Upload File

Download - Covid-19 Ergonomic rotatory Shield · 4.73 hrs 1 pcs f 0.20 mm k 0.40 mm h 1 44.00 g d Prusa MK3/S Print Files (.gcode) DOWNLOAD ALL FILES 3.6 MB 4.73 hrs f 0.20 mm k 0.40 mm h PLA

Transcript

  • SummaryI wanted to create a shield for covid-19 from scratch to meet the needsthat my mother found in the hospital, where the few protections left thatwere provided were of low quality and bad design, this project of mineimplements the possibility of rotating the protection of 90 degrees abovethe head so as to take a moment of air between a break and the otheroutside the emergency area covid ... no particular precautions are requiredin the press, but in its assembly some indications must be followed whichare: once printed all the parts you will notice that 3 pieces have beenprinted the higher one with two ring nuts and the attachment for theelastic is to be used as attachment for the head named (struttura testa) ..and must be kept upwards as it has been studied, the arrow on the modelmust point upwards, for assembly proceed by taking an elastic band andcutting it into a section that can enter the internal rotation circle afterwhich the semicircle door named "struttura porta pannello" must beinserted, inserted the elastic section inside to make spring effect (the redpiece you see in the picture is a piece of elastic used to make spring effectand to make the click of the mask work properly) and inserted by forcewith a drop of superglue the circle on the cylinder of the panel holdernamed (blocca struttura pannello), the images will illustrate and removeany doubt .. I think that today is the best and most comfortable shieldagainst the covdi-19 simple and comfortable... sorry for my bad englishbut i'm italian .. happy printing...

    Ps : upload a Gcode only for Mk3s.

    M Matteo

    Covid-19Ergonomic rotatoryShield

    VIEW IN BROWSER

    updated 22. 4. 2020 | published 17. 4. 2020

    https://www.prusaprinters.org/social/53706/printshttps://www.prusaprinters.org/social/53706/printshttps://www.prusaprinters.org/social/53706/printshttps://www.prusaprinters.org/social/53706/printshttps://www.prusaprinters.org/social/53706/printshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shieldhttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield

  • 4.73 hrs

    1 pcs f

    0.20 mmk

    0.40 mmh 1

    44.00 g d

    PrusaMK3/S

    Print Files (.gcode) DOWNLOAD ALL FILES

    3.6 MB

    4.73 hrs f 0.20 mm k 0.40 mm h PLA 44.00 g d PrusaMK3/S

    updated 17. 4. 2020

    Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

    310.0 KBupdated 17. 4. 2020

    140.6 KBupdated 17. 4. 2020

    21.8 KBupdated 17. 4. 2020

    8.1 KBupdated 22. 4. 2020

    UPDATE : added a simple safety clip to prevent the plastic from escapingthe shield (clip ferma visiera)

    Healthcare > Accessibility

    0.2 layer 20% infil Pla or Petg...

    face-shield-covid19_02mm_pla_mk3s_4h44m.gcode

    struttura-testa.stl

    struttura-porta-pannello.stl

    blocca-struttura-pannello.stl

    clip-ferma-visiera.stl

    https://www.prusaprinters.org/prints?categoryId=87https://www.prusaprinters.org/prints?categoryId=88https://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/fileshttps://www.prusaprinters.org/prints/29861-covid-19-ergonomic-rotatory-shield/files

  • License This work is licensed under a Creative Commons (4.0 International License)

    Attribution-ShareAlike

    ✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition

    http://creativecommons.org/licenses/by-sa/4.0/http://creativecommons.org/licenses/by-sa/4.0/http://creativecommons.org/licenses/by-sa/4.0/http://creativecommons.org/licenses/by-sa/4.0/http://creativecommons.org/licenses/by-sa/4.0/http://creativecommons.org/licenses/by-sa/4.0/

    Covid-19 Ergonomic rotatory ShieldSummaryPrint Files (.gcode)face-shield-covid19_02mm_pla_mk3s_4h44m.gcode

    Model Files (.stl, .3mf, .obj, .amf)struttura-testa.stlstruttura-porta-pannello.stlblocca-struttura-pannello.stlclip-ferma-visiera.stl

