![Page 1: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/1.jpg)
CHAPTER 1 MATERIAL STRUCTURE AND BINARY
ALLOY SYSTEM
![Page 2: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/2.jpg)
An element is a substance that cannot be broken down into simpler substances by ordinary chemical means. An element is a substance consisting of atoms which all have the same number of protons - i.e. the same atomic number. Elements are pure substances (are made from one type of atom only).
Examples of elements: carbon, aluminum, iron, copper, gold etc.
Element
![Page 3: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/3.jpg)
Compounds are substances consisting of two or more elements chemically combined in definite proportions by mass to give a material having a definite set of properties different from that of any of its constituent elements.
Compounds can only be separated by chemical means. Examples of compounds: NaCl, MgO, H2O Example 1: Water Hydrogen is an element. Oxygen is an element. When hydrogen and oxygen bond they make the compound water (H2O).
Compound
![Page 4: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/4.jpg)
Substances that are made from more than one type of atom combined physically but not chemically are called mixtures.
There is no chemical reaction involved in mixtures.
In a mixture, the properties of the combination are
still the properties of its components.
Mixtures can be separated by physical means.
Mixture
![Page 5: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/5.jpg)
An atom is the smallest part of an element that retains the properties of that element.
Atoms are composed of three primary particles, protons, neutrons and electrons.
In a neutral atom, there is the same number of electrons (negative charge) and protons (positive charge).
Atomic Structure
Particle Symbol Location Relative electrical
charge Actual mass in grams
Electron e- orbits the nucleus -1 9.11 x 10
-28
Proton p+ nucleus +1 1.66 x 10
-24
Neutron n0 nucleus 0 1.66 x 10
-24
![Page 6: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/6.jpg)
Lithium has 3 protons and 3 neutrons inside the nucleus with 3 electrons orbiting around the nucleus as shown below.
Example: Lithium Atom
![Page 7: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/7.jpg)
![Page 8: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/8.jpg)
1. Groups or Families a. Vertical columns containing elements with similar chemical properties
2. Periods (series) a. Horizontal rows of elements
3. Metals and Nonmetals a. A stair-step line on the table separates the metals from the nonmetals b. Metalloids (Semimetals) straddle the line and have properties of both metals and nonmetals
4. Lanthanide and Actinide Series (Inner Transition Metals) a. Metals and man-made metal elements
5. Group 1 – Alkali metals (the most reactive metal elements) (except hydrogen (H) also in
this group)
6. Group 2 – Alkaline earth metals (very reactive metal elements)
7. Group 17 – Halogens (the most reactive nonmetal elements)
8. Group 18 – Noble gases (the least reactive elements – inert and very stable)
Periodic Table
![Page 9: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/9.jpg)
CRYSTAL STRUCTURES
![Page 10: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/10.jpg)
Have you ever wondered how atoms assemble into solid structures?
How does the density of a material depend on its structures?
CRYSTAL STRUCTURES
![Page 11: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/11.jpg)
Solid materials can broadly be classified as crystalline and non crystalline (amorphous) solids.
In crystalline solid the arrangement of atoms is in a periodically repeating manner whereas no such patterns are found in a non-crystalline solid.
CRYSTAL STRUCTURES
![Page 12: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/12.jpg)
2 types of crystalline solids:
a) Single crystal : the periodic and repeated arrangement of atoms is perfect or extends throughout the entirety of the specimen without interruption.
b) Polycrystalline solid : a collective aggregate of many crystals separated by well defined boundaries.
CRYSTAL STRUCTURES
![Page 13: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/13.jpg)
As a general rule, most metals are crystalline, while ceramics and polymers may be either crystalline or non-crystalline.
