Download - Catálogo M-DA Inglês
-
8/12/2019 Catlogo M-DA Ingls
1/20
Rotary JointsSeries M + DA
-
8/12/2019 Catlogo M-DA Ingls
2/20
2
M Rotary Joints
are suitable for water steam
Advantages are:
The extremely robust seal gives satisfactoryresults with heavily contaminated water.Example: Hot furnaces and stone-washingmachines.
Housing made of cast iron with spheroidalgraphite, bearing housing made of cast iron.
Rotor made of steel with polished abraison andcorrosion-protective coating of metal-ceramicsin the sealing surface area.
Packing with teflon impregnation, very rugged,may also be used with high-solids media.
Compression spring made of chrome steel.
High-quality ball bearing. Easy access tolubrication nipple.
Corrosion-resistant support bearing in pres-sure chamber.
Connection to rotating pressure system bymeans of:
Standard connection piece with right-handor left-hand male thread BSP (ISO 228).
Sealing and centering cone at end ofthread. Adapter pieces for NPT and otherthreads are available.
K-flange with conical inner ring.
Radial and axial housing connections withright-hand thread BSP (ISO 228). Adapter pie-ces for NPT and other threads are available.Thread for fixed inner pipe always right-handeven with left-hand thread at rotor (design 2).
Combined slide bearing and gland seal forrotating inner pipe as diaphragm gland.
Prevention of housing rotation by means offork at bearing housing which accommoda-tes the locking pin.
Operating manuals are available atwww.maier-heidenheim.de or directly fromour works. Our sales staff will be happy toprovide you with user ID and password.When placing an order you will find thisinformation on the delivery note.
Rotary Joints Series M
-
8/12/2019 Catlogo M-DA Ingls
3/20
3
Application data
Ordering instructions
Series
DesignNominal diameter DN mm
Medium
Temperature min. ..maxCPressure PN min. ..max bar
Speed max...min 1
M
1, 2, R2, 315...100
Cooling waterHot water
-15...1600,2...20
16 000DN
M
1, 2, R2, 315...100
Steam
-15...1600,2...20
8000DN
MExample: R 3 40 K 001
Series M
R Design for rotating inner pipewith slide bearing and gland seal
Nominal diameter in mm (= ^ dimension A)15, 20, 25, 32, 40, 50, 65, 80, 100
Rotor connectionR for right-hand threadL for left-hand threadK for K flange
Adapters for other threads are available, upon request.
Consecutive numbers for special designs; numbering by factory.
Number of housing connections1 for one way flow design2 for two way flow design3 for two way flow design with vacuum breaker
Designs for other values and media upon request.The combination of maximum values should be avoided.
-
8/12/2019 Catlogo M-DA Ingls
4/20
4
M1 DN 15-100
15
M 115 R1101030M 115 L1101031M 115 K1101032
20
M 120 R1101080M 120 L1101081M 120 K1101082
25
M 125 R1101150M 125 L1101151M 125 K1101152
32
M 132 R1101250M 132 L1101251M 132 K1101252
40
M 140 R1101350M 140 L1101351M 140 K1101352
50
M 150 R1101450M 150 L1101451M 150 K1101452
65
M 165 R1101550M 165 L1101551M 165 K1101552
80
M 180 R1101650M 180 L1101651M 180 K1101652
100
M 1100 R1101756M 1100 L1101757M 1100 K1101758
13G 1/2
G 1/2 A176150
7625243556646122322942,2
20G 3/4
G 3/4 A185156
7630304056846122327942,4
25G 1
G 1 A207173
88353545658521228301063,6
32G 1 1/4
G 1 1/4 A241200
130484555768751633411557,7
38G 1 1/2
G 1 1/2 A255209
1305250627810751636461558,7
50G 2
G 2 A297244
145686582103108216436017512,9
66G 2 1/2
G 2 1/2 A339278
1858585901061010216487521018,9
81G 3
G 3 1/2 A400331
2251081051051321212520549525535
98G 4
G 4 A475384
24011911412015912140266611030044,8
for one way flow of a medium
DN
TypeOrder-No.TypeOrder-No.TypeOrder-No.
