319
Point drainage
ACO balcony and terrace drains
Stainless steel, material grade 304 ■
Nominal width: DN 50 – DN 100 ■
As a single and direct drainage system ■
For balconies and terraces ■
With or without a seal ■
Line drainage
ACO facade and terrace Profiline
Stainless steel and galvanized steel ■
Overall width between 100 – 500 mm ■
Height-adjustable between 55 – 168 mm ■
319
8
K9/1
Balcony and terrace drainage
Balcony and terrace drainage
Chapter contents
PageBasics 322Applications and solutions 323
Single drains Drain body DN 50 – DN 70 Stainless steel single drains 326
Direct drains
Drain body DN 50 – DN 100Stainless steel direct drains 330
Direct drain with stainless steel cap 332
Accessories 333
Drain body DN 70 – DN 100Stainless steel direct drains 334
Accessories 336
Balcony and terrace drainage Point drainage
321321
PageBasics 322Applications and solutions 323
Single drains Drain body DN 50 – DN 70 Stainless steel single drains 326
Direct drains
Drain body DN 50 – DN 100Stainless steel direct drains 330
Direct drain with stainless steel cap 332
Accessories 333
Drain body DN 70 – DN 100Stainless steel direct drains 334
Accessories 336 Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Point drainage
Balcony and terrace drainage Point drainage
Section contents
322
Bal
con
y/te
rrac
e d
rain
age
Spo
t d
rain
age
8
K9/1
Spot drainagePlanning references
Balcony and patio drainage Spot drainage
Basics
The planning and execution of the balcony and terrace drainage in housing demand a high degree of individual customization from architects and processors. Regardless of the functional seal of the terrace or the design of the floor construction with an integration of downspouts on balconies from an aesthet-ic point of view, the object-specific condi-tions and customer needs must always be taken into account. The product range for the balcony and terrace drainage by ACO provides a remedy: Here you will find the best drain solution for every applica-tion that ensures the easy adjustment of all technical and visual aspects. The balcony and terrace drainage therefore harmoniously fits into the appearance of a building. Material All balcony and terrace drains are made of stainless steel, material grade 304. The extremely low thermal expansion of the material will save otherwise conventional expansion compensation material - includ-
ing concreting and sealing. Products The product range of ACO Haustechnik include single drains that are suitable for individual terraces / balconies, as well as direct drains that allow the pooling of sev-eral balcony drains. Both drain types can be supplied with a reinforcement flange for the installation without a seal or with compression-sealing flanges for sealing membranes. Standards The single or direct drains are made in conformity with EN 1253. Installation recommendations In addition to the installations shown in the EBV document, you will find installa-tion recommendations in dwg, dxf and pdf formats at www.aco-haustechnik.de.
Modular structure Planning modern balcony and terrace drains requires various application solutions depending on the installation situation. Based on this reason, the balcony and terrace drain product range by ACO Haustechnik is designed modular. The drain bodies are the planning principle. Depending on the model, the drains are available with vertical or horizontal drain sockets. Depending on the model, the drain bodies can be combined with intermediate sections and various top systems. The proper drain solution can therefore be produced for any application and floor structure.
Insulation If drains are delivered in an insulated ver-sion, the insulation is carried out with CFC-free polyurethane foam with the following characteristics:
Bulk density 50 – 55 kg/m³ ■
Heat conductivity: 0.032 W/(mk) ■
Foam structure: 85 – 95 % closed cells ■
Water vapour resistance factor: ■
30 – 80 μ Water absorption: 2 - 5 % ■
System Single drain
System Direct drain
323
Bal
con
y/te
rrac
e d
rain
age
Spo
t d
rain
age
8
K9/1
Spot drainagePlanning references
Balcony and patio drainage Spot drainage
Applications and solutions
The variety and possible combination of ACO balcony and terrace drains is ideal for use in all possible applications. Balcony drains can therefore be combined with compression-sealing flanges for film seals via suitable pipe systems and downpipe ducts as illustrated on the left. The right illustration shows a combined drainage system of several balcony drains without a seal.
Application: Balcony plates without moisture seal
With cement screed flooring or poured asphalt
The single stainless steel drain with reinforced flange is inserted in the balcony plate. The cement floor covering is flush with the round height adjustable plastic grating.
The direct stainless steel drain with reinforced flange is inserted in the balcony plate. A circular filter is also available in addition to a round stainless steel grating. This allows the downpipe connection of higher balcony areas, where the positions of the corresponding balcony drains must be coordinated.
The ACO direct balcony drains Speed have a very high priority in redevelopment. They are ideally suited for the installation in superimposed balconies, either for the in-stallation into an already assembled drain (if its diameter is large enough), or for the installation in boreholes. The balcony plate is finally coated according to the thin bed method.
Balcony plate of finished concrete parts or in situ concrete with exposed concrete surface
The direct stainless steel drain with bell is generally already inserted in the balcony plate in the precast concrete plant.
A circular filter is also available in addition to a round stainless steel grating. This allows the downpipe connection of higher located balcony areas, where the posi-tions of the corresponding balcony drains must be coordinated.
324
Bal
con
y/te
rrac
e d
rain
age
Spo
t d
rain
age
8
K9/1
Spot drainagePlanning references
Balcony and patio drainage Spot drainage
Application: Balcony plates with moisture seal
Balcony plate with plate cover on plate beds or support gravel (drainage in one or two levels)
This stainless steel single drain with compression-sealing flange is inserted in the balcony plate, where the rotating top section is placed flush to the floor cover. Any surface water that leaks through the floor cover accumulates below the tile cover on the sealing level and is channelled from here to the drain body via the the weeping holes in the flange.
Balcony plate with plate cover on plate beds or support gravel (drainage in two levels)
This stainless steel single drain with compression-sealing flange is inserted in the balcony plate, where the rotating top section including intermediate piece with filter holes is placed flush to the floor cover. Any surface water that leaks through the floor cover accumulates below the tile cover on the sealing level and is channelled from here to the drain body via the the intermediate piece with weeping holes.
With tiled flooring with a mortar bed (drainage in one or two lev-els) - for downpipe ducts/ upper balconies
The direct stainless steel drain with compression-sealing flange is inserted in the balcony ceiling. The rotating top section is placed flush to the floor. In addition to a stainless steel grating, a stainless steel grating for downpipe ducts is also available. This allows the downpipe connection of higher balcony areas, where the positions of the corresponding balcony drains must be coordinated. Any surface water that leaks through the floor cover accumulates below the tile floor on the sealing level and is channelled from here to the drain body via the the flange.
