Download - CHAPTER 1 - INTRODUCTION TO AUTOMATION
![Page 1: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/1.jpg)
1
DDE 3443 DDE 3443 INDUSTRIAL AUTOMATIONINDUSTRIAL AUTOMATION
DDE 3443 DDE 3443 INDUSTRIAL AUTOMATIONINDUSTRIAL AUTOMATION
CHAPTER 1CHAPTER 1
INTRODUCTION TO INTRODUCTION TO AUTOMATIONAUTOMATION
![Page 2: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/2.jpg)
2
INTRODUCTION
Production system: manufacturing support systems and facilities.
Mfg Support System
Facilities(Factory
Equipments)
![Page 3: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/3.jpg)
3
• Mfg. Support System - procedures used to manage prod. and
to solve logistics & technical prob.Facilities - the equipments in factory and the way
the equipment is organized. It includes machines, tooling, material handling equipment, inspection equipment, comp. & plant layout.
INTRODUCTION… cont.
![Page 4: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/4.jpg)
4
![Page 5: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/5.jpg)
5
![Page 6: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/6.jpg)
6
INTRODUCTION… cont.
• Industrial Automation:• The technology by which a process or
procedure is accomplished without human assistance.
• A technique that can be used to reduce costs and/or to improve quality.
• Can increase manufacturing speed, while reducing cost.
![Page 7: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/7.jpg)
7
• Can lead to products having consistent quality, perhaps even consistently good quality
• It is implemented using a program of instructions combined with a control system that executes the instructions.
INTRODUCTION…cont.
![Page 8: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/8.jpg)
8
• To automate a process, power is required, both to drive the process itself and to operate the program and control system.
• Automated processes can be controlled by human operators, by computers, or by a combination of the two.
INTRODUCTION…cont.
![Page 9: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/9.jpg)
9
Definition 1
• Automation is a technique that can be used to reduce costs and/or to improve qual ity. Automation can increase manufacturing speed, while reducing cost. Automation can lead to products having consistent quality, perhaps even consistently good quality.
Definition 2
• Automation is a technology concerned with application of mechanical, electronic and computer-based system to operate and control system. This technology includes;
![Page 10: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/10.jpg)
10
•Automatic assembly machines•Automation machine tools to
process parts• Industrial robots•Automatic materials handling and
storage system•Automatic inspection system and
quality control•Feedback control and computer
process control•Computer system for planning, data
collection and decision making to support manufacturing activities
![Page 11: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/11.jpg)
11
• If a human operator is available to monitor and control a manufacturing process, open loop control may be acceptable.
• If a manufacturing process is automated, then it requires closed loop control, also known as feedback control.
• example of open loop control and closed loop control.
INTRODUCTION…cont.
![Page 12: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/12.jpg)
12
Example of open loop control system
![Page 13: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/13.jpg)
13
Example of closed loop control
Temperature
instruction
![Page 14: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/14.jpg)
14
Example of closed loop control
![Page 15: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/15.jpg)
15
Arguments in favor of Automation
• Automation is the key to shorter work week – working hours per week reduces and , allowing more leisure hours and a higher quality of life.
• Automation brings safer working conditions for workers.
• Automated production results in lower prices and better products
![Page 16: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/16.jpg)
16
Arguments against Automation
• It result in the subjugation of human being by a machine – reduces the need for skilled labor
• There will be reduction in the labor force – resulting un employment.
• Automation will reduce purchasing power- markets will become saturated with products that people cannot afford to purchase.
![Page 17: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/17.jpg)
17
SOME CONSIDERATIONS
• What automation and control technology is available?
• Are employees ready and willing to use new technology?
• What technology should be used?• Should the current mfg process be
improve before automation?• Should the product be improved
before spending millions of ringgit acquiring equips.
![Page 18: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/18.jpg)
18
MANUAL LABOR IN PRODUCTION SYSTEMS
• Task is too technologically difficult to automate.
• Short product life cycle.• Customized product.• To cope with ups and downs in
demand.• To reduce risk of product failure.
![Page 19: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/19.jpg)
19
BASIC ELEMENT OF AN AUTOMATED SYSTEM
• Consists of 3 basic elements: 1) The actuator (which does the work)
• Controlled by the controller.• The actuator in a automated
process may in fact be several actuators, each of which provides an output that drives another in the series of actuator.
![Page 20: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/20.jpg)
20
•Some actuators can only be on and off. Other actuators respond proportionally with the signal they receive from a controller
•Actuators can be selected for the types of inputs they require, either DC or AC.
BASIC ELEMENT OF AN AUTOMATED SYSTEM…cont.
![Page 21: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/21.jpg)
21
2)The controller (which ‘tells’ the actuator to do work)» A controlled system either
may be a simple digital system or an analog system.
