ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 3www.fryreglet.com
TRIM
S
4” Light Cove
4” Light Base
TRADITIONAL TRIMSCONTEMPORARY POSSIBILITIES.Fry Reglet’s comprehensive line of millwork trim was developed to satisfy the aesthetic needs of the
architectural community while providing the contractor with the ability to deliver a consistently uniform
installation. Whether the project requires a traditional 2’ x 2’ panel layout, or a complex contemporary
design, Fry Reglet’s millwork trims are designed to be easily field modified. Factory fabricated
components and intersections are available to aid installation and assure the Architect of a perfect
aesthetic every time.
Architects have relied on Fry Reglet’s superior products and services for more than 65 years. From
precision engineering, to expert manufacturing, to the best customer service in the industry. Fry Reglet
is proud to be an industry leader in the fabrication of extruded aluminum trims and moldings.
4 | www.fryreglet.com
Pg. 6 Millwork RevealPg. 7 Millwork Channel w/ Return KeysPg. 8 Millwork Reveal FPg. 9 Millwork Channel F w/ Return KeyPg. 10 Millwork RetainerPg. 11 Millwork InsertPg. 12 Millwork Reveal L AnglePg. 13 Millwork Channel L Angle w/ Return KeyPg. 14 Millwork Reveal Inside Corner
Pg. 15 Millwork Channel Inside Corner w/ Return KeysPg. 16 Millwork Reveal Outside CornerPg. 17 Millwork Channel Outside Corner w/ Return KeysPg. 18 4” Millwork Reveal BasePg. 19 4” Millwork Reveal Base w/ Return KeyPg. 20 Millwork PostPg. 21 Millwork Post TerminationPg. 22 Millwork Post Outside CornerPg. 23 Millwork Corner Key
SHAPE FINDER INDEX
Profiles
Pg. 38 Millwork Cleat AccessoriesPg. 40 Millwork FinishesPg. 42 Factory Fabricated IntersectionsPg. 43 Optional AccessoriesPg. 45 Product Details
Pg. 26 Lighted U ChannelPg. 28 Lighted Millwork RevealPg. 30 Lighted Millwork Channel w/ Return Keys
Pg. 32 Lighted Millwork Reveal FPg. 34 Lighted Millwork Channel F w/ Return KeyPg. 36 Lighted Millwork Reveal 135O Outside Corner
MILLWORK
MILLWORK LED
DETAILS
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 5www.fryreglet.com
LIGHTED U CHANNEL
PG. 23
MILLWORK POSTOUTSIDE CORNER
MILLWORK POSTTERMINATION
MILLWORK CORNER KEY
PG. 21 PG. 22
LIGHTED MILLWORKREVEAL
PG. 26 PG. 28
LIGHTED MILLWORKCHANNEL W/ RETURN KEYS
PG. 30
MILLWORK REVEAL MILLWORK RETAINERMILLWORK CHANNELW/ RETURN KEYS
MILLWORK INSERT
MILLWORK REVEAL F
MILLWORK REVEALL ANGLE
MILLWORK CHANNEL FW/ RETURN KEY
MILLWORK CHANNELL ANGLE W/ RETURN KEY
PG. 6 PG. 10PG. 7
PG. 11
PG. 8
PG. 12
PG. 9
PG. 13
MILLWORK REVEALINSIDE CORNER
MILLWORK CHANNELINSIDE CORNER W/RETURN KEYS
PG. 14 PG. 15
SHAPE FINDER INDEX
usage
This chart is designed to help you locate a specific shape in the Fry Reglet Shape Finder. Find the shape you want.
Detailed information can be found on the page number above the shape.
4” MILLWORK REVEAL BASEW/ RETURN KEY
PG. 18
MILLWORK CHANNELOUTSIDE CORNER W/ RETURN KEYS
MILLEWORK REVEAL OUTSIDE CORNER
4” MILLWORK REVEAL BASE
PG. 16 PG. 17
Profiles
MILLWORK POST
PG. 19 PG. 20
PG. 34
LIGHTED MILLWORK REVEAL F
LIGHTED MILLWORKCHANNEL F W/ RETURN KEY
PG. 32
LIGHTED MILLWORKREVEAL 135O
OUTSIDE CORNER
PG. 36
MWCLEAT 25
PG. 38
6 | www.fryreglet.com
MILLWORK REVEAL
usage
Fry Reglet Millwork Reveal installs with
1/2”, 3/4” or 1” millwork panels, and
provides a straight, uniform reveal
horizontally or vertically between panels.
guide specification
Where indicated on drawings, Millwork
Reveal, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork Reveal
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
Millwork Reveal
DIM A
2 3/8”
7/8”
1/2”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWR5050
3/4" MWR7550
1" MWR10050
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 7www.fryreglet.com
MILLWORK CHANNEL W/ RETURN KEYS
usage
Fry Reglet Millwork Channel with return
keys installs with 1/2”, 3/4” or 1” millwork
panels, features return keys to cover cut
edges of millwork panels, and provides
a straight, uniform reveal horizontally or
vertically between panels.