Balcony plate with plate cover on plate beds or support gravel (drainage in two levels) - for downpipe ducts/top balconies
The direct stainless steel drain with compression-sealing flange is inserted in the balcony ceiling. The rotating top section with screen holes is placed flush to the floor. In addition to a stainless steel grating, a stainless steel grating for downpipe ducts is also available. This allows the downpipe connection of higher balcony areas, where the positions of the corresponding balcony drains must be coordinated. Any surface water that leaks through the floor cover accumulates below the tile cover on the sealing level and is channelled from here to the drain body via the the intermediate piece with weeping holes.
325
Bal
con
y/te
rrac
e d
rain
age
Spo
t d
rain
age
8
K9/1
Spot drainagePlanning references
Balcony and patio drainage Spot drainage
Application: Balcony plates or terrace floor with moisture seal
Tile flooring in the mortar bed or with plate flooring on support gravel or plate beds (drainage at one or two levels)
The two-part stainless steel single drain consists of a drain body and top section, always with a compression-sealing flange. The rotating top section is placed flush to the floor. Any surface water that leaks through the floor cover accumulates below the tile floor on the top sealing level and is channelled from here to the drain body via the the flange.
Plate floor on plate beds or sup-port gravel (drainage in two levels)
The two-part stainless steel single drain consists of a drain body and top sec-tion, always with a compression-sealing flange. The rotating top section including the intermediate piece with screen holes is placed flush to the floor. Any surface water that leaks through the floor cover accumulates below the tile cover on the top sealing level and is channelled from here to the drain body via the the screen holes of the intermediate piece.
Tile floor in the mortar bed (drain-age on one level) or plate floor on support gravel or plate beds (drainage in one or two levels)
The direct stainless steel drain with compression-sealing flange is inserted in the balcony ceiling. The top section with compression-sealing flange is aligned according to the floor structure, then the rotating stacking piece is placed flush on the floor cover. In addition to a stainless steel grating, a stainless steel grating for downpipe ducts is also available. This allows the downpipe connection of higher balcony areas, where the positions of the corresponding balcony drains must be coordinated. Any surface water that leaks through the floor cover accumulates below the tile floor on the sealing level and is channelled from here to the drain body via the the flange.
Plate floor on support gravel or plate beds (drainage in two levels)
The direct stainless steel drain with compression-sealing flange is inserted in the balcony ceiling. The top section with compression-sealing flange is aligned ac-cording to the floor structure, then the ro-tating stacking piece with screen holes is placed flush on the floor cover. Stainless steel grating for downpipe ducts is also available in addition to a stainless steel slotted grating. This allows the downpipe connection of higher balcony areas, where the positions of the corresponding balcony drains must be coordinated. Any surface water that leaks through the floor cover accumulates below the tile cover on the sealing level and is channelled from here to the drain body via the the screen holes of the stacking section.
326
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Single drainsDrain body DN 50/DN 70
Balcony and terrace drainage Point drainage
Stainless steel single drains
Product information
ACO product advantages
Adaption to structural circumstances ■
via modular systemStainless steel, material grade 304 ■
Single drain ■
Nominal width: DN 50/DN 70 ■
Certified in accordance with EN 1253 ■
For concreting ■
Drain body with socket flange
Specific product information
For balcony covers without moisture ■
seal
Ordering information
Nominal width
in accor-dance with
DIN
Dimensions Weight Article No.
d1 h[l/s] [mm] [mm] [kg]
Socket inclination: 90°
1,5
h
Ø198
Ø102
d1
DN 50 3,1 53 250 1,05 0174.43.55
DN 70 7,5 73 250 1,25 0174.43.56
Socket inclination: 1,5°
260
hd1
1,5
Ø198
Ø102
DN 50 2,2 53 90 1,57 0174.43.57
DN 70 5,5 73 110 1,87 0174.43.58
327
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Single drainsDrain body DN 50/DN 70
Balcony and terrace drainage Point drainage
Drain body with fixed flange non-insulated
Specific product information
For balcony covers with moisture seal ■
Ordering information
No-minal width
in accor-dance with DIN
Dimensions Weight Article No.
d1 h h2 l1 l2[l/s] [mm] [mm] [mm] [mm] [mm] [kg]
Socket inclination: 90°
d1
Ø290
30l2
95
DN 50 3,1 53 165 1,48 0174.43.73
DN 70 7,5 73 180 1,6 0174.43.74
Socket inclination: 1,5°
Ø110l1
hd1h2
Ø290
30
DN 50 2,2 53 75 95 170 1,75 0174.44.05
DN 70 5,5 73 85 115 185 2,0 0174.44.06
Drain body with fixed flange - insulated
Specific product information
For balcony covers with moisture seal ■
Ordering information
No-minal width
in accor-dance with DIN
Dimensions Weight Article No.
d1 h h3 l1 l2 m12[l/s] [mm] [mm] [mm] [mm] [mm] [mm] [kg]
Socket inclination: 90°
Ø190
d1
Ø290
135
30l2
m12
DN 50 3,1 53 165 30 1,86 0174.43.78
DN 70 7,5 73 180 45 1,8 0174.43.79
Socket inclination: 1,5°
ca.3
0
h3
Ø110
d1
Ø290
Ø130
l1
h
240
m12
Ø190 m12
2°
DN 50 2,2 53 75 130 170 30 2,0 0174.44.07
DN 70 5,5 73 85 150 185 45 2,2 0174.44.08
328
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Single drainsDrain body DN 50/DN 70
Balcony and terrace drainage Point drainage
Accessories
Designation compatible with Description Article No.