ABDEF
J K K G7/h8MNORSUSWTAWeight (kg)
Flanges see page 16
-
8/12/2019 Catlogo M-DA Ingls
5/20
5
M2 DN 15-100
15
M 215 R1101034M 215 L1101033M 215 K1101035
20
M 220 R1101083M 220 L1101084M 220 K1101085
25
M 225 R1101153M 225 L1101154M 225 K1101155
32
M 232 R1101253M 232 L1101254M 232 K1101255
40
M 240 R1101353M 240 L1101354M 240 K1101355
50
M 250 R1101453M 250 L1101454M 250 K1101455
65
M 265 R1101553M 265 L1101554M 265 K1101555
80
M 280 R1101653M 280 L1101654M 280 K1101655
100
M 2100 R1101750M 2100 L1101751M 2100 K1101752
13G 3/8G 1/8
G 1/2 A174
150762524355664612232822942,1
20G 1/2G 1/4
G 3/4 A183
156763030405684612233227942,3
25G 3/4G 3/8G 1 A205
17388353545658
52122835301063,5
32G 1G 1/2
G 1 1/4 A238
20013048455576875163345411557,6
38G 1 1/4G 3/4
G 1 1/2 A252
209130525062781075163650461558,5
50G 1 1/2
G 1G 2 A294
24414568658210310821643606017512,7
66G 2
G 1 1/2G 2 1/2 A
336
278185858590106101021648707521018,6
81G 2 1/2G 1 1/2
G 3 1/2 A398
331225108105105132121252054809525534,5
98G 3G 2
G 4 A470
3842401191141201591214026669011030044,3
for two way flow of a mediumdesigned for non-rotating inner pipe
DN
TypeOrder-No.TypeOrder-No.TypeOrder-No.
ABCDE
F J K K G7/h8MNORSUVSWTAWeight (kg)
Flanges see page 16
-
8/12/2019 Catlogo M-DA Ingls
6/20
6
MR2 DN 15-100
15
MR 215 R1101036MR 215 L1101037MR 215 K1101038
20
MR 220 R1101086MR 220 L1101087MR 220 K1101088
25
MR 225 R1101156MR 225 L1101157MR 225 K1101158
32
MR 232 R1101256MR 232 L1101257MR 232 K1101258
40
MR 240 R1101356MR 240 L1101357MR 240 K1101358
50
MR 250 R1101456MR 250 L1101457MR 250 K1101478
65
MR 265 R1101556MR 265 L1101557MR 265 K1101558
80
MR 280 R1101656MR 280 L1101657MR 280 K1101658
100
MR 2100 R1101753
MR 2100 L1101754
MR 2100 K1101755
13G 3/8G 1/8
G 1/2 A174
15076252435566461223101516022942,1
20G 1/2G 1/4
G 3/4 A183
15676303040568461223121516627942,3
25G 3/4G 3/8G 1 A205
173883535456585212281615185301063,5
32G 1G 1/2
G 1 1/4 A238
2001304845557687516332015208411557,6
38G 1 1/4G 3/4
G 1 1/2 A252
20913052506278107516362525227461558,5
50G 1 1/2
G 1G 2 A294
24414568658210310821643
31,8252596017512,7
66G 2
G 1 1/2G 2 1/2 A
336
27818585859010610102164845302967521018,6
81G 2 1/2G 1 1/2
G 3 1/2 A398
33122510810510513212125205445303489525534,5
98G 3G 2
G 4 A470
384240119114120159121402666604042011030044,3
for two flow of a mediumdesigned for rotating inner pipe
DN
TypeOrder-No.TypeOrder-No.TypeOrder-No.
