many ofthem have a similar flavor to BayesOpt methods: they maintain a surrogate that models the objectivefunction, which they use to choose where to evaluate (Booker et al., 1999; Regis and Shoemaker, 2007b,a,2005). This more general class of methods is often called “surrogate methods.” Bayesian optimizationdistinguishes itself from other surrogate methods by using surrogates developed using Bayesian statistics,and in deciding where to evaluate the objective using a Bayesian interpretation of these surrogates.
We first introduce the typical form that Bayesian optimization algorithms take in Section 2. Thisform involves two primary components: a method for statistical inference, typically Gaussian process(GP) regression; and an acquisition function for deciding where to sample, which is often expectedimprovement. We describe these two components in detail in Sections 3 and 4.1. We then describethree alternate acquisition functions: knowledge-gradient (Section 4.2), entropy search, and predictiveentropy search (Section 4.3). These alternate acquisition functions are particularly useful in problemsfalling outside the strict set of assumptions above, which we call “exotic” Bayesian optimization problemsand we discuss in Section 5. These exotic Bayesian optimization problems include those with parallelevaluations, constraints, multi-fidelity evaluations, multiple information sources, random environmentalconditions, multi-task objectives, and derivative observations. We then discuss Bayesian optimizationand Gaussian process regression software in Section 6 and conclude with a discussion of future researchdirections in Section 7.
Other tutorials and surveys on Bayesian optimization include Shahriari et al. (2016); Brochu et al.(2009); Sasena (2002); Frazier and Wang (2016). This tutorial differs from these others in its coverageof non-standard or “exotic” Bayesian optimization problems. It also differs in its substantial emphasison acquisition functions, with less emphasis on GP regression. Finally, it includes what we believe is anovel analysis of expected improvement for noisy measurements, and argues that the acquisition functionpreviously proposed by Scott et al. (2011) is the most natural way to apply the expected improvementacquisition function when measurements are noisy.
2 Overview of BayesOpt
BayesOpt consists of two main components: a Bayesian statistical model for modeling the objectivefunction, and an acquisition function for deciding where to sample next. After evaluating the objectiveaccording to an initial space-filling experimental design, often consisting of points chosen uniformly at
2
![Page 3: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/3.jpg)
random, they are used iteratively to allocate the remainder of a budget of N function evaluations, asshown in Algorithm 1.
Algorithm 1 Basic pseudo-code for Bayesian optimization
Place a Gaussian process prior on fObserve f at n0 points according to an initial space-filling experimental design. Set n = n0.while n ≤ N do
Update the posterior probability distribution on f using all available dataLet xn be a maximizer of the acquisition function over x, where the acquisition function is computed usingthe current posterior distribution.Observe yn = f(xn).Increment n
end whileReturn a solution: either the point evaluated with the largest f(x), or the point with the largest posteriormean.
The statistical model, which is invariably a Gaussian process, provides a Bayesian posterior probabilitydistribution that describes potential values for f(x) at a candidate point x. Each time we observe f at anew point, this posterior distribution is updated. We discuss Bayesian statistical modeling using Gaussianprocesses in detail in Section 3. The acquisition function measures the value that would be generated byevaluation of the objective function at a new point x, based on the current posterior distribution overf . We discuss expected improvement, the most commonly used acquisition function, in Section 4.1, andthen discuss other acquisition functions in Section 4.2 and 4.3.
One iteration of BayesOpt from Algorithm 1 using GP regression and expected improvement isillustrated in Figure 1. The top panel shows noise-free observations of the objective function with bluecircles at three points. It also shows the output of GP regression. We will see below in Section 3 thatGP regression produces a posterior probability distribution on each f(x) that is normally distributedwith mean µn(x) and variance σ2
n(x). This is pictured in the figure with µn(x) as the solid red line, anda 95% Bayesian credible interval for f(x), µn(x) ± 1.96 × σn(x), as dashed red lines. The mean can beinterpreted as a point estimate of f(x). The credible interval acts like a confidence interval in frequentiststatistics, and contains f(x) with probability 95% according to the posterior distribution. The meaninterpolates the previously evaluated points. The credible interval has 0 width at these points, and growswider as we move away from them.
The bottom panel shows the expected improvement acquisition function that corresponds to thisposterior. Observe that it takes value 0 at points that have previously been evaluated. This is reason-able when evaluations of the objective are noise-free because evaluating these points provides no usefulinformation toward solving (1). Also observe that it tends to be larger for points with larger credibleintervals, because observing a point where we are more uncertain about the objective tends to be moreuseful in finding good approximate global optima. Also observe it tends to be larger for points withlarger posterior means, because such points tend to be near good approximate global optima.
We now discuss the components of BayesOpt in detail, first discussing GP regression in Section 3,then discuss acquisition functions in Section 4, starting with expected improvement in Section 4.1. Wethen discuss more sophisticated acquisition functions (knowledge gradient, entropy search, and predictiveentropy search) in Sections 4.2 and 4.3. Finally, we discuss extensions of the basic problem describedin Section 1 in Section 5, discussing problems with measurement noise, parallel function evaluations,constraints, multi-fidelity observations, and others.
3 Gaussian Process (GP) Regression
GP regression is a Bayesian statistical approach for modeling functions. We offer a brief introductionhere. A more complete treatment may be found in Rasmussen and Williams (2006).
We first describe GP regression, focusing on f ’s values at a finite collection of points x1, . . . , xk ∈ Rd.It is convenient to collect the function’s values at these points together into a vector [f(x1), . . . , f(xk)].Whenever we have a quantity that is unknown in Bayesian statistics, like this vector, we suppose that itwas drawn at random by nature from some prior probability distribution. GP regression takes this priordistribution to be multivariate normal, with a particular mean vector and covariance matrix.
3
![Page 4: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/4.jpg)
Figure 1: Illustration of BayesOpt, maximizing an objective function f with a 1-dimensional continuousinput. The top panel shows: noise-free observations of the objective function f at 3 points, in blue; anestimate of f(x) (solid red line); and Bayesian credible intervals (similar to confidence intervals) for f(x)(dashed red line). These estimates and credible intervals are obtained using GP regression. The bottom panelshows the acquisition function. Bayesian optimization chooses to sample next at the point that maximizesthe acquisition function, indicated here with an “x.”
We construct the mean vector by evaluating a mean function µ0 at each xi. We construct thecovariance matrix by evaluating a covariance function or kernel Σ0 at each pair of points xi, xj . Thekernel is chosen so that points xi, xj that are closer in the input space have a large positive correlation,encoding the belief that they should have more similar function values than points that are far apart.The kernel should also have the property that the resulting covariance matrix is positive semi-definite,regardless of the collection of points chosen. Example mean functions and kernels are discussed below inSection 3.1.
The resulting prior distribution on [f(x1), . . . , f(xk)] is,
f(x1:k) ∼ Normal (µ0(x1:k),Σ0(x1:k, x1:k)) , (2)
where we use compact notation for functions applied to collections of input points: x1:k indicates thesequence x1, . . . , xk, f(x1:k) = [f(x1), . . . , f(xk)], µ0(x1:k) = [µ0(x1), . . . , µ0(xk)], and Σ0(x1:k, x1:k) =[Σ0(x1, x1), . . . ,Σ0(x1, xk); . . . ; Σ0(xk, x1), . . . ,Σ0(xk, xk)].
Suppose we observe f(x1:n) without noise for some n and we wish to infer the value of f(x) at somenew point x. To do so, we let k = n + 1 and xk = x, so that the prior over [f(x1:n), f(x)] is given by(2). We may then compute the conditional distribution of f(x) given these observations using Bayes’rule (see details in Chapter 2.1 of Rasmussen and Williams (2006)),
f(x)|f(x1:n) ∼ Normal(µn(x), σ2n(x))
µn(x) = Σ0(x, x1:n)Σ0(x1:n, x1:n)−1 (f(x1:n)− µ0(x1:n)) + µ0(x)
σ2n(x) = Σ0(x, x)− Σ0(x, x1:n)Σ0(x1:n, x1:n)−1Σ0(x1:n, x).
(3)
This conditional distribution is called the posterior probability distribution in the nomenclature of
4
![Page 5: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/5.jpg)
Figure 2: Random functions f drawn from a Gaussian process prior with a power exponential kernel. Eachplot corresponds to a different value for the parameter α1, with α1 decreasing from left to right. Varyingthis parameter creates different beliefs about how quickly f(x) changes with x.
Bayesian statistics. The posterior mean µn(x) is a weighted average between the prior µ0(x) and anestimate based on the data f(x1:n), with a weight that depends on the kernel. The posterior varianceσ2n(x) is equal to the prior covariance Σ0(x, x) less a term that corresponds to the variance removed by
observing f(x1:n).Rather than computing posterior means and variances directly using (3) and matrix inversion, it is
typically faster and more numerically stable to use a Cholesky decomposition and then solve a linearsystem of equations. This more sophisticated technique is discussed as Algorithm 2.1 in Section 2.2 ofRasmussen and Williams (2006). Additionally, to improve the numerical stability of this approach ordirect computation using (3), it is often useful to add a small positive number like 10−6 to each elementof the diagonal of Σ0(x1:n, x1:n), especially when x1:n contains two or more points that are close together.This prevents eigenvalues of Σ0(x1:n, x1:n) from being too close to 0, and only changes the predictionsthat would be made by an infinite-precision computation by a small amount.