» Digital and analog controllers are available ‘off the shelf’ so that systems can be constructed inexpensive and with little specialized knowledge required.
BASIC ELEMENT OF AN AUTOMATED SYSTEM…cont.
![Page 22: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/22.jpg)
22
3) The sensor (which provides feedback to the controller so that it knows the actuator is doing work) • Obviously, controlled automation
requires devices to sense system output.
• Sensors also can be used so that a controller can detect and respond to changing conditions in its working environment.
BASIC ELEMENT OF AN AUTOMATED SYSTEM…cont.
![Page 23: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/23.jpg)
23
•Switches and transducers are another name for sensors.
•Switches can detect when a measured condition exceeds a pre-set level. Examples, closes when a work-piece is close enough to work on.
•Transducers can describe a measured condition. Examples, output increased voltage as a work-piece approaches the working zone.
BASIC ELEMENT OF AN AUTOMATED
SYSTEM…cont.
![Page 24: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/24.jpg)
24
TYPE OF AUTOMATION
• Hard Automation– Controllers were built for specific
purposes and could not be altered easily.
– Early analog process controllers had to be rewired to be reprogrammed.
![Page 25: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/25.jpg)
25
– This controllers do what they are designed and built to do, quickly and precisely perhaps, but with little adaptability for change (beyond minor adjustments).
– Modification of hard automation is time-consuming and expensive, since modifications can only be performed while the equipment sits idle.
TYPE OF AUTOMATION…cont.
![Page 26: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/26.jpg)
26
• Soft Automation– Modern digital computers are
reprogrammable.– It is even possible to reprogram them
and test the changes while they work.– Even if hardware changes are
required to a soft automation system, the lost time during changeover is less than for hard automation
TYPE OF AUTOMATION…
cont.
![Page 27: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/27.jpg)
27
• Automated Mfg. System can be classified into three basic types:
Fixed Automation– A system which the sequence of
processing (or assembly) operations is fixed by the equipment configurations.
– Each operations in the sequence is usually simple.
AUTOMATED MFG. SYSTEM
![Page 28: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/28.jpg)
28
– The features of fixed automation;•High initial investment for custom-
engineered equipment•High production rates•Relatively inflexible in
accommodating product variety.•Examples, machining transfer lines
and automated assembly machines.
AUTOMATED MFG. SYSTEM… cont.
![Page 29: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/29.jpg)
29
• Programmable Automation– The production equipment is
designed with the capability to change the sequence of operations to accommodate different product configurations.
– The operation sequence is controlled by a program, which is a set of instruction coded so that they can be read and interpreted by the system.
AUTOMATED MFG. SYSTEM… cont.
![Page 30: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/30.jpg)
30
– New programs can be prepared and entered into the equipment to produce new products.
– The physical setup of the machine must be changed for each new products.
– This changeover procedures takes time.
– Eg: numerical control (NC) machine tools, industrial robots and PLC.
AUTOMATED MFG. SYSTEM… cont.
![Page 31: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/31.jpg)
31
– The features of programmable automation;•High investment in general purpose
equipment.•Lower production rates than fixed
automation.•Flexibility to deal with variations
and changes in product configuration.
•Most suitable for batch production.
AUTOMATED MFG. SYSTEM… cont.
![Page 32: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/32.jpg)
32
• Flexible Automation– An extension of programmable
automation.– Capable of producing a variety of
parts/products with virtually no time lost for changeovers from one part style to the next.
AUTOMATED MFG. SYSTEM… cont.
![Page 33: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/33.jpg)
33
– The features of flexible automation;•High investment for custom-
engineered system.•Continuous production of variable
mixtures of products.•Medium production rates.•Flexibility to deal with product
design variations.
AUTOMATED MFG. SYSTEM… cont.
![Page 34: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/34.jpg)
34
– Examples, flexible manufacturing systems for performing machining operations. The relative positions of the three types of automation for different production volume and product varieties are shown below.
AUTOMATED MFG. SYSTEM… cont.
![Page 35: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/35.jpg)
35
Relationship between product variety & quantity
Low
Medium
High100 10000 1,000,000
![Page 36: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/36.jpg)
36
Relationship of fixed, programmable and flexible automation
![Page 37: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/37.jpg)
37
REASON FOR AUTOMATING
• To increase labor productivity• To reduce labor cost• To improve worker safety• To improve product quality• To mitigate the effects of labor
shortages• To reduce/eliminate routine
manual & clerical tasks.
![Page 38: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/38.jpg)
38
REASON FOR AUTOMATING…
cont.
