![Page 1: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/1.jpg)
ACs processing
TAO-cruise August 2006
![Page 2: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/2.jpg)
1. Total vs 0.2m signal
total signal
0.2 m signal
The 0.2 m signal is removed from the total signal using the 0.2 m interpolated values
0.2 m interpolated values
![Page 3: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/3.jpg)
2. Spectral discontinuity correction
Present also in 0.2 m measurements
![Page 4: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/4.jpg)
2. Spectral discontinuity correction
Longer Portion of the Spectrum
Shorter Portion of
the Spectrum
Q: Which is the correct one, LPS or SPS?
A: For ap we don’t care because we know that ap(NIR)≈0.
![Page 5: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/5.jpg)
2. Spectral discontinuity correction
Correction methoda) assume that the LPS is
the correct one
Longer Portion of the Spectrum
![Page 6: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/6.jpg)
2. Spectral discontinuity correction
Correction methoda) assume that the LPS is
the correct oneb) using the first 2 s of
the LPS, predict the value of ap at the last of the SPS
![Page 7: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/7.jpg)
2. Spectral discontinuity correction
Correction methoda) assume that the LPS is
the correct oneb) using the first 2 s of
the LPS, predict the value of ap at the last of the SPS
c) compute the difference between the predicted and observed values of ap at the last of the SPS
d) subtract such difference from the SPS
![Page 8: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/8.jpg)
2. Spectral discontinuity correction
Case of cp
a) There is no at which we a-priori know the value of cp
b) Arbitrarily assume that LSP is correct
c) Apply correction as for ap
d) Evaluate the bias introduced by such arbitrary assumption
![Page 9: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/9.jpg)
2. Spectral discontinuity correction
Bias evaluation (cp)
a) NOTE: For this data set, cp(750) (minimal values) ranges from 0.02 to 0.08 m-1
b) For most of the cp data the discontinuity is not important
c) When it is important, our arbitrary assumption introduces biases of the order of 0.0007/0.02=4% (conservative estimate)
d) There is no preferential direction for the shift
![Page 10: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/10.jpg)
2. Spectral discontinuity correction
Importance of this correction for ap
a) NOTE: For this data set, ap(676) ranges from 0.001 to 0.005 m-1
b) For most of the ap data the discontinuity is not important
c) When it is important, the discontinuity can be of the order of 0.0003/0.005=6% to 0.0003/0.001=30% of ap(676)
d) There is no preferential direction for the shift
![Page 11: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/11.jpg)
3. Interpolation to common • Because the ACs produces ap and cp
spectra with different wavelength centers, we interpolated each spectrum to have equally spaced values every 2 nm from 400 to 750 nm
![Page 12: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/12.jpg)
4. Correction for residual T-dependence
• In theory by subtracting the 0.2 m interpolated signal from the total signal, we should not need any TS-correction of our ap spectra
• However, because the ap that we are measuring have really low values in the red region (0.001-0.005 m-1), even small Ts between two consecutive 0.2 m filtrations could introduce relatively large biases in ap
![Page 13: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/13.jpg)
• What ranges of T and S are we observing between 1-hr distant data points?
4. Correction for residual T-dependence
from Sullivan et al. 2006
![Page 14: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/14.jpg)
4. Correction for residual T-dependence
• What ranges of T and S are we observing between 1-hr distant data points?
ignore S
![Page 15: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/15.jpg)
4. Correction for residual T-dependence
1. b() is independent of T (and S)
)()(
),()(),()()( b
NIRb
TNIRaNIRaTaaa wp
wpTbp
)(Tpa
scattering correction
note that part of the b-corr depends on T)(NIRaTp
2. look at Zaneveld’s scattering correction #3:
![Page 16: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/16.jpg)
4. Correction for residual T-dependence
ref
)()(
),()(),()( refrefref
bNIRb
TNIRaNIRaTaa wp
wp
How to get T?a) Assume that there exists a spectral region (ref) where:
0)()(
),()(),()( refrefref
b
NIRb
TNIRaNIRaTaa wp
wp
b) Set ref=710:740 nm and NIR=730 nm
c) For each spectrum, find T that minimizes:
TTa Sw )(),( refref where:
d) Apply T-correction to ap using the derived T
![Page 17: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/17.jpg)
)()(
)(b
NIRb
NIRap
)()(
)()( b
NIRb
NIRaa pp
)(Tbpa
)(pa
4. Correction for residual T-dependence
![Page 18: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/18.jpg)
4. Correction for residual T-dependence
no correction
![Page 19: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/19.jpg)
4. Correction for residual T-dependence
b-correction
![Page 20: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/20.jpg)
4. Correction for residual T-dependence
Tb-correction
![Page 21: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/21.jpg)
4. Correction for residual T-dependence
![Page 22: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/22.jpg)
4. Correction for residual T-dependence
![Page 23: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/23.jpg)
5. Compute cpT
• The temperature-corrected cp is finally calculated as:
pTbp
Tp bac
![Page 24: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/24.jpg)
6. Biofouling
![Page 25: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/25.jpg)
6. Biofouling
![Page 26: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/26.jpg)
7. CD content
• processed ACs data merged with PAR, lat, long, SST and salinity data
• Sullivan et al. 2006 table interpolated every 2 nm (instrument specific)
![Page 27: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/27.jpg)
Some highlights
![Page 28: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/28.jpg)
![Page 29: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/29.jpg)
-125ºW -140ºW
![Page 30: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/30.jpg)
125º 140º
![Page 31: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/31.jpg)
![Page 32: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/32.jpg)
![Page 33: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/33.jpg)
biofouling
![Page 34: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/34.jpg)
![Page 35: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/35.jpg)
![Page 36: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/36.jpg)
![Page 37: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/37.jpg)
![Page 38: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/38.jpg)
![Page 39: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/39.jpg)
![Page 40: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/40.jpg)
![Page 41: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/41.jpg)
![Page 42: ACs processing TAO-cruise August 2006. 1. Total vs 0.2 m signal total signal 0.2 m signal The 0.2 m signal is removed from the total signal using](https://reader036.vdocuments.net/reader036/viewer/2022062322/5697bf7b1a28abf838c834bc/html5/thumbnails/42.jpg)