Although we have modeled f at only a finite number of points, the same approach can be used whenmodeling f over a continuous domain A. Formally a Gaussian process with mean function µ0 and kernelΣ0 is a probability distribution over the function f with the property that, for any given collection ofpoints x1:k, the marginal probability distribution on f(x1:k) is given by (2). Moreover, the argumentsthat justified (3) still hold when our prior probability distribution on f is a Gaussian process.
In addition to calculating the conditional distribution of f(x) given f(x1:n), it is also possible tocalculate the conditional distribution of f at more than one unevaluated point. The resulting distributionis multivariate normal, with a mean vector and covariance kernel that depend on the location of theunevaluated points, the locations of the measured points x1:n, and their measured values f(x1:n). Thefunctions that give entries in this mean vector and covariance matrix have the form required for a meanfunction and kernel described above, and the conditional distribution of f given f(x1:n) is a Gaussianprocess with this mean function and covariance kernel.
3.1 Choosing a Mean Function and Kernel
We now discuss the choice of kernel. Kernels typically have the property that points closer in theinput space are more strongly correlated, i.e., that if ||x − x′|| < ||x − x′′|| for some norm || · ||, thenΣ0(x, x′) > Σ0(x, x′′). Additionally, kernels are required to be positive semi-definite functions. Here wedescribe two example kernels and how they are used.
One commonly used and simple kernel is the power exponential or Gaussian kernel,
Σ0(x, x′) = α0 exp(−||x− x′||2
),
where ||x − x′||2 =∑di=1 αi(xi − x
′i)
2, and α0:d are parameters of the kernel. Figure 2 shows randomfunctions with a 1-dimensional input drawn from a Gaussian process prior with a power exponentialkernel with different values of α1. Varying this parameter creates different beliefs about how quicklyf(x) changes with x.
Another commonly used kernel is the Matern kernel,
Σ0(x, x′) = α021−ν
Γ(ν)
(√2ν||x− x′||
)νKν(√
2ν||x− x′||)
5
![Page 6: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/6.jpg)
where Kν is the modified Bessel function, and we have a parameter ν in addition to the parameters α0:d.We discuss choosing these parameters below in Section 3.2.
Perhaps the most common choice for the mean function is a constant value, µ0(x) = µ. When f isbelieved to have a trend or some application-specific parametric structure, we may also take the meanfunction to be
µ0(x) = µ+
p∑i=1
βiΨi(x), (4)
where each Ψi is a parametric function, and often a low-order polynomial in x.
3.2 Choosing Hyperparameters
The mean function and kernel contain parameters. We typically call these parameters of the priorhyperparameters. We indicate them via a vector η. For example, if we use a Matern kernel and aconstant mean function, η = (α0:d, ν, µ).
To choose the hyperparameters, three approaches are typically considered. The first is to find themaximum likelihood estimate (MLE). In this approach, when given observations f(x1:n), we calculate thelikelihood of these observations under the prior, P (f(x1:n)|η), where we modify our notation to indicateits dependence on η. This likelihood is a multivariate normal density. Then, in maximum likelihoodestimation, we set η to the value that maximizes this likelihood,
η = argmaxη
P (f(x1:n)|η)
The second approach amends this first approach by imagining that the hyperparameters η werethemselves chosen from a prior, P (η). We then estimate η by the maximum a posteriori (MAP) estimate(Gelman et al., 2014), which is the value of η that maximizes the posterior,
η = argmaxη
P (η|f(x1:n)) = argmaxη
P (f(x1:n)|η)P (η)
In moving from the first expression to the second we have used Bayes’ rule and then dropped a normal-ization constant
∫P (f(x1:n)|η′)P (η′) dη′ that does not depend on the quantity η being optimized.
The MLE is a special case of the MAP if we take the prior on the hyperparameters P (η) to be the(possibly degenerate) probability distribution that has constant density over the domain of η. The MAP isuseful if the MLE sometimes estimates unreasonable hyperparameter values, for example, correspondingto functions that vary too quickly or too slowly (see Figure 2). By choosing a prior that puts moreweight on hyperparameter values that are reasonable for a particular problem, MAP estimates canbetter correspond to the application. Common choices for the prior include the uniform distribution(for preventing estimates from falling outside of some pre-specified range), the normal distribution (forsuggesting that the estimates fall near some nominal value without setting a hard cutoff), and the log-normal and truncated normal distributions (for providing a similar suggestion for positive parameters).
The third approach is called the fully Bayesian approach. In this approach, we wish to compute theposterior distribution on f(x) marginalizing over all possible values of the hyperparameters,
P (f(x) = y|f(x1:n)) =
∫P (f(x) = y|f(x1:n), η)P (η|f(x1:n)) dη (5)
This integral is typically intractable, but we can approximate it through sampling:
P (f(x) = y|f(x1:n)) ≈ 1
J
J∑j=1
P (f(x) = y|f(x1:n), η = ηj) (6)
where (ηj : j = 1, . . . , J) are sampled from P (η|f(x1:n)) via an MCMC method, e.g., slice sampling (Neal,2003). MAP estimation can be seen as an approximation to fully Bayesian inference: if we approximatethe posterior P (η|f(x1:n)) by a point mass at the η that maximizes the posterior density, then inferencewith the MAP recovers (5).
6
![Page 7: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/7.jpg)
4 Acquisition Functions
Having surveyed Gaussian processes, we return to Algorithm 1 and discuss the acquisition function usedin that loop. We focus on the setting described in Section 1 with noise-free evaluations, which we callthe “standard” problem, and then discuss noisy evaluations, parallel evaluations, derivative observations,and other “exotic” extensions in Section 5.
The most commonly used acquisition function is expected improvement, and we discuss it first, inSection 4.1. Expected improvement performs well and is easy to use. We then discuss the knowledgegradient (Section 4.2), entropy search and predictive entropy search (Section 4.3) acquisition functions.These alternate acquisition functions are most useful in exotic problems where an assumption made byexpected improvement, that the primary benefit of sampling occurs through an improvement at the pointsampled, is no longer true.
4.1 Expected Improvement
The expected improvement acquisition function is derived by a thought experiment. Suppose we areusing Algorithm 1 to solve (1), in which xn indicates the point sampled at iteration n and yn indicatesthe observed value. Assume that we may only return a solution that we have evaluated as our finalsolution to (1). Also suppose for the moment that we have no evaluations left to make, and must returna solution based on those we have already performed. Since we observe f without noise, the optimalchoice is the previously evaluated point with the largest observed value. Let f∗n = maxm≤n f(xm) be thevalue of this point, where n is the number of times we have evaluated f thus far.
Now suppose in fact we have one additional evaluation to perform, and we can perform it anywhere.If we evaluate at x, we will observe f(x). After this new evaluation, the value of the best point we haveobserved will either be f(x) (if f(x) ≥ f∗n) or f∗n (if f(x) ≤ f∗n). The improvement in the value of thebest observed point is then f(x) − f∗n if this quantity is positive, and 0 otherwise. We can write thisimprovement more compactly as [f(x)− f∗n]+, where a+ = max(a, 0) indicates the positive part.
While we would like to choose x so that this improvement is large, f(x) is unknown until after theevaluation. What we can do, however, is to take the expected value of this improvement and choose xto maximize it. We define the expected improvement as,
EIn(x) := En[[f(x)− f∗n]+
](7)
Here, En[·] = E[·|x1:n, y1:n] indicates the expectation taken under the posterior distribution given eval-uations of f at x1, . . . xn. This posterior distribution is given by (3): f(x) given x1:n, y1:n is normallydistributed with mean µn(x) and variance σ2
n(x).The expected improvement can be evaluated in closed form using integration by parts, as described
in Jones et al. (1998) or Clark (1961). The resulting expression is
EIn(x) = [∆n(x)]+ + σn(x)ϕ
(∆n(x)
σn(x)
)− |∆n(x)|Φ
(∆n(x)
σn(x)
), (8)
where ∆n(x) := µn(x) − f∗n is the expected difference in quality between the proposed point x and theprevious best.
The expected improvement algorithm then evaluates at the point with the largest expected improve-ment,
xn+1 = argmax EIn(x), (9)
breaking ties arbitrarily. This algorithm was first proposed by Mockus (Mockus, 1975) but was popu-larized by Jones et al. (1998). The latter article also used the name “Efficient Global Optimization” orEGO.
Implementations use a variety of approaches for solving (9). Unlike the objective f in our originaloptimization problem (1), EIn(x) is inexpensive to evaluate and allows easy evaluation of first- and second-order derivatives. Implementations of the expected improvement algorithm can then use a continuousfirst- or second-order optimization method to solve (9). For example, one technique that has workedwell for the author is to calculate first derivatives and use the quasi-Newton method L-BFGS-B (Liu andNocedal, 1989).
