www.alligator-sensit.com | [email protected]
ALLIGATOR Ventilfabrik GmbH Richard-Steiff-Straße 4 | 89537 Giengen/Brenz
Fon: +49 (0) 73 22 · 130 · 1Fax: +49 (0) 73 22 · 130 · 359
since1920
valves
ssssssssinceeeee1920
vav lves
ssiiinnnnccce1920
with reliability
ALLIGATOR sens.it TM
TPMS Tool Kit
The TPMS Tool kit was specially put together to provide all the mechanical tools needed to install tire pressure sensors on valves and rims. The preset torque screwdriver corresponds to the values recommended by ETRTO and ensures that components are tightened to the right torque and that sensors are correctly installed.
What is included in the kit3 1/4“ Adapter
3 Torx bit, size 15
3 Torx bit, size 20
3 11 mm drive socket
3 12 mm drive socket
3 Clamp-in valve tool
3 Calibrated torque screwdriver, preset to 3.3 Nm/29 inch lbs
Your advantages at a glance: 3 Simple and correct mounting of sensor and valve on the rim 3 Prevents loss of air through damaged grommets in the case of clamp-in valves3 One-man operation - optimised installation with no wasted time3 High-quality, calibrated torque screwdriver preset to 3.3 Nm/29 inch lbs (measurement accuracy +/- 6%)3 Rapid bit changing through the use of sophisticated technology
Part number 232425Part number 232425