Ø73
Ø8545 50
GratingBalcony and terrace drains ■
Single drain body DN 50/ �DN 70
Plastic ■
Diameter: 85 mm ■
Grating cross section 21.2 cm² ■
Weight: 0.05 kg ■
0174.43.45
7,5
7,5
□R
Grating
Grating support ■
0174.43.20 �0174.43.22 �0174.43.24 �0174.43.47 �0174.43.48 �
Stainless steel ■
Grating dimensions (R): ■
117 x 117 mmWeight: 0.3 kg ■
0174.52.58
Ø73
127
118
125
Grating supportBalcony and terrace drains ■
Single drain body DN 50/ �DN 70
Plastic ■
Frame dimensions: ■
125 x 125 mmWeight: 0.11 kg ■
0174.43.46
Ø290
Ø110
Ø73
115
30
58
Stacking elementBalcony and terrace drains ■
Single drain body DN 70/ �DN 100
With fixed flange ■
Weight: 1.6 kg ■0174.43.92
Ø220
28,5
Ø130
Loose flangeBalcony and terrace drains ■
Single drain body DN 50/ �DN 70
Without seepage openings ■
Stainless steel, material grade ■
304Includes seal element DN 70 ■
Weight: 0.65 kg ■
0174.43.75
Ø220
28,5
Loose flangeBalcony and terrace drains ■
Single drain body DN 50/ �DN 70
With seepage openings ■
Stainless steel, material grade ■
304Includes sealing element DN 70 ■
Weight: 0.65 kg ■
0174.43.76
Ø224Ø138Flange seal
Balcony and terrace drains ■
Single drain body DN 50/ �DN 70
EPDM rubber ■
Thickness: 1.5 mm ■
Weight: 0.02 kg ■
0174.43.77
329
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Single drainsDrain body DN 50/DN 70
Balcony and terrace drainage Point drainage
Designation compatible with Description Article No.
Ø73
1286
Filter pipeBalcony and terrace drains ■
Single drain body DN 50/ �DN 70
Stainless steel, material grade ■
304Shape: curved ■
Includes seal element DN 70 ■
Weight: 0.3 kg ■
0174.43.49
130
□123
Ø73
10
Ø71
Grating supportBalcony and terrace drains ■
Single drain body DN 50/ �DN 70
Stainless steel, material grade ■
304With plastic coating ■
Frame dimensions: ■
123 x 123 mmWeight: 0.11 kg ■
0174.43.47
□123
Ø73
6
165
10
Grating supportBalcony and terrace drains ■
Single drain body DN 50/ �DN 70
Stainless steel, material grade ■
304With filtration holes ■
Frame dimensions: ■
123 x 123 mmWeight: 0.42 kg ■
0174.43.48
Lagging cap Balcony and terrace drains ■
DN 50 – DN 100 �
Polystyrene ■
Can be slid on ■
Weight: 0.2 kg ■
DN 50 0174.43.50
DN 70 0174.43.51
330
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 50 – DN 100
Balcony and terrace drainage Point drainage
Stainless steel direct drains
Product information
ACO product advantages
Adaption to structural circumstances ■
via modular systemStainless steel, material grade 304 ■
Drain body DN 50 – DN 100 ■
Stainless steel, material grade 304 ■
Certified in accordance with EN 1253 ■
For balcony covers without moisture ■
seal
Drain body with socket flange
Specific product information
For paving or melted asphalt ■
Height: 20 mm �
For ring filter/filter protective cover ■
Ordering information
No-minal width
Dimensions Weight Article No.
d1 d2 d3 l1 l2[mm] [mm] [mm] [mm] [mm] [kg]
DN 50 53 98 198300 310 1,25 0174.42.79
3000 3010 6,65 0174.42.82
DN 70 73 117 280300 312 2,0 0174.42.80
3000 3012 9,9 0174.42.83
DN 100 102 140 280300 312 2,9 0174.42.81
3000 3012 16,85 0174.42.84
Drain body with socket rim
Specific product information
Sealing with liquid plastic ■
Thickness: 2 mm �
For ring filter/filter protective cover ■
Installation length: 300 mm ■
Ordering information
No-minal width
Dimensions Weight Article No.
d1 d2 d3 l1 l2[mm] [mm] [mm] [mm] [mm] [kg]
DN 50 53 98 190 300 312 1,0 0174.42.73DN 70 73 117 190 300 312 1,5 0174.42.74
DN 100 102 140 245 300 313 3,2 0174.42.75
d2
d1
d3
20l2 l1
d1
d2d3
l2
l1
331
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 50 – DN 100
Balcony and terrace drainage Point drainage
Speed drain body with socket flange
Specific product information
Sealing with liquid plastic ■
Thickness: 2 mm �
Installation length: 300 mm ■
Ordering information
Nominal width Dimensions Weight Article No.d1 l1
[mm] [mm] [kg]DN 50 53 320 0,68 0174.42.77DN 70 73 310 1,22 0174.42.78
19
Ø124
d1
l1
332
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 50 – DN 100
Balcony and terrace drainage Point drainage
Direct drain with stainless steel cap
Product information
ACO product advantages
Adaption to structural circumstances ■
via modular systemStainless steel, material grade 304 ■
Drain body DN 50 – DN 100 ■
Stainless steel, material grade 304 ■
For in-situ concrete or pre-cast concrete ■
componentsThickness balcony plate: 120, 140, �
160, 180 or 200 mmFor ring filter/filter protective cover ■
Filter not height-adjustable �
Drain body with socket flange
Ordering information
No-minal width
Dimensions Weight Article No.
d1 d2 d3 d4 l1 l2[mm] [mm] [mm] [mm] [mm] [mm] [kg]
DN 50 53 102 98 73
110 120 1,05 0174.52.63130 140 1,15 0174.52.66150 160 1,26 0174.52.69170 180 1,36 0174.52.75190 200 1,47 0174.52.78
DN 70 73 121 117 102
108 120 1,15 0174.52.64128 140 1,32 0174.52.67148 160 1,49 0174.52.70168 180 1,66 0174.52.76188 200 1,83 0174.52.79
DN 100 102 145 140 133
112 120 1,8 0174.52.65132 140 2,08 0174.52.68152 160 2,36 0174.52.71172 180 2,65 0174.52.77190 200 2,93 0174.52.80
l2
d3
d2
d4
d1
l1
333
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 50 – DN 100
Balcony and terrace drainage Point drainage
Accessories
Designation compatible with Description Article No.Ø
97
Ø7
9
Filter
Balcony and terrace drains ■
Direct drainage with socket �flange and capDN 50 – DN 100 �
Stainless steel ■
Weight: 0.1 kg ■
DN 50 0174.52.47
DN 70 0174.52.48
DN 100 0174.52.49
Ø97
,5
Ø7
Ø54
,510
Ring filterBalcony and terrace drains ■
Direct drain body �DN 50 – DN 100 �
Stainless steel ■
Weight: 0.1 kg ■
DN 50 0174.52.51
DN 70 0174.52.56
DN 100 0174.52.57
334
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 70/DN 100
Balcony and terrace drainage Point drainage
Stainless steel direct drains
Product information
ACO product advantages
Adaption to structural circumstances ■
via modular systemStainless steel, material grade 304 ■
Drain body DN 70 – DN 100 ■
Stainless steel, material grade 304 ■
Certified in accordance with EN 1253 ■
For balcony covers with moisture seal ■
With/without thermal insulation ■
Drain body with fixed flange non-insulated
Ordering information
No-minal width
Dimensions Weight Article No.
