Basic Compressor Safety and Operation

Air and Gas Mixtures

Air+Gas+Pressure+Heat=Explosion

Relief Valves

These valves are to relieve pressure should the system exceed the rated

maximum working pressure.

The Unit’s Safety “Kill” System

Safety “Kill” Systems are put in place to prevent the unit from operating outside the safe operating parameters. They are set to protect you and the equipment.

Safety Tips While Working On Compressors

Working on the Unit

Working on the Unit (cont)

Working on the Unit (cont)

Starting the Unit

Running the Unit (cont)

Always Ask Yourself

Summary

Summary (cont.)

Protection from these and other hazards are achieved by following proper procedures and eliminating risk-taking. Write and use JSA’s. Follow LOTO procedures. Follow good housekeeping practices. Follow start up, purging, loading, and shut down

procedures Be familiar with the location, valves, and job task.

If you are unsure about anything!!!

You have the authority and

obligation to “Stop the Job”.

Until you are completely sure it is safe to proceed.