Download - Coating Technology of Tablets
![Page 1: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/1.jpg)
ST.PETERS INSTITUTE OF PHARMACEUTICAL SCIENCES VIDHYANAGAR ,HANMAKONDA
WARANGAL.
PRESENTED BY
B.MAHALAKSHMI
M.PHARMACY, IstSEMISTER
PHARMACEUTICS
![Page 2: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/2.jpg)
HISTORICAL PERSPECTIVEINTRODUCTIONKEY FACTORSTYPES OF TABLET COATING
- FILMCOATING - SUGAR COATING
TABLET DEFECTSADVANCES IN TABLET COATINGCONCLUSIONREFERENCES
CONTENTS
![Page 3: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/3.jpg)
HISTORICAL PERSPECTIVE
Based on Islamic literature (850-923) “Rhazes”
Sugar coating (1800, 1837-1840) for Cubeb and Copaiba
Dr. “Dale wurster”(1950)-Air suspension coater
Abbott laboratories (1953)
Accela cota, Hi-coater, Dria coater
![Page 4: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/4.jpg)
WHAT IS TABLET
COATING?
WHY COAT TABLETS?
INTRODUCTION
4.To Mask Color,
Odour, Taste of the drug
3.Stability
5.Control the release
6.Protection from
GI fluids
DEFINITION
Of coating
1.Identification
2.Improve
elegance
![Page 5: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/5.jpg)
KEY FACTORS
TABLET PROPERTIES - Shape - Tolerance - Surface area
COATING PROCESS - Equipments - Parameters - Facility and ancillary equipment - Automation
COATING COMPOSITION - Polymers - Solvents - Plasticizers - Colorants
![Page 6: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/6.jpg)
Conventional Pan Systems
Perforated Pans Systems
Fluid Bed Systems
COATING PROCESS
Equipments Parameters
Air Capacity
Coating Composition
Tablet Surface Area
Equipment efficiency
Spray application systems
High-pressure air automated systems
Low pressure air automated systems
![Page 7: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/7.jpg)
CONVENTIONAL PANS
Standard Coating Pan
Immersion-tube system
Glatt Immersion
sword system
Pellegrini pan system
![Page 8: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/8.jpg)
PERFORATED PANS
Accela cota system
Hi-coater system
![Page 9: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/9.jpg)
PERFORATED PANS (continue…)
Dria coater pan
Glatt coater
![Page 10: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/10.jpg)
FLUID BED COATING SYSTEMS
![Page 11: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/11.jpg)
SPRAY APPLICATION SYSTEMS
High-pressure airless automated systems
Low-pressure air automated systems
![Page 12: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/12.jpg)
• High pressure airless system• Low pressure air atomized systemDifference in the system is atomization of liquid.• Airless system - Liquid pumped at high pressure (250-3000 psig) through
small orifice, fine spray.Degree of atomization depends on
- Fluid pressure- Orifice size- Viscosity of liquid
• Air atomized - Liquid pumped through large orifice at low pressure (5-50 psig). Air contacts liquid stream at tip of atomizer and fine spray is produced.
Controlling variables- Fluid pressure- Fluid cap orifice- Viscosity of liquid- Air pressure- Air cap design
Choice depends on coating solution composition for a particular product.
![Page 13: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/13.jpg)
TYPES OF COATING PROCESSES
• Three main types are used in the pharmaceutical industry today;
• - Film coating
• - Sugar coating
• - Compression coating
![Page 14: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/14.jpg)
• 1- FILM COATING (the most popular today)
• It involves the deposition, usually by spraying method, of a thin uniform film of a polymer formulation surrounding a tablet.