guide specification
Where indicated on drawings, Millwork
Channel with return keys, as manufactured
by Fry Reglet Corporation, shall be
installed. Aluminum shall be extruded
alloy 6063 T5, with clear anodized, colored
anodized or powder coat finish
INSTALLATION DETAIL / ISO View
Millwork Channelw/ Return Keys
Millwork Channelw/ Return Keys
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
2 3/8”
3/16”
7/8”
1/2”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWC5050
3/4" MWC7550
1" MWC10050
DIM A
8 | www.fryreglet.com
MILLWORK REVEAL F
usage
Fry Reglet Millwork Reveal F installs
with 1/2”, 3/4” or 1” millwork panels
and provides a straight, uniform reveal
horizontally or vertically between panels.
guide specification
Where indicated on drawings, Millwork
Reveal F, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork Reveal F
Millwork Reveal F
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
1 1/2”
7/8”
1/2”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWRF5050
3/4" MWRF7550
1" MWRF10050
DIM A
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 9www.fryreglet.com
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
MILLWORK CHANNEL FW/ RETURN KEY
usage
Fry Reglet Millwork Channel F with return
key installs with 1/2”, 3/4” or 1” millwork
panels, features an return key to cover cut
edges of millwork panels, and provides
a straight, uniform reveal horizontally or
vertically at ends of millwork.
guide specification
Where indicated on drawings,
Millwork Channel F with return key, as
manufactured by Fry Reglet Corporation,
shall be installed. Aluminum shall be
extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork Channel Fw/ Return Key
Millwork Channel Fw/ Return Key
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
1 1/2”
7/8”
1/2”
3/16”
SIZES
DIM A NUMBER
1/2" MWCF5050
3/4" MWCF7550
1" MWCF10050
DIM A
10 | www.fryreglet.com
MILLWORK RETAINER
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Millwork Retainer installed
in conjunction with Millwork Insert and
installs with 1/2”, 3/4” or 1” millwork
panels return keys, and provides a straight
uniform reveal horizontally or vertically at
ends of millwork.
guide specification
Where indicated on drawings, Millwork
Retainer as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
MillworkRetainer
Millwork Retainer
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
5/16”
2 3/4”
1”
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 11www.fryreglet.com
MILLWORK INSERT
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Millwork Insert with return keys
installs with 1/2”, 3/4” or 1” millwork
panels and features return keys to cover
cut edges of millwork panels and provides
a straight, uniform reveal horizontally or
vertically at ends of millwork. Installs with
millwork insert retainer.
guide specification
Where indicated on drawings, Millwork
Retainer with return keys, as manufactured
by Fry Reglet Corporation, shall be
installed. Aluminum shall be extruded
alloy 6063 T5, with clear anodized, colored
anodized or powder coat finish.
INSTALLATION DETAIL / ISO View
Millwork Insert
Millwork Insert
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
1/2”
3/16”
SIZES
DIM A NUMBER
1/2" MWINS5050
3/4" MWINS7550
1" MWINS10050
DIM A
12 | www.fryreglet.com
MILLWORK REVEALL ANGLE
usage
Fry Reglet Millwork Reveal L Angle
installs with 1/2”, 3/4” or 1” millwork
panels, and provides a straight, uniform
edge horizontally or vertically at ends of
millwork panels.
guide specification
Where indicated on drawings, Millwork
Reveal L Angle, as manufactured by Fry
Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with clear anodized, colored anodized or
powder coat finish.
INSTALLATION DETAIL / ISO View
Millwork RevealL Angle
Millwork RevealL Angle
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
1”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWRL50
3/4" MWRL75
1" MWRL100
DIM A
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 13www.fryreglet.com
1/4” Cleat
MILLWORK CHANNELL ANGLEW/ RETURN KEY
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Millwork Channel L Angle with
3/16” return key installs with 1/2”, 3/4”
or 1” millwork panels, and provides a
3/16” thick, straight and uniform edge
horizontally or vertically at ends of
millwork panels.
guide specification
Where indicated on drawings, Millwork
Channel L Angle with 3/16” return key, as
manufactured by Fry Reglet Corporation,
shall be installed. Aluminum shall be
extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork Channel L Angle w/ Return Key
Millwork Channel L Angle w/ Return Key
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
1 1/8”
3/16”
SIZES
DIM A NUMBER
1/2" MWCL50
3/4" MWCL75
1" MWCL100
DIM A
14 | www.fryreglet.com
MILLWORK REVEAL INSIDE CORNER
usage
Fry Reglet Millwork Reveal Inside Corner
installs with 1/2”, 3/4” or 1” millwork
panels at 90 degree inside corners and
provides straight and uniform edge at end
of millwork panels.
guide specification
Where indicated on drawings, Millwork
Reveal Inside Corner, as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with clear anodized, colored anodized or
powder coat finish.