CRYSTAL STRUCTURES
![Page 14: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/14.jpg)
Characteristic Crystalline Non-crystalline
Atomic arrangements
Regular and orderly manner in all three dimensions
Irregular
Fracture mechanism
Ductile manner. Solids behave elastically up to their yield points
Brittle manner. Solids do not behave elastically
Tensile strength High Low
Dislocation defects Possible Not possible
Differences between crystalline and non-crystalline solids
![Page 15: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/15.jpg)
A crystalline solid consists of a number of crystals. A crystal structure can be considered as consisting of tiny blocks which are repeated in three dimensional pattern.
Each of the tiny block (called a unit cell) is actually made from the arrangement of a small group of atoms.
Unit cell
![Page 16: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/16.jpg)
Types of crystal structure:
1) Simple cubic
2) Body centered cubic (BCC)
3) Face centered cubic (FCC)
4) Hexagonal closed packed (HCP)
Crystal Structure
![Page 17: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/17.jpg)
Simple Cubic
![Page 18: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/18.jpg)
BODY-CENTERED CUBIC CRYSTAL STRUCTURE
FIGURE 3.2 For the body-centered cubic crystal structure, (a) a hard sphere unit cell representation, (b) a reduced-sphere unit cell, and (c) an aggregate of many atoms. (Figure (c) from W. G. Moffatt, G. W. Pearsall, and J. Wulff, The Structure and Properties of Materials, Vol. I, Structure, p. 51. Copyright 1964 by John Wiley & Sons, New York. Reprinted by permission of John Wiley & Sons, Inc.)
![Page 19: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/19.jpg)
FACE-CENTERED CUBIC CRYSTAL STRUCTURE
![Page 20: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/20.jpg)
Hexagonal Closed Pack (HCP)
![Page 21: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/21.jpg)
a) Crystal : may be defined as a small body having a regular symmetry form, bound by smooth surfaces which are acquired under the action of its inter-atomic forces.
b) Space lattice: is composed of unit cells where the unit cells are stacked together endlessly to form the lattice. Each cell in the lattice is identical in size, shape and orientation with each other in the same crystal.
c) Grain : An individual crystal in a polycrystalline metal.
d) Grain Boundary: the boundary separating the two adjacent grains.
Recystallization terms
![Page 22: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/22.jpg)
Have you ever wondered why some materials behave differently from others, for example it is easy to stretch rubber but it is difficult to stretch metals?
Why metals are good electrical conductors while other non-metallic materials are poor conductors?
This is all due to the bonding of atoms.
Interatomic Bonding
![Page 23: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/23.jpg)
The bonds are developed between atoms due to forces of attraction and repulsion which keep nearby atoms in an equilibrium state.
The equilibrium means to have its electron configuration similar to that of inert gases.
Interatomic Bonding
![Page 24: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/24.jpg)
If the outermost shell is not complete with 8 electrons, atoms of most of the elements form bonds with one another to achieve this stable condition of 8 electrons at the outermost shell.
This can be achieved:
i) Atoms sharing one or more electrons with other atoms
ii) Atoms gaining one or more electrons with another atom
iii) Atoms losing one or more electrons with another atom
Interatomic Bonding
![Page 25: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/25.jpg)
3 types of primary bonds:
a) Ionic bonding
b) Covalent bonding
c) Metallic bonding
Primary Bonds
![Page 26: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/26.jpg)
It is always found in compounds that are composed of both metallic and nonmetallic elements.
Atoms of a metallic element easily give up their valence electrons to the nonmetallic atoms.
The attractive bonding forces are coulombic; that is, positive and negative ions, by virtue of their net electrical charge, attract one another.
Ionic bonding
![Page 27: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/27.jpg)
Ionic bonding is termed nondirectional, that is, the magnitude of the bond is equal in all directions around an ion.
Ionic bonding
![Page 28: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/28.jpg)
In covalent bonding stable electron configurations are assumed by the sharing of electrons between adjacent atoms.
Two atoms that are covalently bonded will each contribute at least one electron to the bond, and the shared electrons may be to belong to both atoms.
Covalent Bonding
![Page 29: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/29.jpg)
Covalent bonding is schematically illustrated in Figure 2.10 for a molecule of methane (CH4). The carbon atom has four valence electrons, whereas each of the four hydrogen atoms has a single valence electron.