d1 h h2 l1 l2[mm] [mm] [mm] [mm] [mm] [kg]
Socket inclination: 90°Ø350
d1
30113
l2
Ø170Ø310
DN 70 73 191 2,95 0174.44.35
DN 100 102 206 3,0 0174.44.36
Socket inclination: 1,5°
h2
l1
Ø350
30
hd1
34
Ø170
1,5°
DN 70 73 90 121 220 3,0 0174.44.58
DN 100 102 104 150 230 3,85 0174.44.59
335
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 70/DN 100
Balcony and terrace drainage Point drainage
Drain body with fixed flange - insulated
Ordering information
No-minal width
Dimensions Weight Article No.
d1 h h2 h3 l1 l2 m12[mm] [mm] [mm] [mm] [mm] [mm] [mm] [kg]
Socket inclination: 90°
d1
Ø310
m12
3014
6l2
Ø350
Ø170Ø260
DN 70 73 191 45 3,15 0174.44.40
DN 100 102 206 60 3,2 0174.44.41
Socket inclination: 1,5°
l1
h2
Ø350
30h3
hd1
Ø170
1,5°
DN 70 73 90 121 160 220 45 3,2 0174.44.60
DN 100 102 104 150 185 230 60 4,05 0174.44.61
336
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 70/DN 100
Balcony and terrace drainage Point drainage
Accessories
Designation compatible with Description Article No.
306820
0
Ø133Ø170Ø310
Ø350
Stacking elementBalcony and terrace drains ■
Direct drain body DN 70/ �DN 100
Stainless steel, material grade ■
304With compression-sealing flange ■
Weight: 2.7 kg ■
0174.48.64
28,5 Ø280
Loose flangeBalcony and terrace drains ■
Direct drain body DN 70/ �DN 100
Stainless steel, material grade ■
304Without seepage openings ■
Includes sealing element ■
DN 125Weight: 1.1 kg ■
0174.44.37
28,5 Ø280
Loose flangeBalcony and terrace drains ■
Direct drain body DN 70/ �DN 100
Stainless steel, material grade ■
304With seepage openings ■
Weight: 1.1 kg ■
DN 70Inc. sealing element: DN 100
0174.44.38
DN 100Inc. sealing element: DN 125
0174.44.39
t=1,5
Ø198Ø284
Flange sealBalcony and terrace drains ■
Direct drain body DN 70/ �DN 100
EPDM rubber ■
Thickness: 1.5 mm ■
Weight: 0.02 kg ■
0174.48.59
Ø102
2906
Filter pipeBalcony and terrace drains ■
Direct drain body DN 70/ �DN 100
Stainless steel, material grade ■
304Shape: curved ■
Includes seal element ■
Weight: 0.5 kg ■
0174.84.38
10
□R
138
DN
Grating supportBalcony and terrace drains ■
Direct drain body DN 70/ �DN 100
Plastic ■
Weight: 0.2 kg ■
DN 70Frame dimensions:
125 x 125 mm
0174.43.20
DN 100Frame dimensions:
150 x 150 mm
0174.43.21
10
□R
138
DN
Grating supportBalcony and terrace drains ■
Direct drain body DN 70/ �DN 100
Stainless steel, material grade ■
304With plastic coating ■
Weight: 1 kg ■
DN 70Frame dimensions (R):
123 x 123 mm
0174.43.22
DN 100Frame dimensions (R): 148
x148 mm
0174.43.23
337
Bal
con
y an
d t
erra
ce d
rain
age
Po
int
dra
inag
e
8
K9/1
Direct drainsDrain body DN 70/DN 100
Balcony and terrace drainage Point drainage
Designation compatible with Description Article No.
DN
1013
8
□6
□RGrating support
Balcony and terrace drains ■
Direct drain body DN 70/ �DN 100
Stainless steel, material grade ■
304With filtration holes ■
Weight: 0.5 kg ■
DN 70Frame dimensions (R):
123 x123 mm
0174.43.24
DN 100Frame dimensions (R):
148 x 148 mm
0174.43.26
7,5
7,5
□R
Grating
Grating support ■
0174.43.20 �0174.43.22 �0174.43.24 �0174.43.47 �0174.43.48 �
Stainless steel ■
Weight: 0.3 kg ■
Grating dimensions (R): ■
117 x 117 mm
0174.52.58
7,5
7,5
□R
Grating
Grating support ■
0174.43.21 �0174.43.23 �0174.43.26 �
Stainless steel ■
Weight: 0.3 kg ■
Grating dimensions (R): ■
142 x 142 mm
0174.52.59
□R
Ø74
Ø6
7,5
Grating
Grating support ■
0174.43.20 �0174.43.22 �0174.43.24 �0174.43.47 �0174.43.48 �
Stainless steel ■
Weight: 0.3 kg ■
Grating dimensions (R): ■
117 x 117 mm
0174.52.60
□R
Ø74
Ø6
7,5
Grating
Grating support ■
0174.43.21 �0174.43.23 �0174.43.26 �
Stainless steel ■
Weight: 0.3 kg ■
Grating dimensions (R): ■
142 x 142 mm
0174.52.61
Lagging cap Balcony and terrace drains ■
DN 50 – DN 100 �
Polystyrene ■
Can be slid on ■
Weight: 0.2 kg ■
DN 70 0174.43.51
DN 100 0174.43.52
PageBasics 340Planing references 342
Facade channel Profiline
Galvanized steel
Facade channel elements 346
Gratings for facade channels 348
Tops and gratings for roof drains 350
Accessories 351
Stainless steel, material grade 304
Facade channel elements 352
Gratings for facade channels 354
Tops and gratings for roof drains 358
Accessories 359
Balcony and terrace drainage Line drainage
Hinweis: @@ Dies ist eine Infobox-VORLAGEZubehör AAAAA ➔ Seite xxx.Zubehör BBBBB ➔ Seite xxx.