ABCDE
F J K K G7/h8MNORSU W G7/e8XZSWTAWeight (kg)
Flanges see page 16
-
8/12/2019 Catlogo M-DA Ingls
7/20
7
M3 DN 20-40
20
M 320 R1101103M 320 L1101104M 320 K1101105
25
M 325 R1101173M 325 L1101174M 325 K1101175
32
M 332 R1101259M 332 L1101260M 332 K1101261
40
M 340 R1101359M 340 L1101360M 340 K1101361
20G 1/2G 1/4
G 3/4 A183
15676303040568604612233227943,8
25G 3/4G 3/8G 1 A205
173883535456587352122835301064,6
32G 1G 1/2
G 1 1/4 A238
200130484555768
8175163345411558,3
38G 1 1/4G 3/4
G 1 1/2 A252
20913052506278108675163650461558,7
for two way flow of a mediumdesigned for non-rotating inner pipe, with vacuum breaker
DN
TypeOrder-No.TypeOrder-No.TypeOrder-No.
ABCDE
F J K K G7/h8MNOQRSUVSWTAWeight (kg)
Flanges see page 16
-
8/12/2019 Catlogo M-DA Ingls
8/20
8
15
11010401101041
110104211010391101044110104511010463510502
35000803511501350904035100013501001350071335009183511002350120111010511101050
20
1101090110109111010931101092110108911010941101095110109635105041190010351195435000803511502350904735100023501002350071335009183511003350120211011011101100
25
1101160110116111011631101162110115911011641101165110116635105061190020351196235000803511503350905235100033501003350071335009183511004350120311011711101170
32
1101263110126411012651101266110126211012671101268110126935105011190020351196235001203511504350904535100053501004350071435009183511005350120411012741101273
40
1101362110136311013641101365110126211013661101367110136835105091190020351196235001203511505350904535100053501004350071435009183511006350122611013731101372
50
11014601101461
110146211014581101463110146411014653510512
35001603511506350905735100143501024350071535009183511007350120511014701101469
65
11015591101560
110156111014591101562110156311015643510514
35001603511507350905335100073501005350071535009183511008350120611015691101568
80
11016601101661
110166211016591101663110166411016653510514
35001903511508350905435100083501006350071635009183511009350120711016701101669
100
11017601101761
110176211017591101763110176411017653510523
35001943511509350903535100093501007350071635009183511010350120811017701101769
M 3... R/L/K
M 1... R/L/K
M 2... R/L/K
MR 2... R/L/K
Spare parts for series M
DN
1 Housing 12 Housing 23 Housing 34 Housing R25 Bear. housing6 Rotor R7 Rotor L8 Rotor K
13 Slide bearing14 Vacuum valve15 CU seal16 Hex screw17 Compress. spring18 NILOS ring19 Ball bearing20 Locking ring21 Spring washer22 Lubric. nipple23 Packing26 Circlip27 Supp. bearing28 Thrust collar
Please specify type designation when inquiring or ordering!
-
8/12/2019 Catlogo M-DA Ingls
9/20
9
Series H + DC:Especially suited forlarge steam capacities; available diameters up to DN 350.
-
8/12/2019 Catlogo M-DA Ingls
10/20
10
DA Rotary Joints
are suitable for thermal oil steam water at low RPM
Adavantages are:
Inexpensive design, since there are notbearings.
Available in large sizes, up to DN 300 mmnominal bore.
Seal rings are resistant to fraction, even athigh pressures.
The design A2 for rotating inner pipe has aseal between inlet and outlet.
Maintenance free no lubrication necessary.
Housing made of cast iron with spheroidalgraphite, diameters DN 80 and above madeof steel.
Rotor made of chrome steel, rotor pipe for
diameters DN 65 and above made of steel;sealing surface made of chrome steel.
Cover, flange cover, butting ring, adjustmentring and compression springs made ofchrome steel.
Sealing elements made of highly wear-resi-stant, metal-impregnated graphite carbon.Sealing rings are pressure-loaded.
The seal requires little maintenance. Wearindicator for sealing ring on rotor. Wear ofscond ring is determined by means of measu-rement gauge.
Connection to rotating pressure system bymeans of:
K flange with conical inner ring.
Radial and axial housing connections withflanges PN 16 or PN 40.
Thread for fixed inner pipe always right-hand
(design 2).Static bearing for rotating inner pipe (notsupplied with rotary joint) in the rotor; addi-tional seal for complete isolation of flow andreturn.