    LicenseAttribution-ShareAlike


Top Related

PEAK QUALITY BLADES - Mozart Blades Solingen / n · PDF fileCello blade, rounded ends 57 x 18.8 x 0.40 mm ... è Blade thickness 0.10 - 1 mm è Double-sided ground geometry, double
PEAK QUALITY BLADES - Mozart Blades Solingen / n · PDF fileCello blade, rounded ends 57 x 18.8 x 0.40 mm ... è Blade thickness 0.10 - 1 mm è Double-sided ground geometry, double
Keysight 1GG6-4208 DC to 30 GHz Differential FET Limiting ... · – Lead pitch: 0.40 mm (0.016 in) – Lead width: 0.20 mm (0.008 in) Description The 1GG6-4208 is a differential
Keysight 1GG6-4208 DC to 30 GHz Differential FET Limiting ... · – Lead pitch: 0.40 mm (0.016 in) – Lead width: 0.20 mm (0.008 in) Description The 1GG6-4208 is a differential
Painéis VELFAC - Vidros - arodesenho.com · Valor U painel Painel com isolamento (λ=0.037) e Painel interior aro 90 mm aro 115 mm Vidro Esmaltado (vidro 24 mm) 0.40 0.32 Vidro Esmaltado
Painéis VELFAC - Vidros - arodesenho.com · Valor U painel Painel com isolamento (λ=0.037) e Painel interior aro 90 mm aro 115 mm Vidro Esmaltado (vidro 24 mm) 0.40 0.32 Vidro Esmaltado
Magnifying glass holder - media.prusaprinters.org€¦ · Magnifying glass holder VIEW IN BROWSER updated 16. 5. 2019 | published 16. 5. 2019 1 hrs 1 pcs f 0.20 mm k 0.40 mm h PLA
Magnifying glass holder - media.prusaprinters.org€¦ · Magnifying glass holder VIEW IN BROWSER updated 16. 5. 2019 | published 16. 5. 2019 1 hrs 1 pcs f 0.20 mm k 0.40 mm h PLA
Section Page Section Page - 325_c... · 2018-04-27 · Ponderosa Pine 0.40 0.40 0.40 0.21 0.11 Red Pine 0.40 0.40 0.40 0.21 0.11 Spruce−Pine−Fir NR1 0.40 NR NR NR Redwood NR NR
Section Page Section Page - 325_c... · 2018-04-27 · Ponderosa Pine 0.40 0.40 0.40 0.21 0.11 Red Pine 0.40 0.40 0.40 0.21 0.11 Spruce−Pine−Fir NR1 0.40 NR NR NR Redwood NR NR
Premium Straight - sabettimed.com Premium_66939.pdf · con passo di 1.00 mm e profondità di 0.40 mm. L’impianto Ø 3.30 mm si caratterizza per avere il passo del filetto di 0.60
Premium Straight - sabettimed.com Premium_66939.pdf · con passo di 1.00 mm e profondità di 0.40 mm. L’impianto Ø 3.30 mm si caratterizza per avere il passo del filetto di 0.60
benindo.com · Seng Gelombang Warna GL Il Lembaran : 80 cm x 180 cm x 0.23 mm Custom : 80 cm x Panjang Custom Ketebalan 0.25 mm — 0.40 mm Atap Galvalum Warna GL 9 Lebar Efektif
benindo.com · Seng Gelombang Warna GL Il Lembaran : 80 cm x 180 cm x 0.23 mm Custom : 80 cm x Panjang Custom Ketebalan 0.25 mm — 0.40 mm Atap Galvalum Warna GL 9 Lebar Efektif
SANAYİ JİLETLERİ ÜRÜN KATALOĞU - Alya Tekstil San. … · 2016-12-17 · Chisel A B Hollow Ground B C ... B302(10A) 40 x 7.8 x 0.40 mm 40 mm 65 7.8 mm B304(12) 37 x 11 x 0.40
SANAYİ JİLETLERİ ÜRÜN KATALOĞU - Alya Tekstil San. … · 2016-12-17 · Chisel A B Hollow Ground B C ... B302(10A) 40 x 7.8 x 0.40 mm 40 mm 65 7.8 mm B304(12) 37 x 11 x 0.40