Infobox
339339
PageBasics 340Planing references 342
Facade channel Profiline
Galvanized steel
Facade channel elements 346
Gratings for facade channels 348
Tops and gratings for roof drains 350
Accessories 351
Stainless steel, material grade 304
Facade channel elements 352
Gratings for facade channels 354
Tops and gratings for roof drains 358
Accessories 359
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Line drainage
Balcony and terrace drainage Line drainage
Section contents
340
Bal
con
y/te
rrac
e d
rain
age
Lin
e d
rain
age
8
K9/1
Line drainagePlanning references
Balcony and patio drainage Line drainage
Basics
Technical perfection up to the last detail
The facades and patio-drainage channels ACO ProfiLine are suitable for use in green as well gravelled and paved areas. The door connection height in balcony and terrace areas can be easily reduced to 50 mm by these channels according to the flat roof guidelines. The system is available in an infinitely adjustable building height and a fixed building height. The height can also easily be adjusted from above in the installed condition by using a screwdriver. Uneven ground can thereby be easily adjusted. The pre-assembled channel elements have no loose parts, the channel strands can therefore be very economically assembled in the modular system. The connection between the
individual elements is accomplished by a simple plug-in system. This guarantees additional accuracy when processing sensitive seals. The laterally introduced 4 mm drainage slots are routed up to the bottom edge to ensure optimal drainage. An additional gravel strip is not required. The fully enclosed channel bottom guarantees maximum stability and load distribution. Punching the delicate seal is prevented and lining the channel body on-site is much easier. The cover gratings are locked by a factory pre-assembled locking system. All system components are available in stainless steel and galvanized steel.
The pre-assembled channels have a maximum length of 1,000 mm and can be easily transported and temporarily stored on the construction site without tools. The compensating elements can produce a continuous length adjustment of the channel bodies, generally without cutting on-site. The rain water can be quickly and control-led channelled to the ACO flat roof drains by the ACO Profiline channel combination and is safely and quickly drained here from the roof area. The builder is offered a higher degree of security in today's heavy rain events by the ACO Profiline channels and the ACO flat roof drains.
Door connections, for example, on balconies, loggias or terraces
DIN 18195 Part 5 "sealing against pressing water," states that the seal on connecting higher components of hori-zontal or slightly inclined surfaces must generally be moved up 150 mm above the surface of the protective layer, the coating or the cover material. The flat roof guideline shows a legally secured method.
According to this directive, the door con-nection height may be reduced to 50 mm in exceptional cases, if a perfect water drainage is guaranteed at all times in the door area. This cannot be guaranteed by a flat roof drain alone, since the distance of roof openings to the wall connections must equal at least 30 mm according
to the flat roof guidelines. ACO Profiline certainly solves this sensitive detail. The door connection can be reduced to less than 50 mm from the top cover up to the top edge of the seal
Requirements for a barrier-free construction
A threshold must be partially waived for handicapped accessible buildings with respect to the wheelchair accessibility in the entrance and exit area. In accordance with DIN 18024/18025, lower door stops
and thresholds must be basically avoided. As far as technically required, they may not be higher than 2 cm. But connections flush with the adjacent areas
can also be safely created with ACO Pro-filine. However, they do not comply with applicable regulations. If such versions are required, it must be agreed separately.
341
Bal
con
y/te
rrac
e d
rain
age
Lin
e d
rain
age
8
K9/1
Line drainagePlanning references
Balcony and patio drainage Line drainage
Technical information
Material
Galvanized steel ■
Stainless steel grade 304 ■
due to external environmental factors, we recommend the use of stainless steel
Design
Channel body body with integrated ■
gravel stripContinuously variable height adjustment ■
Completely pre-assembled components ■
Channel strands can be assembled in a ■
modular systemAll components have lateral 4 mm drain ■
slotsNo loose parts ■
Closed channel bottom, in which the 4 ■
mm drain slots are routed up to the bot-tom edge to prevent standing water
Channel elements enable the water ■
accumulation from above and from the sideFactory-assembled front walls without ■
screw attachment with building height adjustment on the overall system Length adjustment possible without cut- ■
ting the channel body on the construc-tion site by the compensating element Continuous closed channel bottom ■
Load bearing capacity
Accessible/wheelchair accessible ■
Connection
Tongue and groove joint ■
Grating stop
Locking the cover grating with a factory ■
pre-assembled locking system (except attachment for roof drains)
Special applications
According to flat roof guidelines, 10.3 ■
(4), the door connection height may be reduced to 50 mm in exceptional cases, if a perfect water drainage is guaranteed at all times in the door area. This is guaranteed by the ACO Profiline system
Application range
Balconies / loggias ■
Terraces ■
Green roofs / roof gardens ■
Flat roofs ■
before ascending facades ■
Reducing the door connection height to 50 mm
Specifically in the sensitive door and façade area must be guaranteed at all times that no moisture can penetrate from the outside. The connection height for
building sealing of 150 mm required in DIN 18195-5 can be reduced to 50 mm by using ACO line drainage systems in the door area.
342
Bal
con
y/te
rrac
e d
rain
age
Lin
e d
rain
age
8
K9/1
Line drainagePlanning references
Balcony and patio drainage Line drainage
ACO Profiline - Safely drain facades and terraces
The requirements for the building meas-ures to protect against water penetration in public buildings have risen sharply. Es-pecially drainage systems at the entrance and exterior area support the protection of buildings against water penetration. In addition, terraces, balconies and flat roofs must be permanently protected from the weather. Line drainage systems that drain the precipitation in the drain layer have been successful. The critical point in drainage is the transition from the building to the terrace, balcony or the flat roof. This specifically applies to the sensitive door and facade area, where a guarantee must be available at all times that moisture cannot penetrate from outside. The connecting height for building seals of 150 mm required in DIN
18 195 part 5 can be reduced to 50 mm by special systems such as the ACO facade and terrace channels according to the flat roof line. They prevent that water is pushed upward on these endangered areas by the wind or that it accumulates there. The development of snow drifts, slush and ice must also be taken into account when planning. Snow drifts thaw especially in front of doors due to the increased heat radiation. In addition, the discharge of condensate may not be restricted by the remaining snow or slush. The hydraulic capacity of facade channels is significantly affected by the installation situation and the cover gratings. This has been clearly demonstrated in extensive hy-draulic studies. Free water drainage is the decisive factor in the area of accessible
thresholds. The basis of the studies was a 1,000 mm long facade channel with a structural height of 75 mm, a width of 130 mm and a mesh grating of 30 x 10 mm. The channel bodies with the inserted mesh grating of 30 x 10 mm were checked in the first hydraulic test series. The various installation situations - elevated floor cover, drainage mats, branch channel, gravel bed - were simulated in the second hydraulic test series. The result of the study is an immediate calculation basis for the drained facade area. A channel system with a free cross-section, which is an elevated plate layer, therefore provides 2.5 l / sec x m. In comparison, only 0.2 l/sec x m are pos-sible at the installation with a plate layer in the gravel bed.