Prevention of housing rotation and radial sup-port of housing by means of lugs at housingdesigned to accommodate the fastening boltsof a bracket (not supplied with rotary joint).Thermal expansion of the roller and wear ofthe seal cause an axial displacement of thehousing (away from the roller).
Devices for prevention of housing rotation aswell as hose and compensator connectionsand inner pipe must not interfere with thisaxial displacement since the rotary joint willotherwise not operate properly. Please readoperating manual!
Operating manuals are available at
www.maier-heidenheim.de or directly fromour works. Our sales staff will be happy toprovide you with user ID and password.When placing an order you will find thisinformation on the delivery note.
Rotary Joints Series DA
-
8/12/2019 Catlogo M-DA Ingls
11/20
11
Application data
Ordering instructions
Series
DesignNominal diameter DN mm
Medium
Temperature min.. .max CPressure PN min. ..max bar
Speed max...min 1
DA
1, 2, A250...300
Cooling waterHot water
SteamThermal oil
-30...320*0,8...40
from DN 150...20100 000DN x PN
Designs for other values and media upon request.*500C as special design.The combination of maximum values should be avoided.
DAExample: A 2 300 K 020
Series DA
A Designs for rotating inner pipewith complete sealing between flow and return
Nominal diameter in mm (= ^ dimension A)50, 65, 80, 100, 125, 150, 200, 250, 300
Rotor connectionK for K flange
Consecutive numbers for special designs; numbering by factory.
Number of housing connections1 for one way flow design
2 for two way flow design
-
8/12/2019 Catlogo M-DA Ingls
12/20
12
DA1 DN 50-300
50DN 5029418010514465
1801301026202511528520
66DN 6533720612118085
2301551031223013134035
80DN 80386232153220105
2701751236253510836053
98DN 100
457275179270114
34021012
46,5254514353790
120DN 125
517310203315142
39023020
56,53055158547136
145DN 150
555337208345170
43026025
66,53065198550167
195DN 200
653392235425225
52030530723570244650
240DN 250
749453263510280
61039535774075300750
295DN 300
856515300595340
72049040825080330860
50
DA 150 K-4001109137-400
65
DA 165 K-4001109237-400
80
DA 180 K-4001109337-400
100
DA 1100 K-1601109437-160
DA 1100 K-4001109437-400
125
DA 1125 K-1601109537-160
DA 1125 K-4001109537-400
150
DA 1150 K-1601109637-160
DA 1150 K-4001109637-400
200
DA 1200 K-1601109737-160
DA 1200 K-4001109737-400
250
DA 1250 K-1601109837-160
DA 1250 K-4001109837-400
300
DA 1300 K-1601109937-160
DA 1300 K-4001109937-400
PN 16 DIN 2633PN 40 DIN 2635
for one way flow of a medium
DN
Type PN 16Order-No.Type PN 40Order-No.
ABEFG J K G7/h8
L + 0,3MOST AB -0,2NATAWeight (kg)
Flanges see page 16
-
8/12/2019 Catlogo M-DA Ingls
13/20
13
DA2 DN 50-150
50DN 40DN 4018010514465
18013010163262030
G 1 1/42752511528524
66DN 50DN 5020612118085
23015510208312230
G 1 1/23353013134039
80DN 65DN 65232153220105
27017512250362535G 23863510836059
98DN 80DN 80275179270114
3402101229846,52545
G 2 1/24574514353797
120DN 100DN 100
310203315142
3902302036056,53045G 351755158547174
145DN 125DN 125
337208345170
4302602541066,53050G 455565198550190
50
DA 250 K-4001109139-400
65
DA 265 K-4001109239-400
80
DA 280 K-4001109339-400
100
DA 2100 K-4001109439-400
125
DA 2125 K-1601109539-160
DA 2125 K-4001109539-400
150
DA 2150 K-1601109639-160
DA 2150 K-4001109639-400
PN 16 DIN 2633PN 40 DIN 2635
for two way flow of a mediumdesigned for non-rotating inner pipe
Flanges see page 16
DN
Type PN 16Order-No.Type PN 40Order-No.