Covalent Bonding
![Page 30: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/30.jpg)
Metallic bonding, the final primary bonding type, is found in metals and their alloys.
Metallic materials have one, two, or at most, three valence electrons.
With this model, these valence electrons are not bound to any particular atom in the solid and are more or less free to drift throughout the entire metal.
They may be thought of as belonging to the metal as a whole, or forming a ‘‘sea of electrons’’ or an ‘‘electron cloud.’’
The remaining nonvalence electrons and atomic nuclei form what are called ion cores, which possess a net positive charge equal in magnitude to the total valence electron charge per atom.
Metallic bonding
![Page 31: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/31.jpg)
These free electrons act as a ‘‘glue’’ to hold the ion cores together.
Metallic bonding
![Page 32: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/32.jpg)
Solidification is a phase transition in which a liquid turns into a solid when its temperature is lowered below its freezing point.
The melting point of a solid is the temperature at which it changes state from solid to liquid.
When considered as the temperature of the reverse change from liquid to solid, it is referred to as the freezing point or crystallization point.
SOLIDIFICATION
![Page 33: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/33.jpg)
Various stages in the solidification of a polycrystalline specimen are represented schematically in Figure 3.33.
SOLIDIFICATION
![Page 34: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/34.jpg)
1) Initially, small crystals or nuclei form at various positions. These have random crystallographic orientations, as indicated by the square grids.
2) As the nucleus grows, the spherical morphology becomes unstable and its shape becomes perturbed. The solid shape begins to express the preferred growth directions of the crystal.
3) The small grains grow by the successive addition from the surrounding liquid of atoms to the structure of each.
Cont.
![Page 35: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/35.jpg)
4) The solid then attempts to minimize the area of those surfaces with the highest surface energy. The dendrite thus exhibits a sharper and sharper tip as it grows.
5) As solidification proceeds, an increasing number of atoms
lose their kinetic energy, making the process exothermic. 6)The extremities adjacent grains impinge on one another as
the solidification process approaches completion.
Cont.
![Page 36: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/36.jpg)
7) As indicated in Figure 3.33, the crystallographic orientation varies from grain to grain. Also, there exists some atomic mismatch within the region where two grains meet; this area, called a grain boundary.
Cont.
![Page 37: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/37.jpg)
Cont.
![Page 38: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/38.jpg)
1) Nucleation: The initial stage in a phase transformation.
2) Dendrite : is a characteristic tree-like structure of crystals growing as molten metal freezes.
3) Grain : An individual crystal in polycrystalline metal.
Solidification phases term
![Page 39: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/39.jpg)
Figure showing dendrite structure
![Page 40: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/40.jpg)
Dendritic growth
![Page 41: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/41.jpg)
1) List the significant differences between ionic,
covalent and metallic bonds
2) List the common crystal structures in metallic
solids.
3) What is a unit cell?
Question
![Page 42: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/42.jpg)
Pure metal: contain of one type of metal’s atoms only.
Pure metals are of low strength and do not possess the required properties for engineering application.(seldom used in engineering)
Metal Alloys : Material that is composed of two or more elements, the principal one of which is a metal.
Alloying is done to increase the strength of materials.
Metals and Alloys
![Page 43: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/43.jpg)
SOLID SOLUTIONS
![Page 44: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/44.jpg)
A solid solution is formed when two metals are completely soluble in liquid state and also completely soluble in solid state.
In other words,when homogeneous mixtures of two or more kinds of atoms (of metals) occur in the solid state.
DEFINITION
![Page 45: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/45.jpg)
Solvent: the more abundant atomic form. Solute: the less abundant atomic form. Example: 1) Sterling silver (92.5 percent silver and the remainder copper) is a solid solution of silver and copper. Solvent atoms: silver Solute atoms: copper
Cont.
![Page 46: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/46.jpg)
Brass is a solid solution of copper (64 percent) and zinc ( 36 percent).