343
Bal
con
y/te
rrac
e d
rain
age
Lin
e d
rain
age
8
K9/1
Line drainagePlanning references
Balcony and patio drainage Line drainage
Building seal - summary of DIN standards and professional regulations
A 150 mm connecting height on doors, glass fronts and such over the surface of the covering is possible without additional measures.
DIN 18195, Part 5, paragraph 8.1.5 ■
Sealing of slightly tilted surfaces (sta-tus: 08/2000)Regulations for roofs with seal (flat roof ■
guideline), paragraph 5.3 (1) Connec-tions on doors, Image 6.1 (Status: 09/2003)FLL (Forschungsgesellschaft Land- ■
schaftsentwicklung Landschaftsbau e.V.), paragraph 4.1.4. Connections and finishes (Status: 05/2005)
A 50 mm connecting height on doors, glass fronts and such over the surface of the covering is possible
with additional measures.
Regulations for roofs with seal (flat roof ■
guideline), paragraph 5.3 (2) Reducing connections on doors, paragraph 6.2 – 6.4 (Status: 09/2003) FLL (Forschungsgesellschaft Land- ■
schaftsentwicklung Landschaftsbau e.V.), paragraph 4.1.4 Arrangement of seals on doors, glass fronts and such (Status: 05/2005)
344
Bal
con
y/te
rrac
e d
rain
age
Lin
e d
rain
age
8
K9/1
Line drainagePlanning references
Balcony and patio drainage Line drainage
Results of hydraulic testing of the ACO Profiline System
Building width 100
mm I/(sec x m)
Building width
130 mm I/(sec x m)
Building width 250
mm I/(sec x m)
Comments
Fixed building height 50 mm mesh grating 30/10 – 1,15 – no spray application
Fixed building height 75 mm mesh grating 30/10 – 2,5 – no spray application
Type I adjustable from 55 to 78 mm mesh grating 30/10 1.50 to 2.25 1.50 to 2.50 1.50 to 2.50 no spray application
Type II adjustable from 78 to 108 mm mesh grating 30/10 2.25 to 3.40 2.50 to 3.75 2.50 to 3.75 no spray application
Type III adjustable from 108 to 168 mm mesh grating 30/10 3.40 to 4.15 3.75 to 5.25 3.75 to 5.25 no spray application
Bar grating – 2,25 – light spray application Perforated grating – 0,75 – heavy spray application Heelsafe 7/12.5 – 2,5 – light spray application Heelguard 3/8 – 2,5 – light spray application Elongated slot grating – 0,75 – heavy spray application Transverse slotted grating – 0,75 – heavy spray application 30/10 mesh with dirt liner 135 g/m2 Reduction
-30% not recommended (risk of clogging)
Plates (40 mm) on paving support pads Building height 90 mm
Drainage per-formance see above
Recommendation of barrier-free crossings
Plates (40 mm) in double-crushed chips (2/5 mm), with branch channel for draining, building height 90 mm
0,5 Drainage over gravel bed and branch channel
Plates (40 mm) in double-crushed chips (2/5 mm), with drainage mat for (1 cm), building height 90 mm
0,5 Drainage over gravel bed and drainage mat
Plates (40 mm) in double-crushed chips (2/5 mm), building height 90 mm 0,2 Drainage over
gravel bed
The test was arranged on a strand length of 1 m.
345
Bal
con
y/te
rrac
e d
rain
age
Lin
e d
rain
age
8
K9/1
Line drainagePlanning references
Balcony and patio drainage Line drainage
Excerpts from the principles for calculating the rain event
Calculated rain events
Rain according to EN 12056 ■
0.03 l/(sec x m2) equals 300 l/(sec x ha)
Rain according to ■
DIN 1986-100:2008-05 0.0452 l/(sec x m2) equals 452 l/(sec x ha) (r 5.5 for Rosenheim -– so-called 5-minute rain)
Rain according to ■
DIN 1986-100:2008-05 0.0853 l/(sec x m2) equals 853 l/(sec x ha) (r 5.100 for Rosenheim -– so-called rain event of the century)
Calculation for facade channels with elevated cover
ACO Profiline fixed height 75 mm with ■
mesh 30 x 10 = 2.50 l/(sec x m)
Rain yield 0.03 l l/(sec x m ■ 2) (according to EN 12056)
Flagstone paving on paving support ■
pads (open drain)
The facade is set at 50% of the area ■
Sample calculation for the maxi-mum drainage capacity
Hydraulic capacity of the channel: ■
Rain yield x 50% socket for the facade 2.50 l
xsec x m2 x 2
sec x m 0.03 l
Result: 166.5 m facade height per meter of channel strand
Calculation for facade drains with pavement in the gravel bed
ACO Profiline fixed height 75 mm ■
with mesh 30 x 10 = 2.50 l/(sec x m)
Rain yield 0.0853 l l/(sec x m ■ 2) (according to DIN 1986-100 for Rosen-heim)
Flagstone paving in 2/5 gravel bed, ■
0.20 l/(sec x m)
The facade is set at 50% of the area ■
Sample calculation for the mini-mum drainage capacity
Hydraulic capacity of the gravel bed: ■
Rain yield x 50% socket for the facade 0.20 l
xsec x m2 x 2
sec x m 0.0853 l
Result: 4.69 m facade height per meter of channel strand
346
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineGalvanized steel
Balcony and terrace drainage Line drainage
Facade channel elements
Product information
ACO product advantages
Reducing the height of the door junc- ■
tion height to 50 mmSafe and quick drainage of even large ■
quantities of rainAdditional backflow reserve with heavy ■
rainProtection of the interior against ■
moisture penetrationPreventing puddles in the facade area ■
Improved access to the roof drains for ■
maintenance purposesSimple fitting using channel and spring ■
system
Prevents water penetration following ■
wind stress or an accumulation in front of especially vulnerable areas.Safe diversion of rain water via the ■
channel system and side channels with lateral drainage slotsTops for roof drains are arranged via ■
the roofs drains as an inspection shaft
Height-adjustable facade channels
Specific product information
Galvanized steel ■
With integrated gravel strip ■
Without grating ■
Height-adjustability: 55 – 168 mm ■
Ordering information
Grating width Length Article No.55 – 78 78 – 108 108 – 168
[mm] [mm] [mm] [mm]Channel elemtent
L100
1000 38594 38600 38606
500 38595 38601 38607
1301000 36941 36788 36806
500 36940 36789 36807
2501000 36776 36794 36812