INSTALLATION DETAIL / ISO View
Millwork Reveal Inside Corner
Millwork Reveal Inside Corner
Millwork Panel
Millwork Panel
Substrate
Substrate
1 1/16”
1 1/16”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWRISC50
3/4" MWRISC75
1" MWRISC100
DIM A
1/4” Cleat
1/4” Cleat
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 15www.fryreglet.com
MILLWORK CHANNEL INSIDE CORNERW/ RETURN KEYS
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Millwork Channel Inside Corner
with return keys installs with 1/2”, 3/4”
or 1” millwork panels at 90 degree inside
corners and provides straight and uniform
return keys to cover cut edges of millwork
panels.
guide specification
Where indicated on drawings, Millwork
Channel Inside Corner with return keys, as
manufactured by Fry Reglet Corporation,
shall be installed. Aluminum shall be
extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork Channel Inside Corner w/ Return Keys
Millwork Channel Inside Corner w/ Return Keys
Millwork Panel
Millwork Panel
Substrate
Substrate
1 1/16”
1 1/16”
3/8”
SIZES
DIM A NUMBER
1/2" MWCISC50
3/4" MWCISC75
1" MWCISC100
DIM A
1/4” Cleat
1/4” Cleat
16 | www.fryreglet.com
MILLWORK REVEALOUTSIDE CORNER
usage
Fry Reglet Millwork Reveal Outside Corner
installs with 1/2”, 3/4” or 1” millwork
panels at 90 degree outside corners, is
abuse resistant, and provides straight and
uniform edge at end of millwork panels.
guide specification
Where indicated on drawings, Millwork
Reveal Outside Corner, as manufactured
by Fry Reglet Corporation, shall be
installed. Aluminum shall be extruded
alloy 6063 T5, with clear anodized, colored
anodized or powder coat finish.
INSTALLATION DETAIL / ISO View
Millwork RevealOutside Corner
Millwork RevealOutside Corner
Millwork Panel
Millwork Panel
Substrate
Substrate
1 1/2”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWROSC50
3/4" MWROSC75
1" MWROSC100
DIM A
1/4” Cleat
1/4” Cleat
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 17www.fryreglet.com
MILLWORK CHANNEL OUTSIDE CORNERW/ RETURN KEYS
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Millwork Channel Outside
Corner with return keys installs with 1/2”,
3/4” or 1” millwork panels at 90 degree
outside corners, is abuse resistant, and
provides straight and uniform exposed
return keys to cover cut edges of millwork
panels.
guide specification
Where indicated on drawings, Millwork
Channel Outside Corner with return
keys, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork Channel OutsideCorner w/ Return Keys
Millwork Channel OutsideCorner w/ Return Keys
Millwork Panel
Millwork Panel
Substrate
Substrate1 1/2”3/16”
SIZES
DIM A NUMBER
1/2" MWCOSC50
3/4" MWCOSC75
1" MWCOSC100
DIM A
1/4” Cleat
1/4” Cleat
18 | www.fryreglet.com
4” MILLWORKREVEAL BASE
usage
Fry Reglet 4” Millwork Reveal Base installs
with 1/2”, 3/4” or 1” millwork panels
and features an exposed 4” base flange
that provides a straight, uniform base
horizontally at the bottom of millwork
panels.
guide specification
Where indicated on drawings, 4” Millwork
Reveal Base, as manufactured by Fry
Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with clear anodized, colored anodized or
powder coat finish.
INSTALLATION DETAIL / ISO View
4” MillworkReveal Base
4” MillworkReveal Base
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
4 15/16”
4”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWRB50400
3/4" MWRB75400
1" MWRB100400
DIM A
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 19www.fryreglet.com
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
4” MILLWORK CHANNEL BASE W/ RETURN KEY
usage
Fry Reglet 4” Millwork Channel Base with
return key installs with 1/2”, 3/4” or 1”
millwork panels and features an exposed
3/16” return key to cover cut edges of
millwork panels, and a 4” base flange
that provides a straight, uniform base
horizontally at the bottom of millwork
panels.
guide specification
Where indicated on drawings,
4” Millwork Channel Base with return
key, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
4” Millwork ChannelBase w/ Return Key
4” Millwork ChannelBase w/ Return Key
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat3/16”
4 15/16”
4”
SIZES
DIM A NUMBER
1/2" MWCB50400
3/4" MWCB75400
1" MWCB100400
DIM A
20 | www.fryreglet.com
usage
Fry Reglet Millwork Channel Post with
1/4” post installs with 1/2”, 3/4” or 1”
millwork panels and provides a 1/4” thick,
straight and uniform post horizontally or
vertically between panels.
guide specification
Where indicated on drawings, Millwork
Post with 1/4” post, as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with clear anodized, colored anodized or
powder coat finish.