• To reduce mfg lead time• To accomplish processes that
cannot be done manually• To avoid the high cost of not
automating
![Page 39: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/39.jpg)
39
MANUAL LABOR IN PROD. SYSTEM
There are situations which manual labor is usually preferred over automation:
• Task is too technologically difficult to automate.
• Short product life cycle• Customized product• To cope with ups and downs in demand• To reduce risk of product failure
![Page 40: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/40.jpg)
40
American Prod. And Inventory Control Society(APICS) gives three principles:
• Understand the existing process• Simplify the process• Automate the process
PRINCIPLES AND STRATEGIES
![Page 41: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/41.jpg)
41
STRATEGIES FOR AUTO./PROD SYSTEM
• Specialization of operation• Combined operations• Simultaneous operations• Integration operations• Increased flexibility• Improved material handling and storage• On-line inspection
![Page 42: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/42.jpg)
42
STRATEGIES FOR AUTO./PROD SYSTEM… cont.
• Improved material handling and storage• On-line inspection• Process control and optimization• Plant operations control• Computer-integrated manufacturing
![Page 43: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/43.jpg)
43
AUTOMATION CONTROL
• Usually implies a sequence of mechanical steps.
• A camshaft is an automation controller because it mechanically sequences the steps in the operation of an internal combustion engine.
![Page 44: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/44.jpg)
44
• Manufacturing processes are often sequenced by special digital computers, known as programmable logic controller (PLC).
• PLC can detect and can switch electrical signals on and off.
AUTOMATION CONTROL… cont.
![Page 45: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/45.jpg)
45
PROCESS CONTROL
• Usually implies that the product is produced in a continuous stream.
• Often, it is a liquid that is being processed.
• Early process control system consisted of specially-designed analog circuitry that measured a system’s output ( e.g., the temperature of liquid leaving a tank),
![Page 46: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/46.jpg)
46
and changed that input ( e.g., changing the amount of cool liquid mixed in) to force the output to stay at a preset value.
• Now, process control is accomplished using digital computers.
PROCESS CONTROL… cont.
![Page 47: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/47.jpg)
47
MANUFACTURING
Manufacturing – the application of physical and chemical processes to alter the geometry, properties and /or appearance of a given starting material to make parts/product
- includes the joining of multiple parts to make assembled products
![Page 48: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/48.jpg)
48
• Economic viewpoint- the transformation of material into items of greater value…
• Eg: iron converted into steel, sand transformed into glass, petroleum transforms into plastic etc.
MANUFACTURING… cont.
![Page 49: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/49.jpg)
49
Machinery Tools
Power Labor
Starting Complete part Material
Waste
As a technological process
MANUFACTURING… cont.
Mfg. Process
![Page 50: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/50.jpg)
50
MANUFACTURING… cont.
• • • Value Added• Starting material complete
part
• Material in Processing
• As an Economic process
Mfg. Process
![Page 51: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/51.jpg)
51
• Basic activities to convert raw material into finished products:
i. Processing and assembly operations ii. Material handling iii. Inspection and test
iv. Coordination and control
MANUFACTURING… cont.
![Page 52: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/52.jpg)
52
Processing and assembly operations
• Processing operation transform a work material from one state of completion to a more advanced state that is closer to the final desired part/product. materials is fed into the process, energy is apply by the machinery and tooling to transform the material into finished products.
• Assembly operations – two or more components combined to form a new entity eg: welding, soldering, screws, rivets etc.
![Page 53: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/53.jpg)
53
• Moving and storing materials between processing and/or assembly operations.
Inspection and test• Both are quality control activities to
determine whether products meet the design std. and spec.
Material handling & storage
![Page 54: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/54.jpg)
54
Coordination and control
• includes at process and plant levels• Process level – manipulating input and
parameters of the process.• Plants level – labor, maintenance,
costing, shipping, scheduling etc.
![Page 55: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/55.jpg)
55
• 4 keys parameters: i. Qualityii. Variety
iii. Complexity of assembled products iv. Complexity of individual parts.
PRODUCT/PRODUCTION RELATIONSHIPS
![Page 56: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/56.jpg)
56
Quantity and variety
Consider: Q= prod. Quantity, P=prod. Variety
: Qj=annual quantity of prod j : Qf= total quantity of all part
p
Qf = Qj, where P = total no. of diff. j=1 part, j = 1,2,3,…
![Page 57: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/57.jpg)
57
Product and Part complexity
• Complexity refer to the no.of components used to produce a product-the mere parts, the more complex.
• Let, np = the no. of part per product
no = the no. of operation/pros. Steps
The total no. of parts manufactured/year: npf=total no.of part/yr
p npf = Qjnpj Qj = annual quantity/yr
j=1 npj = no. of parts/prod
![Page 58: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/58.jpg)
58
Product and Part complexity… cont.