Figure 3 shows the contours of EIn(x) in terms of ∆n(x) and the posterior standard deviation σn(x).EIn(x) is increasing in both ∆n(x) and σn(x). Curves of ∆n(x) versus σn(x) with equal EI show how EIbalances between evaluating at points with high expected quality (high ∆n(x))) versus high uncertainty(high σn(x)). In the context of optimization, evaluating at points with high expected quality relative
7
![Page 8: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/8.jpg)
Figure 3: Contour plot of EI(x), the expected improvement (8), in terms of ∆n(x) (the expected differencein quality between the proposed point and the best previously evaluated point) and the posterior standarddeviation σn(x). Blue indicates smaller values and red higher ones. The expected improvement is increasingin both quantities, and curves of ∆n(x) versus σn(x) with equal EI define an implicit tradeoff betweenevaluating at points with high expected quality (high ∆n(x) versus high uncertainty (high σn(x)).
to the previous best point is valuable because good approximate global optima are likely to reside atsuch points. On the other hand, evaluating at points with high uncertainty is valuable because it teachesabout the objective in locations where we have little knowledge and which tend to be far away from wherewe have previously measured. A point that is substantially better than one we have seen previously mayvery well reside there.
Figure 1 shows EI(x) in the bottom panel. We see this tradeoff, with the largest expected improvementoccurring where the posterior standard deviation is high (far away from previously evaluated points),and where the posterior mean is also high. The smallest expected improvement is 0, at points where wehave previously evaluated. The posterior standard deviation is 0 at this point, and the posterior meanis necessarily no larger than the best previously evaluated point. The expected improvement algorithmwould evaluate next at the point indicated with an x, where EI is maximized.
Choosing where to evaluate based on a tradeoff between high expected performance and high un-certainty appears in other domains, including multi-armed bandits Mahajan and Teneketzis (2008) andreinforcement learning Sutton and Barto (1998), and is often called the “exploration vs. exploitationtradeoff” (Kaelbling et al., 1996).
4.2 Knowledge Gradient
The knowledge-gradient acquisition function is derived by revisiting the assumption made in EI’s deriva-tion that we are only willing to return a previously evaluated point as our final solution. That assumptionis reasonable when evaluations are noise-free and we are highly risk averse, but if the decision-maker iswilling to tolerate some risk then she might be willing to report a final solution that has some uncertaintyattached to it. Moreover, if evaluations have noise (discussed below in Section 5) then the final solutionreported will necessarily have uncertain value because we can hardly evaluate it an infinite number oftimes.
We replace this assumption by allowing the decision-maker to return any solution she likes, evenif it has not been previously evaluated. We also assume risk-neutrality (Berger, 2013), i.e., we value arandom outcome X according to its expected value. The solution that we would choose if we were to stopsampling after n samples would be the one with the largest µn(x) value. This solution (call it x∗, sinceit approximates the global optimum x∗) would have value f(x∗). f(x∗) is random under the posterior,and has conditional expected value µn(x∗) = maxx′ µn(x′) =: µ∗n.
On the other hand, if we were to take one more sample at x, we would obtain a new posteriordistribution with posterior mean µn+1(·). This posterior mean would be computed via (3), but includingthe additional observation xn+1, yn+1. If we were to report a final solution after this sample, its expected
8
![Page 9: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/9.jpg)
value under the new posterior distribution would be µ∗n+1 := maxx′ µn+1(x′). Thus, the increase inconditional expected solution value due to sampling is µ∗n+1 − µ∗n.
While this quantity is unknown before we sample at xn+1, we can compute its expected value giventhe observations at x1, . . . , xn that we have. We call this quantity the knowledge gradient (KG) formeasuring at x,
KGn(x) := En [µ∗n+1 − µ∗n|xn+1 = x] . (10)
Using the knowledge gradient as our acquisition function then leads us to sample at the point with largestKGn(x), argmaxx KGn(x).
This algorithm was first proposed in Frazier et al. (2009) for GP regression over discrete A, buildingon earlier work (Frazier et al., 2008) that proposed the same algorithm for Bayesian ranking and selection(Chick and Inoue, 2001) with an independent prior. (Bayesian ranking and selection is similar to Bayesianoptimization, except that A is discrete and finite, observations are necessarily noisy, and the prior istypically independent across x.)
The conceptually simplest way to compute the KG acquisition function is via simulation, as shownin Algorithm 2. Within a loop, this algorithm simulates one possible value for the observation yn+1 thatmay result from taking evaluation n + 1 at a designated x. Then it computes what the maximum ofthe new posterior mean µ∗n+1 would be if that value for yn+1 were the one that actually resulted fromthe measurement. It then subtracts µ∗n to obtain the corresponding increase in solution quality. Thiscomprises one loop of the algorithm. It iterates this loop many (J) times and averages the differencesµ∗n+1 − µ∗n obtained from different simulated values for yn+1 to estimate the KG acquisition functionKGn(x). As J grows large, this estimate converges to KGn(x).
In principle, this algorithm can be used to evaluate KGn(x) within a derivative-free simulation-basedoptimization method to optimize the KG acquisition function. However, optimizing noisy simulation-based functions without access to derivatives is challenging. Frazier et al. (2009) proposed discretizingA and calculating (10) exactly using properties of the normal distribution. This works well for low-dimensional problems but becomes computationally burdensome in higher dimensions.
Algorithm 2 Simulation-based computation of the knowledge-gradient factor KGn(x).
Let µ∗n = maxx′ µn(x′).(When calculating µ∗n and µ∗n+1 below, use a nonlinear optimization method like L-BFGS.)for j = 1 to J : do
Generate yn+1 ∼ Normal(µn(x), σ2n(x)). (Equivalently, Z ∼ Normal(0, 1) and yn+1 = µn(x) + σn(x)Z.)
Set µn+1(x′;x, yn+1) to the posterior mean at x′ via (3) with (x, yn+1) as the last observation.µ∗n+1 = maxx′ µn+1(x′;x, yn+1).
∆(j) = µ∗n+1 − µ∗n.end forEstimate KGn(x) by 1
J
∑Jj=1 ∆(j).
Overcoming this challenge with dimensionality, Wu and Frazier (2016) proposed1 a substantiallymore efficient and scalable approach, based on multi-start stochastic gradient ascent. Stochastic gradientascent (Robbins and Monro, 1951; Blum, 1954) is an algorithm for finding local optima of functions usedsuch unbiased gradient estimates widely used in machine learning (Bottou, 2012). Multistart stochasticgradient ascent (Martı et al., 2016) runs multiple instances of stochastic gradient ascent from differentstarting points and selects the best local optimum found as an approximate global optimum.
We summarize this approach for maximizing the KG acquisition function in Algorithm 3. The al-gorithm iterates over starting points, indexed by r, and for each maintains a sequence of iterates x
(r)t ,
indexed by t, that converges to a local optimum of the KG acquisition function. The inner loop over trelies on a stochastic gradient G, which is a random variable whose expected value is equal to the gradientof the KG acquisition function with respect to where we sample, evaluated at the current iterate x
(r)t−1.
We obtain the next iterate by taking a step in the direction of the stochastic gradient G. The size of thisstep is determined by the magnitude of G and a decreasing step size αt. Once stochastic gradient ascenthas run for T iterations for each start, Algorithm 3 uses simulation (Algorithm 2) to evaluate the KGacquisition function for the final point obtained from each starting point, and selects the best one.
1This approach was proposed in the context of BayesOpt with parallel function evaluations, but can also be used in thesetting considered here in which we perform one evaluation at a time.
9
![Page 10: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/10.jpg)
Algorithm 3 Efficient method for finding x with the largest KGn(x), based on multistart stochastic gradientascent. Takes as input a number of starts R, a number of iterations T for each pass of stochastic gradientascent, a parameter a used to define a stepsize sequence, and a number of replications J . Suggested inputparameters: R = 10, T = 102, a = 4, J = 103.
for r = 1 to R doChoose x
(r)0 uniformly at random from A.
for t = 1 to T doLet G be the stochastic gradient estimate of ∇KGn(x
(r)t−1) from Algorithm 4.
Let αt = a/(a+ t).
x(r)t = x
(r)t−1 + αtG.
end forEstimate KGn(x
(r)T ) using Algorithm 2 and J replications.
end forReturn the x
(r)T with the largest estimated value of KGn(x
(r)T ).
This stochastic gradient G used by the inner loop of Algorithm 3 is calculated via Algorithm 4. Thisalgorithm is based on the idea that we can exchange gradient and expectation (under sufficient regularityconditions) to write,
∇KGn(x) = ∇En [µ∗n+1 − µ∗n|xn+1 = x] . = En [∇µ∗n+1|xn+1 = x] ,
where we have noted that µ∗n does not depend on x. This approach is called infinitesimal perturbationanalysis (Ho et al., 1983). Thus, to construct a stochastic gradient it is sufficient to sample ∇µ∗n+1.In other words, imagine first sampling Z in the inner loop in Algorithm 2, and then holding Z fixedwhile calculating the gradient of µ∗n+1 with respect to x. To calculate this gradient, see that µ∗n+1 is amaximum over x′ of µn+1(x′;x, yn+1) = µn+1(x′;x, µn(x) +σn(x)Z). This is a maximum over collectionof functions of x. The envelope theorem (Milgrom and Segal, 2002) tells us (under sufficient regularityconditions) that the gradient with respect to x of a maximum of a collection of functions of x is givensimply by first finding the maximum in this collection, and then differentiating this single function withrespect to x. In our setting, we apply this by letting x∗ be the x′ maximizing µn+1(x′;x, µn(x)+σn(x)Z),and then calculating the gradient of µn+1(x∗;x, µn(x)+σn(x)Z) with respect to x while holding x∗ fixed.In other words,
∇maxx′
µn+1(x′;x, µn(x) + σn(x)Z) = ∇µn+1(x∗;x, µn(x) + σn(x)Z),
where we remind the reader that ∇ refers to taking the gradient with respect to x, here and throughout.This is summarized in Algorithm 4.