INSTALLATION DETAIL / ISO View
Millwork Post
Millwork Post
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
3”1/4”
1 3/8”
MILLWORK POST
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWP50
3/4" MWP75
1" MWP100
DIM A
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 21www.fryreglet.com
MILLWORK POSTTERMINATION
usage
Fry Reglet Millwork Post Termination with
1/4” post installs with 1/2”, 3/4” or 1”
millwork panels and provides a 1/4” thick,
straight and uniform post horizontally or
vertically between panels.
guide specification
Where indicated on drawings, Millwork
Post Termination with 1/4” post, as
manufactured by Fry Reglet Corporation,
shall be installed. Aluminum shall be
extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork PostTermination
Millwork PostTermination
Millwork Panel
Millwork Panel
Substrate
Substrate
1/4” Cleat
1/4” Cleat
1/4”
1 5/16”1 9/16”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWPT50
3/4" MWPT75
1" MWPT100
DIM A
22 | www.fryreglet.com
MILLWORK POSTOUTSIDE CORNER
usage
Fry Reglet Millwork Post Outside Corner
installs with 1/2”, 3/4” or 1” millwork
panels at 90 degree outside corners, is
abuse resistant, and provides a straight
and uniform 1/4” exposed post at edges
of millwork panels.
guide specification
Where indicated on drawings, Millwork
Post Outside Corner, as manufactured by
Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with clear anodized, colored anodized or
powder coat finish.
INSTALLATION DETAIL / ISO View
Millwork PostOutside Corner
Millwork Panel
Millwork Panel
Substrate
Millwork PostOutside Corner
Substrate
1 3/8”1 7/16
”
1/4”
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWPOSC50
3/4" MWPOSC75
1" MWPOSC100
DIM A
1/4” Cleat
1/4” Cleat
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 23www.fryreglet.com
Millwork Panel
Substrate
Millwork Corner Key
Millwork Corner Key
Substrate
7/8”2 1/4”
3/16”
DIM A
MILLWORK CORNER KEY
usage
Fry Reglet Millwork Corner Key installs
with 1/2”, 3/4” or 1” kerfed millwork
panels and provides a straight and uniform
edge horizontally or vertically at outside
corners.
guide specification
Where indicated on drawings, Millwork
Corner Key, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized, colored anodized or powder
coat finish.
INSTALLATION DETAIL / ISO View
Millwork Panel
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
SIZES
DIM A NUMBER
1/2" MWCK50
3/4" MWCK75
1" MWCK100
1/4” Cleat
1/4” Cleat
24 | www.fryreglet.com
LOUISVILLE HIGH SCHOOL (MILLWORK CHANNEL W/RETURN KEYS)
LOUISVILLE HIGH SCHOOL (MILLWORK CHANNEL W/RETURN KEYS)
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 25www.fryreglet.com
LEVIS STORE - ATLANTA, GA (LIGHTED MILLWORK REVEAL)
26 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED U CHANNEL
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
DIM A
1/2” 5/8”
Substrate
Millwork Panel
SIZES
DIM A NUMBER
1/2" LED-MWU5050
3/4" LED-MWU7550
1" LED-MWU10050
usage
Fry Reglet Lighted U Channel installs in 1/2”,
3/4” or 1” Millwork and provides a continuous
band of light horizontally or vertically. Frosted
lens included.
guide specification
Where indicated on drawings, Fry Reglet Lighted
U Channel, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized,
colored anodized or powder coat finish. Specify
length and Kelvin temperature.
SubstrateMillwork Panel
LED Lens Integral LEDLight Strip
Integral LEDLight Strip
LED Lens
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 27www.fryreglet.com
LIGHTING OPTIONS
LIGHTED U CHANNELLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWU_A2C
4’ LED-MWU_A4C
6’ LED-MWU_A6C
8’ LED-MWU_A8C
10’ LED-MWU_A10C
3000
2’ LED-MWU_B2C
4’ LED-MWU_B4C
6’ LED-MWU_B6C
8’ LED-MWU_B8C
10’ LED-MWU_B10C
3500
2’ LED-MWU_C2C
4’ LED-MWU_C4C
6’ LED-MWU_C6C
8’ LED-MWU_C8C
10’ LED-MWU_C10C
4000
2’ LED-MWU_D2C
4’ LED-MWU_D4C
6’ LED-MWU_D6C
8’ LED-MWU_D8C
10’ LED-MWU_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWU10050A2C/P
Depth of profile
28 | www.fryreglet.com
DIM A NUMBER
1/2" LED-MWR5050
3/4" LED-MWR7550
1" LED-MWR10050
LIGHTED MILLWORKREVEAL
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Substrate
Millwork Panel
1/4” Cleat
1/4” Cleat
LED Lens
DIM A
2 3/8”1/2”
7/8”
Integral LEDLight Strip
Substrate
Millwork Panel
1/4” Cleat
Integral LEDLight Strip
LED Lens
1/4” Cleat
SIZES
INSTALLATION DETAIL / ISO Viewusage
Fry Reglet Lighted Millwork Reveal installs with
1/2”, 3/4” or 1” millwork panels and provides a
continuous band of light horizontally or vertically.
