Download - Dashboard and immobilizer new features
33
Dashboard and immobilizer Dashboard and immobilizer new featuresnew features
4
2
DashboardDashboard
User interfaceUser interface
LCDLCD
1
Tuono 1000Tuono 1000
The dashboard is the Matrix type, already used on SR 50 i.e. and The dashboard is the Matrix type, already used on SR 50 i.e. and
Pegaso 650 Strada but with a few different features that we shall see Pegaso 650 Strada but with a few different features that we shall see
in detailsin details
11 DisplayDisplay
22 Fault lightFault light
33 Side standSide stand
44 Neutral sensorNeutral sensor
55 RpmRpm
66 Turn indicatorTurn indicator
77 High beamHigh beam
88 Fuel reserveFuel reserve
Dashboard and immobilizer new Dashboard and immobilizer new featuresfeatures
The controls allowing the user to move through the various display functions are a The controls allowing the user to move through the various display functions are a three-position selector and a push-button located on the left dimmer switch.three-position selector and a push-button located on the left dimmer switch.
The selector positions are:The selector positions are:
- Trip 1- Trip 1
- Trip 2- Trip 2
- Mode- Mode
If set to the first position TRIP1 data will be shown, If set to the first position TRIP1 data will be shown,
if set to the second position TRIP2 data will be shown,if set to the second position TRIP2 data will be shown,
while if set to the MODE position will give access to dashboard configuration mode. while if set to the MODE position will give access to dashboard configuration mode.
User interfaceUser interface
KEY-ONKEY-ON
Selector: MODESelector: MODE
Time or Lap time Time or Lap time display shall be display shall be selected using the selected using the LAP TIMER LAP TIMER sub-menusub-menu
At key-on two letters S At key-on two letters S (suspension) and T (tire) (suspension) and T (tire) come on to detect the come on to detect the possible control units possible control units managing suspension set-up managing suspension set-up and tyre pressure and and tyre pressure and temperaturetemperature
The dashboard – LCDThe dashboard – LCD
Selector: MODESelector: MODE
Press the SET key to Press the SET key to display battery voltage (only display battery voltage (only when vehicle is stopped) when vehicle is stopped) and vehicle speedand vehicle speed
Hold the SET key to see the Hold the SET key to see the MENU pageMENU page
The dashboard – LCDThe dashboard – LCD
Selector: Trip 1 & 2Selector: Trip 1 & 2
In place of odometer reading, trip meters 1 and 2 are displayed, briefly press the In place of odometer reading, trip meters 1 and 2 are displayed, briefly press the Set button to alternately see:Set button to alternately see:
Trip meter 1-2Trip meter 1-2
Riding time 1-2Riding time 1-2
Top speed 1-2Top speed 1-2
Average speed 1-2Average speed 1-2
Tyre pressure and temperatureTyre pressure and temperature
Shock absorber and fork click Shock absorber and fork click settingssettings
These two last functions are not activeThese two last functions are not active
ExampleExample Trip 1 and Riding time 1 Trip 1 and Riding time 1
The dashboard – LCDThe dashboard – LCD
Alarm indicationAlarm indication
The icon normally indicating the The icon normally indicating the temperature flashes to indicate temperature flashes to indicate overtemperatureovertemperature alarm alarm (temperature received by ECU (temperature received by ECU above or equal to 115°)above or equal to 115°)
The The ’SERVICE’’SERVICE’ alarm is alarm is displayed in case of active ECU displayed in case of active ECU or dashboard alarms. The oil or dashboard alarms. The oil can icon indicates that the ECU can icon indicates that the ECU output output Oil Pressure Error Oil Pressure Error signal signal
The dashboard – LCDThe dashboard – LCD
If the fuel reserve warning light turns on, If the fuel reserve warning light turns on, after about 2 km, the "distance to empty" after about 2 km, the "distance to empty" is calculatedis calculated
Distance to emptyDistance to empty
Alarm indicationAlarm indication
The Overtemperature and Oil pressure Alarm indications go off as soon as the The Overtemperature and Oil pressure Alarm indications go off as soon as the fault is cleared, while the Service indication (ECU or dashboard errors) goes off fault is cleared, while the Service indication (ECU or dashboard errors) goes off only when key is turned OFFonly when key is turned OFF
The dashboard – LCDThe dashboard – LCD
OPERATING MODE: DIAGNOSIS MENUOPERATING MODE: DIAGNOSIS MENU
13432
ExitExit
ECU diagnosticsECU diagnostics
Dashboard errorsDashboard errors
Delete errorsDelete errors
Reset serviceReset service
UpdateUpdate
Change keysChange keys
Km/MilesKm/Miles
The dashboard – LCDThe dashboard – LCD
OPERATING MODE: ECU DIAGNOSTICSOPERATING MODE: ECU DIAGNOSTICS
ExitExit
ECU diagnosticsECU diagnostics
Dashboard errorsDashboard errors
Delete errorsDelete errors
Reset serviceReset service
UpdateUpdate
Change keysChange keys
Km/MilesKm/Miles
The dashboard – LCDThe dashboard – LCD
OPERATING MODE: ECU DIAGNOSTICSOPERATING MODE: ECU DIAGNOSTICS
This function only displays live errors. This function only displays live errors.
SAE fault code SAE fault code
Aprilia fault codeAprilia fault code
Aprilia fault description in EnglishAprilia fault description in English
If no Aprilia code is associated to the SAE code, this indication is shownIf no Aprilia code is associated to the SAE code, this indication is shown
The dashboard – LCDThe dashboard – LCD