![Page 15: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/15.jpg)
TYPES OF FILM COATING
FILM COATING
• Immediate release
• Modified release
Types of film coating
![Page 16: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/16.jpg)
Film coating formulation (Composition of the coating liquid)1- Polymer2- Plasticizer3- Colorants4- Solvent (vehicle): Examples: water, ethanol, methanol, isopropranol, chloroform, acetone, methylethyl ketone, and methylene chloride
![Page 17: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/17.jpg)
Ideal characters of coating materialSolubility in the coating solutionSolubility required for intended use- Free water solubility, Slow
water solubility, pH- dependent solubilityCapacity to produce elegant looking productStability in presence of water, heat, moisture, air, and substrate
being coated and no change in properties with aging.Essentially no color, odor, or tasteCompatibility with common coating solution additivesNontoxic and ease of applicationResistance to cracking and should act as barrierNo bridging or filling of the debossed tablet surfaces by the film
formerEase of printing procedure on high-speed equipmentLow cost & Ease of application without specialized equipment
![Page 18: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/18.jpg)
![Page 19: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/19.jpg)
PLASTICIZERS
• Internal plasticizers: Chemical modification of the polymer that alters the physical properties.
– Degree of substitution
– Type of substitution
– Chain length.
• External plasticizers : They are non-volatile or the other polymer, which when include with primary polymeric film former, changes the
– Flexibility
– Tensile strength, or
– Adhesion properties of the resulting film.
![Page 20: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/20.jpg)
Concentration Of Plasticizer Expressed As
- The amount of polymer being plasticized.
• Recommended Level of Plasticizer : 1 to 50% by weight of the film former.
EXAMPLES
• Castor oil; propylene glycol of 200 and 400 series; and surfactants eg; Tweens; Spans; and organic acid esters.
• Water- soluble plasticizer : PEG, propylene glycol.
• Organic- soluble plasticizer : castor-oil and Spans.
![Page 21: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/21.jpg)
COLORANTS
• Colorants may be soluble in the solvent system or suspended as insoluble powders.
• Used to provide distinctive color and elegance to a dosage form.
• To achieve proper distribution of suspended colorants in the coating solutions requires the use of fine-powdered colorants (< 10 microns ).
• Most of colorants are synthetic DYES or LAKES OF DYES approved by the FD&C and D&C.
![Page 22: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/22.jpg)
LAKES : derived from dyes by precipitating with carriers. Eg ; alumina or talc.
• Lakes contains 10 to 30 % of the pure dye content.
• For very light shade, concentration : less than 0.01 %. • For dark shade, concentration : more than 2.0 %
• Examples– Inorganic materials: iron oxides– Natural coloring materials :Anthocyanins, caramel, carotenoids,
chlorophyll, indigo, flavones, turmeric, and carminic acid.
• Various concentrates promoted as achieving less lot-to-lot color variation
• Opalux – Opaquant color concentrate for sugar coating.• Opaspray- Opaque color concentrate for film coating. • Opadry – Complete film coating concentrate
![Page 23: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/23.jpg)
OPAQUANT-EXTENDERS
• These are very fine inorganic powders used in the coating
solution formulation to provide more pastel colors and
increase film coverage.
• Opaquant provides a white coating or mask the color of the
tablet core, and thus the less amount of the colorants are
required.
• Examples: Silicates (talc, aluminium silicate); Carbonates
(magnesium carbonate); Sulfates (calcium sulfate); Oxides
(Mg oxides)
![Page 24: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/24.jpg)
ENTERIC COATING
The technique involved in enteric coating is protection of the tablet core from
disintegration in the acidic environment of the stomach by employing pH
sensitive polymer, which swell or solubilize in response to an increase in pH to
release the drug.
Aims of Enteric protection: To mask taste or odour Protection of active ingredients, from the acidic environment of the stomach. Protection from local irritation of the stomach mucosa. Release of active ingredient in specific target area within gastrointestinal tract.
![Page 25: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/25.jpg)
Enteric Coating
![Page 26: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/26.jpg)
Examples of enteric coated OTC products
• Enteric coated aspirin E.g. Micropirin® 75mg EC tablets
• Enteric coated peppermint oil E.g. Colpermin®
![Page 27: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/27.jpg)
![Page 28: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/28.jpg)
- Typically, tablets are sugar coated by panningtechnique, using traditional rotating sugar-coatingpan with a supply of drying air (thermostaticallycontrolled).
