Description and Use
TM
PS-100 High Performance Sealant:StructureSeal PS-100 is a highly elastic super adhesion polyether moisture cure sealant that cures quickly to form a soft rubber seal. Struc-tureSeal is designed to be a weatherproofing sealant for use on roofs, walls, flashings, expan-sion joints, windows, and doors. StructureSeal is compatible for use with many building materi-als including: coated metals, glass, EIFS, galva-nized steel, masonry, and many other common building materials.
Advantages
Features:• Strong adhesion to Kynar coated metals• Excellent adhesion flexibility• 100% VOC compliant• Solvent free - 100% solids will not shrink• Non-slump, applies vertically and over-
head• 30 minute skin over• +/- 50% joint movement• Unaffected by UV light• Can be applied at temperatures as low as
30 degrees• Paintable within 24 hours
Regulatory Compliance:• Conforms to OTC Rule for Sealants• Conforms to USDA Requirements for Non-
food Contact• Meets requirements of California Regs:
CARB, BAAQMD and SCAQMD• Conforms to California Proposition 65
Build
ing
Prod
ucts
Gro
upTM /
Pro
duct
Gui
de
Building Products GroupTM
A A Group Subsidiary
Green Standards:• LEED 2.2 for New Construction and
Major Renovations: Low Emitting Ma-terials (Section 4.1) 1 Point
• NAHB Model Green Home Building Guidelines: 5 Global Impact Points
• VOC Content: less than 19 grahms/li-ter ASTM D2369 EPA Method 24
Product Details:• 10.1 oz (300 ml) cartridges - 24 car-
tridges/carton, 45 cartons/pallet• Color - Neutral gray• Quantity discounts available• Made in Michigan
Refer to the Material Safety Data Sheet and product label prior to using this product.
TM
StructureSeal PS-100 high performance sealant.
DNA Matters...Designed for Performancewww.structuretecbpg.com • (855) 2USE BPG • (855) 287-3274
Group - Solutions for the Built Environment