• The total no. of processing operations performed in the plant:
p npj
nof = Qjnpj nojk
j=1 k=1
Where; nof= total no. ofoperation cycles
nojk= no of processing operation for each part k
npj = no.of parts in product
![Page 59: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/59.jpg)
59
Product and Part complexity… cont.
Conceptualize:Consider P = no. of product design
Q = quantitiesSo, the total no. of product produced,
Qf = PQ the total no. of parts produced, npf = PQnp
the total no. of mfg operation performed, nof = PQnpno
![Page 60: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/60.jpg)
60
Example
P=100 different product, each product produced 10,000 unit/yr, each consist of 1000 components, average processing step=10/component, each processing step=1min. Determine:
- how many product- how many part- how many prod. operation- how many workers needed
![Page 61: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/61.jpg)
61
Solution
i. Total no. of unit produced, Qf = PQ100 x 10,000 = 1,000,000 prod./yr
ii. Total no of part produced = npf = PQnp 1.000.000 x 1000 = 1,000,000,000 parts/yr
iii. Prod. operation = nof =PQnpno
iv. Total time = 1,000,000,000 x 1/60=166,666,667 hr
v. Workers= 1666,6666,661/2000=83,333 workers
![Page 62: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/62.jpg)
62
Production rate
• Normally expressed as an hourly rate.• Also called operation cycle time, Tc.
Tc is defined as the time that one work unit spends being processed/assembled.
Tc = To + Th + Tth
where Tc = operation cycle time (min/pc)
To = time of actual processing/assemb.
Th = handling time (min/pc)
Tth= tool handling time(min/pc)
![Page 63: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/63.jpg)
63
Production capacity
• Is defined as the max. rate of o.p that the production facilities is able to produce under a given set of assumed operation cond.( num. of shift/day).
• Let PC = prod. Capacity, n = num. of m/c Rp = prod. Rate, H = hr/shift, S =num.
of shift/week. PC = n SH Rp
![Page 64: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/64.jpg)
64
Production capacity… cont.
• If no = num. of distinct operation through which work units are routed.
• To increase/decrease prod. Capacity: i. Short term: changes of S and H will increase prod. Capacity ii. Long term to increase capacity, change n, increase Rp and
reduce no.
PC = n SH Rp / no
![Page 65: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/65.jpg)
65
MANUFACTURING OPERATION COSTS
• Mfg costs – fixed and variable costs.• Fixed costs-remains constant for any
level of prod.• Variable costs-varies in proportion to the
level of prod.• Let TC = total annual costs (RM/yr), FC =
fixed annual costs (RM/yr), VC= variable costs (RM/pc) and Q = annual quantity produced (pc/yr).
![Page 66: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/66.jpg)
66
MANUFACTURING OPERATION COSTS… cont.
TC = FC + VC(Q)
![Page 67: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/67.jpg)
67
MANUFACTURING OPERATION COSTS… cont.
• Costs also depend on labor, materials and overhead.
• Labor costs- paid to workers• Materials costs- cost of raw materials to
produce product.• Overhead costs- factory and corporate o.heat - factory o.h to operate the factory - corporate o.h to run the factory
![Page 68: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/68.jpg)
68
MANUFACTURING OPERATION COSTS… cont.
![Page 69: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/69.jpg)
69
MANUFACTURING OPERATION COSTS… cont.
![Page 70: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/70.jpg)
70
MANUFACTURING OPERATION COSTS… cont.
• J.T Black.
![Page 71: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/71.jpg)
71
MANUFACTURING OPERATION COSTS… cont.
• Overhead rate (burden) to be calculated and to used in the following year to allocate overhead costs.
FOHR = FOHC / DLC Where FOHR = factory overhead rate FOHC = annual factory
overhead costs DLC = annual direct labor costs
![Page 72: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/72.jpg)
72
MANUFACTURING OPERATION
COSTS… cont.
• Corporate overheat rate, COHR = COHC /DLC where COHR = annual corporate
overhead rate, COHC = annual corporate
overhead costs, DLC = annual direct labor costs
DLC = annual direct labor costs
![Page 73: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/73.jpg)
73
MANUFACTURING OPERATION COSTS… cont.
• Eg:
determine a) FOHR for each plant
b) COHR
![Page 74: CHAPTER 1 - INTRODUCTION TO AUTOMATION](https://reader036.vdocuments.net/reader036/viewer/2022081507/551b1eb74a79599c718b45e6/html5/thumbnails/74.jpg)
74
MANUFACTURING OPERATION COSTS… cont.
Solution:a) FOHR1 = 2,000 / 800,000 = 250%
FOHR2 = 1,100,000 / 400,000 = 275%
b) COHR = 72,000 / 1,200,000 = 600%