Frosted lens included.
guide specification
Where indicated on drawings, Fry Reglet
Lighted Millwork Reveal, as manufactured by Fry
Reglet Corporation, shall be installed. Aluminum
shall be extruded alloy 6063 T5, with clear
anodized, colored anodized or powder coat
finish. Specify length and Kelvin temperature.
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 29www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORKREVEALLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWR_A2C
4’ LED-MWR_A4C
6’ LED-MWR_A6C
8’ LED-MWR_A8C
10’ LED-MWR_A10C
3000
2’ LED-MWR_B2C
4’ LED-MWR_B4C
6’ LED-MWR_B6C
8’ LED-MWR_B8C
10’ LED-MWR_B10C
3500
2’ LED-MWR_C2C
4’ LED-MWR_C4C
6’ LED-MWR_C6C
8’ LED-MWR_C8C
10’ LED-MWR_C10C
4000
2’ LED-MWR_D2C
4’ LED-MWR_D4C
6’ LED-MWR_D6C
8’ LED-MWR_D8C
10’ LED-MWR_D10C
C = CLEAR ANODIZED
P = PAINTED
1/4” Cleat
Example: LED-MWR10050A2C/P
Depth of profile
30 | www.fryreglet.com
LIGHTED MILLWORK CHANNEL
W/ RETURN KEYS
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Millwork Panel
LED Lens
DIM A
1/2”
3/16”
7/8”
2 3/8”
Substrate
1/4” Cleat
LED Lens
Millwork Panel
Integral LEDLight Strip
1/4” Cleat
SIZES
INSTALLATION DETAIL / ISO Viewusage
Fry Reglet Lighted Millwork Channel with
exposed return keys installs with 1/2”, 3/4” or
1” millwork panels, features exposed return
keys to cover cut edges of millwork panels, and
provides a continuous band of light horizontally
or vertically. Frosted lens included.
guide specification
Where indicated on drawings, Lighted
Millwork Channel with exposed return keys, as
manufactured by Fry Reglet Corporation, shall
be installed. Aluminum shall be extruded alloy
6063 T5, with clear anodized, colored anodized
or powder coat finish. Specify length and Kelvin
temperature.
DIM A NUMBER
1/2" LED-MWC5050
3/4" LED-MWC7550
1" LED-MWC10050
Integral LEDLight Strip
Substrate
1/4” Cleat
1/4” Cleat
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 31www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK CHANNELW/ RETURN KEYSLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWC_A2C
4’ LED-MWC_A4C
6’ LED-MWC_A6C
8’ LED-MWC_A8C
10’ LED-MWC_A10C
3000
2’ LED-MWC_B2C
4’ LED-MWC_B4C
6’ LED-MWC_B6C
8’ LED-MWC_B8C
10’ LED-MWC_B10C
3500
2’ LED-MWC_C2C
4’ LED-MWC_C4C
6’ LED-MWC_C6C
8’ LED-MWC_C8C
10’ LED-MWC_C10C
4000
2’ LED-MWC_D2C
4’ LED-MWC_D4C
6’ LED-MWC_D6C
8’ LED-MWC_D8C
10’ LED-MWC_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWC10050A2C/P
Depth of profile
32 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED MILLWORK REVEAL F
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Substrate
Substrate
Millwork Panel
1/4” Cleat
1/4” Cleat
DIM A 1 1/2”
1/2”
7/8”
Integral LEDLight Strip
Integral LEDLight Strip
LED Lens
SIZES
usage
Fry Reglet Lighted Millwork Reveal F installs with
1/2”, 3/4” or 1” millwork panels and provides a
continuous band of light horizontally or vertically
at ends of millwork. Frosted lens included.
guide specification
Where indicated on drawings, Lighted Millwork
Reveal F, as manufactured by Fry Reglet
Corporation, shall be installed. Aluminum shall
be extruded alloy 6063 T5, with clear anodized,
colored anodized or powder coat finish. Specify
length and Kelvin temperature.