Algorithm 4 Simulation of unbiased stochastic gradients G with E[G] = ∇KGn(x). This stochastic gradientcan then be used within stochastic gradient ascent to optimize the KG acquisition function.
for j = 1 to J doGenerate Z ∼ Normal(0, 1)yn+1 = µn(x) + σn(x)Z.Let µn+1(x′;x, yn+1) = µn+1(x′;x, µn(x) + σn(x)Z) be the posterior mean at x′ computed via (3) with(x, yn+1) as the last observation.Solve maxx′ µn+1(x′;x, yn+1), e.g., using L-BFGS. Let x∗ be the maximizing x′.Let G(j) be the gradient of µn+1(x∗;x, µn(x) + σn(x)Z) with respect to x, holding x∗ fixed.
end forEstimate ∇KGn(x) by G = 1
J
∑Jj=1G
(j).
Unlike expected improvement, which only considers the posterior at the point sampled, the KGacquisition considers the posterior over f ’s full domain, and how the sample will change that posterior.KG places a positive value on measurements that cause the maximum of the posterior mean to improve,even if the value at the sampled point is not better than the previous best point. This provides a smallperformance benefit in the standard BayesOpt problem with noise-free evaluations (Frazier et al., 2009),
10
![Page 11: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/11.jpg)
and provides substantial performance improvements in problems with noise, multi-fidelity observations,derivative observations, the need to integrate over environmental conditions, and other more exoticproblem features (Section 5). In these alternate problems, the value of sampling comes not through animprovement in the best solution at the sampled point, but through an improvement in the maximumof the posterior mean across feasible solutions. For example, a derivative observation may show thatthe function is increasing in a particular direction in the vicinity of the sampled point. This may causethe maximum of the posterior mean to be substantially larger than the previous maximum, even ifthe function value at the sampled point is worse than the best previously sampled point. When suchphenomenon are first-order, KG tends to significantly outperform EI (Wu et al., 2017; Poloczek et al.,2017; Wu and Frazier, 2016; Toscano-Palmerin and Frazier, 2018).
4.3 Entropy Search and Predictive Entropy Search
The entropy search (ES) (Hennig and Schuler, 2012) acquisition function values the information we haveabout the location of the global maximum according to its differential entropy. ES seeks the point to eval-uate that causes the largest decrease in differential entropy. (Recall from, e.g., Cover and Thomas (2012),that the differential entropy of a continuous probability distribution p(x) is
∫p(x) log(p(x)) dx, and that
smaller differential entropy indicates less uncertainty.) Predictive entropy search (PES) (Hernandez-Lobato et al., 2014) seeks the same point, but uses a reformulation of the entropy reduction objectivebased on mutual information. Exact calculations of PES and ES would give equivalent acquisition func-tions, but exact calculation is not typically possible, and so the difference in computational techniquesused to approximate the PES and ES acquisition functions creates practical differences in the samplingdecisions that result from the two approaches. We first discuss ES and then PES.
Let x∗ be the global optimum of f . The posterior distribution on f at time n induces a probabilitydistribution for x∗. Indeed, if the domain A were finite, then we could represent f over its domain by avector (f(x) : x ∈ A), and x∗ would correspond to the largest element in this vector. The distribution ofthis vector under the time-n posterior distribution would be multivariate normal, and this multivariatenormal distribution would imply the distribution of x∗. When A is continuous, the same ideas apply,where x∗ is a random variable whose distribution is implied by the Gaussian process posterior on f .
With this understanding, we represent the entropy of the time-n posterior distribution on x∗ withthe notation H(Pn(x∗)). Similarly, H(Pn(x∗|x, f(x))) represents the entropy of what the time-n + 1posterior distribution on x∗ will be if we observe at x and see f(x). This quantity depends on the valueof f(x) observed. Then, the entropy reduction due to sampling x can be written,
ESn(x) = H(Pn(x∗))− Ef(x) [H(Pn(x∗|f(x)))] . (11)
In the second term, the subscript in the outer expectation indicates that we take the expectation over f(x).Equivalently, this can be written
∫ϕ(y;µn(x), σ2
n(x))H(Pn(x∗|f(x) = y)) dy where ϕ(y;µn(x), σ2n(x)) is
the normal density with mean µn(x) and variance σ2n(x).
Like KG, ES and PES below are influenced by how the measurement changes the posterior over thewhole domain, and not just on whether it improves over an incumbent solution at the point sampled.This is useful when deciding where to sample in exotic problems, and it is here that ES and PES canprovide substantial value relative to EI.
While ES can be computed and optimized approximately (Hennig and Schuler, 2012), doing so ischallenging because (a) the entropy of the maximizer of a Gaussian process is not available in closedform; (b) we must calculate this entropy for a large number of y to approximate the expectation in (11);and (c) we must then optimize this hard-to-evaluate function. Unlike KG, there is no known method forcomputing stochastic gradients that would simplify this optimization.
PES offers an alternate approach for computing (11). This approach notes that the reduction in theentropy of x∗ due to measuring f(x) is equal to the mutual information between f(x) and x∗, which isin turn equal to the reduction in the entropy of f(x) due to measuring x∗. This equivalence gives theexpression
PESn(x) = ESn(x) = H(Pn(f(x)))− Ex∗ [H(Pn(f(x)|x∗))] (12)
Here, the subscript in the expectation in the second term indicates that the expectation is taken over x∗.Unlike ES, the first term in the PES acquisition function, H(Pn(f(x))), can be computed in closed
form. The second term must still be approximated: Hernandez-Lobato et al. (2014) provides a methodfor sampling x∗ from the posterior distribution, and a method for approximating H(Pn(f(x)|x∗)) usingexpectation propagation (Minka, 2001). This evaluation method may then be optimized by a methodfor derivative-free optimization via simulation.
11
![Page 12: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/12.jpg)
4.4 Multi-Step Optimal Acquisition Functions
We can view the act of solving problem (1) as a sequential decision-making problem (Ginsbourger andRiche, 2010; Frazier, 2012), in which we sequentially choose xn, and observe yn = f(xn), with the choiceof xn depending on all past observations. At the end of these observations, we then receive a rewardthat might be equal to the value of the best point observed, maxm≤N f(xm), as it was in the analysis ofEI, or could be equal to the value f(x∗) of the objective at some new point x∗ chosen based on theseobservations as in the analysis of KG, or it could be the entropy of the posterior distribution on x∗ as inES or PES.
By construction, the EI, KG, ES, and PES acquisition functions are optimal when N = n+ 1, in thesense of maximizing the expected reward under the posterior. However, they are no longer obviouslyoptimal when N > n+ 1. In principle, it is possible to compute a multi-step optimal acquisition functionthat would maximize expected reward for general N via stochastic dynamic programming (Dynkin andYushkevich, 1979), but the so-called curse of dimensionality (Powell, 2007) makes it extremely challengingto compute this multi-step optimal acquisition function in practice.
Nevertheless, the literature has recently begun to deploy approximate methods for computing this so-lution, with attempts including Lam et al. (2016); Ginsbourger and Riche (2010); Gonzalez et al. (2016).These methods do not yet seem to be in a state where they can be deployed broadly for practical prob-lems, because the error and extra cost introduced in solving stochastic dynamic programming problemsapproximately often overwhelms the benefit that considering multiple steps provides. Nevertheless, givenconcurrent advances in reinforcement learning and approximate dynamic programming, this representsa promising and exciting direction for Bayesian optimization.
In addition, there are other problem settings closely related to the one most commonly consideredby Bayesian optimization where it is possible to compute multi-step optimal algorithms. For example,Cashore et al. (2016) and Xie and Frazier (2013) use problem structure to efficiently compute multi-stepoptimal algorithms for certain classes of Bayesian feasibility determination problems, where we wishto sample efficiently to determine whether f(x) is above or below a threshold for each x. Similarly,Waeber et al. (2013), building on Jedynak et al. (2012), computes the multi-step optimal algorithm for aone-dimensional stochastic root-finding problem with an entropy objective. While these optimal multi-step methods are only directly applicable to very specific settings, they offer an opportunity to study theimprovement possible more generally by going from one-step optimal to multi-step optimal. Surprisingly,in these settings, existing acquisition functions perform almost as well as the multi-step optimal algorithm.For example, experiments conducted in Cashore et al. (2016) show the KG acquisition function is within98% of optimal in the problems computed there, and Waeber et al. (2013) shows that the entropy searchacquisition function is multi-step optimal in the setting considered there. Generalizing from these results,it could be that the one-step acquisition functions are close enough to optimal that further improvementis not practically meaningful, or it could be that multi-step optimal algorithms will provide substantiallybetter performance in yet-to-be-identified practically important settings.
5 Exotic Bayesian Optimization
Above we described methodology for solving the “standard” Bayesian optimization problem describedin Section 1. This problem assumed a feasible set in which membership is easy to evaluate, such as ahyperrectangle or simplex; a lack of derivative information; and noise-free evaluations.