- The pan is automatically rotated, allowing tablets totumble over each other while making contact with thecoating solutions which are gently poured or sprayed,portion wise onto the tablets with warm air blown to hastendrying. Each coat is applied only after the previous coat isdried.
![Page 29: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/29.jpg)
Simplified representation of sugar coating process
![Page 30: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/30.jpg)
![Page 31: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/31.jpg)
SUGAR COATING
• Seal coating • Sub coating • Syrup coating• Color coating• Polishing • printing
![Page 32: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/32.jpg)
1- Sealing (Waterproofing)This involved the application of one or more coats of awaterproofing substance in the form of alcoholic spray, such as pharmaceutical Shellac (traditionally) or syntheticpolymers, such as CAP.( Unless a modified-release feature needs to be introduced, the amount of the sealing coat applied should be carefully calculated so that there is no negative effect on the drug release characteristics in case of immediate release product.) (WHY Sealing?)a- Sugar-coatings are aqueous formulations which allowwater to penetrate directly into the tablet core and thuspotentially affecting product stability and possibly causingpremature tablet disintegration.b- Application of many coats of partially or completelywater-insoluble polymers in this step, enables sugar-coatedproduct to exhibit modified-release pattern (extendedreleaseor delayed "enteric"- release characteristics).
![Page 33: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/33.jpg)
• 2. Subcoating
• - Large quantities of sugar-coatings are usually applied to the tablet core (typically increasing the tablet weight by( 50- 100%)
• WHY?
• In order to round off the tablet edge. Much of this material build-up occurs during this stage and is achieved by adding a bulking agent such as Calcium carbonate, to the sucrose solution.
• - Antiadherents e.g. Talc may be added after partial drying to prevent sticking of the tablets together.
![Page 34: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/34.jpg)
• 3- Smoothing
• The subcoating stage results in tablets with rough surfaces. To facilitate the color application (which requires smooth surface), subcoated tablets are smoothed out by a thick sucrose syrup coating.
• 4- Coloring
• Color coatings usually consist of thin sucrose syrup containing the requisite coloring materials. (water-soluble dyes or water-insoluble pigments may be used) This step must be done into a clean pan deprived of any residues from the previous operations.
![Page 35: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/35.jpg)
• 5- Polishing
• After the coloring step, the tablet surfaces tend to be smooth but somewhat dull in appearance. To achieve glossy finish, final stage involving application of waxes (beeswax carnuba wax) is employed.
• 6- Printing
• Different tablets could be identified by manufacturer' logo,product name, dosage strength or other appropriate code.For sugar-coated tablets, such identification could be only achieved by printing process using special edible inks.
![Page 36: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/36.jpg)
Example of sugar coated tablets Brufen® POM
• Available in 200mg and 400mg strength
Premarin® POM• Conjugated oestrogens 625mcg
(maroon) and 1.25mcg (yellow)
Colofac ® P• Mebeverine hydrochloride
100mg Round, white, sugar coated
Kalms ® GSL• 45mg Hops powder,90mg
Gentian powdered extract, and 135mg Valerian powdered extract
![Page 37: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/37.jpg)
![Page 38: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/38.jpg)
Summary of Polymers used in pharmaceutical formulations as coating
materials.Polymer Trade name Application
Shellac EmCoat 120 N
Marcoat 125
Enteric Coatings Taste/Odor Masking
Cellulose acetate Aquacoat CPD®
Sepifilm™ LP
Klucel®
Aquacoat® ECD
Metolose®
Enteric Coatings Taste masking Sustained release coating Sub coat moisture and barrier sealant pellet coating
Polyvinylacetate phthalate Sureteric® Enteric Coatings
Methacrylate Eudragit® Enteric Coatings Sustained Release Coatings Taste Masking Moisture protection Rapidly disintegrating Films
![Page 39: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/39.jpg)
3- Compression Compression-coating of tabletsAlthough less popular, it gained increased interest in recent years for creating modified-released products involves the compaction of granular materials around preformed tablet core using specially designed tableting equipment. Compression coating is a dry process.