500 36777 36795 36813compensating element middle
600100 600 38596 38602 38608
130 600 36948 36790 36808
250 600 36778 36796 36814
compensating element end
600
(80)
100 600 38597 38603 38609
130 600 36956 36791 36809
250 600 36779 36797 36815
End wall
100 38599 38605 38611130 36950 36793 36811250 36781 36799 36817
347
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineGalvanized steel
Balcony and terrace drainage Line drainage
Facade channels with fixed installation height
Specific product information
Galvanized steel ■
With integrated gravel strip ■
Without grating ■
Fixed installation height: 50 mm ■
Ordering information
Grating width Installation height Length Article No.[mm] [mm] [mm]
Channel elemtentL
130
50
2000 38145
1000 38146
500 38147
75
2000 36980
1000 36981
500 36982
L
250 50
2000 38792
1000 38793
500 38794
End wall
13050 3814875 36983
250 50 38795
348
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineGalvanized steel
Balcony and terrace drainage Line drainage
Gratings for facade channels
Product information
Galvanized steel ■
Accessible/wheelchair accessible ■
Bar grating
Specific product information
Ordering information
Length Grating stop Article No.[mm]
Grating width: 130 mm
1000 Screwed 00276500 Screwed 00277
Mesh grating
Specific product information
Ordering information
Length Grating stop Mesh width Article No.[mm] [mm]
Grating width: 100 mm
1000 Screwed 30 x 10 38431500 Screwed 30 x 10 38430
Grating width: 130 mm
1000 Screwed 30 x 10 38433500 Screwed 30 x 10 38432
1000 Screwed 30 x 14 36953500 Screwed 30 x 14 36952
Grating width: 250 mm
1000 Screwed 30 x 10 38435500 Screwed 30 x 10 38434
1000 Screwed 30 x 14 36964500 Screwed 30 x 14 36965
349
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineGalvanized steel
Balcony and terrace drainage Line drainage
Perforated grating
Specific product information
Ordering information
Length Grating stop Article No.[mm]
Grating width: 100 mm
1000 Screwed 38524500 Screwed 38525
Grating width: 130 mm
1000 Screwed 36968500 Screwed 36969
Baton grating
Specific product information
Ordering information
Length Grating stop Article No.[mm]
Grating width: 130 mm
1000 Loosely inserted 38551500 Loosely inserted 38552
Longitudinal baton grating
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 130 mm
1000 Loosely inserted Bar: 3 x 15 mm ■ 38811500 Loosely inserted Bar: 3 x 15 mm ■ 38810
350
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineGalvanized steel
Balcony and terrace drainage Line drainage
Tops and gratings for roof drains
Tops
Specific product information
Galvanized steel ■
Without cover grating ■
Ordering information
Frame dimensionsA
Article No.
[mm]Fixed installation height: 50 mm
5020
A-7 400 x 400 38150
500 x 500 38630
Height-adjustable: 78 – 108 mm
78-108
□A 400 x 400 38801
500 x 500 38631
Mesh gratings
Specific product information
Ordering information
Grating stop Mesh width Description Article No.[mm]
Loosely inserted30 x 10 For tops 400 x 400 mm ■ 3857030 x 14 For tops 400 x 400 mm ■ 3675430 x 10 For tops 500 x 500 mm ■ 38571
351
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineGalvanized steel
Balcony and terrace drainage Line drainage
Accessories
Designation compatible with Description Article No.
C
H
Stacking element
Tops for roof drains ■
Galvanized steel ■
Frame dimensions: ■
400 x 400 mmFixed installation height: ■
30 mm
38685
Tops for roof drains ■
Galvanized steel ■
Frame dimensions: ■
400 x 400 mmFixed installation height: ■
60 mm
38687
Tops for roof drains ■
Galvanized steel ■
Frame dimensions: ■
400 x 400 mmFixed installation height: ■
120 mm
38689
Tops for roof drains ■
Galvanized steel ■
Frame dimensions: ■
500 x 500 mmFixed installation height: ■
30 mm
38691
Tops for roof drains ■
Galvanized steel ■
Frame dimensions: ■
500 x 500 mmFixed installation height: ■
60 mm
38693
Tops for roof drains ■
Galvanized steel ■
Frame dimensions: ■
500 x 500 mmFixed installation height: ■
120 mm
38695
Side channel System Profiline ■
Galvanized steel ■
Component, length ■
2,000 mmConstruction width: ■
100 mmFixed installation height: ■
30 mm
00328
Corner element variable
All Profiline ■
channelsHeight-adjustability: ■
55 – 168 mm 38643
352
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Facade channel elements
Product information
ACO product advantages
Reducing the height of the door junc- ■
tion height to 50 mmSafe and quick drainage of even large ■
quantities of rainAdditional backflow reserve with heavy ■
rainProtection of the interior against ■
moisture penetrationPreventing puddles in the facade area ■
Improved access to the roof drains for ■
maintenance purposesSimple fitting using channel and spring ■
system
Prevents water penetration following ■
wind stress or an accumulation in front of especially vulnerable areas.Safe diversion of rain water via the ■
channel system and side channels with lateral drainage slotsTops for roof drains are arranged via ■
the roofs drains as an inspection shaft
Height-adjustable facade channels
Specific product information
Stainless steel, material grade 304 ■
With integrated gravel strip ■
Without grating ■
Height-adjustability: 55 – 168 mm ■
Ordering information
Grating width Length Article No.55 – 78
mm78 – 108
mm108 – 168
mm[mm] [mm]
Channel elementsL
1001000 38612 38618 38624
500 38613 38619 38625
1301000 36942 36836 36854
500 36943 36837 36855
2501000 36824 36842 36860
500 36825 36843 36861Compensating element middle
600100 600 38614 38620 38626
130 600 36949 36838 36856
250 600 36826 36844 36862
Compensating element middle
600
(80)
100 600 38615 38621 38627
130 600 36958 36839 36857
250 600 36827 36845 36863
End wall
100 38617 38623 38629130 36951 36841 36859250 36829 36847 36865
353