While there are quite a few applied problems that meet all of the assumptions of the standard problem,there are even more where one or more of these assumptions are broken. We call these “exotic” problems.Here, we describe some prominent examples and give references for more detailed reading. (Although wediscuss noisy evaluations in this section on exotic problems, they are substantially less exotic than theothers considered, and are often considered to be part of the standard problem.)
Noisy Evaluations GP regression can be extended naturally to observations with independent nor-mally distributed noise of known variance (Rasmussen and Williams, 2006). This adds a diagonal termwith entries equal to the variance of the noise to the covariance matrices in (3). In practice, this varianceis not known, and so the most common approach is to assume that the noise is of common variance andto include this variance as a hyperparameter. It is also possible to perform inference assuming that thevariance changes with the domain, by modeling the log of the variance with a second Gaussian process(Kersting et al., 2007).
The KG, ES, and PES acquisition functions apply directly in the setting with noise and they retain
12
![Page 13: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/13.jpg)
their one-step optimality properties. One simply uses the posterior mean of the Gaussian process thatincludes noise.
Direct use of the EI acquisition function presents conceptual challenges, however, since the “improve-ment” that results from a function value is no longer easily defined, and f(x) in (7) is no longer observed.Authors have employed a variety of heuristic approaches, substituting different normal distributions forthe distribution of f(x) in (7), and typically using the maximum of the posterior mean at the previouslyevaluated points in place of f∗n. Popular substitutes for the distribution of f(x) include the distributionof µn+1(x), the distribution of yn+1, and continuing to use the distribution of f(x) even though it isnot observed. Because of these approximations, KG can outperform EI substantially in problems withsubstantial noise (Wu and Frazier, 2016; Frazier et al., 2009).
As an alternative approach to applying EI when measurements are noisy, Scott et al. (2011) considersnoisy evaluations under the restriction made in the derivation of EI: that the reported solution needs tobe a previously reported point. It then finds the one-step optimal place to sample under this assumption.Its analysis is similar to that used to derive the KG policy, except that we restrict x∗ to those pointsthat have been evaluated.
Indeed, if we were to report a final solution after n measurements, it would be the point among x1:nwith the largest value of µn(x), and it would have conditional expected value µ∗∗n = maxi=1,...,n µn(xi).If we were to take one more sample at xn+1 = x, it would have conditional expected value under thenew posterior of µ∗∗n+1 = maxi=1,...,n+1 µn+1(xi). Taking the expected value of the difference, the valueof sampling at x is
En [µ∗∗n+1 − µ∗∗n |xn+1 = x] . (13)
Unlike the case with noise-free evaluations, this sample may cause µn+1(xi) to differ from µn(xi) fori ≤ n, necessitating a more complex calculation than in the noise-free setting (but a simpler calculationthan for the KG policy). A procedure for calculating this quantity and its derivative is given in Scottet al. (2011). While we can view this acquisition function as an approximation to the KG acquisitionfunction as Scott et al. (2011) does (they call it the KGCP acquisition function), we argue here that itis the most natural generalization of EI’s assumptions to the case with noisy measurements.
Parallel Evaluations Performing evaluations in parallel using multiple computing resources allowobtaining multiple function evaluations in the time that would ordinarily be required to obtain just onewith sequential evaluations. For this reason, parallel function evaluations is a conceptually appealing wayto solve optimization problems in less time. EI, KG, ES, and PES can all be extended in a straightforwardway to allow parallel function evaluations. For example, EI becomes
EIn(x(1:q)) = En
[[ maxi=1,...,q
f(x(i))− f∗n]+], (14)
where x(1:q) = (x(1), . . . , x(q)) is a collection of points at which we are proposing to evaluate (Ginsbourgeret al., 2007). Parallel EI (also called multipoints EI by Ginsbourger et al. (2007)) then proposes to evaluatethe set of points that jointly maximize this criteria. This approach can also be used asynchronously, wherewe hold fixed those x(i) currently being evaluated and we allocate our idle computational resources byoptimizing over their corresponding x(j).
Parallel EI (14) and other parallel acquisition functions are more challenging to optimize than theiroriginal sequential versions from Section 4. One innovation is the Constant Liar approximation to theparallel EI acquisition function (Ginsbourger et al., 2010), which chooses x(i) sequentially by assumingthat f(x(j)) for j < i have been already observed, and have values equal to a constant (usually theexpected value of f(x(j))) under the posterior. This substantially speeds up computation. Expanding onthis, Wang et al. (2016a) showed that infinitesimal perturbation analysis can produce random stochasticgradients that are unbiased estimates of ∇EIn(x(1:q)), which can then be used in multistart stochasticgradient ascent to optimize (14). This method has been used to implement the parallel EI procedurefor as many as q = 128 parallel evaluations. Computational methods for parallel KG were developedby Wu and Frazier (2016), and are implemented in the Cornell MOE software package discussed inSection 6. That article follows the stochastic gradient ascent approach described above in Section 4.2,which generalizes well to the parallel setting.
13
![Page 14: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/14.jpg)
Constraints In the problem posed in Section 1, we assumed that the feasible set was a simple one inwhich it was easy to assess membership. The literature has also considered the more general problem,
maxx
f(x)
subject to gi(x) ≥ 0, i = 1, . . . , I,
where the gi are as expensive to evaluate as f . EI generalizes naturally to this setting when f and gican be evaluated without noise: improvement results when the evaluated x is feasible (gi(x) ≥ 0 for allx) and f(x) is better than the best previously evaluated feasible point. This was proposed in Section 4of Schonlau et al. (1998) and studied independently by Gardner et al. (2014). PES has also been studiedfor this setting (Hernandez-Lobato et al., 2015).
Multi-Fidelity and Multi-Information Source Evaluations In multi-fidelity optimization,rather than a single objective f , we have a collection of information sources f(x, s) indexed by s. Here,s controls the “fidelity”, with lower s giving higher fidelity, and f(x, 0) corresponding to the originalobjective. Increasing the fidelity (decreasing s) gives a more accurate estimate of f(x, 0), but at a highercost c(s). For example, x might describe the design of an engineering system, and s the size of a meshused in solving a partial differential equation that models the system. Or, s might describe the timehorizon used in a steady-state simulation. Authors have also recently considered optimization of neuralnetworks, where s indexes the number of iterations or amount of data used in training a machine learningalgorithm (Swersky et al., 2014; Klein et al., 2016). Accuracy is modeled by supposing that f(x, s) isequal to f(x, 0) and is observed with noise whose variance λ(s) increases with s, or by supposing thatf(x, s) provides deterministic evaluations with f(x, s+1)−f(x, s) modeled by a mean 0 Gaussian processthat varies with x. Both settings can be modeled via a Gaussian process on f , including both x and sas part of the modeled domain.
The overarching goal is to solve maxx f(x, 0) by observing f(x, s) at a sequence of points and fidelities(xn, sn) with total cost
∑Nn=1 c(sn) less than some budget B. Work on multi-fidelity optimization includes
Huang et al. (2006); Sobester et al. (2004); Forrester et al. (2007); McLeod et al. (2017); Kandasamyet al. (2016).
In the more general problem of multi-information source optimization, we relax the assumption thatthe f(·, s) are ordered by s in terms of accuracy and cost. Instead, we simply have a function f taking adesign input x and an information source input s, with f(x, 0) being the objective, and f(x, s) for s 6= 0being observable with different biases relative to the objective, different amounts of noise, and differentcosts.
For example, x might represent the design of an aircraft’s wing, f(x, 0) the predicted performance ofthe wing under an accurate but slow simulator, and f(x, s) for s = 1, 2 representing predicted performanceunder two inexpensive approximate simulators making different assumptions. It may be that f(x, 1) isaccurate for some regions of the search space and substantially biased in others, with f(x, 2) beingaccurate in other regions. In this setting, the relative accuracy of f(x, 1) vs. f(x, 2) depends on x. Workon multi-information source optimization includes Lam et al. (2015); Poloczek et al. (2017).
EI is difficult to apply directly in these problems because evaluating f(x, s) for s 6= 0 never provides animprovement in the best objective function value seen, max{f(xn, 0) : sn = 0}. Thus, a direct translationof EI to this setting causes EI = 0 for s 6= 0, leading to measurement of only the highest fidelity. Forthis reason, the EI-based method from Lam et al. (2015) uses EI to select xn assuming that f(x, 0) willbe observed (even if it will not), and uses a separate procedure to select s. KG, ES, and PES can beapplied directly to these problems, as in Poloczek et al. (2017).
Random Environmental Conditions and Multi-Task Bayesian Optimization Closelyrelated to multi-information source optimization is the pair of problems
maxx
∫f(x,w)p(w) dw,
maxx
∑w
f(x,w)p(w),
where f is expensive to evaluate. These problems appear in the literature with a variety of names:optimization with random environmental conditions (Chang et al., 2001) in statistics, multi-task Bayesianoptimization (Swersky et al., 2013) in machine learning, along with optimization of integrated responsefunctions (Williams et al., 2000) and optimization with expensive integrands (Toscano-Palmerin andFrazier, 2018).
14
![Page 15: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/15.jpg)
Rather than taking the objective∫f(x,w)p(w) dw as our unit of evaluation, a natural approach is
to evaluate f(x,w) at a small number of w at an x of interest. This gives partial information aboutthe objective at x. Based on this information, one can explore a different x, or resolve the current xwith more precision. Moreover, by leveraging observations at w for a nearby x, one may already havesubstantial information about a particular f(x,w) reducing the need to evaluate it. Methods that acton this intuition can substantially outperform methods that simply evaluate the full objective in eachevaluation via numerical quadrature or a full sum (Toscano-Palmerin and Frazier, 2018).