![Page 40: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/40.jpg)
![Page 41: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/41.jpg)
![Page 42: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/42.jpg)
TABLET DEFECTS
STICKING AND PICKING
ROUGHNESS
ORANGE PEEL EFFECTS
BRIDGING AND FILLING
BLISTERING
HAZING/DULL FILM
COLOR VARIATION
CRACKING
![Page 43: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/43.jpg)
Coating Problems
• picking/chipping
• roughness
• sticking
• film cracking/peeling
![Page 44: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/44.jpg)
• BRIDGING & FILLING
• ORANGE PEEL EFFECT
![Page 45: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/45.jpg)
Advances in tablet coatingAdvances in tablet coating
![Page 46: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/46.jpg)
SPECIALIZED COATING TECHNIQUICS
• In this, cores to be coated are a held in a suitable device eg: baskets
• Dipped into coating solution and then dried taking care to prevent
adherence to one another.
• For obtaining more perfect or heavier coats the dipping and drying
steps may be repeated several times one after another.
• Several dipping arrangements are obtainable, amongst them the
sophisticated devices comprise tiny suction tubes, which hold the
individual tablets apart until drying is accomplished.
• Before proceeding to coat additional tablets or begin recoating cycles.
DIP-COATING
![Page 47: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/47.jpg)
SPECIALIZED TECHNIQUICS (continue…)
• Electrostatic coating is employed for applying films of electro-
conductive materials.
• In this, an ionic charge is imparted to the core and an opposite charge
to the coating material. This technology ensures thin, continuous and
electronically perfected film to the surface.
ELECTROSTATIC-COATING
![Page 48: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/48.jpg)
SPECIALIZED TECHNIQUICS (continue…)
LAMINATED-COATING
Laminated coating provides multiple layers for incorporation of
medicament; for example
• Repeat-action tablet, here a portion of the drug is kept in outer lamella
or coating
• Enteric tablet, here one drug could be made available for gastric
absorption while another for release in intestine
• Buccal-swallow tablet, this could first be administered sublingually,
and upon a signal, such as release of flavour from the inner core, the
same may be swallowed as a normal peroral tablet.
![Page 49: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/49.jpg)
SPECIALIZED TECHNIQUICS (continue…)
VACCUM FILM-COATING
This employs a specially designed baffled pan, which is water-jacketed
and could be sealed to achieve vacuum.
Tablets are placed in the sealed pan, the vacuum is applied and the
coating material is introduced through airless hydraulic spray system.
Since the pan is completely sealed.
Organic solvents could be effectively used with minimal
environmental or safety concern.
![Page 50: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/50.jpg)
ADVANCED TECHNIQUICS
SUPERCELL-COATING
Supercell coating technology is an invention of Niro Pharma,
which uses a small modular design where tablets are coated in
batches ranging from 30 to 40 grams, and which is amenable to
linearly scale up to the production capacities.
In this, typically tablets are coated with coating spray in the
same direction as the drying gas, hence, resulting in a more
efficient process.
![Page 51: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/51.jpg)
ADVANCED TECHNIQUICS
SUPERCELL-COATING (continue…)
![Page 52: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/52.jpg)
• Dry coating avoids the use of water or, at least, allows it to be reduced to very small amounts with respect to the coating material, thus overcoming the need for time- and energy-consuming drying phases, as well as possible drug stability issues.
• In this technology, powdered coating materials are directly coated onto solid dosage forms without using any solvent, and then heated and cured to form a coat.
