| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Abaqus For Offshore Analysis
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Abaqus For Offshore Analysis
Course Contents
• Day 1
• Session 1
• Lecture 1: Overview of SIMILIA and Products
• SIMILIA Brand
• Abaqus FEA Suite
• Lecture 2: Introduction to Offshore Applications with Abaqus
• Demonstration 1: A First Look at Abaqus/CAE
• Session 2
• Workshop 1: Intersecting shell-pipe modeling with Abaqus/CAE
• Lecture 3: What Makes a Problem Nonlinear
• Materials, Boundary Conditions, and Large Deformations
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Abaqus For Offshore Analysis
Course Contents
• Day 1
• Session 3
• Lecture 4: Materials
• Metal and Rubber Behavior and Modeling
• Overview of Geotechnic Materials
• Demonstration 2: Rubber Material Evaluation
• Lecture 5: Structural and Solid Elements in Abaqus
• Beams, Shells, and Solid elements
• Session 4
• Workshop 2: Axisymmetric Pipe Expander Example
• Lecture 6: Special Purpose Elements (Part 1)
• ITT, PSI, Drag Chain, and Spud Can elements
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Abaqus For Offshore Analysis
Course Contents
• Day 2
• Session 1
• Workshop 3: Pipeline Pull-in Analysis
• Workshop 4: Buried Pipeline Analysis
• Lecture 7: Special Purpose Elements (Part 2)
• Pipe, Elbow, CAXA, and Cylindrical Elements
• Session 2
• Lecture 8: Seabed Pipe Interaction
• FRIC Subroutine
• Workshop 5: Lateral Buckling of a Sub-Sea Pipeline
• Workshop 6: Threaded Connector Analysis
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Abaqus For Offshore Analysis
Course Contents
• Day 2
• Session 3
• Lecture 9: Abaqus/Aqua Capabilities
• Wave, buoyancy, current & wind loading
• Workshop 7: Abaqus/Aqua Example
• Session 4
• Lecture 10: Coupled Eulerian-Lagrangian (CEL) Approach
• Demonstration 3: CEL interface in Abaqus/CAE
• Workshop 8: Deformation of an Elastic Dam under Time-dependent
Water Pressure
• Lecture 11: Common Applications: Modeling Tips and Special
Analysis Techniques
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Abaqus For Offshore Analysis
Legal Notices
The Abaqus Software described in this documentation is available only under license from
Dassault Systèmes and its subsidiary and may be used or reproduced only in accordance with the
terms of such license.
This documentation and the software described in this documentation are subject to change
without prior notice.
Dassault Systèmes and its subsidiaries shall not be responsible for the consequences of any
errors or omissions that may appear in this documentation.
No part of this documentation may be reproduced or distributed in any form without prior written
permission of Dassault Systèmes or its subsidiary.
© Dassault Systèmes, 2011.
Printed in the United States of America
Abaqus, the 3DS logo, SIMULIA and CATIA are trademarks or registered trademarks of Dassault
Systèmes or its subsidiaries in the US and/or other countries.
Other company, product, and service names may be trademarks or service marks of their
respective owners. For additional information concerning trademarks, copyrights, and licenses,
see the Legal Notices in the Abaqus 6.11 Release Notes and the notices at:
http://www.simulia.com/products/products_legal.html.
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Abaqus For Offshore Analysis
Revision Status
Lecture 1 5/11 Updated for 6.11
Lecture 2 5/11 Updated for 6.11
Lecture 3 5/11 Updated for 6.11
Lecture 4 5/11 Updated for 6.11
Lecture 5 5/11 Updated for 6.11
Lecture 6 5/11 Updated for 6.11
Lecture 7 5/11 Updated for 6.11
Lecture 8 5/11 Updated for 6.11
Lecture 9 5/11 Updated for 6.11
Lecture 10 5/11 Updated for 6.11
Workshop 1 5/11 Updated for 6.11
Workshop 2 5/11 Updated for 6.11
Workshop 3 5/11 Updated for 6.11
Workshop 4 5/11 Updated for 6.11
Workshop 5 5/11 Updated for 6.11
Workshop 6 5/11 Updated for 6.11
Workshop 7 5/11 Updated for 6.11
Workshop 8 5/11 Updated for 6.11
Demo 1 5/11 Updated for 6.11
Demo 2 5/11 Updated for 6.11
Demo 3 5/11 Updated for 6.11
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 1
Overview of SIMULIA and Products
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L1.2
Abaqus for Offshore Analysis
Overview
• SIMULIA
• What is Abaqus?
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 2
Introduction
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L2.2
Abaqus for Offshore Analysis
Overview
• Application Areas
• Demonstration 1
• Workshop 1 – Intersecting shell-pipe modeling with Abaqus/CAE
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 3
Nonlinear FEA for Offshore Applications
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L3.2
Abaqus for Offshore Analysis
Overview
• Nonlinearity in Structural Mechanics
• Including Nonlinear Effects in an Abaqus Simulation
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 4
Material Modeling in Abaqus
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L4.2
Abaqus for Offshore Analysis
Overview
• Introduction
• Metal Behavior
• Elasticity
• Plasticity
• Isotropic Hardening
• Kinematic Hardening
• Rubber Behavior
• Assumptions
• Hyperelastic Material Models
• Usage Tips
• Overview of Geotechnical Materials
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 5
Structural and Solid Elements in Abaqus
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L5.2
Abaqus for Offshore Analysis
Overview
• Introduction
• Structural Elements in Abaqus
• Solid Elements in Abaqus
• Workshop 2 – Axisymmetric Pipe Expander
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 6
Special Purpose Elements (Part 1)
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L6.2
Abaqus for Offshore Analysis
Overview
• Contact Elements
• Pipe-Soil Interaction Elements
• Drag Chain Elements
• Spud Can Elements
• Workshop 3 – Pipeline Pull-in Analysis
• Workshop 4 – Buried Pipeline Analysis
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 7
Special Purpose Elements (Part 2)
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L7.2
Abaqus for Offshore Analysis
Overview
• Pipe Elements
• Elbow Elements
• Axisymmetric Elements with Nonaxisymmetric Response
• Cylindrical Elements
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 8
Seabed-Pipe Interaction
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L8.2
Abaqus for Offshore Analysis
Overview
• Subroutine FRIC for Pipe-Soil Interaction
• Workshop 5 – Lateral buckling of a sub-sea pipeline
• Workshop 6 – Threaded connector
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 9
Abaqus/Aqua
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L9.2
Abaqus for Offshore Analysis
Overview
• Introduction
• Defining the Offshore Environment
• Defining Offshore Loads
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 10
Overview of the Coupled
Eulerian-Lagrangian (CEL) Approach
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L10.2
Abaqus for Offshore Analysis
Overview
• SIMULIA Multiphysics
• Introduction to CEL
• Offshore applications of CEL
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
Lecture 11
Common Applications: Modeling Tips and
Special Analysis Techniques
| w
ww
.3ds.c
om
| ©
Dassault S
ystè
mes |
L11.2
Abaqus for Offshore Analysis
Overview
• Random Waves
• Generating Seabed/Pipe-Wall Profiles
• Abaqus/CAE - Lofting
• Scripting
• Modeling Suggestions: Pipe Laying
• Contact modeling tips
• Modeling Suggestions: Surface Elements