This pair of problems arise in the design of engineering systems and biomedical problems, such as jointreplacements (Chang et al., 2001) and cardiovascular bypass grafts (Xie et al., 2012), where f(x,w) is theperformance of design x under environmental condition w as evaluated by some expensive-to-evaluatecomputational model, p(w) is some simple function (e.g., the normal density) describing the frequencywith which condition w occurs, and our goal is to optimize average performance. It also arises in machinelearning, in optimizing cross-validation performance. Here, we divide our data into chunks or “folds”indexed by w, and f(x,w) is the test performance on fold w of a machine learning model trained withoutdata from this fold.
Methods in this area include KG for noise-free (Xie et al., 2012) and general problems (Toscano-Palmerin and Frazier, 2018), PES (Swersky et al., 2013), and modifications of EI (Groot et al., 2010;Williams et al., 2000). As in multi-information source optimization, the unmodified EI acquisitionfunction is inappropriate here because observing f(x,w) does not provide an observation of the objective(unless all w′ 6= w have already been observed at that x) nor a strictly positive improvement. Thus,Groot et al. (2010) and Williams et al. (2000) use EI to choose x as if it we did observe the objective,and then use a separate strategy for choosing w.
Derivative Observations Finally, we discuss optimization with derivatives. Observations of∇f(x),optionally with normally distributed noise, may be incorporated directly into GP regression (Rasmussenand Williams, 2006, Sect 9.4). Lizotte (2008) proposed using gradient information in this way in Bayesianoptimization, together with the EI acquisition function, showing an improvement over BFGS (Liu andNocedal, 1989). EI is unchanged by a proposed observation of ∇f(x) in addition to f(x) as compared toits value when observing f(x) alone. (Though, if previous derivative observations have contributed to thetime n posterior, then that time-n posterior will differ from what it would be if we had observed only f(x).)Thus, EI does not take advantage of the availability of derivative information to, for example, evaluateat points far away from previously evaluated ones where derivative information would be particularlyuseful. A KG method alleviating this problem was proposed by Wu et al. (2017). In other related workin this area, Osborne et al. (2009) proposed using gradient information to improve conditioning of thecovariance matrix in GP regression, and Ahmed et al. (2016) proposed a method for choosing a singledirectional derivative to retain when observing gradients to improve the computational tractability ofGP inference.
6 Software
There are a variety of codes for Bayesian optimization and Gaussian process regression. Several ofthese Gaussian process regression and Bayesian optimization packages are developed together, with theBayesian optimization package making use of the Gaussian process regression package. Other packages arestandalone, providing only either Gaussian process regression support or Bayesian optimization support.We list here several of the most prominent packages, along with URLs that are current as of June 2018.
• DiceKriging and DiceOptim are packages for Gaussian process regression and Bayesian optimizationrespectively, written in R. They are described in detail in Roustant et al. (2012) and are availablefrom CRAN via https://cran.r-project.org/web/packages/DiceOptim/index.html.
• GPyOpt (https://github.com/SheffieldML/GPyOpt) is a python Bayesian optimization librarybuilt on top of the Gaussian process regression library GPy (https://sheffieldml.github.io/GPy/) both written and maintained by the machine learning group at Sheffield University.
• Metrics Optimization Engine (MOE, https://github.com/Yelp/MOE) is a Bayesian optimizationlibrary in C++ with a python wrapper that supports GPU-based computations for improved speed.It was developed at Yelp by the founders of the Bayesian optimization startup, SigOpt (http://sigopt.com). Cornell MOE (https://github.com/wujian16/Cornell-MOE) is built on MOE withchanges that make it easier to install, and support for parallel and derivative-enabled knowledge-gradient algorithms.
15
![Page 16: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/16.jpg)
• Spearmint (https://github.com/HIPS/Spearmint), with an older version under a different licenseavailable at https://github.com/JasperSnoek/spearmint, is a python Bayesian optimization li-brary. Spearmint was written by the founders of the Bayesian optimization startup Whetlab, whichwas acquired by Twitter in 2015 Perez (2015).
• DACE (Design and Analysis of Computer Experiments) is a Gaussian process regression librarywritten in MATLAB, available at http://www2.imm.dtu.dk/projects/dace/. Although it was lastupdated in 2002, it remains widely used.
• GPFlow (https://github.com/GPflow/GPflow) and GPyTorch (https://github.com/cornellius-gp/gpytorch) are python Gaussian process regression library built on top of Tensorflow (https://www.tensorflow.org/) and PyTorch (https://pytorch.org/) respectively.
• laGP (https://cran.r-project.org/web/packages/laGP/index.html) is an R package for Gaus-sian process regression and Bayesian optimization with support for inequality constraints.
7 Conclusion and Research Directions
We have introduced Bayesian optimization, first discussing GP regression, then the expected improve-ment, knowledge gradient, entropy search, and predictive entropy search acquisition functions. We thendiscussed a variety of exotic Bayesian optimization problems: those with noisy measurements; paral-lel evaluations; constraints; multiple fidelities and multiple information sources; random environmentalconditions and multi-task BayesOpt; and derivative observations.
Many research directions present themselves in this exciting field. First, there is substantial roomfor developing a deeper theoretical understanding of Bayesian optimization. As described in Section 4.4,settings where we can compute multi-step optimal algorithms are extremely limited. Moreover, whilethe acquisition functions we currently use in practice seem to perform almost as well as optimal multi-step algorithms when we can compute them, we do not currently have finite-time bounds that explaintheir near-optimal empirical performance, nor do we know whether multi-step optimal algorithms canprovide substantial practical benefit in yet-to-be-understood settings. Even in the asymptotic regime,relatively little is known about rates of convergence for Bayesian optimization algorithms: while Bull(2011) establishes a rate of convergence for expected improvement when it is combined with periodicuniform sampling, it is unknown whether removing uniform sampling results in the same or differentrate.
Second, there is room to build Bayesian optimization methods that leverage novel statistical ap-proaches. Gaussian processes (or variants thereof such as Snoek et al. (2014) and Kersting et al. (2007))are used in most work on Bayesian optimization, but it seems likely that classes of problems exist wherethe objective could be better modeled through other approaches. It is both of interest to develop newstatistical models that are broadly useful, and to develop models that are specifically designed for appli-cations of interest.
Third, developing Bayesian optimization methods that work well in high dimensions is of great prac-tical and theoretical interest. Directions for research include developing statistical methods that identifyand leverage structure present in high-dimensional objectives arising in practice, which has been pur-sued by recent work including Wang et al. (2013, 2016b); Kandasamy et al. (2015). See also Shan andWang (2010). It is also possible that new acquisition functions may provide substantial value in highdimensional problems.
Fourth, it is of interest to develop methods that leverage exotic problem structure unconsideredby today’s methods, in the spirit of the Section 5. It may be particularly fruitful to combine suchmethodological development with applying Bayesian optimization to important real-world problems, asusing methods in the real world tends to reveal unanticipated difficulties and spur creativity.
Fifth, substantial impact in a variety of fields seems possible through application of Bayesian opti-mization. One set of application areas where Bayesian optimization seems particularly well-positionedto offer impact is in chemistry, chemical engineering, materials design, and drug discovery, where prac-titioners undertake design efforts involving repeated physical experiments consuming years of effort andsubstantial monetary expense. While there is some early work in these areas (Ueno et al., 2016; Frazierand Wang, 2016; Negoescu et al., 2011; Seko et al., 2015; Ju et al., 2017) the number of researchersworking in these fields aware of the power and applicability of Bayesian optimization is still relativelysmall.
16
![Page 17: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/17.jpg)
Acknowledgments
While writing this tutorial, the author was supported by the Air Force Office of Scientific Research andthe National Science Foundation (AFOSR FA9550-15-1-0038 and NSF CMMI-1254298, CMMI-1536895DMR-1719875, DMR-1120296). The author would also like to thank Roman Garnett, whose suggestionshelped shape the discussion of expected improvement with noise, and several anonymous reviewers.
References
Ahmed, M. O., Shahriari, B., and Schmidt, M. (2016). Do we need “harmless” Bayesian optimizationand “first-order” Bayesian optimization. In Neural Information Processing Systems 2016 Workshopon Bayesian Optimization.
Berger, J. O. (2013). Statistical Decision Theory and Bayesian Analysis. Springer Science & BusinessMedia.
Blum, J. R. (1954). Multidimensional stochastic approximation methods. The Annals of MathematicalStatistics, pages 737–744.
Booker, A., Dennis, J., Frank, P., Serafini, D., Torczon, V., and Trosset, M. (1999). A rigorous frameworkfor optimization of expensive functions by surrogates. Structural and Multidisciplinary Optimization,17(1):1–13.
Bottou, L. (2012). Stochastic gradient descent tricks. In Montavon, G., Orr, G. B., and Muller, K. R.,editors, Neural Networks: Tricks of the Trade, pages 421–436. Springer.
Brochu, E., Cora, M., and de Freitas, N. (2009). A tutorial on bayesian optimization of expensivecost functions, with application to active user modeling and hierarchical reinforcement learning.Technical Report TR-2009-023, Department of Computer Science, University of British Columbia.arXiv:1012.2599.
