Transcript
Page 1: Broadband Phone Adapter - CenturyLink | Local Provider of High

Broadband Phone AdapterQUICK INSTALLATION GUIDE

11 Computer* Your Telephone*

WHAT YOU NEED:

SET UP:

Phone Ports1 and 2

Connect to yourtelephones

BroadbandPhone Adapter

SPA-2102

Ethernet PortConnect to Your PCs

Internet PortConnect to the Internet (WAN)

Power JackConnect to

Power Adapter

Phone Cord* Ethernet Cable 2* Power Adapter

22

Make sure you have all of the following items:

Follow these instructions if you have Qwest® Broadband Service or cable broadband service. If you have a DSLservice from another provider that requires you to enter User Name and Password (PPPoE), or need instructions foran alternative setup, use the User Manual located on line at www.qwest.com/mybroadbandphone.

Shut downyour computer.

Disconnect thepower to yourDSL or cablemodem.

Plug in the Power Adapter to thePower Jack on your BroadbandPhone Adapter. Plug the PowerAdapter into an electrical outlet.

Wait for approximately threeminutes.

Turn on your computer.

Pick up your telephone handset.

If you hear a dial tone, your setup iscomplete. You can now place calls.

If you do not hear a dial tone, go towww.qwest.com/mybroadbandphonefor additional troubleshooting steps.

If your modem isconnected to thecomputer through a USBport, remove the USBcable from the modemand computer. You willnot need the USB cable.

Connect one end of the Blue Cable to theEthernet port on your DSL or cable modem.

Connect the other end of the Blue Cableto the Blue port (labeled Internet) onyour Broadband Phone Adapter.

Note: Ethernet port looks similar to aregular phone jack but is slightly wider.

If your DSL or cable modem does nothave an available Ethernet port, Connectyour computer with another Ethernetcable (not included) to the Yellow port(labeled “Ethernet”) on your BroadbandPhone Adapter.

If your DSL or cable modem has an availableEthernet port, connect your computer directlyto your DSL or cable modem.

Connect a telephone to the Greenport labeled “Phone 1” on yourBroadband Phone Adapter using aphone cord (not included).

If you subscribed to twoBroadband Phone lines, connect asecond telephone to the Greenport labeled “Phone 2” withanother phone cord (not included).

Reconnect the power toyour DSL or cablemodem following theinstructions providedwith your modem.

Wait approximately twominutes.

a b

e fd

hg

c

Copyright © 2007 Qwest. All rights reserved. All trademarks owned by Qwest Communications International Inc.

Broadband Modem*

Copyright © 2008 Qwest. All rights reserved. All brand names and product names are trademarks or registeredtrademarks of their respective holders. All trademarks owned by Qwest Communications International Inc.

You have finished installing your Broadband Phone Adapter! To learn

more about an exciting range ofamazing features available with your

Broadband Phone Service,go online to:

www.qwest.com/mybroadbandphone

Congratulations!

For additional information and help on how to get the most out of your Qwest® Broadband Phone Service

please visit www.qwest.com/mybroadbandphoneor call 1 877-878-7543.

Blue Cable

If any of the items above are missing or are damaged,please contact customer service immediately for replacement.

*Computer, telephone, broadband modem, phone cord and blue cables are not included.

Top Related