DRYCOATING
![Page 53: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/53.jpg)
• Plasticizer-dry-coating
• Electrostatic-dry-coating
• Heat-dry-coating
• Plasticizer-electrostatic-heat-dry-coating
CURRENT DRY COATING TECHNOLOGIES
![Page 54: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/54.jpg)
PLASTICIZER DRY COATING
Film formation in the plasticizer-dry-coating
The film formation is the combined response of improved viscous flow and particle deformation resulted from plasticizer and heat. Applications - Both tablets and pellets can be coated.
Limitations
- Coat thickness increases with increasing plasticizer concentration.- However,surplus plasticizer leads to very soft or sticky films.
![Page 55: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/55.jpg)
ELECTROSTATIC-DRY-COATING
Schematic diagram of: (a) an electrostatic coating apparatus for solid dosage forms. (10) tablet feeding chute; (12, 12) rotary drum; (16, 16) electrostatic spraying gun; (18, 18) tray to hold particles; (20, 20) infrared ray heater; (22) tablet collection chute; (A) preconditioning station; (B) coating station; (C) fusing station.
![Page 56: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/56.jpg)
Applications
• This special design aims at making every tablet effectively grounded, and directing and restricting the charged particles onto the tablet surface without spraying onto the surrounding, by which the coating efficiency is greatly improved.
• Moreover, the two sides of a tablet may be coated with different color or different formulation.
Drawbacks
• This apparatus was found unable to focus all charged powder to the tablets but the drum also received some powder. This is wasteful of powder and also makes cleaning of the apparatus time consuming.
![Page 57: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/57.jpg)
(1) rotating disk; (2) infrared lamp; (3) powder feeder; (4) temperature probe; (5) coating tablets; (6) glass cover
Heat-Dry-Coating
![Page 58: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/58.jpg)
• The advantages of heat-dry-coating include abandoning plasticizer for lower Tg film-forming polymers or avoiding high concentrations of plasticizer because of pre-plasticization.
• However, it is still a challenge for heat-dry-coating technology to get a smooth, uniform and thick coating only by the help of heat-based adhesion.
![Page 59: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/59.jpg)
PLASTICIZER-ELECTROSTATIC-HEAT-DRY-COATING
Coating process comprises the steps
• Positioning pre-heated solid dosage forms in a chamber of a rotatable, electrically grounded pan coater
• Spraying powdered coating materials and plasticizer on the solid dosage forms in the pan coater during rotation there of for a pre-selected length of time using an electrostatic spray gun
• Curing the coated solid dosage forms to form continuous, uniform and flexile coats.
It is an integration of five kinds of “forces”:
- Softening or melting effects
- Wetting
- Electrostatic attraction forces
- Hydrodynamic force
- Mechanical force.
• These are combined to enhance the adhesion of powdered coating materials to solid dosage surface.
![Page 60: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/60.jpg)
Applications
• Conventional coating pharmaceutical polymers,such as Eudragit RS, Eudragit RL, Eudragit L, Eudragit EPO in combination with standard excipients were successfully coated onto tablets and beads.
• Produce smooth and uniform coating surfaces with controlled coating thickness on both larger dosage forms and smaller ones.
Limitations
Particularly applicable for pharmaceutical coating only with
a single colour.
![Page 61: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/61.jpg)
CONCLUSIONCONCLUSION
![Page 62: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/62.jpg)
ADVANTAGES OF TABLET COATING
Enhance palatability, mask unpleasant taste, odour and color of the
API
Increase the stability
Increase the mechanical integrity
Enhance the elegance
Protect the patient
Modify the drug release profile
Avoid the side effects
![Page 63: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/63.jpg)
REFERENCES
www.pubmed.comwww.wikipedia.com
www.google.com
websites
The science and Practice of Pharmacy, Remington Volume 1
The Theory and Practice of Industrial Pharmacy by A. Lachman, 3rd Edition
Pharmaceutical Dosage forms by Liberman, Volume 3
![Page 64: Coating Technology of Tablets](https://reader033.vdocuments.net/reader033/viewer/2022061200/5476e910b4af9fc30a8b6407/html5/thumbnails/64.jpg)
THANK YOU
FOR
YOUR ATTENTION