Bull, A. D. (2011). Convergence rates of efficient global optimization algorithms. Journal of MachineLearning Research, 12(Oct):2879–2904.
Calvin, J. (1997). Average performance of a class of adaptive algorithms for global optimization. TheAnnals of Applied Probability, 7(3):711–730.
Calvin, J. and Zilinskas, A. (2005). One-dimensional global optimization for observations with noise.Computers & Mathematics with Applications, 50(1-2):157–169.
Calvin, J. and Zilinskas, A. (1999). On the convergence of the P-algorithm for one-dimensional globaloptimization of smooth functions. Journal of Optimization Theory and Applications, 102(3):479–495.
Calvin, J. and Zilinskas, A. (2000). One-dimensional P-algorithm with convergence rate O(n-3+δ) forsmooth functions. Journal of Optimization Theory and Applications, 106(2):297–307.
Cashore, J. M., Kumarga, L., and Frazier, P. I. (2016). Multi-step Bayesian optimization for one-dimensional feasibility determination. arXiv preprint arXiv:1607.03195.
Chang, P. B., Williams, B. J., Bhalla, K. S. B., Belknap, T. W., Santner, T. J., Notz, W. I., and Bartel,D. L. (2001). Design and analysis of robust total joint replacements: finite element model experimentswith environmental variables. Journal of Biomechanical Engineering, 123(3):239–246.
Chick, S. E. and Inoue, K. (2001). New two-stage and sequential procedures for selecting the bestsimulated system. Operations Research, 49(5):732–743.
Clark, C. E. (1961). The greatest of a finite set of random variables. Operations Research, 9(2):145–162.
Cover, T. M. and Thomas, J. A. (2012). Elements of Information Theory. John Wiley & Sons.
Dynkin, E. and Yushkevich, A. (1979). Controlled Markov Processes. Springer, New York.
Forrester, A., Sobester, A., and Keane, A. (2008). Engineering Design via Surrogate Modelling: APractical Guide. Wiley, West Sussex, UK.
17
![Page 18: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/18.jpg)
Forrester, A. I., Sobester, A., and Keane, A. J. (2007). Multi-fidelity optimization via surrogate modelling.In Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences,volume 463, pages 3251–3269. The Royal Society.
Frazier, P., Powell, W., and Dayanik, S. (2009). The knowledge-gradient policy for correlated normalbeliefs. INFORMS Journal on Computing, 21(4):599–613.
Frazier, P. I. (2012). Tutorial: Optimization via simulation with bayesian statistics and dynamic pro-gramming. In Laroque, C., Himmelspach, J., Pasupathy, R., Rose, O., and Uhrmacher, A. M., editors,Proceedings of the 2012 Winter Simulation Conference Proceedings, pages 79–94, Piscataway, NewJersey. Institute of Electrical and Electronics Engineers, Inc.
Frazier, P. I., Powell, W. B., and Dayanik, S. (2008). A knowledge-gradient policy for sequential infor-mation collection. SIAM Journal on Control and Optimization, 47(5):2410–2439.
Frazier, P. I. and Wang, J. (2016). Bayesian optimization for materials design. In Lookman, T., Alexander,F. J., and Rajan, K., editors, Information Science for Materials Discovery and Design, pages 45–75.Springer.
Gardner, J. R., Kusner, M. J., Xu, Z. E., Weinberger, K. Q., and Cunningham, J. P. (2014). Bayesianoptimization with inequality constraints. In ICML, pages 937–945.
Gelman, A., Carlin, J. B., Stern, H. S., Dunson, D. B., Vehtari, A., and Rubin, D. B. (2014). BayesianData Analysis, volume 2. CRC Press Boca Raton, FL.
Ginsbourger, D., Le Riche, R., and Carraro, L. (2007). A multi-points criterion for deterministic par-allel global optimization based on kriging. In International Conference on Nonconvex Programming,NCP07, Rouen, France.
Ginsbourger, D., Le Riche, R., and Carraro, L. (2010). Kriging is well-suited to parallelize optimization.In Tenne, Y. and Goh, C. K., editors, Computational Intelligence in Expensive Optimization Problems,volume 2, pages 131–162. Springer.
Ginsbourger, D. and Riche, R. (2010). Towards Gaussian process-based optimization with finite timehorizon. In Giovagnoli, A., Atkinson, A., Torsney, B., and May, C., editors, mODa 9–Advances inModel-Oriented Design and Analysis, pages 89–96. Springer.
Gonzalez, J., Osborne, M., and Lawrence, N. (2016). GLASSES: Relieving the myopia of bayesianoptimisation. In Artificial Intelligence and Statistics, pages 790–799.
Groot, P., Birlutiu, A., and Heskes, T. (2010). Bayesian monte carlo for the global optimization ofexpensive functions. In ECAI, pages 249–254.
Hennig, P. and Schuler, C. J. (2012). Entropy search for information-efficient global optimization. Journalof Machine Learning Research, 13:1809–1837.
Hernandez-Lobato, J. M., Gelbart, M. A., Hoffman, M. W., Adams, R. P., and Ghahramani, Z. (2015).Predictive entropy search for bayesian optimization with unknown constraints. In Proceedings of the32nd International Conference on International Conference on Machine Learning-Volume 37, pages1699–1707. JMLR. org.
Hernandez-Lobato, J. M., Hoffman, M. W., and Ghahramani, Z. (2014). Predictive entropy search forefficient global optimization of black-box functions. In Advances in neural information processingsystems, pages 918–926.
Ho, Y.-C., Cao, X., and Cassandras, C. (1983). Infinitesimal and finite perturbation analysis for queueingnetworks. Automatica, 19(4):439–445.
Huang, D., Allen, T., Notz, W., and Miller, R. (2006). Sequential kriging optimization using multiple-fidelity evaluations. Structural and Multidisciplinary Optimization, 32(5):369–382.
Jedynak, B., Frazier, P. I., and Sznitman, R. (2012). Twenty questions with noise: Bayes optimal policiesfor entropy loss. Journal of Applied Probability, 49(1):114–136.
18
![Page 19: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/19.jpg)
Jones, D. R., Schonlau, M., and Welch, W. J. (1998). Efficient global optimization of expensive black-boxfunctions. Journal of Global Optimization, 13(4):455–492.
Ju, S., Shiga, T., Feng, L., Hou, Z., Tsuda, K., and Shiomi, J. (2017). Designing nanostructures forphonon transport via Bayesian optimization. Physical Review X, 7.
Kaelbling, L. P., Littman, M. L., and Moore, A. W. (1996). Reinforcement learning: A survey. Journalof Artificial Intelligence Research, 4:237–285.
Kandasamy, K., Dasarathy, G., Oliva, J. B., Schneider, J., and Poczos, B. (2016). Gaussian processbandit optimisation with multi-fidelity evaluations. In Advances in Neural Information ProcessingSystems, pages 992–1000.
Kandasamy, K., Schneider, J., and Poczos, B. (2015). High dimensional bayesian optimisation andbandits via additive models. In International Conference on Machine Learning, pages 295–304.
Keane, A. (2006). Statistical improvement criteria for use in multiobjective design optimization. AIAAJournal, 44(4):879–891.
Kersting, K., Plagemann, C., Pfaff, P., and Burgard, W. (2007). Most likely heteroscedastic gaussianprocess regression. In Proceedings of the 24th International Conference on Machine learning, pages393–400. ACM.
Kleijnen, J. P. et al. (2008). Design and Analysis of Simulation Experiments, volume 20. Springer.
Klein, A., Falkner, S., Bartels, S., Hennig, P., and Hutter, F. (2016). Fast Bayesian optimization ofmachine learning hyperparameters on large datasets. arXiv preprint arXiv:1605.07079.
Knowles, J. (2006). ParEGO: A hybrid algorithm with on-line landscape approximation for expensivemultiobjective optimization problems. IEEE Transactions on Evolutionary Computation, 10(1):50–66.
Kushner, H. J. (1964). A new method of locating the maximum point of an arbitrary multipeak curvein the presence of noise. Journal of Basic Engineering, 86(1):97–106.
Lam, R., Allaire, D. L., and Willcox, K. E. (2015). Multifidelity optimization using statistical surro-gate modeling for non-hierarchical information sources. In 56th AIAA/ASCE/AHS/ASC Structures,Structural Dynamics, and Materials Conference, page 0143.
Lam, R., Willcox, K., and Wolpert, D. H. (2016). Bayesian optimization with a finite budget: Anapproximate dynamic programming approach. In Advances in Neural Information Processing Systems,pages 883–891.
Liu, D. C. and Nocedal, J. (1989). On the limited memory BFGS method for large scale optimization.Mathematical Programming, 45(1-3):503–528.
Lizotte, D. (2008). Practical Bayesian Optimization. PhD thesis, University of Alberta.
Lizotte, D., Wang, T., Bowling, M., and Schuurmans, D. (2007). Automatic gait optimization withGaussian process regression. In Proceedings of IJCAI, pages 944–949.
Mahajan, A. and Teneketzis, D. (2008). Multi-armed bandit problems. In Hero, A., Castanon, D.,Cochran, D., and Kastella, K., editors, Foundations and Applications of Sensor Management, pages121–151. Springer.