Solvent atoms: copper
Solute atoms: zinc
Example 2
![Page 47: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/47.jpg)
Solid solutions are of two types:
a) Substitutional solid solutions
b) Interstitial solid solutions
TYPES OF SOLID SOLUTIONS
![Page 48: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/48.jpg)
If the atoms of the solvent or parent metal are replaced in the crystal lattice by atoms of the solute metal, then the solid solution is known as substitutional solid solution.
Substitutional solid solutions
![Page 49: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/49.jpg)
Cont.
For example, copper atoms may substitute for nickel atoms without disturbing the F.C.C. structure of nickel.
![Page 50: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/50.jpg)
Cont.
In the substitutional solid solutions, the substitution can be either disordered or ordered.
![Page 51: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/51.jpg)
a) Crystal structure factor: For complete solid solubility, the two elements should have the same type of crystal structure i.e., both elements should have either F.C.C. or B.C.C. or H.C.P. structure.
(b) Relative size factor: As the size (atomic radii) difference between two elements increases, the solid solubility becomes more restricted.
Hume Rothery rules for the formation of substitutional solid solutions
![Page 52: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/52.jpg)
(c) Chemical affinity factor: Solid solubility is favoured when the two metals have lesser chemical affinity. If the chemical affinity of the two metals is greater, then greater is the tendency towards compound formation.
Generally,if the two metals are separated in the periodic table widely then they possess greater chemical affinity and are very likely to form some type of compound instead of solid solution.
Cont.
![Page 53: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/53.jpg)
(d) Relative valence factor: It is found that a metal of lower valence tends to dissolve more of a metal of higher valence than vice versa. For example in aluminium-nickel alloy system, nickel (lower valance) dissolves 5 percent aluminium but aluminium (higher valence) dissolves only 0.04 percent nickel.
Cont.
![Page 54: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/54.jpg)
In interstitial solid solutions, the solute atom does not displace a solvent atom, but rather it enters one of the holes or interstices between the solvent atoms.
Interstitial Solid Solutions
![Page 55: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/55.jpg)
Example: Iron-Carbon System
In this system the carbon (solute atom) atom occupies an interstitial position between iron (solvent atom) atoms. Normally, atoms which have atomic radii less than one angstrom are likely to form interstitial solid solutions. Examples are atoms of carbon (0.77 A°),nitrogen (0.71 A°), hydrogen (0.46 A°), Oxygen (0.60 A°) etc.
![Page 56: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/56.jpg)
![Page 57: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/57.jpg)
1. Define solid solution and explain the types of solid solutions.
2. Distinguish between substitutional solid solutions and interstitial solid solutions.
QUESTIONS
![Page 58: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/58.jpg)
Solidification for pure metal
![Page 59: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/59.jpg)
Solidification for metal alloy
![Page 60: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/60.jpg)
Binary Alloy System
![Page 61: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/61.jpg)
10
• Phase diagram:
Cu-Ni system.
• System is:
--binary i.e., 2 components:
Cu and Ni.
--isomorphous i.e., complete
solubility of one
component in
another; a phase
field extends from
0 to 100wt% Ni.
Adapted from Fig. 9.3,
Callister 6e.
• Consider
Co = 35wt%Ni.
Cu-Ni
system
EX: COOLING IN A Cu-Ni BINARY
![Page 62: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/62.jpg)
Phase: may be defined as a homogeneous portion of system that has uniform physical and chemical characteristics.
Composition: the relative content of a particular element or constituent within an alloy, usually expressed in weight percent or atom percent.
Liquidus: Line on the phase diagram that indicates the temperature above which only liquids are stable.
Equilibrium Phase Diagram Terms
![Page 63: Chapter 1: Material Structure and Binary Alloy System](https://reader034.vdocuments.net/reader034/viewer/2022042522/55a77ae51a28ab4c4e8b468c/html5/thumbnails/63.jpg)
What is a binary phase diagram and what information can we obtain from it?
Question