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Facade channels with fixed installation height
Specific product information
Stainless steel, material grade 304 ■
With integrated gravel strip ■
Without grating ■
Fixed installation height: 50 mm ■
Ordering information
Grating width Installation height Length Article No.[mm] [mm] [mm]
Channel elementsL
130
502000 382201000 38221500 38222
75
2000 369851000 36986
500 36987
End wall
13050 3822375 36988
354
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Gratings for facade channels
Product information
Stainless steel, material grade 304 ■
Accessible/wheelchair accessible ■
Bar grating
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 130 mm
1000 Screwed Etched ■ 00272500 Screwed Etched ■ 00273
Mesh grating
Specific product information
Ordering information
Length Grating stop Mesh width Description Article No.[mm] [mm]
Grating width: 100 mm
1000 Screwed 30 x 10 Etched ■ 38439500 Screwed 30 x 10 Etched ■ 38438
1000 Screwed 30 x 10 Electro-polished ■ 38521500 Screwed 30 x 10 Electro-polished ■ 38522
Grating width: 130 mm
1000 Screwed 30 x 10 Etched ■ 38441500 Screwed 30 x 10 Etched ■ 38440
1000 Screwed 30 x 10 Electro-polished ■ 38539500 Screwed 30 x 10 Electro-polished ■ 38540
1000 Screwed 30 x 14 Etched ■ 36955500 Screwed 30 x 14 Etched ■ 36954
Grating width: 250 mm
1000 Screwed 30 x 10 Etched ■ 38443500 Screwed 30 x 10 Etched ■ 38442
1000 Screwed 30 x 10 Electro-polished ■ 38560500 Screwed 30 x 10 Electro-polished ■ 38561
1000 Screwed 30 x 14 Etched ■ 36970500 Screwed 30 x 14 Etched ■ 36971
355
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Perforated grating
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 100 mm
1000 Screwed Etched ■ 38527500 Screwed Etched ■ 38528
1000 Screwed Brushed ■ 38530500 Screwed Brushed ■ 38531
Grating width: 130 mm
500 Screwed Etched ■ 369751000 Screwed Brushed ■ 38544500 Screwed Brushed ■ 38545
1000 Screwed Etched ■ 36974
Heelsafe
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 100 mm
1000 Loosely inserted Grating type: Coarse ■
Brushed ■38563
500 Loosely inserted Brushed ■ 38564Grating width: 130 mm
1000 Loosely inserted Grating type: Coarse ■
Brushed ■37491
500 Loosely inserted Brushed ■ 37492
356
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Heelguard
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 100 mm
1000 Loosely inserted Grating type: Fine ■
Brushed ■38566
500 Loosely inserted Grating type: Fine@@ ■
Brushed ■38567
Grating width: 130 mm
1000 Loosely inserted Grating type: Fine ■
Brushed ■38548
500 Loosely inserted Grating type: Fine ■
Brushed ■38549
Baton grating
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 130 mm
1000 Loosely inserted Blasted ■ 37498500 Loosely inserted Blasted ■ 37499
Slotted grating
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 130 mm
1000 Loosely inserted Etched ■ 38553500 Loosely inserted Etched ■ 38554
357
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Elongated slot grating
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]1000 Loosely inserted Etched ■ 38555500 Loosely inserted Etched ■ 38556
Longitudinal baton grating
Specific product information
Ordering information
Length Grating stop Description Article No.[mm]
Grating width: 130 mm
1000 Loosely inserted Bar: 3 x 15 mm ■
Etched ■38813
500 Loosely inserted Bar: 3 x 15 mm ■
Etched ■38812
358
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Tops and gratings for roof drains
Tops
Specific product information
Without cover grating ■
Ordering information
Frame dimensions Article No.
[mm]Fixed installation height: 50 mm
78-108
□A 400 x 400 38156
400 x 400 38632
Height-adjustable: 78 – 108 mm
5020
A-7 500 x 500 38803
500 x 500 38633
Gratings
Specific product information
Ordering information
Grating stop Mesh width Description Article No.[mm]
For Tops: 400 x 400 mm
Loosely inserted
30 x 10 Mesh grating ■
Etched ■38573
30 x 14 Mesh grating ■
Etched ■36760
30 x 10 Mesh grating ■
Electro-polished ■38576
Perforated grating ■
Etched ■38583
Perforated grating ■
Brushed ■38586
Heelsafe ■
Grating type: Coarse ■
Brushed ■
38589
Heelguard ■
Grating type: Fine ■
Brushed ■
38592
For Tops: 400 x 400 mm
Loosely inserted
30 x 10 Mesh grating ■
Etched ■38574
30 x 14 Mesh grating ■
Electro-polished ■38577
30 x 10 Perforated grating ■
Etched ■38584
Perforated grating ■
Brushed ■38587
Heelsafe ■
Grating type: Coarse ■
Brushed ■
38590
Heelguard ■
Grating type: Fine ■
Brushed ■
38593
359
Bal
con
y an
d t
erra
ce d
rain
age
Lin
e d
rain
age
8
K9/1
Facade channel ProfilineStainless steel, material grade 304
Balcony and terrace drainage Line drainage
Accessories
Designation compatible with Description Article No.
C
H
Stacking element
Tops for roof drains ■
Stainless steel, material ■
grade 304Frame dimensions: ■
400 x 400 mmFixed installation height: ■
30 mm
38686
Tops for roof drains ■
Stainless steel, material ■
grade 304Frame dimensions: ■
400 x 400 mmFixed installation height: ■
60 mm
38688
Tops for roof drains ■
Stainless steel, material ■
grade 304Frame dimensions: ■
400 x 400 mmFixed installation height: ■
120 mm
38690
Tops for roof drains ■
Stainless steel, material ■
grade 304Frame dimensions: ■
500 x 500 mmFixed installation height: ■
30 mm
38692
Tops for roof drains ■
Stainless steel, material ■
grade 304Frame dimensions: ■
500 x 500 mmFixed installation height: ■
60 mm
38694
Tops for roof drains ■
Stainless steel, material ■
grade 304Frame dimensions: ■
500 x 500 mmFixed installation height: ■
120 mm
38696
Side channel System Profiline ■
Stainless steel, material ■
grade 304Component, length ■
2,000 mmConstruction width: ■
100 mmFixed installation height: ■
30 mm
00307
Corner element variable
All Profiline ■
channelsHeight-adjustability: ■
55 – 168 mm 38643