Martı, R., Lozano, J. A., Mendiburu, A., and Hernando, L. (2016). Multi-start methods. Handbook ofHeuristics, pages 1–21.
McLeod, M., Osborne, M. A., and Roberts, S. J. (2017). Practical bayesian optimization for variablecost objectives. arXiv preprint arXiv:1703.04335.
Mehdad, E. and Kleijnen, J. P. (2018). Efficient global optimisation for black-box simulation via sequen-tial intrinsic kriging. Journal of the Operational Research Society, 69:1–13.
Milgrom, P. and Segal, I. (2002). Envelope theorems for arbitrary choice sets. Econometrica, 70(2):583–601.
19
![Page 20: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/20.jpg)
Minka, T. P. (2001). A family of algorithms for approximate Bayesian inference. PhD thesis, Mas-sachusetts Institute of Technology.
Mockus, J. (1975). On Bayesian methods for seeking the extremum. In Optimization Techniques IFIPTechnical Conference, pages 400–404. Springer.
Mockus, J. (1989). Bayesian Approach to Global Optimization: Theory and Applications. Kluwer Aca-demic Publishers.
Mockus, J. and Mockus, L. (1991). Bayesian approach to global optimization and application to multi-objective and constrained problems. Journal of Optimization Theory and Applications, 70(1):157–172.
Mockus, J., Tiesis, V., and Zilinskas, A. (1978). The application of Bayesian methods for seeking theextremum. In Dixon, L. and Szego, G., editors, Towards Global Optimisation, volume 2, pages 117–129.Elsevier Science Ltd., North Holland, Amsterdam.
Neal, R. M. (2003). Slice sampling. Annals of Statistics, 31(3):705–741.
Negoescu, D. M., Frazier, P. I., and Powell, W. B. (2011). The knowledge gradient algorithm forsequencing experiments in drug discovery. INFORMS Journal on Computing, 23(1):46–363.
Osborne, M. A., Garnett, R., and Roberts, S. J. (2009). Gaussian processes for global optimization. In3rd International Conference on Learning and Intelligent Optimization (LION3), pages 1–15. Citeseer.
Packwood, D. (2017). Bayesian Optimization for Materials Science, volume 3. Springer.
Perez, S. (2015). Twitter acquires machine learning startup whetlab. TechCrunch. Accessed July 3,2018.
Poloczek, M., Wang, J., and Frazier, P. (2017). Multi-information source optimization. In Advances inNeural Information Processing Systems, pages 4291–4301.
Powell, W. B. (2007). Approximate Dynamic Programming: Solving the Curses of Dimensionality. JohnWiley & Sons, New York.
Rasmussen, C. and Williams, C. (2006). Gaussian Processes for Machine Learning. MIT Press, Cam-bridge, MA.
Regis, R. and Shoemaker, C. (2005). Constrained global optimization of expensive black box functionsusing radial basis functions. Journal of Global Optimization, 31(1):153–171.
Regis, R. and Shoemaker, C. (2007a). Improved strategies for radial basis function methods for globaloptimization. Journal of Global Optimization, 37(1):113–135.
Regis, R. and Shoemaker, C. (2007b). Parallel radial basis function methods for the global optimizationof expensive functions. European Journal of Operational Research, 182(2):514–535.
Robbins, H. and Monro, S. (1951). A stochastic approximation method. The Annals of MathematicalStatistics, 22(3):400–407.
Roustant, O., Ginsbourger, D., and Deville, Y. (2012). Dicekriging, diceoptim: Two r packages forthe analysis of computer experiments by kriging-based metamodeling and optimization. Journal ofStatistical Software, Articles, 51(1):1–55.
Salemi, P., Nelson, B. L., and Staum, J. (2014). Discrete optimization via simulation using GaussianMarkov random fields. In Proceedings of the 2014 Winter Simulation Conference, pages 3809–3820.IEEE Press.
Sasena, M. (2002). Flexibility and Efficiency Enhancements for Constrained Global Design Optimizationwith Kriging Approximations. PhD thesis, University of Michigan.
Schonlau, M., Welch, W. J., and Jones, D. R. (1998). Global versus local search in constrained optimiza-tion of computer models. Lecture Notes — Monograph Series, 34:11–25.
20
![Page 21: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/21.jpg)
Scott, W., Frazier, P. I., and Powell, W. B. (2011). The correlated knowledge gradient for simulation opti-mization of continuous parameters using Gaussian process regression. SIAM Journal on Optimization,21(3):996–1026.
Seko, A., Togo, A., Hayashi, H., Tsuda, K., Chaput, L., and Tanaka, I. (2015). Prediction of low-thermal-conductivity compounds with first-principles anharmonic lattice-dynamics calculations and Bayesianoptimization. Physical Review Letters, 115.
Shahriari, B., Swersky, K., Wang, Z., Adams, R. P., and de Freitas, N. (2016). Taking the human out ofthe loop: A review of Bayesian optimization. Proceedings of the IEEE, 104(1):148–175.
Shan, S. and Wang, G. G. (2010). Survey of modeling and optimization strategies to solve high-dimensional design problems with computationally-expensive black-box functions. Structural andMultidisciplinary Optimization, 41(2):219–241.
Shoemaker, C., Regis, R., and Fleming, R. (2007). Watershed calibration using multistart local opti-mization and evolutionary optimization with radial basis function approximation/calage au niveau dubassin versant a l’aide d’une optimisation locale a demarrage multiple et d’une optimisation evolutiveavec approximation a fonctions de base radiale. Hydrological Sciences Journal/Journal des SciencesHydrologiques, 52(3):450–465.
Snoek, J., Larochelle, H., and Adams, R. P. (2012). Practical Bayesian optimization of machine learningalgorithms. In Advances in Neural Information Processing Systems, pages 2951–2959.
Snoek, J., Swersky, K., Zemel, R., and Adams, R. (2014). Input warping for Bayesian optimization ofnon-stationary functions. In International Conference on Machine Learning, pages 1674–1682.
Sobester, A., Leary, S., and Keane, A. (2004). A parallel updating scheme for approximating and optimiz-ing high fidelity computer simulations. Structural and Multidisciplinary Optimization, 27(5):371–383.
Sutton, R. S. and Barto, A. G. (1998). Reinforcement Learning: An Introduction. MIT press Cambridge.
Swersky, K., Snoek, J., and Adams, R. P. (2013). Multi-task Bayesian optimization. In Advances inNeural Information Processing Systems, pages 2004–2012.
Swersky, K., Snoek, J., and Adams, R. P. (2014). Freeze-thaw bayesian optimization. arXiv preprintarXiv:1406.3896.
Toscano-Palmerin, S. and Frazier, P. I. (2018). Bayesian optimization with expensive integrands. arXivpreprint arXiv:1803.08661.
Ueno, T., Rhone, T. D., Hou, Z., Mizoguchi, T., and Tsuda, K. (2016). COMBO: An efficient Bayesianoptimization library for materials science. Materials Discovery, 4:18–21.
Zilinskas, A. (1975). Single-step Bayesian search method for an extremum of functions of a single variable.Cybernetics and Systems Analysis, 11(1):160–166.
Waeber, R., Frazier, P. I., and Henderson, S. G. (2013). Bisection search with noisy responses. SIAMJournal on Control and Optimization, 51(3):2261–2279.
Wang, J., Clark, S. C., Liu, E., and Frazier, P. I. (2016a). Parallel Bayesian global optimization ofexpensive functions. arXiv preprint arXiv:1602.05149.
Wang, Z., Hutter, F., Zoghi, M., Matheson, D., and de Feitas, N. (2016b). Bayesian optimization in abillion dimensions via random embeddings. Journal of Artificial Intelligence Research, 55:361–387.
Wang, Z., Zoghi, M., Hutter, F., Matheson, D., De Freitas, N., et al. (2013). Bayesian optimization inhigh dimensions via random embeddings. In IJCAI, pages 1778–1784.
Williams, B. J., Santner, T. J., and Notz, W. I. (2000). Sequential design of computer experiments tominimize integrated response functions. Statistica Sinica, 10(4):1133–1152.
Wu, J. and Frazier, P. (2016). The parallel knowledge gradient method for batch Bayesian optimization.In Advances in Neural Information Processing Systems, pages 3126–3134.
21
![Page 22: A Tutorial on Bayesian Optimization - arxiv.org · A Tutorial on Bayesian Optimization Peter I. Frazier ... Bayesian optimization (BayesOpt) is a class of machine-learning-based optimization](https://reader031.vdocuments.net/reader031/viewer/2022020109/5c9866d209d3f2f43c8ba462/html5/thumbnails/22.jpg)
Wu, J., Poloczek, M., Wilson, A. G., and Frazier, P. (2017). Bayesian optimization with gradients. InAdvances in Neural Information Processing Systems, pages 5273–5284.
Xie, J. and Frazier, P. I. (2013). Sequential Bayes-optimal policies for multiple comparisons with a knownstandard. Operations Research, 61(5):1174–1189.
Xie, J., Frazier, P. I., Sankaran, S., Marsden, A., and Elmohamed, S. (2012). Optimization of compu-tationally expensive simulations with Gaussian processes and parameter uncertainty: Application tocardiovascular surgery. In 50th Annual Allerton Conference on Communication, Control, and Com-puting, pages 406–413. IEEE.
22