DIM A NUMBER
1/2" LED-MWRF5050
3/4" LED-MWRF7550
1" LED-MWRF10050
Millwork Panel
LED Lens
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 33www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK REVEAL FLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWRF_A2C
4’ LED-MWRF_A4C
6’ LED-MWRF_A6C
8’ LED-MWRF_A8C
10’ LED-MWRF_A10C
3000
2’ LED-MWRF_B2C
4’ LED-MWRF_B4C
6’ LED-MWRF_B6C
8’ LED-MWRF_B8C
10’ LED-MWRF_B10C
3500
2’ LED-MWRF_C2C
4’ LED-MWRF_C4C
6’ LED-MWRF_C6C
8’ LED-MWRF_C8C
10’ LED-MWRF_C10C
4000
2’ LED-MWRF_D2C
4’ LED-MWRF_D4C
6’ LED-MWRF_D6C
8’ LED-MWRF_D8C
10’ LED-MWRF_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWRF10050A2C/P
Depth of profile
34 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED MILLWORK CHANNEL F
W/ RETURN KEY
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Substrate
Substrate
Millwork Panel
Millwork Panel
1/4” Cleat
LED Lens
LED Lens
DIM A1 1/2”
1/2”
7/8”
Integral LEDLight Strip
Integral LEDLight Strip
SIZES
1/4” Cleat
DIM A NUMBER
1/2" LED-MWCF5050
3/4" LED-MWCF7550
1" LED-MWCF10050
usage
Fry Reglet Lighted Millwork Channel F with
exposed return key installs with 1/2”, 3/4” or
1” millwork panels, features an exposed return
key to cover cut edges of millwork panels, and
provides a continuous band of light horizontally
or vertically. Frosted lens included.
guide specification
Where indicated on drawings, Lighted
Millwork Channel F with exposed return key, as
manufactured by Fry Reglet Corporation, shall
be installed. Aluminum shall be extruded alloy
6063 T5, with clear anodized, colored anodized
or powder coat finish. Specify length and Kelvin
temperature.
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 35www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK CHANNEL FW/ RETURN KEYLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWCF_A2C
4’ LED-MWCF_A4C
6’ LED-MWCF_A6C
8’ LED-MWCF_A8C
10’ LED-MWCF_A10C
3000
2’ LED-MWCF_B2C
4’ LED-MWCF_B4C
6’ LED-MWCF_B6C
8’ LED-MWCF_B8C
10’ LED-MWCF_B10C
3500
2’ LED-MWCF_C2C
4’ LED-MWCF_C4C
6’ LED-MWCF_C6C
8’ LED-MWCF_C8C
10’ LED-MWCF_C10C
4000
2’ LED-MWCF_D2C
4’ LED-MWCF_D4C
6’ LED-MWCF_D6C
8’ LED-MWCF_D8C
10’ LED-MWCF_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWCF10050A2C/P
Depth of profile
36 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
LIGHTED MILLWORK REVEAL 135O
OUTSIDE CORNER
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
Substrate
Substrate
Integral LEDLight Strip
Integral LEDLight Strip
Millwork Panel
135O
1 3/16”
1/2”
DIM A
LED Lens
LED Lens
Millwork PanelSIZES
1/4” Cleat
1/4” Cleat
usage
Fry Reglet Lighted Millwork Reveal 135O Outside
Corner installs with 1/2”, 3/4” or 1” millwork
panels, ensures a straight and true outside
corner, and provides a continuous band of light
vertically at corners of millwork. Frosted lens
included.
guide specification
Where indicated on drawings, Lighted Millwork
Reveal 135O Outside Corner, as manufactured
by Fry Reglet Corporation, shall be installed.
Aluminum shall be extruded alloy 6063 T5,
with clear anodized, colored anodized or
powder coat finish. Specify length and Kelvin
temperature.
DIM A NUMBER
1/2" LED-MWROSC5050
3/4" LED-MWROSC7550
1" LED-MWROSC10050
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 37www.fryreglet.com
LIGHTING OPTIONS
LIGHTED MILLWORK REVEAL 135O
OUTSIDE CORNERLED’S / FT KELVIN LENGTH PART #
32
2700
2’ LED-MWROSC_A2C
4’ LED-MWROSC_A4C
6’ LED-MWROSC_A6C
8’ LED-MWROSC_A8C
10’ LED-MWROSC_A10C
3000
2’ LED-MWROSC_B2C
4’ LED-MWROSC_B4C
6’ LED-MWROSC_B6C
8’ LED-MWROSC_B8C
10’ LED-MWROSC_B10C
3500
2’ LED-MWROSC_C2C
4’ LED-MWROSC_C4C
6’ LED-MWROSC_C6C
8’ LED-MWROSC_C8C
10’ LED-MWROSC_C10C
4000
2’ LED-MWROSC_D2C
4’ LED-MWROSC_D4C
6’ LED-MWROSC_D6C
8’ LED-MWROSC_D8C
10’ LED-MWROSC_D10C
C = CLEAR ANODIZED
P = PAINTED
Example: LED-MWROSC10050A2C/P
Depth of profile
38 | www.fryreglet.com
INSTALLATION DETAIL / ISO View
MWCLEAT 25
INSTALLATION DETAIL / Cross Section PRODUCT DETAIL
usage
Fry Reglet Millwork Cleat is used to install 1/2”,
3/4” or 1” millwork panels by providing straight,
secure, horizontal attachments at the substrate.
