EXTERNAL DIMENSIONS
Length (mm) 10225
Width (mm) 2496
Height (mm) (empty) 3560
Wheel base (mm) 5850
Track (mm)Front 2041
Rear 1870
Min. ground clearance (mm)
257
Approach angle (o) 15
Departure angle (o) 20
Front overhang (mm) 1540
Rear overhang (mm) 2200
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
C7H 8X4 CURTAINSIDER
FEATURES
The new Sinotruk C7H off ers you fl exibility with a high torque 540HP engine, drivelines and wheelbases in chassis confi gurations to meet your transportation requirements.
Leading safety features include a built in crumple zone, ABS and EBS
H Permit Glidemaster trailer and body built by Roadmaster paired with a Sinotruk C7H 8X4 with AMT transmission
A cost eff ective, reliable road freight solution
Mezzanine fl oor capable
Front Body Length= 7400mm, Trailer Length= 11500mm, Pallet capacity= 36
C7H 8X4 CURTAINSIDER
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
WEIGHTS
Cross weight of chassis (kg) 9800
Weight allocation of chassis (kg)
Front axle 2790/2890
Rear axle 2060/2060
GVM (kg) 31000
Max load of two axles (kg) Front 6500/6500
Rear 18000
GCM (kg) 55000
CAPABILITY
Max speed(km/h) 110
Min turning diameter (m) 22.4
Max climb gradient (%) 35
Fuel tank (L) 400
CABIN
Model U
Sits 2
Turing radius (mm) 2800
CLUTCH
Model CH430-25 diaphragm
Operation Mode Hydraulic with air
ENGINE
Model MC13.54-50
Displacement (L) 12.419
Power rating kW/(r/min) 397/1900
Max torque Nm/(r/min) 2500/1050-1350
TRANSMISSION
Model HW25712XA
Forward gear ratio 15.012, 11.667, 9.03, 7.146, 5.568, 4.375, 3.431, 2.667, 2.064, 1.633, 1.273, 1
Reverse gear ratio 13.811, 3.157
FRAME
Model Trapezium frame
Main beam cross-section (mm) 270×85×8
Width of frame Assembly (mm)
Front 940
Rear 762
STEERING GEAR
Model Ball circul
Ratio 22.2-26.2
Max pressure of pump (kPa) 18300
Steering way Recirculating ball power Steering
BRAKING SYSTEM
Working pressure (kPa) 1000
Drive braking type Dual circuitcompressed air brake
Brake power adjust type ABS/EBL/ASR
Parking brake type Spring stored energy air cut brake
Assistant brake type EVB
ELECTRICS
Circuit type double, controlpositive pole
Voltage (V) 24
Generator power (kW) 2.0
Accumulator voltage / capacity(V/Ah) 2x12/165
EXTRAS
Trailer brakes ABS to rear Included
Sunvisor, side skirts Included
Retarder VR115CT
SUSPENSION
Front Model Spring
Number 3 leaf parabolic
Rear Model Air
Number 8 air bags
DRIVING AXLE
Model MCY13 disc
Redactor ratio Ratio 3.08
Optional 3.36, 4.11, 2.85
Differential lock Diff lock + Cross lock
FRONT AXLE
Model HF7 (disc) 22’’
C7H 8X4 CURTAINSIDER
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
GLIDEMASTER TRUCK BODY
Body Length Overall 7400mm
Body Length Internal 7150mm
Width Overall 2490mm
Height Overall 4240mm
Decking 3mm C/10 steel decking. Pressed steel coaming rails, rope rails both sides with chain hooks
Roof One piece aluminium roof skins attached to aluminium Top-hats, steel RHS side rails with aluminium curtain tracks.
Front Bulkhead Pressed steel uprights, 7mm GRP outer front panels with plywood inner panels. Structurflex type 3 curtain tensioners with luff groove curtain poles.
Rear Bulkhead Pressed steel uprights and top header panel with 21mm Duopan rear wall. Structurflex type 3 curtain tensioners with luff groove curtain poles.
Roof Supports Two sliding roof support poles per side.
Curtains Single skin dry freight curtains with low stretch bottom straps attached to stainless steel buckles.
Mudguards Alloy pressed half guards complete with MTE mudflaps.
Drawbeam Certified drawbeam with mounts for duomatic and trailer sockets.
Ringfeder 50mm Ringfeder coupling fitted
Signage DG combination sign. (One on rear wall only)
Steps Tread plate step at the bottom of each rear pillar.
Outriggers Roof prop outriggers (Two pair)
Lighting LED lighting system
Lighting Front One front clearance lamp per side.
Lighting Rear Painted finish light bars, One Hella stop/tail and one indicator at bottom per side, Two reversing lights.
Lighting Sides Five lower and upper side marker lights, One lower side indicator.
5 AXLE GLIDEMASTER TRAILER
Body Length Overall 11500mm
Body Length Internal 11250mm
Width Overall 2490mm
Height Overall 4290mm
Axles 19.5 Disc braked axles, 8 stud, grease filled hubs. Mechanical hubometer fitted.
Suspension Airlight II air suspension
Brakes Wabco EBS braking system, coded to LTSA NZHVBC brake regulations.
Wheels 20 x 19.5” 8 stud, Weigh-cheetah alloy wheels.
Tyres 20 x Bridgestone 265/70R, 19.5 G540 tyres.
Dolly Fabricated G350 tandem axle dolly assembly fitted with a DK90/20 ballrace turntable. A certified “A” frame drawbar with a 50mm tow eye complete with a pig tail spring assembly.
Chassis Fabricated G350 I beam steel chassis rails, webs profile cut to accept pressed steel G350 cross members. Fabricated light weight I beam suspension cross members with integrated gusseting.
Decking 3mm C/10 steel decking fixed and sealed to crossmembers these are spaced at approximately 400mm centres. Pressed steel coaming rails, certified rope rails with chain hooks on every 2nd crossmember, this designed complies with NZS5444.
Roof One piece aluminium roof skins attached to aluminiumt op-hats, steel RHS side rails with alu-minium curtain tracks.
Front Bulkhead Pressed steel uprights, 7mm GRP outer front panels with plywood inner panels. Structurflex type 3 curtain tensioners and luff groove poles.
Rear Bulkhead Pressed steel uprights and top header panel with 21mm Duopan rear panel. Structurflex type 3 curtain tensioners with luff groove curtain poles.
C7H 8X4 CURTAINSIDER
0800 SINO NZ | www.sinotruknz.com | 92 The Blvd, Te Rapa Park, Hamilton
5 AXLE GLIDEMASTER TRAILER
Roof Supports Three sliding roof support poles per side.
Curtains Single skin dry freight curtains with low stretch bottom straps attached to stainless steel buckles.
Equipment Alloy pressed half guards complete with Roadmaster mudflaps.
Rear Bumper Alloy infill panel with the BULL stamp in rear dock bumper.
Storage 2400x450x250mm alloy bearer carrier box with 2 x stainless steel lids.
Tie Downs Ferry tie downs.
Signage 1 x D/G Sign on rear of trailer only.
Steps Tread plate step at the bottom of each rear pillar.
Light Panels Stainless steel light panels at top and bottom of rear.
Scales Weight scales Knorr Timms module.
Electronics LED lighting system featuring, 7-core main wiring harness with a 7-pin coupling wired to the standard code.
Lights One front clearance lamp per side.
Lights Two Hella stop/tail and one indicator per side. (Bottom), One Hella stop/tail and one indicator per side. (Hi-level), Two reversing lights.
Lights Six lower and upper side marker lights. Per side, One lower side indicator.