ABCFG J K G7/h8
L + 0,3MOPSTVWZ AB -0,2NATAWeight (kg)
-
8/12/2019 Catlogo M-DA Ingls
14/20
14
DAA2 DN 50-300
50DN 40DN 4018010514465
18013010163262037552552511528524
66DN 50DN 5020612118085
23015510208312245572933013134039
80DN 65DN 65232153220105
27017512250362558653503510836059
98DN 80DN 80275179270114
3402101229846,52575704104514353797
120DN 100DN 100
310203315142
3902302036056,530888046855158547174
145DN 125DN 125
337208345170
4302602541066,5301109048865198550190
195DN 150DN 150
392235425225
52030530490723513511557470244650
240DN 200DN 200
453263510280
61039535602774016015068875300750
295DN 250DN 250
515300595340
72049040725825021517578880330860
50
DAA 250 K-4001109141-400
65
DAA 265 K-4001109241-400
80
DAA 280 K-4001109341-400
100
DAA 2100 K-4001109441-400
125
DAA 2125 K-1601109541-160
DAA 2125 K-4001109541-400
150
DAA 2150 K-1601109641-160
DAA 2150 K-4001109641-400
200
DAA 2200 K-1601109741-160
DAA 2200 K-4001109741-400
250
DAA 2250 K-1601109841-160
DAA 2250 K-4001109841-400
300
DAA 2300 K-1601109941-160
DAA 2300 K-4001109941-400
PN 16 DIN 2633PN 40 DIN 2635
for two way flow of a mediumdesigned for rotating inner pipe
DN
Type PN 16Order-No.Type PN 40Order-No.
ABCFG J K G7/h8
L + 0,3MOPST W G7/e8XZ AB -0,2NATAWeight (kg)
Flanges see page 16
-
8/12/2019 Catlogo M-DA Ingls
15/20
-
8/12/2019 Catlogo M-DA Ingls
16/20
-
8/12/2019 Catlogo M-DA Ingls
17/20
17
Other Accessories
DV G 1/2 G 1
Order No. Tmax. 160C 1190010 1190020Order No. Tmax. 200C 1190010-231 1190020-232
LV 30 30GW 22 19SW 30 41
Order No. CU seal 3511954 3511962
Vacuum Breakers
Material: brass
Toggle joints facilitate the installation ofsiphon pipes in steam-heated rollers, inparticular in narrow, long trunnion bores.
Seals when bent.
Max. temperature 160C.
Toggle joints
IG G 1/4 G 3/8 G 1/2 G 3/4 G 1 G 1 1/2 G 2
Order No. 1190100 1190110 1190120 1190130 1190140 1190150 1190160 AD 22 25 30 36 45 60 80
ET 12 15 18 20 22 30 35GL 42,5 56 63 70 74 108 138GH 31 37,5 45 50 57,5 81 104
Material: brass
Vacuum breakers protect steam-heated rollersfrom damage caused by vacuum.
The vacuum breakers are available as separateunits or built into the rotary joint (version 3).
The valve opens at a differential pressure of0.3 bar.
Max. temperatures 160 and 200C.
-
8/12/2019 Catlogo M-DA Ingls
18/20
18
-
8/12/2019 Catlogo M-DA Ingls
19/20
19
-
8/12/2019 Catlogo M-DA Ingls
20/20
D 14410 e
Christian Maier GmbH & Co. KGMaschinenfabrik
Wuerzburger Strae 67-69D-89520 Heidenheim
P.O.Box 1609D-89506 Heidenheim
+ 49 (0) 73 21 / 317-0+ 49 (0) 73 21 / 317-139 (Export)0 800 / 7 51 82 50+ 49 (0) 73 21 / 317-239
vkd @maier-heidenheim.dewww.maier-heidenheim.de
Branch Offices & Service Stations:
Maier Italia Srl
Via Enrico Toti 3I-21040 Gerenzano (VA)
+ 39-02-96 24 82 88+ 39-02-96 36 96 95
info @maier-italia.comwww.maier-italia.com
Maier America LLC
6669 Peachtree Industrial Blvd., Suite L/MNorcross, GA 30092 - USA
+ 1-770-409 0022+ 1-770-409 0069
info @maieramerica.comwww.maieramerica.com