Cleat provides 3/8” lift off.
guide specification
Where indicated on drawings, Millwork Cleat, as
manufactured by Fry Reglet Corporation, shall be
installed. Aluminum shall be extruded alloy 6063
T5, with clear anodized, colored anodized or
powder coat finish.
Substrate
1/4” Cleat
1/4”
Substrate
1/4” Cleat
1 3/8”
5/8”
3/4”
3/8”
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 39www.fryreglet.com
MILLWORK FINISHES
STANDARD FINISHES
specification
Kynar® Finish Shall Be As Follows:Finish shall meet or exceed AAMA 2605
Specification “Voluntary Specification for High
Performance Organic Coatings on Architectural
Extrusion Panels.” (Nominal dry film thickness shall
be .30 mil for primer and 1.0 mil for finish coats).
Finish shall be 70% min. resin content full strength
polyvinylidene fluoride coating, applied over
chemical conversion coating and primer. Coatings
shall receive a bake cycle of 17 minutes at 450°F.
Kynar® is available by special order only. Contact
Fry Reglet for color information.
chemical conversion coat finishes
Chemical conversion coating is a multi-step
cleaning and metal preparation process. It cleans
the aluminum, and acts as a protective coating
until primer and paint can be applied. When field
painting is planned, chemical conversion coating
should be specified.
specification
Chemical Conversion Coat Finish Shall Be As Follows: Treatment of aluminum moldings to
conform with ASTM D 1730 Type B and MIL-C-
5541A.
prime painting
Fry Reglet Prime Paint is spray applied in the
factory and baked-on so that it serves as an ideal
base for finish painting in the field.
specification
Prime Paint Shall Be As Follows:Factory sprayed and baked-on to serve as a base
for field painting.
powder paint
Fry Reglet Powder paint, applied over chemical
conversion coating and primer, provides durability
and beauty for most interior and exterior
applications. This finish is provided as the standard
Fry Reglet paint finish.
This factory applied, baked-on finish is available
at standard lead times in the colors shown and in
custom colors to match swatches provided.
specification
Powder Paint Shall Be As Follows:All surfaces to receive a polyester powder coat will
be pretreated in strict accordance with the powder
coating manufacturer's specification.
Finish total dry film thickness should meet or exceed
the dry film thickness of 30 microns/ 1.2 mils as
specified in AAMA 2605 SEC 4.3. Color uniformity
will meet or exceed the requirements of AAMA 2605
SEC 7.1
kynar® premium finish
The industry standard for over 25 years, Fry Reglet
Kynar® coatings provide superior resistance to
chalking and ultraviolet deterioration. Kynar®
finishes are highly resistant to chemicals, salt spray
and industrial pollutants. This premium finish is
recommended for moldings to be used on exteriors
in harsh environments or in coastal areas where salt
air is common. Available in all standard Kynar colors
and custom colors to match swatches provided.
Kynar® is a registered trademark of ALTOFINA.
40 | www.fryreglet.com
STANDARD FINISHES
MILLWORK FINISHES
standard finishes
Gun Metal Gray
Tan Medium Bronze Dark Bronze Cream
Black Oyster HazeWhite
PlatinumAdobe Silver Satin Silver Gray
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 43www.fryreglet.com
Fry Reglet’s expertise with factory fabrication of intersections, at virtually any angle, permits the complete
assembly of decorative elements ready for installation. Designers may let their imaginations soar. All that is
required is a sketch with the parts to be used. Fry Reglet will design the decorative element, quote a complete
price and furnish a complete assembly, ready to install. Factory fabricated intersections and corner pieces of
the same or different moldings are used to connect horizontal and vertical joints, or transitioning from plane to
plane. The intersections are welded and standard leg lengths are 6” from the center point of the reveal. Custom
leg lengths are available. Intersections are available in the configurations shown below as well as custom
configurations and may be made up of the same or different shapes.
"L" INTERSECTION "T" INTERSECTION "+" INTERSECTION
FACTORY FABRICATED INTERSECTIONS
FACTORYFABRICATEDINTERSECTIONS
INSIDE CORNER OUTSIDE CORNER
44 | www.fryreglet.com
OPTIONAL ACCESSORIES
Single Rocker Pad - Self Powered Wireless Control
LED-DIMMER SWITCH
Power Supply Electrodynamic harvesting
Inputs / Outputs 1 Button Rocker SwitchRadio Frenquency (RF) Transmitter
Transmission Range 80ft. (25m)
RF Transmission On Press and Release of Rocker Button
Dimensions 3.8”H x 3.4”W x .85”D
Weight 3.5oz.
Mounting Surface mounted on wall (using included mounting screws) Can also be flush mounted by optional use of electrical wall box or low-voltage.
Invironment Indoor use only
32° to 131° F (0° to 55°C)5% to 95% relative humidity (non-condensing)
Agency Listing FCC, I.C.
Single Channel Lighting Control Module
LED-RELAY
Range 150 feet (50-150 typical)
Profile A5-38-08 Type 0x02 Dimming
Input Voltage 120/277 VAC
Max Switch Power 3300W @ 277VAC
Max Switch Current 20A
Relay Output 1 N.O. and 1 Common ontact
Dimmer Output 0-10V 30mA (sinking drivers)
Ambient Operating Temperature 37°C for 3300 W load @ 277 VAC
Certifications ETL/Intertek - UL 244A(FCC United States) SZV-TCM3XXX(IC Canada) 5713A-TCMXXX
Dimensions 2.939” x 2.319” x 1.25”
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 45www.fryreglet.com
PRODUCT DETAIL
Fry Reglet 1.5 inch Cuttable LED Strip
ETL Listed to 2108 Low Voltage Lighting Products
LEDs/ft 32
Luminous Flux 2700K, 3000K, 3500K, 4000k 550lm
Power Consumption 3.84W/ft
Segment Length 1.5”
Segment Width .39”
Maximum Run Length 20’
Input Voltage 24V
Input Current 0.02Amps / Segment
LED’s per Segment 4
Flux 550lm/ft
LED Samsung2835 / SPMWH1221FD5GBUMSB
Binning Center Quarter Bin Mix (3 step) MacAdam Ellipse
Beam Angle 120°
CRI 80
CCT 2700K, 3000K, 3500K, 4000k
UL ETL Listed to UL 2108
Substrate Polyimide
IP Rating IP20
46 | www.fryreglet.com
PRODUCT DETAIL
POWER SUPPLY
MODEL LED-PWM-90-24 (6.75” x 2 1/2” x 1 1/2”)
OUTPUT DC VOLTAGE 24V
RATED CURRENT 3.7A
RATED POWER 90W
DIMMING RANGE 0~100%
PWM FREQUENCY (Typ.) 300Hz
VOLTAGE TOLERANCE ±3.0%
SETUP, RISE TIME (Note 2) 500ms, 80ms 115VAC / 230VAC at full load
HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load
INPUT VOLTAGE RANGE 90 ~ 305VAC 127 ~ 431VDC
FREQUENCY RANGE 47 ~ 63HZ
POWER FACTOR PF>0.98/115VAC, PF>0.96/230VAC, PF>0.94/277VAC at full load
TOTAL HARMONIC DISTOR-TION
THD<20% when output loading≥60% at 115VAC/230VAC input and output loading≥75% at 277VAC input
EFFICIENCY (Typ.) 90.5%
AC CURRENT 0.95A / 115AC 0.5A / 230VAC 0.4A / 277VAC
INRUSH Current (Typ.) COLD START 60A(twidth=520µs measured at 50% ipeak) at 230VAC
MAX> NO. of PSU’s on 16A CIRCUIT BREAKER
3 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT <0.25mA / 277VAC
PROTECTION OVERLOAD 108 ~120% RATED OUTPUT POWER
Protection type: Hiccup mode, recovers automatically after fault condition is removed
SHORT CIRCUIT Hiccup mode, recovers automatically after fault condition is removed
OVER VOLTAGE 28 ~34V
Protection type: Shut down o/p voltage, re-power on to recovery
OVER TEMPERATURE Shut down o/p voltage, re-power on to recover
ENVIRON-MENT
WORKING TEMPERATURE -40 ~ +70°C
WORKING HUMIDITY 20 ~ 95% RH non condensing
STORAGE TEMP. HUMIDITY -40 ~ +80°C, 10 ~ 95% RH
TEMP. COEFFICIENT ±0.03%/°C (0 ~50°)
VIBRATION 10 ~500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
SAFETY & EMC
SAFETY STANDARDS UL8750, CSA C22.2 No. 250.13-12, ENEC EN61374-1; EN61347-2-13, EN62384 indepen-dent, IP67 approved; Design refer to EN60335-1
WITHSTAND VOLTAGE I/P-O/P:3.75KVAC
ISOLATION RESISTANCE I/P-O/P:100M Ohms / 500VDC/ 25°C / 70% RH
EMC EMISSIONS Compliance to EN55015, EM61000-3-2 Class C (≥60% load) ; EN61000-3-3
EMC IMMUNITY Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11; EN61547, light industry level(surge L-N : 2KV) criteria A
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.2. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase set up time.
ENGINEERED PRODUCT SYSTEMS / MILLWORK
| 47www.fryreglet.com
PRODUCT DETAIL
ACCESSORIESFIELD-CUT CONNECTORS
A - FLEXIBLE Each extruded profile is shipped with
integral LED light strips factory installed,
and a 3” long flexible connector for
attachment to abutting profile.
B - RIDGED CONNECTOR
C - FLEXIBLE POWER FEEDPower feed connector is required for
each continuous run of 90 Watts, for
connection to the power supply. Power
feed connectors are sold separately.
D - “L” CONNECTOR
A
C
B
D